In case no one has mentioned it, you can lock down the pan feature on the magpul bipod. You can find directions on the internet and probably here on RUclips. It’s easy to do.
I like the video, everyone has a use case when they consider their particular capabilities they want to lend their selves when they choose a weapon configuration. I also can appreciate your forward thinking when you set this rifle up. I clicked the video to see what that cheek riser was, I need a little more info if you have the time. First I would like to know of the dexterity of that riser, have you had problems with shift or loosing, has it fallen off? Next the install, how does it fixate? Lastly what optic height are you running on that LPVO mount, and is that height that it sits at in good relation with your cheek weld with that riser, I Wana take a stab at it and say it sits lower 1/3 but please tell me for sure. Ok now lastly for real this time, do you think that cheek riser would be optimal for a 2.26 ride height mount? I just don't like some of the options on the market for cheek risers I want a full stock cheek riser, I don't like the designs where it's just a small section raised I feel like it creates unnecessary snags and gives more of a neck weld than a cheek weld, but I like that one you have and I hope you can find the time to answer those questions.
Thank man for the positive comment! The cheek riser is a Magpul 0.50" they have about three different heights. I would try them to see which works best for you and your body. What I have might not work the same for you so testing them out wouldn't be a bad idea. Haven't had any issues with it coming off or shifting on me. The Magpul CTR buttstock has some indentions on either side that allow the riser to fit nice and snug. They're both from the same company.
@@MattTacticalFitness solid thanks brother, I was unaware they offered different heights. About how much did you trim in order to not run into the charging handle problem?
@@austinplatt8011 I don’t know the exact measurement but I would place it on the stock and cut little by little. Pull the charging handle back to make sure it clears. That should be your main concern as far as cutting the riser where you need to
Very nice build with well thought-out, quality parts. Anyone would be lucky to have a setup like this. I gotta be honest though, fam. This is NOT a do it all rifle. It's an SPR. Imagine having to clear trenches with this hoss! Lose the bipod, foregrip, and all those stock gizmos and this will be a lot closer to "Do It All". The lighter the rifle, the longer you can fight.
I disagree and agree. All the parts make this a very diverse build. However I agree some of it is gear creep potentially. All the parts are good quality parts and brands, just some not necessary really. I had to strip parts off my rifles after getting out and shooting at a little distance cause I realized it was purely my inexperience shooting.
Let me clarify also, it's not that the parts don't have a place, but depending on the role, and easier option instead of removing gear might be to get a second stock to swap the bag rider one out until maybe doing more a prs style match. The bipod, get like an adm qd w/Harris type thing or one of the magpul sling ones so it can be taken off until needed. Overall, it's a beautiful build and if it works for you then that's amazing.
@@MattTacticalFitness Just never get legally married here in the US. Unless you want the family courts to steal your house, 401k and around 70 percent of your assets. Protect yourself at all times guys.
@MattTacticalFitness Thanks for checking. Do you ever feel it's a bit too unweildy sometimes? I'm considering going the magnifier route with the Unity Fast mounts, but wondering if it will make the gun too heavy at that point.
@@RockerMat91 Yeah this rifle definitely has its place. I have another rifle with a eotech/ magnifier on a riser and that’s a great set up as well. Can’t go wrong with either.
@@MattTacticalFitnessdude, don't sweat it at all. I've heard a LOT of guys say "LVPO" it makes absolutely no difference. If someone gets upset at that, they have absolutely nothing better to be upset about.
@Operatoroveralls Hey, thanks a lot, I appreciate it. Just started this RUclips thing and getting the hang of talking to the camera and all. Just learning from my mistakes!
Tell me you copied and pasted every tacticool instagram rifle setup ever seen without telling me you copied and pasted every tacticool instagram rifle setup ever seen. Quality parts does not a shooter make my friend.
@@MattTacticalFitness It's a solid build man. Just yanking your chain. Curious how far you've stretched its legs? What ammo are you running through it? Build a dope card for it. Do a video on your chosen support equipment for this setup.
Nice setup but there isn’t a such thing as a do it all rifle. Every build has strengths and weaknesses. I have different rifles for different situations. I can never make the claim that something does it all.
@@ironpanther689 You’re definitely right! That’s why later in the video I mentioned there is no such thing as a “do it all” Rifle Setup. This is just something I believe is close to it in my opinion. If I could only choose one.
