Any cheap grease gun will save you plenty of time and money. Just have to remember to grease the fitting on your car or trucks. That is one of the biggest reasons they get dry and crack over time.
My go-to is the Pittsburgh Pro 1/2" flexhead extended ratchet and metric impact socket set, 10mm to 32mm sizes. Unfortunately I was disappointed with that creeper, it's "compatible" is 10 time's better.
A few Amazon items.. 1) Top Side Creeper JR is $28. It is great for leaning on vs. the plastic parts of the car when working topside. It helps you back a lot. 2) A set of Hose Spring Clamp Pliers. If your car has any of the spring clamps, the tool that fits them will save you a bunch of time. 3) Magnetic rechargeable work lights. 4) Magnetic spark plug socket [With extension if needed]. 5) (from eBay) I got two 5 gal plastic jugs for old oil and coolant. Most auto parts stores take used oil, but used coolant is harder. In my area, Advanced Auto parts has a location that will. These jugs have nice handles and lids for transport.
Well - not from Harbor Freight but last year I picked up a MILWAUKEE M18 FUEL 3/8 in. Mid-Torque Impact Wrench with 600ft lbs of torque. It is a game changer. I bought the 3/8 version ($230 from Home Depot with the battery and charger) as I work on smaller cars - not trucks - and the physical size fits into more places where I need it like the under carriage on my SuperCharged Mini Cooper. I told my wife after my first time using it “I could have been an actual mechanic if this impact wrench came into my life earlier.” I went with a Milwaukee battery operated impact because I didn’t want to give up the floor space needed for a compressor for air driven impact. Plus the loud compressor would have upset the Audi/Porsche/Tesla houses in my neighborhood. The guys already don’t “love me” because I can fix my own $hit. It threatens their manhood when a project car arrives on a flatbed and week later I am driving it after repairs. Their wives like me…
Yes. Me too. I went to the local appliance warehouse years ago and loaded up the pickup with as much refrigerator cardboard boxes as I could fit. It now lays above the rafter of my garage to keep the heat down. There’s extra up there and when I need a new piece I reach up and grab one. I can roll around on cardboard without wheels getting caught on little rocks or have the wheel of the creeper turned one way when I want to go another. I tried one once and got pissed. I kicked it out from under the truck and never used it again
I went in to Harbor Freight to get some files to sharpen my chainsaw, left with a whole chainsaw sharpener, files were 15 and the sharpener was 30 so it was a no brainer for me. I don’t understand how they’re able to make it that cheap. Still works sharpened my chainsaw quicker and more times than a filer can.
As a mechanic I must say this is a great list. I used that tool cart for 4 years in a 4x4 shop and it was an awesome tool cart. It had all my normal daily tools that I always used in it but had a separate big box for the specialty tools which was the 72" with US general. I don't have a creeper but after this i'll probably have to grab one. Those Daytona Jacks definitely look way better built and I'd get a set if I didn't already have jack stands. Also I recommend the 12 ton stands for anyone with a lifted truck. They are tall enough to get most trucks on the frame rails and droop out the suspension. Also that Daytona floor jack is an impressive jack for sure. I've used them and work awesome. They stole the idea from SnapOn and copied it. Pretty sure they even went to court because of it so if you want a SnapOn jack without the SnapOn price that's the way to go. When my low pro HF jack gives up the ghost i'll be getting a Daytona.
As far as hand tools, you can’t go wrong with their breaker bars and magnetic trays. Hard to get a breaker bar wrong but for the price and semi-regular coupons, you can’t beat it!
I needed some new jack stands as the roll pins broke on my old ones. I didn’t feel safe crawling under my truck working them manually. I made a trip to Harbor Freight and was impressed with the new locking pins. I bought a pair of them and I feel safe crawling under my vehicles. I unfortunately had a good friend that was crushed to death under a vehicle that he crawled under with only a hydraulic floor jack that failed.
You can't beat the us general tool boxes! Alot of bang for the buck. Also have had the three ton floor jack for years, never an issue. Wish they had the low profile ones back then.
When stationed in the Philippines, I ordered the Chicago electric impact driver. Along with impact sockets. That was in 1990, still use it and the sockets. My Harley Davidson loves them to remove primary sprocket.
Rental-Car Mechanic here, we have a couple of those floor jacks in the shop and they work great. watch out for the clips on the sides of the lifting arm, the can pop off letting the linkage on the sides to drop. (black bars at 10:18)
I'll buy Pittsburg any day over Craftsman, You can't go wrong with General, why would you need more than Daytona Stands?, I wouldn't know, Daytona Jacks are really nice last for years, what am I saying you are smart and know your stuff.
I work for state roads in West Virginia, I try to convince the mechanics we have to go to harbor freight for some of their stuff, but they insist on using the StrapOn truck ,some of those kids have debt they'll never get out of
bro i felt the irony as well when you realized how ignorant we been without having a creeper LOL! one afternoon my neighbor was offering me a craftsman creeper which he never uses since hes not really a mechanic(why he had it in the first place is beyond me) but I nearly denied taking it from him. And all I can say is WOW my back and life has changed wanting to see something under a car. anyone whose reading this and has a garage should pick one up. Its a must have for sure
I sold my 5 drawer blue cart and upgraded to the bigger cart, but other than that, I bought the exact same stuff you did. I upgraded from the aluminum stands and aluminum jack I used when racing. I've been a HF customer for a long time, buying "disposable" one use tools, but with their huge increase in quality, this former Matco tool truck guy is really happy with products from Harbor Freight.
I have found that the HF 1/2" electric impact wrench is great for heavy duty work. No issues after years of work on suspensions and other general auto repairs. I also like their bushing press and impact sockets.
I have the electric impact from their bauer brand, boy does that thing pack a mean punch. It literally is more powerful than the tire guys Milwaukee battery impact gun. Every time i go to change my tires he struggles with all of the eight lugnuts on each of my wheels. Meanwhile when im at home and have to do any service , my bauer just zips them right off nascar style. I used to use the extendable rachet when I worked on my vehicles at home but man am i glad i splurged on that bauer electric impact , it makes removing stubborn nuts and bolts a breeze!!! So i just leave the extendable rachet in my van for roadside emergencies now , i also love that rachet its great!!
I got their Bauer electric 1/2" impact for $49 during 2020. If it fits that thing does good work. One thing I noticed is you need a rated electrical extension if you want it to have full power, don't cheap out on cables.
