What Wheel Fits on a HZ Kingswood? 275/60r15 - 295/50r15 - 325/50r15 Tubbed and Untubbed
HTML-код
- Опубликовано: 11 сен 2024
- Just a quick look at wheel and tyre fitment and the clearances of an untubbed and tubbed HZ Holden. This also Applies to HQ HJ HX and HZ.
Mini tubbed and notched rails.
275/60r15
295/50r15
325/50r15
Great content has helped me a lot as I am going to tub my HX myself and notch the rails and fit mini tubs
Awesome mate!
Great video chief !!
Really good demonstration
Great vid mate, you may also need to look into elongating the wheel arch to allow for that nitto to expand in height when doing a skid.
Might be something I’ll need to think about later down the track, I’m pretty confident I won’t though.
Very informative mate! 👌
That’s the idea boss!
Killa vid, very helpful thanks mate!👌🏼
I must’ve watch this about six or seven times already are really good and informative I plan on doing a 295 tub myself I’m bit of a hobbyist welder, Do you have any Sill replacement videos plan for the future because not too many people of done that as yet for HQ WB That are any good anyway
Funny you say that, I actually have some sills I plan on doing this week, but I have some videos scheduled ahead of when that one will be up so you’ll have to keep an eye on the channel.
New videos go up on Friday night every week.
Great video 💯❤
Awesome content! I have a coupe that is mini Tubbed to the rail and the rails straightened. I’m running a 26x12x15 on a 10inch rim. Perfect size for my combo.
I also know of a car running a 295/50 on a 8.5 inch rim that fits very much similar.
Would love to see how the rails are straightened @kegginbeer6430….
Nice explanation, not that I'm doing it myself.
I'm contemplating rolling a guard. Was hoping you had a bit of a demo in that one.
Anyways, am sure there's a few vids out there.😆.
Sorry mate the best I can do as close as guard rolling is a time lapse of me and my partner hammering over a guard edge in an upcoming video.
hi , the best idea would it not be to cut 100% rail out and shift it inwards and blend with steel work at either end ???
I assume your going to run coil overs which repositions them [spring and shock ] vs the stock setup .
Shortened diff housing also ?? [to allow for wheel position and offset ]
Also I suspect adjustable length bottom arms to shift the diff F/R and adjustable uppers to correct pinion angle .
Going over 255 tyre sure gets complicated !!!!!
I wouldn’t be the first and certainly not the last to cut the rail how I have done. Many don’t do the reinforcements I have done either which I will be showing in later videos.
Suspension at this stage will still be springs/shocks. I may look into fitting coil overs later on.
Adjustable control arms and shortened 9” are a must.
Hi Mate, love you vids…..whats your experience with this set up……HQ tubbed to the rail only and 15×10, offset 0, 4.5” back space 275x50 tyre…..cars about to be tubbed to rail but doing my head in with rim size before purchasing them.
Hey mate from my understanding you weren't alowed to modify the chassis rails well in Victoria that is. You can replace with modified rails to the same size or better. What's your knowledge about it?
Not sure, I’m not Victorian. But I know plenty of Victorian cars with notched rails.
Slowly catching up on your vids, thanks for sharing. With the tape and getting it straight, maybe a laser level could be used in future if you have one.
Laser level is a bit too flash for me mate, but yes that would be nice!
@@TheRestoShed yeah after I wrote it I thought wth was I thinking. Who has a laser level when restoring cars. That's why my 50th anniversary is still on a rotisserie and not on the ground and why I have a laser level because I'm doing house renos haha.
What size is the rim and back space for the 295 tyre set up
15x10 3.5” backspace
@@TheRestoShedHi Mate, love you vids…..what your experience tell you with this set up……HQ tubbed to the rail only and 15×10, offset 0, 4.5” back space 275x50 tyre…..cars about to be tubbed to rail but doing my head in with rim size before purchasing them.
@jf1850 you’ll need to notch your rail with a 10” rim. 275/60 you might need to clearance your dogleg depending on ride height too.
So I haven't tubbed mine at all do you think I can fit 10inch wide 265/50/15 on a He kingswood style side ute.
What width rim are the 325’s on ?
That white hq wagon what year is it?
Iooks exactly like my old one same wheels too.
It’s a later model wagon with a HQ front
@@TheRestoShed ahhhhh I almost cried lol
What offset are these rims please cheers
4.5” on the convo pro and 3.5” on the Autodrag
What size is the last tire
325/50r15
@@TheRestoShed looks awesome
Will a 265/50/15 fit untubbed unrolled?
255/60r15 fits better with the correct offset wheel.
Great video mate 👌🏻
Thanks champion 🙏🏼