CLEVER things to do with an Oscillating Multi-Tool!
HTML-код
- Опубликовано: 6 окт 2022
- ▼EXPAND THIS SECTION FOR IMPORTANT INFO▼
-Good blades at good price (not sponsored): amzn.to/3RLxDTW
-Carbide blades (not sponsored): amzn.to/3rCUVAT
★THIS VIDEO WAS MADE POSSIBLE BY★
Ridge Carbide's Premium Table Saw blades (Use coupon code SNWJ10): goo.gl/z8TP0k
Please help support us by using the link above for a quick look around!
(If you use one of these affiliate links, we may receive a small commission)
Some other useful links:
-More videos on our website: stumpynubs.com/
-Subscribe to our e-Magazine: stumpynubs.com/browse-and-sub...
-Check out our project plans: stumpynubs.com/product-catego...
-Instagram: / stumpynubs
-Twitter: / stumpynubs
★SOME OF MY FAVORITE CHEAP TOOLS★
-123 Blocks: lddy.no/vpij
-Mechanical Pencils: amzn.to/2PA7bwK
-Lumber pencil: amzn.to/2QtwZjv
-Pocket Measuring Tape: amzn.to/2kNTlI9
-Irwin Drill Bit Gauge: amzn.to/2AwTkQg
-Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
-Self-Centering Punch: amzn.to/2QvbcrC
-Self-Centering Bits: amzn.to/2xs71UW
-Angle Cube: lddy.no/10nam
-Steel Ruler: lddy.no/10mv7
-Utility knife: amzn.to/3nfhIiv
-Center-Finding Ruler: lddy.no/10nak
-Bit & Blade Cleaner: amzn.to/2TfvEOI
-Digital depth gauge: amzn.to/3mwRf2x
-Wood Glue: amzn.to/3mqek6M
-Spade Bits: amzn.to/3j8XPtD
★SOME OF MY FAVORITE HAND TOOLS★
-Digital Caliper: amzn.to/384H1Or
-Marking Gauge: lddy.no/10muz
-Marking knife: lddy.no/10mv0
-Narex Chisels: lddy.no/sqm3
-Stanley Sweetheart Chisels: amzn.to/3y5HDOc
-Mini Pull Saw: amzn.to/2UEHBz6
-Gent Saw: lddy.no/ss2x
-Coping saw: amzn.to/2W7ZiUS
-Shinwa Rulers: lddy.no/zl13
★SOME OF MY FAVORITE POWER TOOLS★
-Miter Saw: amzn.to/3gqIlQ8
-Jointer: amzn.to/3yc3gfZ
-Planer: amzn.to/3mn6BGF
-Router: amzn.to/3grD22S
-Sander: amzn.to/3DdvD0Y
-Cordless drill: amzn.to/3D9ZiIm
-Brad nailer: amzn.to/3gsRkjH
-Mini Compressor: amzn.to/3mvrmQr
-Bladerunner: amzn.to/2Wl0TtJ
-Jig Saw: amzn.to/3zetTBY
-Scroll Saw: amzn.to/3gq9qDc
-Multi-Tool: amzn.to/3muZuMi
★SOME OF MY FAVORITE OTHER TOOLS★
-Drill Bits: amzn.to/3B8Ckzh
-Forstner Bits: amzn.to/3kk3wEI
-Shop Vacuum: amzn.to/2Wkqnbl
-Machine Setup Blocks: amzn.to/3gq7kDh
-Counter-Sink Bit: amzn.to/37ZukUo
-Featherboard: amzn.to/3DeqHsq
-ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7
(If you use one of the affiliate links above, we may receive a small commission) 
Хобби
▼EXPAND THIS SECTION FOR IMPORTANT INFO▼
-Good blades at good price (not sponsored): amzn.to/3RLxDTW
-Carbide blades (not sponsored): amzn.to/3rCUVAT
★THIS VIDEO WAS MADE POSSIBLE BY★
Ridge Carbide's Premium Table Saw blades (Use coupon code SNWJ10): goo.gl/z8TP0k
*Please help support us by using the link above for a quick look around!*
(If you use one of these affiliate links, we may receive a small commission)
*Some other useful links:*
-More videos on our website: stumpynubs.com/
-Subscribe to our e-Magazine: stumpynubs.com/browse-and-subscribe/
-Check out our project plans: stumpynubs.com/product-category/plans/
-Instagram: instagram.com/stumpynubs/
-Twitter: twitter.com/StumpyNubs
★SOME OF MY FAVORITE CHEAP TOOLS★
-123 Blocks: lddy.no/vpij
-Mechanical Pencils: amzn.to/2PA7bwK
