TURBO ROTARY MINIBIKE First Drive! | Ep. 4
HTML-код
- Опубликовано: 5 окт 2024
- RHB31 VZ21 Turbo - Amazon Affiliate link: amzn.to/3mMWAAu
If you would like to get a turbo of your own as well as helping our channel, use the link above!
This is episode 4 of the Turbo Rotary Minibike, where we took it out for the first test drive with the turbo! We changed the gearing to give it more torque but went a little too high, so we need to re-regear it. It sounds absolutely insane when driving and it seemed to be doing well and making boost! Next up is going full send and getting up to some higher speeds to see what it’s capable of!
Thank y’all for watching, stay safe, and be sure to stay tuned for the next episode, the FIRST DRIVE!
-----------MERCH------------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/...
--------------TOOLS------------
RogueFab Tubing Notcher
www.roguefab.c...
Pro-tools Tubing Bender
pro-tools.com/...
Optrel Crystal 2.0 Welding Mask
usa.optrel.com...
Optrel Grinding Mask
usa.optrel.com...
---------MUSIC --------
Music - Background and Montage Music Is From Endemic Sounds
www.epidemicso...
Intro Song - Jimmi by Andrew Applepie
• Andrew Applepie - Jimmi
-----PARTS-----
RHB31 VZ21 Turbo - Amazon Affiliate link: amzn.to/3mMWAAu
Pulse Pump- www.gopowerspo...
Seat - www.gopowerspo...
Chrome Shocks - www.gopowerspo...
Chrome Wheel - www.gopowerspo...
Inner Tubes- www.gopowerspo...
Tires - www.gopowerspo...
Gold Chain - www.gopowerspo...
Fenders - www.gopowerspo...
¾ Lock Collar - www.gopowerspo...
Brake Band- www.gopowerspo...
Brake Band Pin- www.gopowerspo...
Brake Cable and Lever- www.gopowerspo...
Jack Shaft Sprockets - www.gopowerspo...
Jack Shaft Lock Collars- www.gopowerspo...
Jack Shaft (10 inch with lock nuts and key) - www.gopowerspo...
Grips and Throttle - www.gopowerspo...
Clutch - www.gopowerspo...
RLV Muffler - www.gopowerspo...
Weld On Tabs - Amazon affiliate link: amzn.to/2XOoIIv
That thing is sick! I wonder if a juggernaut would fit up 🤔
Better yet, another turbo
Vasily you need to stop watching yt and finish the damn mower cmon man where is it at?
Lol
Two of my fav powersports fabricators
No vastly builds can can watch yt like all us
Get a torque converter with medium/high gearing to fix that low rpm flat spot, and to give higher top speed, you could run premix, probably only 50/1 if you’re on pump gas right now. The premix will stop it from blowing up if you’re really worried about that, and of course porting the tiny intake it has would give a lot more power but I understand you don’t have a lot of time on your hands to fabricate something like that. But you could always Dremel out a little bit of material, and a rough intake surface helps mix the gas with the air better, cleaner burn, more power, bla bla bla
ruclips.net/video/C0bw14RAXrU/видео.html
That thing would be crazy, with an extra gear or two.
It would be possible to to do rather b welding build his own so it should fit tho this one too.
Or 5
Back in 1963 I had a minibike with 8" wheels and a Scott-Atwater 15 c.i. Outboard engine on it with a water tank up front and it thermo-syphened to cool like a Model T auto. Anyway, I am writing because of your mention of 'wheelieing'. Don't know if that's a word or not. What happened is that the first time that I went around a corner & 'gassed' it, the wheel came up while it was laid over. A real heart stopping moment, I'll say! Got straightened up and rolled off the throttle. I watched out and never did that again. BTW, that engine was from a class "C" race kart. Fun tho', since I survived.
you need to resize the intake ports to be round thats the air restriction that is causing the problems
ruclips.net/video/hbaGwxAhuCU/видео.html
Y’all shop truck is really cool
You Rock Adam
@@samsgarage1716 thanks Sam right back at ya bud
ruclips.net/video/hbaGwxAhuCU/видео.html
1967 ish? Made tough.
I wish y'all would've installed a boost gauge. That would've been really cool to see how much boost it's making. That Sachs single rotor is a beast with that small turbo on it.