I automatically subbed after seeing the color of your box You are a man after my own heart blue is the way I'm going with my tools boxes Jack creeper same blue that you have blue and black for everything
My favorite HF "tool" are the 20-bin organizer cases. I have about a dozen of these that I use for organizing hardware, connectors, screws, etc. They are also useful for keeping projects organized since you can keep screws, springs, components, etc separate by assembly group. The compartments don't shift around and contents don't spill out. I made a rack to store these in. Really nice cases that cost half of what other organizers cost and work just as well. Use WD-40 to remove the label off the front. Spray it on, let it soak in for an hour or so, and peels off clean.
as someone who mainly does my work either over the hood or on jack stands, on gravel, dirt, asphalt with dirt, asphalt, uneven concrete, etc. I have yet to pull out my creeper in quite some time. I love it when im on flat smooth concrete but other than that it’s cardboard or just a blanket
My favorite HF tool is the Serpentine Belt Tool Kit. The price is typically around $20, but can be less when coupons are available. No, you dont need this tool to change a serpentine belt, but it sure makes the job easier.
Many automotive stores such as OReilly and Autozone will loan (rent) you a serpentine belt tool (as well as many other tools) for free. If you only occasionally need one, this can be a great solution depending on how far away your nearest store is.
I am still using a 34 year old Harbor Freight Pittsburg 3 ton floor jack that I used at my commercial auto shop for 20 years. And that ain't no BS! Some of their stuff ain't to bad.
As a professional truck and diesel mechanic I highly recommend the US General tool cart and the Pittsburgh skate board. I own and use both daily. The cart is every bit as good as both the identical Mack and Snap-On ones other guys paid huge money for.
and you could have bought 1 bigger for 3/4 the price you paid for those 2. I bought a Husky brand tool box that's 60" long for the same price you paid for 1 of your 30" ones......
I recently went to the local harbor Freight store here in Reidsville, NC and bought the Daytona 4-ton heavy duty DS400S low profile floor jack (Hugger Orange) along with the Daytona floor jack cross beam that attaches to it in place of the saddle on the floor jack. This thing is a beast. It's heavy and it can lift up one side of either my '66 Chevy truck or my '94 Chevy Blazer with ease so that I can do brake jobs, tire rotations, etc. I like how Harbor Freight has been selling higher quality tools recently than in earlier years. Another good Harbor Freight automotive must-have tool is the Fortress 27-gallon 200 PSI vertical air compressor. I'm impressed at its quality. Along with it I purchased a hand crank air hose reel for 100 feet of air hose. I'm getting some things done in my shop nowadays.
I have both the Earthquake 1/2 inch 20v Impact and 12v ratchet. Both have been awesome! I took a scissors jack from an SUV, welded a 1/2 in drive socket on the crank and drive it up and down with the Earthquake! You just can't beat it on a highway needing to do a quick tire R/R! I stop and help people all the time.
The tool creeper is one of those things that you did not know you needed till you had one. Catches the nuts and bolts. Has a place for your magnetic light to hold and aim up and hold sockets and wrench’s It’s so simple it’s genius. It’s cheap. Way better than that piece of cardboard that something bounces or rolls off of when you move it The little parts holders on the creeper your on are great for holding single items or a single type of fastener but you can’t see or sort. Like I said. So simple it’s genius. Too cheap not to try
I liked the Daytona low profile jack so much I have two. Very happy with them, the price is right - and allows me to get under my Mustang with no drama. Mine is also the 'quick rise', don't remember what they call it - that raises the jack to the lifting point quickly until it encounters the load. Very helpful on trucks & SUV's.
I love the 1/2” extendable rachet. I’ve had it about ten years now and i use it for removing lugnuts on my f250 and my econoline250 plus i use it to do whatever mechanical work im doing to the trucks after i have used it to remove the wheels. Suspension, brakes, engine work, stubborn bumper bolts, hitch installs or removals, trailer ball install and removal. Anything
Good recommendations. The creeper is the main one for me. I cast my first one aside 30 years ago. I ordered another one, a month ago. Its about working smarter. 1990 Stang LX.
Great video. Thanks for the reviews. I'm really impressed with the Doyle brand tools HF has picked up. Their pliers, cutters, and crimpers are very good quality for the money, and their 6" vise is a beast.
I love there Jack they kick ass we use them all the time in my shop and on that tool cart I moved the tray from the side to the top opposite of the pull handle since I got it several of the guys in my shop have bought them also
There are cheap hacks to improve tools 1 & 2. Replace the set of fixed wheels with rotating wheels for the tool chest ($5 each at H.B.). Here's the fix to strengthen the Harbor Freight creeper, when it's new, flip it over & drill 1 hole 2" from the caster bolts (total of 6 holes) and fill it with "Great Stuff" expanding foam. $5 at Home Depot. I did mine and I'm 6'5" at 310 lbs. Works like a charm, it's solid as a rock, does not flex, and hasn't added any weight. Improved the strength of the platform and eliminate the caster problem while making the creeper last a lifetime.
I got the us general 8 drawer top box last christmas to replace my old 70s snap on that the airforce was going to throw away because it fell off a truck and was dented, still worked though, but the general is really nice, but barely fits on my craftsman roll away, I do have the other tools you shown just different brands, kids got me the craftsman jack, stands and creeper combo a few yrs ago, but like your husky the jack isnt low profile. We didnt have the harbor freight back then
The 5 drawer tool car i just bought for 199$ 70$ off on HF black Friday sale ends 4/10. I set the main box on its side and slid the legs around it, they just stood it up. I did have to use a square file to clean up the bolt holes in the bottom tray where the wheels mount. Paint or metal flash stopped the carriage bolt heads from engaging. But well constructed. Its a must have! I'll have to try that creeper, i have one but it doesn't roll well. HF impact socket set, extensions and swivels come in handy. Forget about those chrome ones - they snap right off.
I don't have the tool chest but I have one but Harbor Freight is my store. I'm disabled but my two mechanic sons loves when I give them gifts. The jack and stands, creeper are a blessing for them always use the coupons not to mention the little free gifts or plus coupons. Never had a problem with any of the tools. I agree, just a little more money for the top tools but the mid-grades are fine if your just starting out. Their safes are a must have as well, if you've never checked out Harbor Freight, you don't now what you're missing. They have a buffer set that my sons detailing friend borrows a lot from me.
I have the 3 ton low profile jack in black color. 2 years now no issues. I also have large orange jack stands from hobo freight for 10 years plus with no issues. They are heavy duty and hold up my sierra easily....
I got the exact one he has in the video a couple years ago, and I've lifted half my expedition up with it... both wheels off the ground on one side... Love that jack.
Just bought the same jack yesterday with the money I saved working on my wife's car.I love this jack , lifts my zero turn mower nice and high to clean the deck.