-Lumber pencil: amzn.to/2QtwZjv
-Pocket Measuring Tape: amzn.to/2kNTlI9
-Irwin Drill Bit Gauge: amzn.to/2AwTkQg
-Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
-Self-Centering Punch: amzn.to/2QvbcrC
-Self-Centering Bits: amzn.to/2xs71UW
-Angle Cube: lddy.no/10nam
-Steel Ruler: lddy.no/10mv7
-Utility knife: amzn.to/3nfhIiv
-Center-Finding Ruler: lddy.no/10nak
-Bit & Blade Cleaner: amzn.to/2TfvEOI
-Digital depth gauge: amzn.to/3mwRf2x
-Wood Glue: amzn.to/3mqek6M
-Spade Bits: amzn.to/3j8XPtD
★SOME OF MY FAVORITE HAND TOOLS★
-Digital Caliper: amzn.to/384H1Or
-Marking Gauge: lddy.no/10muz
-Marking knife: lddy.no/10mv0
-Narex Chisels: lddy.no/sqm3
-Stanley Sweetheart Chisels: amzn.to/3y5HDOc
-Mini Pull Saw: amzn.to/2UEHBz6
-Gent Saw: lddy.no/ss2x
-Coping saw: amzn.to/2W7ZiUS
-Shinwa Rulers: lddy.no/zl13
★SOME OF MY FAVORITE POWER TOOLS★
-Miter Saw: amzn.to/3gqIlQ8
-Jointer: amzn.to/3yc3gfZ
-Planer: amzn.to/3mn6BGF
-Router: amzn.to/3grD22S
-Sander: amzn.to/3DdvD0Y
-Cordless drill: amzn.to/3D9ZiIm
-Brad nailer: amzn.to/3gsRkjH
-Mini Compressor: amzn.to/3mvrmQr
-Bladerunner: amzn.to/2Wl0TtJ
-Jig Saw: amzn.to/3zetTBY
-Scroll Saw: amzn.to/3gq9qDc
-Multi-Tool: amzn.to/3muZuMi
★SOME OF MY FAVORITE OTHER TOOLS★
-Drill Bits: amzn.to/3B8Ckzh
-Forstner Bits: amzn.to/3kk3wEI
-Shop Vacuum: amzn.to/2Wkqnbl
-Machine Setup Blocks: amzn.to/3gq7kDh
-Counter-Sink Bit: amzn.to/37ZukUo
-Featherboard: amzn.to/3DeqHsq
-ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7
(If you use one of the affiliate links above, we may receive a small commission)
Straight up I just don't care for wireless I mean it serves a purpose like if I just can't get a cord long enough but if I can get a cord long enough I just use the corded I don't even bother with wireless much anymore
@@rebeccachambers4701 Oh I don’t know about that one at all. I love cordless compared to my early stuff of the 80s and 90s. Still I don’t use it for HD things and items I use very infrequently…..like this tool here. On the other hand if you’re a farmer or mechanic who works in the boonies ect. they are essential . Both types have their places and better usages.
Gg%
I never even thought of putting the blade on sideways for tough to reach areas. I feel like such an idiot for not thinking of that. Ha. I already learned like 3 things and I'm only 3:24 into this video. Thank you Stumpy Nubs. (BTW, I have a stumpy nub on my left hand. 5 years ago I was cutting a 2" piece of hardwood concave 3/4' round shoe base trim at a left 45 degree miter angle and had removed the guard on my miter saw. Needless to say, that was a bad idea. The saw blade hit the wood and pulled it into the blade with my finger still holding the wood. It didn't cut off my left index finger but it shredded it real good. Shredded the bone too and chunked out muscle, tendons, and skin. Got rushed to the E.R. and ended up having the last quarter of my finger amputated, right at the first knuckle. Always keep your guard on your miter saw and back up small pieces of wood with a longer backing piece and keep fingers clear.) God bless.
Great video
Enjoy your videos. No distracting crappy music to tolerate and you articulate your points very well. Thank you.