Heck ya been waiting to see this cool lil bike to rip great job fellas
6:56 that echo is like a sci fi bomber scene.
Maybe this question have been asked millions times before but I wonder where your intro song comes from.
I really like it and didn't found it elsewhere.
I can't wait to see your next videos!
Thank you guys for sharing your passion 😊
Nice to see it ripping 👍
Thanks for posting guys!
Thanks Mike! appreciate it!
That turbo sounds so cool man awesome build
Daniel is looking more and more like "Danielle." You're KILLING US, dude! (love the bike, though!) LOL
ruclips.net/video/C0bw14RAXrU/видео.html
Exactly headbands went out in the 60's and even then only girls wore them. Guess college has taught him to be gender neutral.
@@Hoggdoc1946 rock and roll people wore them shits in the '80s.
That thing sound like a 2 rotor! Amazing!!
Good work guys👍🏻 Love that the guy injured guy was the test pilot 🤣🤘🏻
It would be cool to have a sequential clutch setup in that thing.
ruclips.net/video/hbaGwxAhuCU/видео.html
@@Hitycooking Why did you post this video. It showed nothing about the topic.
Very nice bike, sounds great! Good progression in the build also. I dont like the clutch band-break tho, those are scary with that much power. I am shure you could make a sprocket brake with some sort of mc calipers.
Adjust the pilot jet. Its the small screw under the carb nearest the intake side of the carb. Will help the low speed running
Definitely need some higher rpm clutching, rotaries don’t make any power low rpm wise so if you could toss an adjustable clutch or a tq converter on it you’d be set for the track. Then dial in the gearing for top end and it would absolutely scream. Definitely check the plugs to see what your mix looks like and then you can play with jet sizes/ 2 stroke mix ratios to really bring it to life. Absolutely wonderful work guys, keep it up 👍🏼
What’s not to like? Good clean fun. Awesome!
A gold chain? Your mini bike is flexing.
Love that 68, Chevy!
I like his comment, "It does wheelies and I kinda don't like that."
Tip: During the 1979 IMSA racing season, Mazda ran it's RX-7 entry with fuel injection... which helped improve it's mid-range throttle response & power.
Looks sick, would love to see a boost gauge to see how much boost its making.
Cool build. If you guys want, or when you can, you guys should port match the intake for better flow
Great job guys, but b careful with that break setup if u break a chain how will you stop it ,that's scary.
This is so sick! I had no idea they made rotary engines this small lol
Thanks for sharing your friend Rob from Canada ✌
Crazy cool thanks for sharing your build a friend from Canada Rob ✌
i really think it needs a torque converter even stock no turbo
ya I think so too when they don't have a gearbox
@@delta2904 with the rpm been so high it just revs out to fast with out one
@@1981dasimpson yaa
ruclips.net/video/hbaGwxAhuCU/видео.html
@@Hitycooking are you taking the piss advertising your own page on some one elses comments
Loving the rotary bike.
Coming from a man with a modded 2006 6port 6speed Rx8.
Very nice guys. It turned out excellent so far. I think with the right gearing and a stronger clutch , this thing would be a terror! 🙌🏻
This turbo rotary minibike is so cool!😎🏍️🏍️
Was this filmed outside of a Blue Man Group concert?
Lol
This needs a 2 speed trans put on it, I love the build so far!
Wow it’s got some pep in it’s step now
Put a shifter cart transmission on it
It got that brap brap
You boys have done a great job on that mini! Very impressed. Now, where would a guy find a Sachs rotary like that?
now its anti-lag time!
Your making me remember snowmobiling with a boot cast on.
2.30 I hear a Drumline Baby!!!!
Sound's Awesome man! Nice work👍
Shouldn't it be smoking a little bit
more even with boost?
ruclips.net/video/C0bw14RAXrU/видео.html
The tank looks inadequate and if it doesent breath properly it could starve it for fuel. Needs bigger tank and better air/fuel
@@jeeperzcreeperzz ya I agree needs a bigger tank
If you took that motor apart and did some porting and open up that intake it would help a lot with throttle response but also you have a very long intake so of course the throttle is gonna be really laggy
MY TURN!!!!!!!! MY TURN!!!!!!