Had this exact same tool cart when I started at a dealership, now that I upgraded my work box I brought it home and she’s well worth it!! Same thing with that creeper im a bigger guy and I love using it at home.
I love my daytona jack they recently came put with a single peice handle for them and I just keep the original in my truck so if I need to bring it somewhere I just gotta pack the jack
Everything I have bought from harbor freight has been great. Even though some stuff is cheap. It works. Only thing I could complain about was the large exhaust expander. It was complete junk but they must have heard me cursing it out because they have a newer one that works great
in 2015 i bought the 4 drawer cabinet from harbor freight . it was $80 with a coupon . great cart . i also picked up the black Daytona floor jack , 3 ton , was about $100 . works fine .
multi meter and test light are a must for diagnosing most electrical problems and blown fuses, and a "popper box" which consists of a light and an auto resetting fuse breaker for finding short circuits, and a simple probe for telling if a wire is ground or hot is also a good tool to keep in the tool box for electrical work (or installing a car stereo and trying to make heads or tails of modern automotive electrics), as far as mechanicals, a good 1/2" drive breaker bar, a good set of impact sockets for said breaker bar, a good Ball Peen Hammer, a good Mini Sledge roughly 3lb, and a good set of screw drivers and pry bars should get you the basics, after that its just finding out what tools you use the most and having them on hand, great video, and a friend of mine has been telling me about the tool carts at Harbor Freight and the setup he's building currently around a set of US General boxes, pretty cool stuff to be fair that harbor freight is hauling out to market
DUDE I'm with you 1000% on the creeper. Put off buying one for years and years and the $40 spent I finally spent on it saved me a lot of sore muscles from army crawling on my back under the car and the little compartments on the side are great for holding a few sockets or nuts close so I don't have to chase them when they roll down the driveway! And yes, it's identical to the one the auto parts stores sell for $130. Also, their $30 electric impact wrench is a real hero. Can take my wheels off in no time! Doesn't fit in tight spaces but I primarily use it for lug nuts. I use a general mindset of not buying anything with more than 3-4 moving parts from HF LOL
Spot on on each item except the tool cabinet. I needed big storage capacity. US General was on my short list for tool cabinets until I saw what Tractor Supply Company offered. Competitive price and 24 inch drawer depth on the Big Red model.
I'm a home mechnic too although I was a regular one for 16 years. I couldn't resist the five drawer Chest. I bought 2 pair of stands a little bigger than yours and a lowprofile jack that was about $200 it's blue and silver can't remember the name. I also bought the red padded creaper with adjustable head rest, when doing clutch job and longer jobs you neck will thank you for it. I already have a nice snap on chest and upper box but I bought the 24 in combo box and chest for another hoby.For the money or just for the quality you can't beat them. Just as good as my old SO and way better than Husky or craftmen.. I also got the large stand up compressor and it's great large tank and stays up to heavy useage even sanding.If you have a riding mower their mower jack is also a great buy.I could go on for hours.Their tools are very good not likewhen they started out I tell lots of people and lots have to complane becaue they bought other tools for more money and can't face the truth. I have lots of SO stuff that lasted my life but I like extras for the shear bastment etc. so I don't have to walk so far large yard etc. anyway good vidio.
I picked up your recommendations torque wrench, pick set, pry bar, stripped bolt sockets in metric . Tool carts and chests are available cheap on marketplace used
The creepers are often a pita to use anyway. They’re always catching on something in the ground whether it be a stone, tool, hose, cord etc. main reason is when it’s wet or cold out.
Professional mechanic here. My take on the list - Tool cart: %100 agree, I have the Husky version of that tool cart and I can't believe I spent over ten years in professional shops without it. It holds the tools I use for %90 of my work, and I can move it to the work instead of walking to and from the chest. Great kit. Creeper: If you don't have a lift and have to work off Jack stands - you *will not* regret getting one. Unless you have long hair. The wheels have a tendency to eat it, and pony tails don't help. Jack stands: Some safety is better than no safety. That said - when you're under a car your life literally depends on those stands. Skip Harbor Freight and spend more money here. You will not regret buying a better set of stands. Jack: there are better options, but for a home work space the Daytona is probably adequate.
as a camaro & a firebird owner, both on custom built suspensions, as well as a lowered miata... i totally agree with the daytona jack! ...i got the "famous yellow" one & it goes under every car i got... & the 25" pittsburgh breaker bar, with the black & red handle, is one of the best bang for the buck bargains in that whole store! thanx dude, & god bless u to
I threw away a set of Harbor Freight jack stands that were not on the recall because the teeth on the cast post were full of slag from the casting process and those slag pieces prevented the teeth from fully engaging with the pawl. I never used them and I threw them out since I had them for a couple years and figured they weren't returnable at that point. I wasn't willing to risk my life for a pair of cheap jack stands. I do have the 3-ton Daytona low-profile garage jack since I have a C-6 Corvette and the jack will roll under the car to access the front jacking point. I had a standard garage jack that had a jacking pad that was too high to roll under the car so I replaced it with the low-profile type. It works well and I believe it's a good jack.
*@**6:51* Also- Notice the hole at the end of the lift post? The Old School design included 2 *roll pins* that you could tap in, preventing them from separating.
I bought the Pittsburg 1 1/2 ton aluminum racing floor jack because of it's light weight. It is very portable and easy to carry. It fits easily in the car trunk if you need to take it somewhere. I have several other 2 and 3 ton jacks for normal use in the garage but I use this one if I have a vehicle on the 4 post lift and have to jack something up. You don't strain to get it up onto the lift and it's small enough to be able to get it into most positions you need it for. It has a larger lifting surface than a bottle jack and is more stable.
Wheel chucks. I use 4 to block in front of my tires. 2 per tire. Air compressor . pry bars. A light. Boroscope to see what you can't. Tight spots, behind the engine. A code reader with a service manual for your specific vehicle
I have the HF creeper and one of the middle wheels snapped off. The whole area where the wheel connected to the plastic is gone. I've had it for 3 or 4 years and I use it seated while working on brakes, steering, suspension, etc. It's still works, I just turn it so the opposite side (plus I'm a cheapskate).
Most people dont know that snapon gets their jacks from the same company that hf does, and mac cornwell and matco carry the exact same creeper for 3 times the price
I agree, I have the creeper and jack stands. I just bought an upper and lower US General toolbox and the Daytona 1.5 ton alumina floor jack as I already have a 3 ton floor jack but didn't like lugging it around and the 1.5 ton jack is much easier to move to different locations.