As an old instructional video producer I especially appreciate your use of the television medium: straight shots with minimum and only appropriate movement, few or no special effects, serious discussion of your subject, closeups with movement only when absolutely necessary to show your subject, and well prepared delivery. Great work and keep it up.
And only useful for people without common sense.
I was just looking at a $1500 laser level that has automatic target lock on capability that's made by Leica and they're a company a lot of engineers buy their tools from. Instead of demonstrating the unique capability of the laser level on the commercial, they have 2 male engineers staring at the rear end of this female engineer who has the ML180. I thought surely there has to be a demonstration and I even asked Leica themselves and they said no. So for their top of the line laser level model, all I know is that womans rear end. I would have fired every person who worked on that commercial. It's hard to fathom how stupid things have become.
You don't like jump cuts, background music, sound effects, visual effects, zooming in-and-out constantly, focusing on the face of the person instead of the product? Weird.
The usual down-to earth clarity we've come to love about your videos. Mercifully no *^&%^$%#$ music. Thank you. (And that from a musician!)
@@edide1627 How so?
FYI, the original oscillating saw was patented in 1947 by Dr. Homer Stryker. It has been used in the medical field since then. I first used it in the mid seventies when we found out it worked very well on fiberglass panels. Cuts them like butter with not too much dust. We called them “Bone saws”. They were also used to remove casts from a patient without cutting skin. Back then the only problem was that you had to purchase the Styker blades from a medical supply house and they were expensive. Look up Styker, they are still in business today.
Cast removal was my first run in. Like all kids, you think the blade is rotating around and it terrifies you. Then, they tell you to touch it and it terrifies you more. Then the Dr. touches it and you feel better, but still terrified because of the sound. Lol.
Also Stryker is a monster company. More than just still in business.
@@xoxo2008oxox yes, I agree with you. And the price of everything has gone up and the quality has gone done.
Right you are. I used them for years to remove and bi-valve casts.
@@shirothehero0609 Stryker makes many hundreds of products that are used in the medical field. You will see their name on those yellow ambulance stretchers, hospital beds and so many other pieces of equipment that we use in the hospital. They also have a recycling division that comes and collects all the wires and cables we use, sterilizes them for reuse or reclaims the useful metals.
I remembered first seeing one was when my doctor removed the cast on my broken arm with one. I was intrigued that it cut it open without cutting into my arm 😂
I do like your straightforward approach, no distactions, just information. Thank you.
As a Registered Nurse, I've used oscillating saws for almost 40 years in cast removal. They are safe because they would not readily cut skin when they penetrated the cast during removal. They are also used extensively in orthopedic and neurosurgery to cut bone. I never thought about the patent issues that kept this tool from crossing over to the woodworker and building trades. I just used a masonry blade for the first time a couple of weeks ago to cut slots in mortar joints to mount decorative lighting around a pool deck. Worked like a charm. Also great for grout removal in tile work.
My first thought was all the casts I had cut off with one of them.
The first one I saw was having a cast removed in 1973 when I was in second grade. Now I have a corded one and a cordless. One of my favorite tools. I recently saw a blade that was a rectangle and would cut a hole in drywall for an outlet box in one step. Pure genius!
True, I had a cast cut off in 1963 with an oscillating tool
I recall when oscillating saws first became ubiquitous, after Fein's patent had expired, I brought one on the job, as a finish carpenter, and my boss at the time made fun of it, calling it the 'stupid saw'. Long story short, it wasn't too long before everyone on the crew was laughing at him multiple times a day when he would request the services of the 'stupid saw'. The name stuck but strictly in an ironic manner.
I call ig a Jiggle Saw.
I couldn't believe it either, unstuck wood painted windows
That's awesome
@@dougmatthews2316 'wiggle tool'…. 😄
I don't miss the 45$ blades before the patent expired!!!!
I call it by the noise it makes
Using tape to control the plunge cut is a fine idea. Your channel is terrific.
Tape on a z axis drill bit works too
Best clarity of speaking on RUclips
Thank you for a great video! I thought I had oscilliating saws down pat, but you definitely provided a number of tips that I would not have thought of. It makes me want to run down to the shop to try them all out!
Thank you Stumpy for all the great tips.
You produce great videos !!
I have a tip I would like to add.
In many cases, you can move the cutting edge of the blade slightly left and right, in addition to the oscillating motion, which greatly helps cutting efficiency and reduces blade burning.
This oscillating multi tool, is often one of my favorite tools.
These things are MAGIC for drywall work.
