Hey Henry, Got another couple questions... 1) ok remember in one video you were showing that like cut off valve that Helps out the setup, hose, brush everything from Well turning everything into a shit show? What is it called and where do I get it? 2) What Accessories is needed to set the DI filter tanks to the 100-200 gallon tank? 3) Now have you examined the Sola Tecs ($1000) Telescoping Pole and seen if a Same concept but cheaper pole where once clamped (opposite of where brush gets attached) and fitted into Pole where water goes thru one end, thru & out pole but change both ends (Male & Female) to Sola Tecs ends so the Goose neck can connect following obviously the C1000 to save like $700 bucks?... ....
Ok I actually got most those questions answered somewhere else but I still need the question, what size gallon tank do you have and is it the original tank now on the 2.0
Thank you for the video guys! On your quick connect you have a quick connect attachment going into a hose where do you get that connector or does it come in that kit?
@@socalsolarpanelcleaningcompany now do u just use water to clean panels??? I was told u can’t use any product to clean panels. Thanks for all your help. Really motivated me to start my sole panel journey? U guys ever do ride alongs ? I can learn from my mentors .
Yes but each city here is different due to hardness in the water .I suggest emailing the manufacturer I'm sure they could answer the question for your area
Great content 👍🏾. I always enjoy your videos and work. Is there a system that uses a pressure washer with pure water (like an RO or DI pressure washing system)?
4) Final but Importantly Last which is that system is going to have leak slowly pushing out water beads as does in the fitting on yours in the (Mark) last segment where your Running the System in the 2.0 Video, which I'm asking cause my process of leveling out floor board and setting up system which if its exuding enough water to see puddles then I'd like to modify my flooring at a small tilt with a modified at the end or sides or something making a troph with a plastic liner to catch the water that after every Job I can then pull out the liner and dispose or recycle however I'd like or Does it not leak (itty bitty to small leaks I hear are inevitable to happen if not right after building and fastening everything on set up the the near future which your video proves it) to even worry about?
Hello Henry, I saw a video of you and your partner cleaning solar panels at a couple of customer's homes and you showed a water fed brush-extension pole (red and black) you used when you started your business before getting the more efficient/time saving/bigger/Sola-Tec brush. Could you please provide a link/brand to that product? I am a home and solar panels owner and would like to be able to clean my own panels without spending too much on a professional brush. Great and very informative videos.
Also the DI tanks you have posted to buy, the PPM is 250 with a 550 gallon capacity, does that mean they are only good for 550 gallons? Also are those DI Tanks able to have there resin and filter inside recharged manually by me?
Great video
Love ya Brother! Thanks!
You are so welcome
I need the brush but very expensive in my country
Hello Henry. I can't see the links
They are in the description under this video sir...I just checked them.
Do you need the pressure washer to work the Water-feed pole and brush?
Not that waterfed pole and brush
Love the content. Where do I get the other piece that connects the tube to the quick release you show?
window cleaning products wcr my link is below
Great video yet again. So informative.
Thanks again!
Nice information
Would u mind making a video on how u clamp your ladder ? Maybe on where u harness your self when in roof??
We have a video on that check our ladder safety video
Again I appreciate the responses with proper answers you seem to have always given me, Thanks!!!
Hey Henry, Got another couple questions... 1) ok remember in one video you were showing that like cut off valve that Helps out the setup, hose, brush everything from Well turning everything into a shit show? What is it called and where do I get it?
2) What Accessories is needed to set the DI filter tanks to the 100-200 gallon tank?
3) Now have you examined the Sola Tecs ($1000) Telescoping Pole and seen if a Same concept but cheaper pole where once clamped (opposite of where brush gets attached) and fitted into Pole where water goes thru one end, thru & out pole but change both ends (Male & Female) to Sola Tecs ends so the Goose neck can connect following obviously the C1000 to save like $700 bucks?...
....
Are you talking about the ball valve and skid plate? You can get that from diana in the description
Ok I actually got most those questions answered somewhere else but I still need the question, what size gallon tank do you have and is it the original tank now on the 2.0
panels with lichen how to remove it?
Thank you for the video guys! On your quick connect you have a quick connect attachment going into a hose where do you get that connector or does it come in that kit?
