We watch your videos no matter what, Jerry. It is you that entertain us, so just have fun with whatever content. Thanks for the demonstration of a recone. Not your first video on this content, but each time us bassheads see a recone video we are reminded of the key steps not to forget.
So Debbie cooks you're dinner AND you're subs, wata gal! Can't go wrong with those Weller soldering guns, have been using them since the 60's! Great video!
Jerry the best video/ build idea for you. is some sdrs in debs vehicle.(or any) Sdrs are (relatively) cheap. Views won’t be a problem, every entry level bass head and future entry level bass head wants a sdr review. That video will end up possibly being most viewed for you. At a small cost.
I seen a post from a guy that used a thermal gun at one of the shows and noticed a lot of builds there running multiple alternators actually only had one working. You could see a huge difference in the thermal signature of a working vs dead alternator.
Recipe cards work better than paper imo, its thickness is more true than paper. But reconning is definitely something that more Bassheads should be learning how to do proper instead of blowing and buying brand new each time.
@@JerryAintloud the homie that taught me straight up told me that he's had recone failure with the paper method. And none of the recipe card aligned build failed and hold true. look up Anthony Vigil from Pueblo Colorado mang he's in his 20s and has us both beat in recone and sub building experience
I use plastic shim stock. Works great and you can be very very exact because there are so many different thicknesses available. Also got a few sets of the jigs they use at the factories then 3d print some on occasion too but usually only do that with shifted motors. Paper is totally fine though.
Just wanna point something out for anyone soldering a subwoofer in the future. I would put something between the leads and the surround because there is a chance that hot solder can roll off onto tye surround and it will melt right through the surround. I just know this from other times I've soldered things
I don't do spl shows but I can tell you from experience you will know when a coil is going out you will smell it first and if it doesn't smell it will rub i always take my hand and put it on the dustcaps if they are hot I will play it lower so it can cool down this is another reason why I have 9 different subwoofers and amplifiers sitting in my garage its depressing when a subwoofer blows are amplifier goes out?Far as alternators it is what it is if you are a daily driver like me and you don't abuse your subwoofers they will last at least 5 to 7 years but in your case maybe a year or two
I wired up 4 8 inch skar svr's too a skar rp.1500 @0.02 ohm lol it worked and played but was a popping through the subwoofers so I checked the ohm load at that point and had to change it too 2 ohm ): i need a bigger amp too. I built a custom box turned too 30hz it sounds really good. More people think i have 2 15s lol
Great job. you should try this glue, alot of bassheads are switching to this.Bob Smith Industries IC-2000 Rubber-Toughened 1oz CA Adhesive Glue. 5 star rated
Had a question from your experience with DC clamp meters to do your alternators put out rated power hot or on average what amperage output do they put out hot at idle say .5-.7v down?
I went to the hardware store and asked them for the grinding/sanding wheel Debbi used with that drill to remove the glue. I even showed them the video. They were no help. Can you tell me what she used?!
Have you ever used Auto Tech alternators? I'm looking to get a new HO Alt to replace my Ebay special alt I'm currently running. I'm asking about Auto Tech because they've got the lowest prices on the market but sometimes lowest isn't the best. So I'd appreciate your opinion or anyone's opinion really. Thanks!
We watch your videos no matter what, Jerry. It is you that entertain us, so just have fun with whatever content. Thanks for the demonstration of a recone. Not your first video on this content, but each time us bassheads see a recone video we are reminded of the key steps not to forget.
Dustin's the goat lmao everytime you say something you need or gotta grab he comes into frame and throws it on the table😂
So Debbie cooks you're dinner AND you're subs, wata gal! Can't go wrong with those Weller soldering guns, have been using them since the 60's! Great video!
Jerry the best video/ build idea for you. is some sdrs in debs vehicle.(or any) Sdrs are (relatively) cheap. Views won’t be a problem, every entry level bass head and future entry level bass head wants a sdr review. That video will end up possibly being most viewed for you. At a small cost.
I seen a post from a guy that used a thermal gun at one of the shows and noticed a lot of builds there running multiple alternators actually only had one working. You could see a huge difference in the thermal signature of a working vs dead alternator.
I love Deb frfr, I wish I could find me a Basshead lady like yours💙
Recipe cards work better than paper imo, its thickness is more true than paper. But reconning is definitely something that more Bassheads should be learning how to do proper instead of blowing and buying brand new each time.
