you are so right that that there is NOT any good videos of setting up your new Brothers machine. i purchased m9ne last year April 2020. i did a couple of projects, but now my dilemma is how to transfer new projects to my machine. do you have a video available for help? thanks again
Hello Ruby! I do not have a video yet but you let me know what kind of videos you would love to see and I will get right on it! Thanks for the 1st suggestion - I will add it to my list and make a quick video.
Hello Erin, I think you are asking about needle threading. So this machine does do automatic threading. You have to push a button to drop the auto threading mechanism down. Then feed the thread around it and then hit the same button again for it to be auto threaded. Super easy process. I think the hardest part is getting the thread through the final slot right above the needle. Definitely a tweezer and patience job. I try to not do that portion at the end of day to avoid frustration. Thank you for you comment! Nicole
Hi! I m picking up my babylock 10 needle today! So excited. Thanks for the video. My table wont be here until july so i hv to set it on a flat table first . Hope i dont hv to lock it all up when i move it to its own table!
What did you use the sample embroidery for? I would have cut a pocket for a polo shirt. This would be awesome to show off when you make the first design shirt.
So to check tension and make sure you machine is working properly, you stitch out that design. It is what your technician will stitch out to make sure everything is good when the machine is serviced. Your pocket idea is such a good idea! I need to figure out how to do that - right away!
@@nicolebiancodesigns7793 Thanks for the reply. Simply cut a pocket and then do test embroidery on it, if you like it sew it onto a polo shirt as a pocket.
Such a good question! 8" by 14" is the largest flat size that comes with the machine. Hats are standard 2.5" x 5" front design. I am going to make a video about this so I can show people the size potentials and items you can get to help you.
what's the price for this machine.. looking around and can't get a price, I've seen 2 or three prices, but it was up there in price , where I'm not believing it's the right price.
Ray, Prices for this machine vary a lot based on your location. My suggestion always when looking for any embroidery machine is contact several dealers and get their current price/offer deals. Some may be a better price or come with more add ons but be just a little more of a drive. Also depending on which dealer you get it from they may have incentives like 1st tune up is free. I have seen prices vary over thousands of dollars. It just depends. I hope this helps! Good luck!
Ich bin eine Mütter in einfach ich wirklich brauche ich etwas günstiger wenn müglikeit gibt's Gott soll segnen eüre Erfolg und meine gluk schtet in ihre Hände ich von Herz ich bedanke mich wenn klappt @@nicolebiancodesigns7793
Hello Patty - Cost on Brother machines vary a lot depending on where you live. Your best bet would be to contact your local dealers and see where they fall on cost. For new multi-needle machines, cost ranges from $10k to 15k depending on features. Hope that helps! Nicole
Ich verstehe nicht englisch, aber ich bin verliebt am disse maschine bei euch habe ich große bitte wenn mir unterschtuzen kann ,soll ich haben wifil kostet ein ungefähr
Bonjour. Pour le moment mes vidéos sont uniquement en anglais. Mon français n'est pas très bon. J'essaierai d'avoir une traduction en français à l'avenir.
Thank you!
you are so right that that there is NOT any good videos of setting up your new Brothers machine.
i purchased m9ne last year April 2020. i did a couple of projects, but now my dilemma is how to transfer new projects to my machine. do you have a video available for help? thanks again
Hello Ruby! I do not have a video yet but you let me know what kind of videos you would love to see and I will get right on it! Thanks for the 1st suggestion - I will add it to my list and make a quick video.
How is the thread getting on needle threaded. Your hand is in view when you hit button second time.
Hello Erin,
I think you are asking about needle threading. So this machine does do automatic threading. You have to push a button to drop the auto threading mechanism down. Then feed the thread around it and then hit the same button again for it to be auto threaded. Super easy process. I think the hardest part is getting the thread through the final slot right above the needle. Definitely a tweezer and patience job. I try to not do that portion at the end of day to avoid frustration.
Thank you for you comment!
Nicole
Good camera angles.
Thank you!
Great video! Thanks for sharing!
Thank you so much for watching! I appreciate your kind words.
Hi! I m picking up my babylock 10 needle today! So excited. Thanks for the video. My table wont be here until july so i hv to set it on a flat table first . Hope i dont hv to lock it all up when i move it to its own table!
Thank you for your video dear. Is this a commercial embroidery machine?
No problem! So it is kind of in-between. It is marketed for those who do a bunch of embroidery projects and might want to have an embroidery business.
@@nicolebiancodesigns7793 Thank you for your quick response.
What did you use the sample embroidery for? I would have cut a pocket for a polo shirt. This would be awesome to show off when you make the first design shirt.
So to check tension and make sure you machine is working properly, you stitch out that design. It is what your technician will stitch out to make sure everything is good when the machine is serviced. Your pocket idea is such a good idea! I need to figure out how to do that - right away!
@@nicolebiancodesigns7793 Thanks for the reply. Simply cut a pocket and then do test embroidery on it, if you like it sew it onto a polo shirt as a pocket.
@@davidmacleod5690 Such a fun idea and a great way to keep the scrap pile down.
What is the largest area you can embroider on this machine? I have the Personna PRS100 and thinking about upgrading to this model.
Such a good question! 8" by 14" is the largest flat size that comes with the machine. Hats are standard 2.5" x 5" front design. I am going to make a video about this so I can show people the size potentials and items you can get to help you.
@@nicolebiancodesigns7793 i thought there was a 14 x 14 hoop now?
@@wadewells9214 Unfortunately no. You can unhoop and keep your project going (118"x 118") but you only can embroider 14"x8" at a time.
@@wadewells9214 there is a 14 x14 hoop you can buy for split designs.
what's the price for this machine.. looking around and can't get a price, I've seen 2 or three prices, but it was up there in price , where I'm not believing it's the right price.
Ray,
Prices for this machine vary a lot based on your location. My suggestion always when looking for any embroidery machine is contact several dealers and get their current price/offer deals. Some may be a better price or come with more add ons but be just a little more of a drive. Also depending on which dealer you get it from they may have incentives like 1st tune up is free. I have seen prices vary over thousands of dollars. It just depends. I hope this helps! Good luck!
Ich bin eine Mütter in einfach ich wirklich brauche ich etwas günstiger wenn müglikeit gibt's Gott soll segnen eüre Erfolg und meine gluk schtet in ihre Hände ich von Herz ich bedanke mich wenn klappt @@nicolebiancodesigns7793
How much was your machine?
Hello Patty - Cost on Brother machines vary a lot depending on where you live. Your best bet would be to contact your local dealers and see where they fall on cost. For new multi-needle machines, cost ranges from $10k to 15k depending on features. Hope that helps!
Nicole
Ich verstehe nicht englisch, aber ich bin verliebt am disse maschine bei euch habe ich große bitte wenn mir unterschtuzen kann ,soll ich haben wifil kostet ein ungefähr
Thank you for watching my video! The machine is pretty great and there are tons of different machine manufacturers around the world.
Bonjour est il possible d’avoir l’explication en français s’il vous plaît . Merci
Bonjour. Pour le moment mes vidéos sont uniquement en anglais. Mon français n'est pas très bon. J'essaierai d'avoir une traduction en français à l'avenir.