Hi, could you tell me your heights for comparison i am preety tall and looking for my first bike and i dont want to look like i am sitting on mini bike when riding. Thanks.
Papa yam! After 1.5 yrs of watching your channel and learning so much about motorcycles, I just finished my MSF yesterday and got my endorsement and bike registered this morning! Can’t wait to hit the road on two wheels!
@@andrewfreeman5165 congrats man! Be sure you wear all of your gear please! I just got in my first accident yesterday and only had a helmet and thin gloves and have road rash on 25% of my body. But as soon as as I recover, I’m definitely getting back on two wheels AND with all of my gear! lol It’s a fun hobby that you’ll love! Be safe out there!
My tail tidy for my 660 took 30mins start to finish, once I spread the rear plastics. Looks beautiful. I purchased my RS 660 two weeks ago based on your demo videos. It truly is an amazing bike, and pretty much no one can keep up off the line and leans so nice and smooth. It's GREAT!
Got all my Evotech parts from Motovation for my Aprilia RS660. Those guys are awesome. Even when the weather was bad in Texas back in Feb, they took care of me.
I just got the bike on Friday and could not remember all the goodies you Spite put on there. So I had to rewatch this video. THANK YOU Spite for all your hard work...that I absolutely did not want to do. I appreciate it all!
Evotech tail tidy is the best. Hollow billet aluminum where wires run inside. Competitor tail tidys usually stamped steel with wires hanging out in the breeze.
I want / lust for that bike ❤️ Also @Spite the sodering is nice because you have the security it will never come apart but over time with wiggles it can still break / corrode / lose connection. Have you guys seen some of the milspec connectors and crimps that are available? It's overkill / MotoGP grade in case you guys get bored and want to go down that rabbit hole. Great video 👍🏻
I want the Aprilia660, I can afford it without a too major dent in my finances but I'm a newbie on my second bike with a little over ten thousand Ks experience and the better I get the more it seems to me I will never get close to the limits of my cbr500r (first bike was a rebel) there's footage of guys pulling badass wheelys on them, whipping around liter bikes in corners and fuck I can't even come close to that stuff.. its an odd frustrating feeling.
Torx screws. Bought a ktm and then bought me a set of torx keys to suit. Been spinning spanners for 30 odd years. Never owned a set of these til a euro bike graced my stable. Feel ya on that one spite
Yoooo yammie!! I just picked up my lava red rs660, already put 1k miles on her! If you want to be updated on the reliability, I’ll be putting a stupid amount of miles on her!
@@juliusdrath510 absolutely terrible. Two engines exploded within 4,000 miles. One time a cylinder detonated and then on the new engine it threw a connecting rod and almost killed me. I bought a 636 instead and it’s a much better bike
Hey yammi..I love your videos coz thet are informative... Can you please make video on why ducati pingale v4r or supeeleggera v4 is better on race track when compare to ninja h2r...and ninja h2r is better on straight drag
Lowes sells sockets n wrench individual! Google works in Texas, I belive. I herd god blessed Texas with his own hands! So lowes should be around! Or not. Never mind
For $3,100 there’s no reason for the Yam not to do a ride-and-review on the new 2021 Lifan KPM200. 200cc (I know, I know) 75mph top speed Over 100mpg 6-speed Lifan has been making bikes for 20+ years and are insanely popular in countries like China, England and Russia.
The M6x60 bolts broke through the plastics when mounting the Evotech tail tidy, plus the other bolts where way too long. What were they thinking there?
Hey yammie I startet this year riding with a Kawasaki Ninja 650 and i am asking my self what should i get as my next Bike, a Daytona a rs660 or a street Triple rs What would you say?
don't forget to try putting the swing arm main pivot "flip-chip" in the higher position! have you tried that yet? not sure if it's listed in Aprilia technical publication but, the swingarm pivot bolt can be moved higher (I believe it comes in the low position from the Factory), which should raise the rear of the bike a bit and possibly change rear suspension character too.
The engine cases have the ability but the hole in the rearsets for the swingarm pivot is not eliptical so it wont work like on the RSV4...maybe with a pair of rearsets(which havent been developed yet) you could change the pivot height
@@chrisdunham2911 yes, you are absolutely correct - I went to try it myself and found out that one of the bolts no longer lines up, it would take some machining or another mounting plate to try the "flipped chip"!
Music too loud and unnecessary and you takes far too long to get to the point, we are not interested in your personal life, just show and fit the parts ffs
Thanks to Motovation for the hookup! Be sure to enter to win this RS660 at www.yammienoob.co
Glad you guys could come check it out!