I've wanted one of these tools for a while now. I'm glad I watched this video before getting my hands on one, and possibly damaging it, or whatever I might use it on.
You do a great job on these videos, and I, for one, really appreciate the time, effort, and information you put into them. Thank you.👍
Watching a stumpy nubs tutorial is always like going over exam questions after the exam - I’m so relieved when he says something that I got right 😮💨🙏🏻
The fact that these didn't exist in mass production until 2008 makes A lot of sense now, thank you! I randomly got one from harbor freight probably around 2010 or so. It turned out that I was blown away by how useful it was. Not long after that, we had a project at my parents house that required cutting a lot of nails off flush with the end of wood, and that sold my dad on it. He is an incredibly handy man who seemingly can fix everything, and I remember us talking about 10 years ago and he was wondering how in the world had he had never seen such a tool before. Both him and I certainly have one in our tool collection these days.
It's so useful I'm a handyman maintenance guy and I use it all the time. Get painted windows unstuck, removing grout , caulk around showers,
just took the dive and bought my first multi tool; was really surprised with it! Thanks for this video, I appreciate it and love the tips. Love your tutorials, btw.
One tip I have picked up is that you can also mount 2 blades back to back, which in effect helps you cut a parallel channel in drywall or wood for running wires etc
Not really. The vibratory action and flexibility of the blades distort for a parallel cut.
Now that’s an idea I have to try out! Thanks!
This works a treat with 2 semi circular blades with a spacer set between them and a longer mounting bolt/screw.
@@michaelhamerin3814 It works very well if you use the right blade choice.
Wow. I am about to run 100 ft of various Romex. I am going to try that.
I paid $450 for my first one - the Fein corded original - in the mid 80's. I still have it plus two cordless Makitas. I figured you would miss some of the tricks I have learned over the years, but no, you covered it all. As usual :-)
Fein the original & the best.
I still have my original corded Fein from 20 odd years ago but these days I most often use my Dewalt 20 volt cordless multi tool.
That must be around a thousand dollars in today's money. Tools were sure built solid then.
@@jamesrecknor6752 The price of these types of tools was hideous when they were only considered a 'specialists tool'
Price for the tool have gone but the price for the blades are ridiculously expensive.
Got mine as a Christmas gift from my late father in law right after HFT started selling them. It's corded and single speed but I love the tool. I have since bought another because the first one has sentimental value. Your video has some really good tips.
Thank you so much sir! I have had one of these for years, and it spends most of its time on the shelf. I’m hoping your tips and tricks will unleash it to its full potential.
I saw one of these tools used for the first time about a year ago. Got one for Father's Day and what a game changer! Your tips here are going to be very helpful for my upcoming projects.
Great video! I have a very inexpensive and basic oscillating tool, which is great for my needs as I don't use it very frequently. As a result, I've never taken the time to learn its finer points. But this video really filled in the gaps, and now maybe I'll pull it out of the drawer more often. Thanks for making this.
Stumpy: Thank you again. It is obvious that you work hard on planning what you want to communicate and the result is great. Great content. Great communication.
I watched one of my contractors use this to clean out a rotted section of a door frame, and it's now on my need-to-get list. Thank you for your timely video!
Nicely narrated with a pleasant voice and no unnecessary padding of the content. I enjoyed this video and found it very informative.
Thank you for this. I really hope you do the follow up video soon, because I planed to buy one for drywalls probably this winter, so it will be appreciated.
Thank you for all your videos on woodworking. You really helped me getting started.
I LOVE mine. I work construction and got one a couple years ago, it makes you wonder how anybody got anything done without it lol. It's the perfect tool for so many things. My favorite one being probably doing floors. You can use this tool to cut off the bottom of trim and door frames to slide the floor underneath it, gives a super clean look (you don't have to worry about edges of the floor cuts being perfect as they'll be hidden under the trim) and takes about 30 seconds and your door is prepped.
This is probably the most useful DIY video I have yet seen on RUclips, opening my eyes to how to properly use one of the most useful powertools you can get. 👍
Thank you James. I have had a Fein MM for years for grunt work rehabbing houses mostly. Just now learning to apply it to my craft woodwork. The finger sanding discs are great for sanding small projects. Great idea re-using the center of orbital pads for the fingers. MM is loud as he** but very versatile.