I prefer paper because of how thin it is, I can fine tune it better
@@JerryAintloud the homie that taught me straight up told me that he's had recone failure with the paper method. And none of the recipe card aligned build failed and hold true. look up Anthony Vigil from Pueblo Colorado mang he's in his 20s and has us both beat in recone and sub building experience
Also he won Thumping Pumpkin USACi last fall 169db from a pumpkin and a sub screwed to it from a sub he threw together with only spare parts
I use plastic shim stock. Works great and you can be very very exact because there are so many different thicknesses available.
Also got a few sets of the jigs they use at the factories then 3d print some on occasion too but usually only do that with shifted motors.
Paper is totally fine though.
We have fri night bass night at the welcome to Las Vegas sign.
DEB HAS A VERY NICE WATCH WOOOOO
Loving the video I am gonna have to show you an easier way to prep for drop in ❤
Just wanna point something out for anyone soldering a subwoofer in the future. I would put something between the leads and the surround because there is a chance that hot solder can roll off onto tye surround and it will melt right through the surround. I just know this from other times I've soldered things
Thermal cameras make spotting bad alternators easy
On Dc clamp meters i suggest with peak hold instead of trying to see the highest numbers it holds it
Keep us updated on putting this back in and setting the gains please
Use your ear if you don’t have the funds for the correct tools. You should be able to tell if your gains are set to high or low
Awesome content
I don't do spl shows but I can tell you from experience you will know when a coil is going out you will smell it first and if it doesn't smell it will rub i always take my hand and put it on the dustcaps if they are hot I will play it lower so it can cool down this is another reason why I have 9 different subwoofers and amplifiers sitting in my garage its depressing when a subwoofer blows are amplifier goes out?Far as alternators it is what it is if you are a daily driver like me and you don't abuse your subwoofers they will last at least 5 to 7 years but in your case maybe a year or two
Enjoy your videos Mr Jerry
Glad your getting her truck back together, but from now on Dustin is known as the boogeyman. 😂😂😂 because of his truck.
Boogeyman
I wired up 4 8 inch skar svr's too a skar rp.1500 @0.02 ohm lol it worked and played but was a popping through the subwoofers so I checked the ohm load at that point and had to change it too 2 ohm ): i need a bigger amp too. I built a custom box turned too 30hz it sounds really good. More people think i have 2 15s lol
Great job. you should try this glue, alot of bassheads are switching to this.Bob Smith Industries IC-2000 Rubber-Toughened 1oz CA Adhesive Glue. 5 star rated
I've used that glue before. it worked but I prefer starbond
Nice
Nice work
I can already tell it was a auto tek alt that went out.
You might be surprised
Had a question from your experience with DC clamp meters to do your alternators put out rated power hot or on average what amperage output do they put out hot at idle say .5-.7v down?
It’s all gonna vary,if you’re not pulling a load it’s not gonna show much output, and when hot they’ll drop around 20% of output
I think sam at autotech woulda made it right. Hes always done well to me and everyone i know that has one🤷♂️
👍👍👍...
I went to the hardware store and asked them for the grinding/sanding wheel Debbi used with that drill to remove the glue. I even showed them the video. They were no help. Can you tell me what she used?!
Have you ever used Auto Tech alternators? I'm looking to get a new HO Alt to replace my Ebay special alt I'm currently running. I'm asking about Auto Tech because they've got the lowest prices on the market but sometimes lowest isn't the best. So I'd appreciate your opinion or anyone's opinion really. Thanks!
How much would you charge to recone a 15 inch avatar svl and I already have the recone for it
How do you test an alternator?😊
What type of solder do you use?
Just cheap electrical solder
That sub looks beefy as hell to be honest
When subs blow…what’s chances on amp blowing?
It depends on the amp and how good the protect system is on it
@@codycrabtree3684 Taramps Bass 20k
i've seen it happen, but these DS18 amps protect quick
My taramps amp protected fast when I blow a sub, & came outta protection once I disconnected that blown sub
What synergy subs does Deb run?
WFO 2krms
Why didnt u just cut out the cone right at the dust cap then u got all the space in the world to cut out the spider
What a shame you blew right past the glue down process for both the cone and spider as well as the shim process. That’s the reason I came here.
what ever happend to the DB drive g7's did i miss something all i remember i thought you going to do something the car got traded in or something
when weather cools down a bit they will be getting a enclosure and put in the Rogue
those after market ALTs are soo unreliable