![OhGeesy x Lefty Gunplay - What It Iz [Official Music Video]](http://i.ytimg.com/vi/L0yzW9t2ixk/mqdefault.jpg)
![The M4 vs M7 Sig Spear NGSW [feat. GBRS Group]](/img/1.gif)
In case no one has mentioned it, you can lock down the pan feature on the magpul bipod. You can find directions on the internet and probably here on RUclips. It’s easy to do.
Wow! Best build I’ve seen! Great job
Thank you for sharing Matt
Great rifle man definitely a versatile setup
Thanks man I appreciate it! Watch a lot of your videos
wow Recce Randy and G-thumb mentioned in the same breath. Moving up in the world.
@@wisemencompany Haha
You can lock out the panning on the bipod.
Would like to see it when you get the upgrades done. Good concept overall, it gave me some of ideas for mine.
I’d recommend trying out the b5 stocks. They are much more squared up at the rear and avoid needing extra pieces to get there
@@bigfootgoesboom Alrighty, I’ll have to give them a shot and try it out. Thanks
Loved your video ❤
Nice rig!!!
Good build bud. Great job
Thanks man!
So neat so sweet 👍🏽
@@StilettoCraft thank you!
Damn that thang is tight. 👌
You can lock out the pan feature on the Magpul bipod. There are videos on it here.
@@christrigg7589 Oh thanks bro
Goog job on the build!
@@revolutionanarchy713 thanks!
Nice build bro
@@Blackicanops Thanks man I appreciate it
@@MattTacticalFitness no problem bro I love your content I’ll be subscribing 🙏🏼
@Blackicanops Thanks brotha! I Iike your channel as well
Solid setup. Once you get a suppressor you’ll be solid. Then after that get your LAM along with your night vision setup and you’ll be squared away.
@@wildcat8598 That’s the goal!
I like the video, everyone has a use case when they consider their particular capabilities they want to lend their selves when they choose a weapon configuration. I also can appreciate your forward thinking when you set this rifle up. I clicked the video to see what that cheek riser was, I need a little more info if you have the time. First I would like to know of the dexterity of that riser, have you had problems with shift or loosing, has it fallen off? Next the install, how does it fixate? Lastly what optic height are you running on that LPVO mount, and is that height that it sits at in good relation with your cheek weld with that riser, I Wana take a stab at it and say it sits lower 1/3 but please tell me for sure. Ok now lastly for real this time, do you think that cheek riser would be optimal for a 2.26 ride height mount? I just don't like some of the options on the market for cheek risers I want a full stock cheek riser, I don't like the designs where it's just a small section raised I feel like it creates unnecessary snags and gives more of a neck weld than a cheek weld, but I like that one you have and I hope you can find the time to answer those questions.
Thank man for the positive comment! The cheek riser is a Magpul 0.50" they have about three different heights. I would try them to see which works best for you and your body. What I have might not work the same for you so testing them out wouldn't be a bad idea. Haven't had any issues with it coming off or shifting on me. The Magpul CTR buttstock has some indentions on either side that allow the riser to fit nice and snug. They're both from the same company.
@@MattTacticalFitness solid thanks brother, I was unaware they offered different heights. About how much did you trim in order to not run into the charging handle problem?
@@austinplatt8011 I don’t know the exact measurement but I would place it on the stock and cut little by little. Pull the charging handle back to make sure it clears. That should be your main concern as far as cutting the riser where you need to
@@MattTacticalFitness got it thank you.
Looks good. What does it weigh?
@@BillyWillicker Just weight it 10.5 lbs
Very nice Matt. Maybe, you can help me build one of my own.
Yeah we can build yours soon!
I need to buy me one.
Help me convince my wife I need this
Haha yeah we gotta convince her!😂
What is your thought process on having no back up iron sites?? Ps love the rifle
I have thought about putting some backup irons I just haven’t done it yet. My back up would be my red dot mounted on top of the LPVO
@@MattTacticalFitness ok I understand plus the red dot is a aim point so that says something but thank you 🙏🏻
@@SuperScooter22 Of course man
Very nice build with well thought-out, quality parts. Anyone would be lucky to have a setup like this. I gotta be honest though, fam. This is NOT a do it all rifle. It's an SPR. Imagine having to clear trenches with this hoss! Lose the bipod, foregrip, and all those stock gizmos and this will be a lot closer to "Do It All". The lighter the rifle, the longer you can fight.
