2007-2011 GMC YUKON, CHEVY TAHOE, SUBURBAN no oil pressure fix.

Replacing the oil pressure sensor worked for my situation, it is definitely recommended to check your oil pressure by gauge to verify any low oil pressure situation. Thanks for watching... um.

[@kevintinaodman4943]

The same thing happened to me about a 2013 avalanche test drive was awesome started driving home lost oil pressure but as soon as I would shut it off and turn it back on oil pressure came back which made me wonder if it was the gauge because I had no motor noise whatsoever so when I got home I tore into it replace the oil pump pickup tube and oil sending unit and screen never cured my problem so I knew that there was something else wrong so today I hooked up an external oil pressure gauge wow was I surprised cold start I had 80 lb of oil pressure when it warmed up I had 59 lb of oil pressure and I did put the high volume oil pump in with the high-volume tension spring now I think I got too much oil pressure but before I change the spring I need to know why that differs from the gauge inside my car so if any of you are having this problem hook up an external oil pressure gauge before you do any work to it..

[@diegogiancarlogm5302]

Could you please tell me the solution to this issue? I have the same problem

[@geraldross9430]

My Tahoe does that every time its time for an oil change! Fresh oil and pressure comes up on gauge.

[@isaiahreeves4069]

Same thang happened to me, just bought a 07 subburban and bam low oil pressure.

[@futurefunk88eddins96]

08 avalanche for me

[@jacobmcbee6368]

2010 Tahoe brought me here😂

[@KeilanJones-eg4ed]

2011 Silverado

[@veronicaalcaraz502]

Man 2008 Tahoe smh

[@danielsanchez2846]

2011 GMC Yukon Denali😢

[@edgarguerror19]

Hello, where did u got that tiny filter screen u showed in your video???
Its great video, thanks.

[@nissmopwer]

It'll either come with a new one when you buy a new sensor or you can just clean off the old one if you don't destroy it.

[@MultiSwc13]

Good video bud 👍

[@AlexGarcia-kf6cz]

I changed that out on my 2008 chevy silverado 5.3 but it didn't fix the problem. Next step is to replace the o-rings.

[@KB-id8ym]

2017 yukon same problem.

[@AriesRox2012]

5:03 startup

[@marvinbowers6797]

What type often pressures switch

[@jonathanmolina7105]

Just bought a 2008 Yukon with 6.2 same thing every time I come to a stop sign

[@ninetyseven7656]

Thanks

[@FelNoobs]

Does it need to be reprogrammed or just replaced?

[@nissmopwer]

Replaced no program needed

[@rush4ever1]

6.2? Same prob in a 6.2 2008

[@nissmopwer]

Most likely oil sending units on these years are prone to going out

[@Tonysoprano1999]

It's 4.8 right?

[@nissmopwer]

5.3 sending units are all the same tho, they go bad often

[@Tonysoprano1999]

@@nissmopwer It's 4 gears and it's 2011, how come?

[@dillonwhite3103]

11 Yukon Denali doing same thing