Hi, could you tell me your heights for comparison i am preety tall and looking for my first bike and i dont want to look like i am sitting on mini bike when riding. Thanks.
@@blaz2515 I am 6’0” For me it is a very comfortable bike to ride. Long trips are not an issue.
This turned into a Linus Tech Tips video… and I like that lol
I’m glad I’m not the only one watching both
I’d love for them to collaborate and put a fucking 3090 in a Ducati.
Papa yam! After 1.5 yrs of watching your channel and learning so much about motorcycles, I just finished my MSF yesterday and got my endorsement and bike registered this morning! Can’t wait to hit the road on two wheels!
Congrats!!
@@cai2727 thank you!
Currently beginning my 1.5 year journey! When my freshman year of college begins is when my dad lets me get a bike!
@@andrewfreeman5165 congrats man! Be sure you wear all of your gear please! I just got in my first accident yesterday and only had a helmet and thin gloves and have road rash on 25% of my body. But as soon as as I recover, I’m definitely getting back on two wheels AND with all of my gear! lol It’s a fun hobby that you’ll love! Be safe out there!
My tail tidy for my 660 took 30mins start to finish, once I spread the rear plastics. Looks beautiful. I purchased my RS 660 two weeks ago based on your demo videos. It truly is an amazing bike, and pretty much no one can keep up off the line and leans so nice and smooth. It's GREAT!
Evotech? Or another brand?
@@rtsanderson600 EvoTech
Got all my Evotech parts from Motovation for my Aprilia RS660. Those guys are awesome. Even when the weather was bad in Texas back in Feb, they took care of me.
I wonder if spite still thinks the duke 390 with its 2 different size bots is stupid🤔
I just got the bike on Friday and could not remember all the goodies you Spite put on there. So I had to rewatch this video. THANK YOU Spite for all your hard work...that I absolutely did not want to do. I appreciate it all!
This might be my favorite episode, very funny, and the bike looks great!
Saw an RS 660 yesterday in my neighborhood. Sweet bike.
Having the shop manual for your bike comes in handy when doing stuff like this then you know where all the nuts and bolts are
Only right exhaust option for the 660 is the mivv underbelly one
First mod should be getting a lemon law lawyer, your going to need one!
7:18 LMFAO!!! But "Keep watchin' YAMMIE NOOB" would've been more fitting! :P
Out here with the D2 Solstice Tee 🦾
Yammie, i see a streetfighter on the video ur thoughts on the 848?
You guys need to put sleeker blinkers on that “fender eliminator” instead of the factory ones that still a sore eye even with that tidy.
Evotech tail tidy is the best. Hollow billet aluminum where wires run inside. Competitor tail tidys usually stamped steel with wires hanging out in the breeze.
I want / lust for that bike ❤️ Also @Spite the sodering is nice because you have the security it will never come apart but over time with wiggles it can still break / corrode / lose connection. Have you guys seen some of the milspec connectors and crimps that are available? It's overkill / MotoGP grade in case you guys get bored and want to go down that rabbit hole. Great video 👍🏻
5:46 the background music sounded like welcome to the black parade
Ayyy I didn’t know spite had a second gen speed 3 that’s dope
They should do a Video about it😉
I just can stand spite!! Wish it was only Yammie!
Then don’t watch the video u doofus
@@derekbrown1064 I didn’t
I want the Aprilia660, I can afford it without a too major dent in my finances but I'm a newbie on my second bike with a little over ten thousand Ks experience and the better I get the more it seems to me I will never get close to the limits of my cbr500r (first bike was a rebel) there's footage of guys pulling badass wheelys on them, whipping around liter bikes in corners and fuck I can't even come close to that stuff.. its an odd frustrating feeling.
Im lovin spite's Mazdaspeed 3
Torx screws. Bought a ktm and then bought me a set of torx keys to suit. Been spinning spanners for 30 odd years. Never owned a set of these til a euro bike graced my stable. Feel ya on that one spite
Another great video. Solid team there!
Yoooo yammie!! I just picked up my lava red rs660, already put 1k miles on her! If you want to be updated on the reliability, I’ll be putting a stupid amount of miles on her!
How has the reliability been so far? I just got mine in apex black and put 250miles on it.
Any Updates regarding reliability?
@@juliusdrath510 absolutely terrible. Two engines exploded within 4,000 miles. One time a cylinder detonated and then on the new engine it threw a connecting rod and almost killed me. I bought a 636 instead and it’s a much better bike
Glad I got to see the cowboy Yam.👍
Hey that Triumph in the opening, with the British flag on the tank, that used to be at CTX in San Antonio. I wondered what happened to it.