I agree with all of your choices except for the creeper. I have had two of them. They claim they are rated for three hundred pounds but when I used them the plastic would crack where the casters attached to the base. I'm only 245 lbs and would only get a few months before they cracked. I bought the harbor freight metal framed one and it works great no issues.
I have had 2 of the creepers. Same type, but not harbor freight. The only time mine broke was when it threw it out of rage, and ran it over with a jeep.
Same thing happened with my 1st plastic one. If the caster hardware is even slightly loose, then the plastic snaps and casters fall off. No problems on the 2nd one over 1 yr later, but always verify hardware is snug every month or so. Also got the metal frame with red cushion version while on sale. Like this one much more as it's awesome for neck support when in elevated position. Just put magnetic dishes along frame to hold fasteners/tools. The Allen head on casters easily rounded out and had to weld 2 of the casters though.
the tool cart is great I've had one for years and used it in an industrial setting and it's logged a ton of miles being pushed around the plant. however i did upgrade the wheels and added a 3/4" sheet of plywood in the bottom shelf. but for DIY, it's great as is
100% agree. I think a good quality battery powered 3/8" impact is great to have as well as all the things you said. I use it a bunch on automotive and small engine applications
I have your first two choices, and went with Northern Tool for my jack stands, and Pittsburgh low profile for my jack. H.F. has been good and everything works well!
I just bought a 20v Earthquake XT 3/8 Impact. It came with a battery and charger in a hard plastic case and came to about $130 after tax and all. So far I really like it and has plenty of power for the jobs I'll use it for. I'm not a professional mechanic or anything, but I do plenty of work on my own vehicles.
I have similar products. I went with the 6 ton jackstand for my truck. I also went with the Daytona three ton professional jack. I was looking at that creeper yesterday and almost bought it. I will have to go back today and get it since it is on sale for $29.00.
A tool that's handy is that ratchet with the 3/8's on one end and 1/4 inch on the other. It's long and helps getting into hard to reach places. I had a tool that did the job, but that ratchet made it more easier. Spent most of my life improvising to make things work, tools are an investment that pay for themselves.
I have the 5 drawer tool cart, but I did buy the 34 service bank tool cart on Black Friday. I also have the 3 ton low profile Daytona floor jack. The 5 drawer and floor jack have held up great. I happen to own 2 6 ton Pitts jack stands. However, mine were not on the recall list so I never returned them.
You are correct when it comes to F body's. I own a 2002 camaro and it sits really low and you have to have a low profile jack to get under it. Then a jacks max lift always comes into affect when lifting anything high. That brand and model jack is the best for the price point. Unless someone is just going for brand name, but then they will spend a lot more for a jack that does the same thing. Great video and keep up the great work.
I go throw a hf jack every year for my race car.... my snap on Jack is over 10 years old and never have had a problem with it? I use it more them the hf jacks
The creeper also works great as a floor dolly to move large things around. One of the handiest tools I got from HF was the combo 1/4-3/8 ratchet with the extending handle. I have busted some really tough bolts with it!
Lower jack for a sports car... mine are not as nice as that but under an SUV just fine. Good list there, fully agree on the creeper. Dont use it often but when you need it it's great.
I have the jack and it is a beast! Before I had a older 3 ton craftsman that worked well but it was aging and I wanted something new. I opted for the heavy duty 250 dollar one in candy apple. One thing that I can't live without is my knee board. It's a plastic tray that has a thick layer of foam padding. Saves my knees from being on the bare ground or cement. I paid 25 bucks for one at lowes. I still have my old creeper that works great and have used it for about 10 years. Once it finally gives I might take a look at the Pittsburgh. I created my own style of Jackstands out of 2x4s that I call Wheel Cribs. The only problem is when you have to take the tire off then you have to use a regular jackstand. For oil changes and other type of maintenance the Cribs work great!
What are some other must-have tools for the DIY Mechanic?
Any cheap grease gun will save you plenty of time and money. Just have to remember to grease the fitting on your car or trucks. That is one of the biggest reasons they get dry and crack over time.
My go-to is the Pittsburgh Pro 1/2" flexhead extended ratchet and metric impact socket set, 10mm to 32mm sizes. Unfortunately I was disappointed with that creeper, it's "compatible" is 10 time's better.
A few Amazon items.. 1) Top Side Creeper JR is $28. It is great for leaning on vs. the plastic parts of the car when working topside. It helps you back a lot. 2) A set of Hose Spring Clamp Pliers. If your car has any of the spring clamps, the tool that fits them will save you a bunch of time. 3) Magnetic rechargeable work lights. 4) Magnetic spark plug socket [With extension if needed]. 5) (from eBay) I got two 5 gal plastic jugs for old oil and coolant. Most auto parts stores take used oil, but used coolant is harder. In my area, Advanced Auto parts has a location that will. These jugs have nice handles and lids for transport.
Well - not from Harbor Freight but last year I picked up a MILWAUKEE M18 FUEL 3/8 in. Mid-Torque Impact Wrench with 600ft lbs of torque. It is a game changer. I bought the 3/8 version ($230 from Home Depot with the battery and charger) as I work on smaller cars - not trucks - and the physical size fits into more places where I need it like the under carriage on my SuperCharged Mini Cooper. I told my wife after my first time using it “I could have been an actual mechanic if this impact wrench came into my life earlier.”
I went with a Milwaukee battery operated impact because I didn’t want to give up the floor space needed for a compressor for air driven impact. Plus the loud compressor would have upset the Audi/Porsche/Tesla houses in my neighborhood. The guys already don’t “love me” because I can fix my own $hit. It threatens their manhood when a project car arrives on a flatbed and week later I am driving it after repairs. Their wives like me…
I get all my tools from harbor freight sents they opened up an no longer go anywhere else
I still like my cardboard low-profile creeper.
👏👏👏👏👏
I use carboard all the time, especially when I have to go underneath my Mustang.
Yes, I’ve been sliding on cardboard forever. It also absorbs oil . I save all my cardboard.
@@fishypictures me too
Yes. Me too. I went to the local appliance warehouse years ago and loaded up the pickup with as much refrigerator cardboard boxes as I could fit. It now lays above the rafter of my garage to keep the heat down. There’s extra up there and when I need a new piece I reach up and grab one.
I can roll around on cardboard without wheels getting caught on little rocks or have the wheel of the creeper turned one way when I want to go another.
I tried one once and got pissed. I kicked it out from under the truck and never used it again
Blue must be your favorite color! It’s probably my favorite as well lol
Good guess! Lol 👍
I love your pull over. You should make one for women if you haven't already. It should say DIY Gal.