Question for you. When you clean solar panels with the water Fed brush.Do you let it dry by themselves or do you have something to drive the panels?
Always let them dry themselves
@@socalsolarpanelcleaningcompany now do u just use water to clean panels??? I was told u can’t use any product to clean panels. Thanks for all your help. Really motivated me to start my sole panel journey? U guys ever do ride alongs ? I can learn from my mentors .
@@yoyomomma7536 please watch our videos the question you are asking are in alot of our videos and they will answer alot of your questions.
Very thoughtful of you. New guys need these info.
The deionized tanks you linked are sold out . Will any other brand work as well ?
The one on Amazon may be but try the one on the website
@@socalsolarpanelcleaningcompany the one you linked was sold out , any other one from that website should work ?
@@aureliomandujano5927 yes his is working
@@socalsolarpanelcleaningcompany one last thing , i just bought the tanks . Is there anything they need to be filled with ?
@@aureliomandujano5927 if you bought these from my link on the website they are already filled with resin
Will you let me know the type of pressure washer (brand, model & psi) you have connected to ur viper pump please.
Ar pump 2500 gallons per minute 3 gallons per minute
Honda GX200
Now I think I'm seeing the pump ur talking about but it's not a viper just straight up AR... Did you change pumps from a viper?
@@bryantaybor8403 no we have the viper pump but Mark sells the best
Hi sir it's miguel from Florida what is the model number for the 500 dollar brush 🤔 thank you respectfully miguel from Florida
no model number its a solace brush 23 inch
Zillow.com
So that ar viper pump is only 2700 psi and the honda gx200 is 3200psi , even 500 psi difference they will still be comparable and work?
You can adjust the pressure with the right setup
Thanks for the info Henry! Jenny is super awesome and helped me out with what I needed.
Where did you get that?
Thanks for the info. What about your poles? I haven’t seen those kind of adaptors a the bottom before
Hey brother wondering if your still doing ride alongs?
yes
@@socalsolarpanelcleaningcompany how can we set that up?
How many gallons of water do you think you use in one job of like 30 panels?
Dear Henry did you do any calculation like that, for resin which how much litres water filter per 1 kilogram?
Yes but each city here is different due to hardness in the water .I suggest emailing the manufacturer I'm sure they could answer the question for your area
Do you need to know how solar panel work to get in the business of cleaning them?
You probably should
I notice you guys use the di tanks and I’m curious on what you think of the dual systems to/di
Love the dual di tanks
Great content 👍🏾. I always enjoy your videos and work. Is there a system that uses a pressure washer with pure water (like an RO or DI pressure washing system)?
4) Final but Importantly Last which is that system is going to have leak slowly pushing out water beads as does in the fitting on yours in the (Mark) last segment where your Running the System in the 2.0 Video, which I'm asking cause my process of leveling out floor board and setting up system which if its exuding enough water to see puddles then I'd like to modify my flooring at a small tilt with a modified at the end or sides or something making a troph with a plastic liner to catch the water that after every Job I can then pull out the liner and dispose or recycle however I'd like or Does it not leak (itty bitty to small leaks I hear are inevitable to happen if not right after building and fastening everything on set up the the near future which your video proves it) to even worry about?
Not quite sure what you mean or what you asking about
Hello Henry, I saw a video of you and your partner cleaning solar panels at a couple of customer's homes and you showed a water fed brush-extension pole (red and black) you used when you started your business before getting the more efficient/time saving/bigger/Sola-Tec brush. Could you please provide a link/brand to that product? I am a home and solar panels owner and would like to be able to clean my own panels without spending too much on a professional brush. Great and very informative videos.
No worries in the description contact Jenny @ jracenstien let her know we sent you
@@socalsolarpanelcleaningcompany Thank you very much!!!
Does the deionized water that comes out of filter still go into your tank or do you have it set up to go straight thru to your brush?
Also the DI tanks you have posted to buy, the PPM is 250 with a 550 gallon capacity, does that mean they are only good for 550 gallons? Also are those DI Tanks able to have there resin and filter inside recharged manually by me?
Based on your experience what vehicle would you choose as ideal for your business today?