Ty for this video. And Ty for being so kind throughout. For the Thread Jump Trimming on Page 2, you may want to set it to a smaller number. Currently, yours is set to 0.2", which is 5.0mm. Most Digitizers like to set that to about 2mm, which means that your machine will leave alone any jumps (between the same color) that are 2mm or less, but it will trim any jumps that are more than 2mm. Since a 75/11 needle is about 1mm in width, you can even set this number to 1.5mm. So to make it easy on yourself, set your machine to mm just for a minute, then go into the Thread Trimming page and set it to 1.5mm or 2.0mm. Then go back and set your machine to inches again. You can leave the Small Stitches Delete alone since their default won't delete your tie-on's and tie-off's.
Thank you so much for your suggestions. I will definitely give it a try. And thank you for watching my channel. If you haven’t already will you consider subscribing to my channel, I would be so appreciative. Ty😊
Hello Shirley, thank you for your tips. I will be getting my BL Venture 10 needle any day now so you have been most helpful in how to set up my machine.
I’m glad I was able to provide yo with valuable content. If you haven’t subscribed please do, if you have, thank you and tell a friend to watch, subscribe and like. ☺️
“Technology is nothing. What’s important is that you have a faith in people, that they’re basically good and smart, and if you give them tools, they’ll do wonderful things with them.” - Steve Jobs
Great videos! Do you have any more information on how to send designs to the machine wirelessly? Is that only an option via the brother software (which seems expensive!)?
It's not necessarily the software. It's the machine's features and capabilities that matters. Check out your machine manual to see if that's a feature included with your machine. If so, Embrilliance software isn't a very expensive editing program that has that capability function included.
I'm looking forward to my PR1055. I watch all your videos but I have 3 questions that bother me a lot. 1 • I also bought the powerful hoopmaster frames. Could you tell me exactly how to make sure that the needle does not hit the frame. I go through the translator because I am French. 2 • On the hoopmaster site they have a video that says when you have the PR1055 you have to put the large tab on the bottom "On the larger sizes of Mighty Hoops we recommend having the bottom ring tab facing the front and not going towards the back of the embroidery machine”. How do you do I have a 7.25 frame and an 8x13. I don't get the impression that you reverse them in your videos? 2 • For the Jumbo frame, I saw the video where you embroider a woman's head, which is magnificent. You explain that the drawing must be cut in two. Do we have to have PE Design or can only PR do it. I don't have PE Design so I wouldn't buy the Jumbo if I can't use it. I hope you will answer my questions precisely because it would help me a lot. Thanks for your videos.
My part 1 and 2 aren’t titled that way. I have to correct that The tabs should be closest to you and not the back of the machine. Hopefully, that what I did. However, I may have forgotten to do that myself. I now know that’s the process and Ty to do that always.
I alway trace before using any after Market hoop ( Mighty Hoops). All designs needed need to be no less than 2/2 inch away from the edges of all hoops. I use Embrillance software which I had to add the Enthusiast component which allows you to split designs. This software is significantly less expensive than PE Design.
I’m embroidering bath towels and used my table today for the first time.
Ty for this video. And Ty for being so kind throughout. For the Thread Jump Trimming on Page 2, you may want to set it to a smaller number. Currently, yours is set to 0.2", which is 5.0mm. Most Digitizers like to set that to about 2mm, which means that your machine will leave alone any jumps (between the same color) that are 2mm or less, but it will trim any jumps that are more than 2mm. Since a 75/11 needle is about 1mm in width, you can even set this number to 1.5mm. So to make it easy on yourself, set your machine to mm just for a minute, then go into the Thread Trimming page and set it to 1.5mm or 2.0mm. Then go back and set your machine to inches again. You can leave the Small Stitches Delete alone since their default won't delete your tie-on's and tie-off's.
Thank you so much for your suggestions. I will definitely give it a try. And thank you for watching my channel. If you haven’t already will you consider subscribing to my channel, I would be so appreciative.
Ty😊
Excellent video, with lots of useful information, thank you for creating and sharing
Thank you for watching.
Love your channel. Great information. Thank you! It’s going to help me a lot with my new machine
Glad I can be of help😊. I enjoy sharing what I’ve learned.😌
Thank you so much for this video, it was really helpful. I have only had my machine 2 weeks.
Hello Shirley, thank you for your tips. I will be getting my BL Venture 10 needle any day now so you have been most helpful in how to set up my machine.
Thank you for watching and good luck with your new machine. If you haven’t subscribed yet can you kindly do so, I would be so appreciative. Ty
Thank you for the best info on what the pages in machine mean as i was scared to change them before,
I’m glad I was able to provide yo with valuable content. If you haven’t subscribed please do, if you have, thank you and tell a friend to watch, subscribe and like. ☺️
Hello Shirley, you are doing good😀
“Technology is nothing. What’s important is that you have a faith in people, that they’re basically good and smart, and if you give them tools, they’ll do wonderful things with them.” - Steve Jobs
Thank you
Thanl you !!! This is sooo helpful !
I did not find part 1 and part 2. Can you tell me the title to find.
there re 3 parts. Part 1 is not labeled as part 1 though. Sorry
Great video- thank you
Glad you enjoyed it
Thank you😘
Thank you for watching
Great videos! Do you have any more information on how to send designs to the machine wirelessly? Is that only an option via the brother software (which seems expensive!)?
It's not necessarily the software. It's the machine's features and capabilities that matters. Check out your machine manual to see if that's a feature included with your machine. If so, Embrilliance software isn't a very expensive editing program that has that capability function included.
I'm looking forward to my PR1055. I watch all your videos but I have 3 questions that bother me a lot.
1 • I also bought the powerful hoopmaster frames. Could you tell me exactly how to make sure that the needle does not hit the frame. I go through the translator because I am French.
2 • On the hoopmaster site they have a video that says when you have the PR1055 you have to put the large tab on the bottom "On the larger sizes of Mighty Hoops we recommend having the bottom ring tab facing the front and not going towards the back of the embroidery machine”. How do you do I have a 7.25 frame and an 8x13. I don't get the impression that you reverse them in your videos?
2 • For the Jumbo frame, I saw the video where you embroider a woman's head, which is magnificent. You explain that the drawing must be cut in two. Do we have to have PE Design or can only PR do it. I don't have PE Design so I wouldn't buy the Jumbo if I can't use it. I hope you will answer my questions precisely because it would help me a lot. Thanks for your videos.
My part 1 and 2 aren’t titled that way. I have to correct that
The tabs should be closest to you and not the back of the machine. Hopefully, that what I did. However, I may have forgotten to do that myself. I now know that’s the process and Ty to do that always.
I alway trace before using any after Market hoop ( Mighty Hoops). All designs needed need to be no less than 2/2 inch away from the edges of all hoops.
I use Embrillance software which I had to add the Enthusiast component which allows you to split designs. This software is significantly less expensive than PE Design.
I can’t seem to find part 1 and part 2?
Which video contains changing the Home Screen photos? I’ve tried adding mine in small jpeg form and the machine says it can’t use the file
Interesting. I'll check and see if I can suggest a solution.