I went in to Harbor Freight to get some files to sharpen my chainsaw, left with a whole chainsaw sharpener, files were 15 and the sharpener was 30 so it was a no brainer for me. I don’t understand how they’re able to make it that cheap. Still works sharpened my chainsaw quicker and more times than a filer can.
As a mechanic I must say this is a great list. I used that tool cart for 4 years in a 4x4 shop and it was an awesome tool cart. It had all my normal daily tools that I always used in it but had a separate big box for the specialty tools which was the 72" with US general. I don't have a creeper but after this i'll probably have to grab one. Those Daytona Jacks definitely look way better built and I'd get a set if I didn't already have jack stands. Also I recommend the 12 ton stands for anyone with a lifted truck. They are tall enough to get most trucks on the frame rails and droop out the suspension. Also that Daytona floor jack is an impressive jack for sure. I've used them and work awesome. They stole the idea from SnapOn and copied it. Pretty sure they even went to court because of it so if you want a SnapOn jack without the SnapOn price that's the way to go. When my low pro HF jack gives up the ghost i'll be getting a Daytona.
As far as hand tools, you can’t go wrong with their breaker bars and magnetic trays. Hard to get a breaker bar wrong but for the price and semi-regular coupons, you can’t beat it!
Been using their breaker bars for a long time never had an issue
I needed some new jack stands as the roll pins broke on my old ones. I didn’t feel safe crawling under my truck working them manually. I made a trip to Harbor Freight and was impressed with the new locking pins. I bought a pair of them and I feel safe crawling under my vehicles. I unfortunately had a good friend that was crushed to death under a vehicle that he crawled under with only a hydraulic floor jack that failed.
You can't beat the us general tool boxes! Alot of bang for the buck. Also have had the three ton floor jack for years, never an issue. Wish they had the low profile ones back then.
I have a low profile pittsburgh jack for about fifteen years now. They had them back then, they just didnt havevthe daytona brand
same here . they weren't available when i bought my 3 ton Daytona jack . still , the one i got has served well .
When stationed in the Philippines, I ordered the Chicago electric impact driver. Along with impact sockets. That was in 1990, still use it and the sockets. My Harley Davidson loves them to remove primary sprocket.
Rental-Car Mechanic here, we have a couple of those floor jacks in the shop and they work great. watch out for the clips on the sides of the lifting arm, the can pop off letting the linkage on the sides to drop. (black bars at 10:18)
Thanks for the tip!
I'll buy Pittsburg any day over Craftsman, You can't go wrong with General, why would you need more than Daytona Stands?, I wouldn't know, Daytona Jacks are really nice last for years, what am I saying you are smart and know your stuff.
I work for state roads in West Virginia, I try to convince the mechanics we have to go to harbor freight for some of their stuff, but they insist on using the StrapOn truck ,some of those kids have debt they'll never get out of
bro i felt the irony as well when you realized how ignorant we been without having a creeper LOL!
one afternoon my neighbor was offering me a craftsman creeper which he never uses since hes not really a mechanic(why he had it in the first place is beyond me) but I nearly denied taking it from him. And all I can say is WOW my back and life has changed wanting to see something under a car. anyone whose reading this and has a garage should pick one up. Its a must have for sure
I sold my 5 drawer blue cart and upgraded to the bigger cart, but other than that, I bought the exact same stuff you did. I upgraded from the aluminum stands and aluminum jack I used when racing. I've been a HF customer for a long time, buying "disposable" one use tools, but with their huge increase in quality, this former Matco tool truck guy is really happy with products from Harbor Freight.
I have found that the HF 1/2" electric impact wrench is great for heavy duty work. No issues after years of work on suspensions and other general auto repairs. I also like their bushing press and impact sockets.
I have the electric impact from their bauer brand, boy does that thing pack a mean punch. It literally is more powerful than the tire guys Milwaukee battery impact gun. Every time i go to change my tires he struggles with all of the eight lugnuts on each of my wheels. Meanwhile when im at home and have to do any service , my bauer just zips them right off nascar style. I used to use the extendable rachet when I worked on my vehicles at home but man am i glad i splurged on that bauer electric impact , it makes removing stubborn nuts and bolts a breeze!!! So i just leave the extendable rachet in my van for roadside emergencies now , i also love that rachet its great!!
I got their Bauer electric 1/2" impact for $49 during 2020. If it fits that thing does good work. One thing I noticed is you need a rated electrical extension if you want it to have full power, don't cheap out on cables.
I automatically subbed after seeing the color of your box You are a man after my own heart blue is the way I'm going with my tools boxes Jack creeper same blue that you have blue and black for everything
My favorite HF "tool" are the 20-bin organizer cases. I have about a dozen of these that I use for organizing hardware, connectors, screws, etc. They are also useful for keeping projects organized since you can keep screws, springs, components, etc separate by assembly group. The compartments don't shift around and contents don't spill out. I made a rack to store these in. Really nice cases that cost half of what other organizers cost and work just as well. Use WD-40 to remove the label off the front. Spray it on, let it soak in for an hour or so, and peels off clean.
as someone who mainly does my work either over the hood or on jack stands, on gravel, dirt, asphalt with dirt, asphalt, uneven concrete, etc. I have yet to pull out my creeper in quite some time. I love it when im on flat smooth concrete but other than that it’s cardboard or just a blanket
My favorite HF tool is the Serpentine Belt Tool Kit.
The price is typically around $20, but can be less when coupons are available.
No, you dont need this tool to change a serpentine belt, but it sure makes the job easier.
Gotta spend money to make money 💰
Many automotive stores such as OReilly and Autozone will loan (rent) you a serpentine belt tool (as well as many other tools) for free. If you only occasionally need one, this can be a great solution depending on how far away your nearest store is.
I am still using a 34 year old Harbor Freight Pittsburg 3 ton floor jack that I used at my commercial auto shop for 20 years. And that ain't no BS! Some of their stuff ain't to bad.
As a professional truck and diesel mechanic I highly recommend the US General tool cart and the Pittsburgh skate board. I own and use both daily. The cart is every bit as good as both the identical Mack and Snap-On ones other guys paid huge money for.
I've had my two harbor freight roll around tool boxes for about 15 years. They still work great!
That’s awesome. If I ever need another box, it’ll be a US General.
Wow! I can't wait to get mine
I have one in blue also, with a coupon you cant beat it.
and you could have bought 1 bigger for 3/4 the price you paid for those 2. I bought a Husky brand tool box that's 60" long for the same price you paid for 1 of your 30" ones......
@@TheREALOC1972 good for you sir!