You guys should put rounder tires on it so that it can lean over a little better.
this thing goes!
Looking forward to seeing that thing rip great vid guys!!!
you haven't hit redline quite yet, sounded about 5-6k when the guy with the boot was riding.
It sounds good.
Sounds like it has way more in it with different gears. Im eager to see what you guys can do with the gearing to change speed!
Top speed run
Like to see this against BoostedBoiz turbo shopping cart
Oh shit that's the ticket boosted bois and build break repeat winning combo
That thing Sounds grEat ..it needs to be on the street dont be scared! 👍
Dope! But you guys need a better testing location. We need more shots of it
Maybe a squirt of nos to top it off. Good job guys.
I think i used to work with the tall dude riding the bike. at s&k moving furniture I was a mower tech
Howly i forgot this guy restoring cj7 just realize this is the same channel
get a RPM counter on it sounds like you are letting off just as it's about to sing
A boost guage would help also! And they NEVER pulled the plug to see how it was burning...
This is awesome... air up those tires!
Great build, would make a perfect pit-bike for a rotary drifter ;-)
Try it without the muffler it seems like it may be restricted too much. Great build
Damn I want one of these now
Can you provide me a source of where you get the Rotory engine ? I want to start messing around with a Rotory and start learning
Noice! I just put a 212 cc in a mini bike similar to urs and it does willys when I do full throttle 😂
boost guage and a tacho would help
Where is ur intercooler?
How about putting the turbo on the rotary go cart?
I think its time to take this to next level and get fuel injection system and programmable ecu to optimize power.. also maybe get bit better turbo than that thing so there is not chance of engine failing due turbo braking.
That sound ❤️❤️❤️❤️
someone needs to make a shopping cart kart the boosted boiz made one but it wasn’t really in depth lol
Pretty Cool. You guys wanna race it ?
Looks really fast.
You guys should be running premix
I'm pretty sure they are, otherwise they would have already blown the engine, because they have been testing it out quite a bit.
you could put that rotary in a dirtbike frame that would be sick
I wonder if you can brake boost it
I love his hair he looks like a big poodle 🐕
Thanks for the video
That did it! I'm Subscribed!
Y'all are nuts, that's all i can say...
Where do you find such a small rotary? Do they make larger displacement singles?
Oh yeah you can tell it’s way faster than before.
I still think your exhaust is to small diameter and your loosing out on some hp. My buddies twin turbo RX7 is now rocking 3.5inch exhaust and it came alive compared to the 2inch that was on it before.
jo guys in ur carburetor should be 3 jets low rpm mid rpm and high rpm
This gives me hope for my turbo bike build!! So tell us now, is that a streetported or bridgeported rotary? 😉
Missing:College student,answers to Jason;Last seen heading west at @50mph yelling "The throttle's stuuuucck....".
get like a 2 speed auto setup like some of the cars and cameras bikes
I dig it! But did you consider a mini roots blower, instead?
If you like rotarys check out the Wankelghini. Supercharged Rotary Lamborghini
Sweet I will check it out
Joe and I look like we can be twins
Yes I want one please! That’s so awesome. I just love Doritos (rotaries) and when they are turbocharged it as all the more better. That thing is so fast too. How many cc’s is it again? Might have to motor swap my Honda ruckus
These are 160cc engines.
lmao good luck fitting that
@@generality9559 bigger hammer and welder it’d fit lmao. But I’d like to keep it 49cc just because the laws were I live it has so many gray areas that make it fun
Power jet carb and 1inch clutch it will ramp the power jermey williams is a nice outboard
Send it to varus who built hurts rx7s rotory and see if he can port it
I say put a way bigger exhaust on it. Just to eliminate backpressure completely
Yeah I agree the turbo already adds back pressure to the exhaust it needs a little bit bigger exhaust
Next mission is porting intake and outtake
Whats the redline on that engine? It sounds like you're just barely starting to hit the power band. Rotaries don't come alive until high RPMs.
This km 48 that they are running has a stock redline at 6000 rpm
Where can I buy a minibike like that one with a rotary engine? Or where can I buy a rotary engine like that one?
You need a rpm gage would help