Wow! I'm completely new to using a multi-tool and have already watched 3 or 4 tutorial videos but FINALLY - you have covered ALL the bases in great detail without rambling. Articulate, concise, comprehensive, excellent visuals. Grade A tutorial - thank you!
This video lived up to its billing! Bought mine to cut door trim for vinyl tile installation, but never realized all the uses it had. Great video!
I learned a lot from your video. I have two of these tools. one is cordless and other is corded. I will be applying your tips when needed on future projects. Thanks again for making this video!
When hitting the mark is important, I score a line with a knife or chisel. The blade is less apt to jump out of the groove I made.
One tip you might want to include is that the (steel) blades can often be sharpened! I've used a jeweler's file to re-sharpen a blade many times, it works rather well.
I built a cradle to hold my rotary tool horizontal with a sharp edged silicon carbide (green)stone. Then added a platform to rest my dull blade on and gently feed it into the spinning stone. Fast!
Totally agree with sharpening the blades as they do get dull quickly.
Another thing, meantion that a lot of times you can use alcohol or thinner and clean the blade to resharpen. A lot of times the teeth are just clogged
You can buy 100 blades on line for 50 bucks. And they seem just as good as the ao dollar blades
@@stevenwood9646 I’m interested, do you have a link? Thx👍🏻
SUPER informative. I've only been using multi-tools for about 5 years. Started with a cheap Harbor Freight, then realized what a game changer they are. I then upgraded to a Ryobi cordless. I keep the Harby around and still use it quite often. GREAT deal on those blades too. THANKS!!
What a fantastic video. After watching your demonstrations, I think back to all of the times I was using the wrong tool for the job as my multi tool just sat buried in my box. Thank you sir.
I really love how concise you are.
Thank you for making content!
Great video James. My oscillating tool is dubbed the “tool I forget I own” more often than I want to admit. It has gotten me out of many jams and now with your video I actually know how to use it better!
Interesting how different some people see the same thing. My oscillator has risen through the ranks and tied with the impact driver for my most used tool. I can't remember a job I did where I DIDN'T use it at least once.
Either oscillator or dremmel with flex shaft for rusted toilet bolts. Hacksaws suck in that area
@@justinayers3589, on the job I bought mine Fein Tool for (stair railing project), the homeowner asked me to cut a hole for a bedroom door latch, which had been neglected for a decade. A Feign tool and plunge cut was perfect for cutting a hole for the door to latch into. A bit of chisel work and a annoying task was cut down to just minutes.
I too forget quite often I have one.Actually two.😊Blades are actually a problem to get and expensive in sunny South Africa.
Okay. I thought I would at least learn a little... I learned a lot! I've been using this tool for years and 10 minutes of watching this video has completely changed how I'll use it in the future. Thank you very, very much. Great video!
Thank you so much for this video! I just purchased an inexpensive oscillating tool at Harbor Freight and a couple of blades on sale - thought it would be good to learn with. Had no idea how to use it, but now I feel confident enough to try it out.
The scraper blade attachment is my absolute favourite, takes dried glue off like no other.
Good amazon find on the blades, I recently had to sand many small cnc bridge tabs off a ply project, stuck self adhesive sandpaper to an old worn blade and it worked perfect!
That disclaimer at the beginning was for real! Today I learned a thing or two from a Red Wings fan about one of my favorite tools. Thank you, sir!
Right tool for the job as they say. I never quite appreciated the oscillating tool until I started into a bunch of interior remodeling a few years ago; It’s indispensable in that area. Now I’m building a deck and dock platform and only have only used an oscillating tool once in the past month. I don’t do much fine woodworking and am not sure how useful they are in that capacity, but I’m sure they have a uses.
Whilst my Multi-tool is the least used tool in my shop, when I do use it it's usually because no other tool will do the job as efficiently or at all. Always grateful for your videos
Well done video. Thank you. I picked my tool up to cut door trim and such for flooring installation and it worked brilliantly. I've also used it to refurbish a seriously abused cast iron pan and to cut back a stone fireplace hearth. The cast iron pan was almost a fun job. The hearth job was thankless but fortunately the circle carbide blade was far faster than any other tool I threw at it. I see people still fumbling away with more conventional tools that this beast can do quickly and with a bit of finesse.
Thanks again for a great video.