Great minds think alike, except for color, I also have these and agree they are life savers. Great call.
I recently went to the local harbor Freight store here in Reidsville, NC and bought the Daytona 4-ton heavy duty DS400S low profile floor jack (Hugger Orange) along with the Daytona floor jack cross beam that attaches to it in place of the saddle on the floor jack. This thing is a beast. It's heavy and it can lift up one side of either my '66 Chevy truck or my '94 Chevy Blazer with ease so that I can do brake jobs, tire rotations, etc. I like how Harbor Freight has been selling higher quality tools recently than in earlier years. Another good Harbor Freight automotive must-have tool is the Fortress 27-gallon 200 PSI vertical air compressor. I'm impressed at its quality. Along with it I purchased a hand crank air hose reel for 100 feet of air hose. I'm getting some things done in my shop nowadays.
Awesome 👍
Engine stand, engine hoist, a couple wheel chucks...and a light
I’ve got the lime green Daytona floor jack. Love it. The low profile is perfect for getting under my bird and the Poorvette.
I enjoyed using your jack so much I got one for myself!
I have both the Earthquake 1/2 inch 20v Impact and 12v ratchet. Both have been awesome! I took a scissors jack from an SUV, welded a 1/2 in drive socket on the crank and drive it up and down with the Earthquake! You just can't beat it on a highway needing to do a quick tire R/R! I stop and help people all the time.
All four are good buys.
Thanks for showing them.
Ty! I was looking for a present for my Hubby and that Creeper is perfect! He's out there every weekend almost under a car for someone. :D
The tool creeper is one of those things that you did not know you needed till you had one. Catches the nuts and bolts. Has a place for your magnetic light to hold and aim up and hold sockets and wrench’s It’s so simple it’s genius. It’s cheap. Way better than that piece of cardboard that something bounces or rolls off of when you move it The little parts holders on the creeper your on are great for holding single items or a single type of fastener but you can’t see or sort. Like I said. So simple it’s genius. Too cheap not to try
I bought a big harbor freight floor jack like 25 years ago and i still use it. Never had a problem with it. Its lifted some heavy stuff too.
Wow!!!!! I was waiting for the intro to say at the end welcome to jimbos garage!!!!!
I liked the Daytona low profile jack so much I have two. Very happy with them, the price is right - and allows me to get under my Mustang with no drama. Mine is also the 'quick rise', don't remember what they call it - that raises the jack to the lifting point quickly until it encounters the load. Very helpful on trucks & SUV's.
Yep, I bought 2 of the Kawasaki Green ones. Great jacks!
I love the 1/2” extendable rachet. I’ve had it about ten years now and i use it for removing lugnuts on my f250 and my econoline250 plus i use it to do whatever mechanical work im doing to the trucks after i have used it to remove the wheels. Suspension, brakes, engine work, stubborn bumper bolts, hitch installs or removals, trailer ball install and removal. Anything
The creeper is only good for concrete/asphalt drives my work areas are gravel or dirt so cardboard boxes/tarps are my only recourse!!
Build yourself a off-road creeper with golf cart tires .
Dirt mechanics are tougher.
I Always save the boxes from packages
This is me exactly - cardboard over the dirt/gravel - although the 'off-road' creeper build sounds fun!
I use old carpet runners or strips of old carpet to lay down on.
Thanks for pointing out the stop tabs on the jack stands... It took me a couple weeks to notice those, quite useful.
Good recommendations. The creeper is the main one for me. I cast my first one aside 30 years ago. I ordered another one, a month ago. Its about working smarter. 1990 Stang LX.
The wheels on the creeper disintegrate a lot faster than you would think they should.
Spot on. Springing a bit more for the long reach, low profile Daytona jack is the only modification I'd make to your list.
The long reach version would definitely come in handy from time to time!
Great video. Thanks for the reviews. I'm really impressed with the Doyle brand tools HF has picked up. Their pliers, cutters, and crimpers are very good quality for the money, and their 6" vise is a beast.
Excellent choices !! They also make a long reach low profile jack…
I love there Jack they kick ass we use them all the time in my shop and on that tool cart I moved the tray from the side to the top opposite of the pull handle since I got it several of the guys in my shop have bought them also
There are cheap hacks to improve tools 1 & 2. Replace the set of fixed wheels with rotating wheels for the tool chest ($5 each at H.B.). Here's the fix to strengthen the Harbor Freight creeper, when it's new, flip it over & drill 1 hole 2" from the caster bolts (total of 6 holes) and fill it with "Great Stuff" expanding foam. $5 at Home Depot. I did mine and I'm 6'5" at 310 lbs. Works like a charm, it's solid as a rock, does not flex, and hasn't added any weight. Improved the strength of the platform and eliminate the caster problem while making the creeper last a lifetime.
I've been eyeing that creeper for awhile now. I just noticed the two side trays there. I'm definitely sold now to go get one!
The wheels disintegrate a lot faster than you would think.
I got the us general 8 drawer top box last christmas to replace my old 70s snap on that the airforce was going to throw away because it fell off a truck and was dented, still worked though, but the general is really nice, but barely fits on my craftsman roll away, I do have the other tools you shown just different brands, kids got me the craftsman jack, stands and creeper combo a few yrs ago, but like your husky the jack isnt low profile. We didnt have the harbor freight back then
Creepers are a must if you are a mechanic! Nice video bud!
The 5 drawer tool car i just bought for 199$ 70$ off on HF black Friday sale ends 4/10.
I set the main box on its side and slid the legs around it, they just stood it up. I did have to use a square file to clean up the bolt holes in the bottom tray where the wheels mount. Paint or metal flash stopped the carriage bolt heads from engaging. But well constructed. Its a must have!
I'll have to try that creeper, i have one but it doesn't roll well.
HF impact socket set, extensions and swivels come in handy.
Forget about those chrome ones - they snap right off.
Great choices I have 3 and 4. Have to pick up 1 and 2. Also looking at 30 inch shop fan.
I don't have the tool chest but I have one but Harbor Freight is my store. I'm disabled but my two mechanic sons loves when I give them gifts. The jack and stands, creeper are a blessing for them always use the coupons not to mention the little free gifts or plus coupons. Never had a problem with any of the tools. I agree, just a little more money for the top tools but the mid-grades are fine if your just starting out. Their safes are a must have as well, if you've never checked out Harbor Freight, you don't now what you're missing. They have a buffer set that my sons detailing friend borrows a lot from me.
I have the 3 ton low profile jack in black color. 2 years now no issues. I also have large orange jack stands from hobo freight for 10 years plus with no issues. They are heavy duty and hold up my sierra easily....