Well this was a dumb comment.
Thanks, I appreciate your input!
I disagree and agree. All the parts make this a very diverse build. However I agree some of it is gear creep potentially. All the parts are good quality parts and brands, just some not necessary really.
I had to strip parts off my rifles after getting out and shooting at a little distance cause I realized it was purely my inexperience shooting.
Let me clarify also, it's not that the parts don't have a place, but depending on the role, and easier option instead of removing gear might be to get a second stock to swap the bag rider one out until maybe doing more a prs style match. The bipod, get like an adm qd w/Harris type thing or one of the magpul sling ones so it can be taken off until needed.
Overall, it's a beautiful build and if it works for you then that's amazing.
@@matthewriegner5180 That’s actually a great idea man. I’ll consider doing that for sure!
Smart dude here, fitness is probably number 1. Never understood the fat tacticool guys.
@@methanesprings4085 Thanks!
@@MattTacticalFitness Just never get legally married here in the US. Unless you want the family courts to steal your house, 401k and around 70 percent of your assets. Protect yourself at all times guys.
Nice set up…. How much does it weigh. Just sub’d. Keep going
@@Citizen2ACitizenLLC Thank you! It’s 10.5 lbs
Thanks man!
Nice setup. How much does it weigh?
Def over 12 pounds
@@RockerMat91 not sure exactly but probably around 10-12 lbs
@@RockerMat91 just weight it 10.5 lbs
@MattTacticalFitness Thanks for checking. Do you ever feel it's a bit too unweildy sometimes? I'm considering going the magnifier route with the Unity Fast mounts, but wondering if it will make the gun too heavy at that point.
@@RockerMat91 Yeah this rifle definitely has its place. I have another rifle with a eotech/ magnifier on a riser and that’s a great set up as well. Can’t go wrong with either.
Just letting you know it’s lpvo not lvpo
@@bigfootgoesboom thanks brotha!
haven't you heard of Low variable power optics?
How much for three bipod
It’s around $70
By no means this is a bad thing but this is obviously a super duty not URGI. Super duty is slightly nicer anyways.
@@not_your_business666 Thanks brotha I appreciate it!
How much does that bad boy weigh?
@@Dan-b2j 10.5 Lbs!
what accessories do u want on ur rifle ?
yes please
@@cordellej Might get a suppressor soon!
Bro if ur worried about the weight savings between a short light and a long light ur into the wrong thing
Thanks bro!
Very
Nice well done !
The instagram special. Gear over all everything
@@xDeVeYx of course I have brotha!
After I heard this guy say LVPO multiple times I disregarded everything else he said.
Haha thanks man you’re right. I messed up when I mentioned it in the video.
@@MattTacticalFitnessyou did fine don’t worry about this sped
@@snowball8360 Haha thanks Tony😘
@@MattTacticalFitnessdude, don't sweat it at all. I've heard a LOT of guys say "LVPO" it makes absolutely no difference.
If someone gets upset at that, they have absolutely nothing better to be upset about.
@Operatoroveralls Hey, thanks a lot, I appreciate it. Just started this RUclips thing and getting the hang of talking to the camera and all. Just learning from my mistakes!
By my snobbish personal standards...
...that, Sir...is not a "rifle". It is a Long Gun.
Yeah this should clearly be a bullpup
Tell me you copied and pasted every tacticool instagram rifle setup ever seen without telling me you copied and pasted every tacticool instagram rifle setup ever seen. Quality parts does not a shooter make my friend.
You’re definitely right sir thank you!
@@MattTacticalFitness It's a solid build man. Just yanking your chain. Curious how far you've stretched its legs? What ammo are you running through it? Build a dope card for it. Do a video on your chosen support equipment for this setup.
@@DTOM_1776 he doesn't fuckin know lol 😂 I'd be surprised if the gun has even seen a range day
Nice setup but there isn’t a such thing as a do it all rifle. Every build has strengths and weaknesses. I have different rifles for different situations. I can never make the claim that something does it all.
@@ironpanther689 You’re definitely right!
That’s why later in the video I mentioned there is no such thing as a “do it all” Rifle Setup. This is just something I believe is close to it in my opinion. If I could only choose one.
He said there is technically not a “do it all” rifle within the first 30 seconds of the video
Brother eww
Get a cover for your rifle light!