Pop & Lock Toyota Tacoma tailgate remote lock/unlock installation

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии •

  • @CAndrade125
    @CAndrade125 2 года назад +1

    Thank you! All these other videos had me thinking i was missing a part.

  • @adrenalinefilmspr
    @adrenalinefilmspr Год назад +1

    Great video. Thank you, for demonstrating how to install this without the additional plug and play adapter. My kit didn’t come with it and had to do your method.

  • @khernanj1793
    @khernanj1793 Год назад +2

    Man THANK YOU!!!
    You saved me a lot of frustrating and my wife thinks I am a pro 😂. I appreciate it

  • @KungFuM0nk3y
    @KungFuM0nk3y Год назад +1

    Awesome! You helped me, because the video from Pop & Lock has that plug in a different location. They must have changed it after 2021, or on higher level trims maybe? Mine is a TRD-Off Road that has LED light package and Advanced Technology package as well. I'm sure that adds wires and might change where things are a little.

  • @resolve638
    @resolve638 4 месяца назад +1

    I didn't get the tacoma's wire tap white plugs female and male accident had seen it was not turned correctly and stuck so you cut it off,? was it your error or the plug error? Could u prevent the issue ? or reset the wires the way in the video to fix the full issue? Next question possibly use the handle with a key to door unlock and lock to the tailgate handle or does it only work with FOB key unlock and lock? thanks,

    • @mytacomajourney5915
      @mytacomajourney5915  4 месяца назад

      @resolve638 the plug was my fault. The tailgate still works with the key or you can use the key remote.

  • @kalpatel8537
    @kalpatel8537 Год назад +1

    really good video compared to the others out there. Thank you sir!

  • @MrBEli-dw4rl
    @MrBEli-dw4rl 2 года назад +2

    Awesome video bro... Definitely learning from your mistake because that would be me doing it first time on my own, lol. Thank you...

  • @m_grace7633
    @m_grace7633 2 года назад +1

    Great video ... way better than others

  • @Orod_
    @Orod_ Год назад +1

    Do you happen to know the e size of the fuses in the fuse harness by any chance ? Mine are 5amp and they keep getting blown.

    • @mytacomajourney5915
      @mytacomajourney5915  Год назад +1

      I checked my Pop N Lock harness on my truck and it has 2 5amp fuses. If they are blowing something is connected incorrectly or something is shorting out. I would double check the wiring at the trucks kick panel wiring. The wiring at the kick panel is the only place that you actually had to connect into the truck. Also make sure the Pop N Lock harness did not get damaged or cut somewhere.

    • @Orod_
      @Orod_ Год назад +1

      @@mytacomajourney5915 ok I’ll check the wiring. Thankyou for checking !!

  • @benvillegas86
    @benvillegas86 Год назад +1

    Great video, definitely very helpful, thanks!

  • @DutchCleveland
    @DutchCleveland Год назад +1

    you did a better install video than the pop and lock people. You showed the grommet. They didnt.

  • @ajeno-f2n
    @ajeno-f2n Год назад

    popo y tres generaciones cananea