I got the exact one he has in the video a couple years ago, and I've lifted half my expedition up with it... both wheels off the ground on one side... Love that jack.
Just bought the same jack yesterday with the money I saved working on my wife's car.I love this jack , lifts my zero turn mower nice and high to clean the deck.
The long reach low profile lifts higher and has the foot pump as well... really, really nice jack for the money.
Had this exact same tool cart when I started at a dealership, now that I upgraded my work box I brought it home and she’s well worth it!! Same thing with that creeper im a bigger guy and I love using it at home.
I love my daytona jack they recently came put with a single peice handle for them and I just keep the original in my truck so if I need to bring it somewhere I just gotta pack the jack
Everything I have bought from harbor freight has been great. Even though some stuff is cheap. It works. Only thing I could complain about was the large exhaust expander. It was complete junk but they must have heard me cursing it out because they have a newer one that works great
in 2015 i bought the 4 drawer cabinet from harbor freight . it was $80 with a coupon . great cart .
i also picked up the black Daytona floor jack , 3 ton , was about $100 . works fine .
multi meter and test light are a must for diagnosing most electrical problems and blown fuses, and a "popper box" which consists of a light and an auto resetting fuse breaker for finding short circuits, and a simple probe for telling if a wire is ground or hot is also a good tool to keep in the tool box for electrical work (or installing a car stereo and trying to make heads or tails of modern automotive electrics), as far as mechanicals, a good 1/2" drive breaker bar, a good set of impact sockets for said breaker bar, a good Ball Peen Hammer, a good Mini Sledge roughly 3lb, and a good set of screw drivers and pry bars should get you the basics, after that its just finding out what tools you use the most and having them on hand, great video, and a friend of mine has been telling me about the tool carts at Harbor Freight and the setup he's building currently around a set of US General boxes, pretty cool stuff to be fair that harbor freight is hauling out to market
I've got a pre-order for the tool box; they're back ordered at the moment. The jack and jack stands are also on the list.....
I’ve been eyeing up the creeper. A lot warmer than being on the cold ground.
True that! The padded headrest is pretty nice too.
I just bought one today it's actually really comfortable and really cheap I got mine on sale for 27 dallars
They are nice although, you’ll get real tired of hitting a small pebble or a wrench under the creeper.
@@codymcgowen5579 the back of my head also hates hitting those things! Lol
DUDE I'm with you 1000% on the creeper. Put off buying one for years and years and the $40 spent I finally spent on it saved me a lot of sore muscles from army crawling on my back under the car and the little compartments on the side are great for holding a few sockets or nuts close so I don't have to chase them when they roll down the driveway! And yes, it's identical to the one the auto parts stores sell for $130.
Also, their $30 electric impact wrench is a real hero. Can take my wheels off in no time! Doesn't fit in tight spaces but I primarily use it for lug nuts. I use a general mindset of not buying anything with more than 3-4 moving parts from HF LOL
I agree with 1, 3,and 4, I'm 65_years old and still work on vehicles, occasionally, I have never used a creeper, and dont want one, great job!
Spot on on each item except the tool cabinet. I needed big storage capacity. US General was on my short list for tool cabinets until I saw what Tractor Supply Company offered. Competitive price and 24 inch drawer depth on the Big Red model.
I agree. Go with the bigger 44" tool box.
I'm a home mechnic too although I was a regular one for 16 years. I couldn't resist the five drawer Chest. I bought 2 pair of stands a little bigger than yours and a lowprofile jack that was about $200 it's blue and silver can't remember the name. I also bought the red padded creaper with adjustable head rest, when doing clutch job and longer jobs you neck will thank you for it. I already have a nice snap on chest and upper box but I bought the 24 in combo box and chest for another hoby.For the money or just for the quality you can't beat them. Just as good as my old SO and way better than Husky or craftmen.. I also got the large stand up compressor and it's great large tank and stays up to heavy useage even sanding.If you have a riding mower their mower jack is also a great buy.I could go on for hours.Their tools are very good not likewhen they started out I tell lots of people and lots have to complane becaue they bought other tools for more money and can't face the truth. I have lots of SO stuff that lasted my life but I like extras for the shear bastment etc. so I don't have to walk so far large yard etc. anyway good vidio.
I've bought the 52" general toolbox with chest and the Daytona jack. Best things I've bought there.
I picked up your recommendations torque wrench, pick set, pry bar, stripped bolt sockets in metric .
Tool carts and chests are available cheap on marketplace used
The creepers are often a pita to use anyway. They’re always catching on something in the ground whether it be a stone, tool, hose, cord etc. main reason is when it’s wet or cold out.
Professional mechanic here. My take on the list -
Tool cart: %100 agree, I have the Husky version of that tool cart and I can't believe I spent over ten years in professional shops without it. It holds the tools I use for %90 of my work, and I can move it to the work instead of walking to and from the chest. Great kit.
Creeper: If you don't have a lift and have to work off Jack stands - you *will not* regret getting one. Unless you have long hair. The wheels have a tendency to eat it, and pony tails don't help.
Jack stands: Some safety is better than no safety. That said - when you're under a car your life literally depends on those stands. Skip Harbor Freight and spend more money here. You will not regret buying a better set of stands.
Jack: there are better options, but for a home work space the Daytona is probably adequate.
I have the same creeper and love it. I hit my head when getting out from under the car a lot less than before having one. Lol.
as a camaro & a firebird owner, both on custom built suspensions, as well as a lowered miata... i totally agree with the daytona jack! ...i got the "famous yellow" one & it goes under every car i got... & the 25" pittsburgh breaker bar, with the black & red handle, is one of the best bang for the buck bargains in that whole store! thanx dude, & god bless u to
I threw away a set of Harbor Freight jack stands that were not on the recall because the teeth on the cast post were full of slag from the casting process and those slag pieces prevented the teeth from fully engaging with the pawl. I never used them and I threw them out since I had them for a couple years and figured they weren't returnable at that point. I wasn't willing to risk my life for a pair of cheap jack stands.
I do have the 3-ton Daytona low-profile garage jack since I have a C-6 Corvette and the jack will roll under the car to access the front jacking point. I had a standard garage jack that had a jacking pad that was too high to roll under the car so I replaced it with the low-profile type. It works well and I believe it's a good jack.
*@**6:51*
Also-
Notice the hole at the end of the lift post?
The Old School design included 2 *roll pins* that you could tap in,
preventing them from separating.