These are not modifications, they are add-ons. A modification makes a significant difference to the original intention of the machine
If its not a loud af exhaust so we can finally know what it sounds like then its not a must do mod lol
Lmao they will use a leo Vince which will never be loud 🤣
idk why they didnt cop a sc project exhaust that thing sounds like a beast with it
You need some flux there to solder with
Have you fixed that squeaky front brake yet? It makes me laugh though!
Spite with the limited edition destiny t-shirt. Let's goooo
I love Spite more than sweet Papa Yam now😂😂😂
Motivation is great if you have a brand new motorcycle.. they dont have much for a 06 triumph daytona though :/
Hey yammi..I love your videos coz thet are informative...
Can you please make video on why ducati pingale v4r or supeeleggera v4 is better on race track when compare to ninja h2r...and ninja h2r is better on straight drag
is there a video for installing those frame sliders???
I could watch Spite suffer all day long.
im thinking about my first bike finishing classes soon and im thinking rs660 or 2017 Daytona 675R
Evotech makes nice stuff
Yo that Intro music 1:28 had me jammin 😂
Plz review apache rtr 310
Is getting the check engine light fixed a mod.
Lowes sells sockets n wrench individual! Google works in Texas, I belive. I herd god blessed Texas with his own hands! So lowes should be around! Or not. Never mind
Yammi? Would you recommend AF1 shop to grab a Aprilia??
Great work...
For $3,100 there’s no reason for the Yam not to do a ride-and-review on the new 2021 Lifan KPM200.
200cc (I know, I know)
75mph top speed
Over 100mpg
6-speed
Lifan has been making bikes for 20+ years and are insanely popular in countries like China, England and Russia.
1st mod. Replace puke green color.
Agreed. The Lava Red paint/color scheme is MUCH better!
Love you Papa Yamms but Spite is a kick ass narrator
In all seriousness you guys put out awesome informative content and reviews
When are you going to ditch the garbage suspension.
Good ole harbor freight tools
Oh great!! Another vid about an Aprilia! That like no one in the USA will buy..
Not true, My saving account has been renamed to the Aprilia account.
@@godinminaar9024 lol
Y'all should hire this diesel technician to mechanic for you, since obviously you hate doing it yourself
Fuck yea finally popping back up on my notifications
yammie dgaf , love it! lol
The M6x60 bolts broke through the plastics when mounting the Evotech tail tidy, plus the other bolts where way too long. What were they thinking there?
Yammie, how local is local 😂 im in san antonio.. but ill make the drive
Hey yammie I startet this year riding with a Kawasaki Ninja 650 and i am asking my self what should i get as my next Bike, a Daytona a rs660 or a street Triple rs
What would you say?
big fan for india we love you guys
really love the rs 660 but we don't get it in india sorry
SPITE PLAYS DESTINY 2, LETS GOOO, yo Spite hit me up on steam, we can game, I’ll carry u through trials my man
Was that a street triple with a trident light on it???
What's the company called? Because I would like to buy parts with them😂
You should have used a 1/2" socket, instead of going out to buy a whole set.
Song at 11:25 SCHLAAAAAPS!!!
Also whatever happened to jammy jay?
Spite a Destiny player ?
don't forget to try putting the swing arm main pivot "flip-chip" in the higher position! have you tried that yet? not sure if it's listed in Aprilia technical publication but, the swingarm pivot bolt can be moved higher (I believe it comes in the low position from the Factory), which should raise the rear of the bike a bit and possibly change rear suspension character too.
The engine cases have the ability but the hole in the rearsets for the swingarm pivot is not eliptical so it wont work like on the RSV4...maybe with a pair of rearsets(which havent been developed yet) you could change the pivot height
@@chrisdunham2911 yes, you are absolutely correct - I went to try it myself and found out that one of the bolts no longer lines up, it would take some machining or another mounting plate to try the "flipped chip"!
Tail tidys transform these bikes. Why do manufacturers insist on putting these huge protruding bits of plastic on? It ruins the beautiful lines
No
Lmao, I love whiney spite. Seriously though, don't buy fully faired bikes.
Why though?
@@stefanoneil6937 its a joke to each its own lol
spite please stop using the lighter and get a heat gun uwu
I don’t like it with out tell part looks short and ogle, for me 🤔
It does not need mods!
Many of the premium, European bikes offer nicer oem parts
SOLO SEAT COWL.
I can help you solder better
Music too loud and unnecessary and you takes far too long to get to the point, we are not interested in your personal life, just show and fit the parts ffs
That bike needs a different color scheme. The green with those wheels is ugly.
1st papa
I buy everything from Motovationusa
#3
#4
First