I bought the Pittsburg 1 1/2 ton aluminum racing floor jack because of it's light weight. It is very portable and easy to carry. It fits easily in the car trunk if you need to take it somewhere. I have several other 2 and 3 ton jacks for normal use in the garage but I use this one if I have a vehicle on the 4 post lift and have to jack something up. You don't strain to get it up onto the lift and it's small enough to be able to get it into most positions you need it for. It has a larger lifting surface than a bottle jack and is more stable.
got the exact blue 3 ton floor jack. the most valued thing in my garage!
Wheel chucks. I use 4 to block in front of my tires. 2 per tire. Air compressor . pry bars. A light. Boroscope to see what you can't. Tight spots, behind the engine. A code reader with a service manual for your specific vehicle
I have the HF creeper and one of the middle wheels snapped off. The whole area where the wheel connected to the plastic is gone. I've had it for 3 or 4 years and I use it seated while working on brakes, steering, suspension, etc. It's still works, I just turn it so the opposite side (plus I'm a cheapskate).
We ve done that thing where you buy something and say "why did wait so long?" Did that with a leaf blower. Great video. 👍
Thanks man for making this video I'm getting that low profile jack tomorrow because of your video 👍🏽👍🏽
Most people dont know that snapon gets their jacks from the same company that hf does, and mac cornwell and matco carry the exact same creeper for 3 times the price
I also use my creeper when working underneath my kitchen sink. It brings you up level to the bottom of the cabinet.
I agree, I have the creeper and jack stands. I just bought an upper and lower US General toolbox and the Daytona 1.5 ton alumina floor jack as I already have a 3 ton floor jack but didn't like lugging it around and the 1.5 ton jack is much easier to move to different locations.
That 3 ton jack is pretty heavy for sure
I agree with all of your choices except for the creeper. I have had two of them. They claim they are rated for three hundred pounds but when I used them the plastic would crack where the casters attached to the base. I'm only 245 lbs and would only get a few months before they cracked. I bought the harbor freight metal framed one and it works great no issues.
Good to know. I’m just over two hundy… we’ll see how well it holds up.
I have had 2 of the creepers. Same type, but not harbor freight. The only time mine broke was when it threw it out of rage, and ran it over with a jeep.
I've got the red creeper hf from about 10 years ago, still working for me, was 230lbs now 190, it was cheap and held up well imo
Same thing happened with my 1st plastic one. If the caster hardware is even slightly loose, then the plastic snaps and casters fall off. No problems on the 2nd one over 1 yr later, but always verify hardware is snug every month or so.
Also got the metal frame with red cushion version while on sale. Like this one much more as it's awesome for neck support when in elevated position. Just put magnetic dishes along frame to hold fasteners/tools. The Allen head on casters easily rounded out and had to weld 2 of the casters though.
the tool cart is great I've had one for years and used it in an industrial setting and it's logged a ton of miles being pushed around the plant. however i did upgrade the wheels and added a 3/4" sheet of plywood in the bottom shelf. but for DIY, it's great as is
Nice vid, enjoyed it. Must have tools: Bench Vice, Bench Grinder, Inspection Lamp/Torch, Old style Stethescope (to pinpoint internal noises/wear). Cheers.
100% agree. I think a good quality battery powered 3/8" impact is great to have as well as all the things you said. I use it a bunch on automotive and small engine applications
I have your first two choices, and went with Northern Tool for my jack stands, and Pittsburgh low profile for my jack. H.F. has been good and everything works well!
I just bought a 20v Earthquake XT 3/8 Impact. It came with a battery and charger in a hard plastic case and came to about $130 after tax and all. So far I really like it and has plenty of power for the jobs I'll use it for. I'm not a professional mechanic or anything, but I do plenty of work on my own vehicles.
I have similar products. I went with the 6 ton jackstand for my truck. I also went with the Daytona three ton professional jack. I was looking at that creeper yesterday and almost bought it. I will have to go back today and get it since it is on sale for $29.00.
A tool that's handy is that ratchet with the 3/8's on one end and 1/4 inch on the other. It's long and helps getting into hard to reach places. I had a tool that did the job, but that ratchet made it more easier. Spent most of my life improvising to make things work, tools are an investment that pay for themselves.
I have the 5 drawer tool cart, but I did buy the 34 service bank tool cart on Black Friday. I also have the 3 ton low profile Daytona floor jack. The 5 drawer and floor jack have held up great. I happen to own 2 6 ton Pitts jack stands. However, mine were not on the recall list so I never returned them.
You are correct when it comes to F body's. I own a 2002 camaro and it sits really low and you have to have a low profile jack to get under it. Then a jacks max lift always comes into affect when lifting anything high. That brand and model jack is the best for the price point. Unless someone is just going for brand name, but then they will spend a lot more for a jack that does the same thing. Great video and keep up the great work.
I go throw a hf jack every year for my race car.... my snap on Jack is over 10 years old and never have had a problem with it? I use it more them the hf jacks
I have the 4 drawer tool cart and love it. I got it on sale a couple years ago for $150
Having the right tool makes a world of difference...I am a remodel contractor and I do everything but bricklaying so...
Great picks. Thank for the video and for sharing. I really appreciate the breakdown on the jack stands.
The creeper also works great as a floor dolly to move large things around. One of the handiest tools I got from HF was the combo 1/4-3/8 ratchet with the extending handle. I have busted some really tough bolts with it!
Lower jack for a sports car... mine are not as nice as that but under an SUV just fine. Good list there, fully agree on the creeper. Dont use it often but when you need it it's great.
Thanks for the video I have been wanting that Jack for a while, now i will be picking up the creeper too.
I’ve got the jack and the jack stands already. I really want the tool chest next. 👍🏻👍🏻
I have the jack and it is a beast! Before I had a older 3 ton craftsman that worked well but it was aging and I wanted something new. I opted for the heavy duty 250 dollar one in candy apple.
One thing that I can't live without is my knee board. It's a plastic tray that has a thick layer of foam padding. Saves my knees from being on the bare ground or cement. I paid 25 bucks for one at lowes.
I still have my old creeper that works great and have used it for about 10 years. Once it finally gives I might take a look at the Pittsburgh.
I created my own style of Jackstands out of 2x4s that I call Wheel Cribs. The only problem is when you have to take the tire off then you have to use a regular jackstand. For oil changes and other type of maintenance the Cribs work great!
I use the ole trusty slip and slide creeper with a little dawn dish soap. I always have extra wiggle room.
I've got a Daytona jack as well, I like using the top half of the handle as a cheater bar as well.
That’s a good idea! I’ll remember that.
I really enjoy my low profile jack, add to the list digital caliper, and 4.5" angle grinder.