Great tips. Thanks. I didn’t find a good use for the larger sanding triangle either, but the small finger is essential for sanding narrow epoxy spots when building wood epoxy boats. If I try to do it by hand, I have the tendency to round the area. The finger attachment allows me to keep crisper edges and flat bottoms. I always remove the blades for storage, mainly because the tub I keep it in is too short for the tool plus blade.
Thank you for this video I don't have one yet and have been looking into them. This makes it easier to understand what I need to look for. I've been looking for one to help rough out my woodcarvings. Keep the great videos coming I watch them all.
get one and you'll soon wonder how you lived without it. they can get you out of so many jams - plunge cuts are so useful
Just got my oscillating tool a while back thanks so much for this primer! It was really helpful.
Recently bought one of these, probably one of the most useful tools I have ever bought. Thought it was a gimmick before until I used it. It's ability to do straight plunge cuts while the piece is in place is amazing, cutting perfect squares out of plasterboard for electrical stuff is easy, as is cutting off bits of door frames when doing flooring and trying to get the floor under the door frame without having to take the door frame off to cut it.
Bought mine on a lark and justified the purchase as being a birthday gift a couple of years ago. Plus I needed to make like two flush cuts on some baseboard. Two years later, and this thing has become indispensable in my shop. Never would have thought it could come in useful in so many different ways! I'm especially fond of the chisel blade--it helped me immensely to remove old, glued-on plywood underlayment in a recent bathroom remodel.
I also never thought about being able to actually touch the blade while in use. THAT might be a game-changer for me in the future. Thanks, SN!
Originally, they were used by orthopedic doctors to remove casts.
@@ohmike813 Oh wow, I always wondered how they were able to use what seemed like a spinning disk to cut casts without also cutting the skin. This makes perfect sense! Thanks :)
Betcha you could use the those weird saws 0:17 Then start realising that that weird thingee could cut all I waanted and never cut a person's. It became the darling on that ward.
This is one of those tools that most people first saw on an early morning infomercial and because of that they thought it was probably not that great, myself included. Then once you actually used it you realized how you ever lived your life without it.
This is my go to tool for all home renovations.
Your presentation is excellent. Choice of words and clarity. I use a multitool regularly and can always learn new tricks!
What an excellent video! This is probably my most overlooked power tool, and one with the most untapped potential! Thank you!
I remember the first time I saw an oscillating tool which was in the early 90’s. I was working as a floor installer for a pretty large flooring company. I was an apprentice back then and my job was to always cut door casing for flooring to go underneath for a cleaner look. We had a Crain undercut saw but there were a lot of areas that the Crain couldn’t get to so I would use a hand saw. A reciprocating saw was also an option but I was still too green to comfortably get a good clean cut with one.
Anyway, Fein came to do a demonstration at our warehouse and my mind was blown! We ended up buying a bunch of them from Fein and never looked back. I am now a finish carpenter, mainly doing cabinet installation, but my multi tool is one of the tools that is always in the truck. It doesnt get a ton of use, but its a life saver when I reach for it!!
Cool video
Yup! My first one was a Fein corded one. Still got it. They designed a profile sanding accessory as well and I got one. When I bought a cordless multitool from a different manufacturer I tried to modify the profile sander to fit it but couldn't.
If I want to use it I've got to get the fein out.
Multi tools need to be cordless just like drill/drivers and be toolless blade replacement just like jigsaw.
Came to the comments for this exact tool. Im a floor layer as well and i absolutely hate using the jamb saw/undercut saw. For starters, its just way too powerful for its intended purpose and it often sends a peice flying across the room.
Also, as its intended to be used by cutting around the jamb without having to stop, which means using upto 3 out of the 4 quadrants of the blade during 1 cut.
Not to mention what can happen if you hit a nail (yes, ive broken windows, more than once) or pehaps accidentally go in a bit to far without realising the house is steel framed (yes, done this too, only once though, actually shattered and broke a decent chunk off the blade, had a bit of a sore shoulder and hand after the kickback threw my arm into the wall as well)
This is gonna sounds stupid, but being from Australia, where basically everything wants to kill us, we kinda get raised to have a fearless mentality and a nonchalant attitude towards everything, however, nothing scares the shit outta me more than when i have to use the bloody undercut saw, which has been 5 days a week for nearly 15 years now.
I've experienced kickback from other saws (chainsaws, circular saws etc.) before, but they dont even come close to an undercut saw. I think its something about being on your knees with limited mobility and having no way to know when it's gonna happen and no way get out the way of anything. It's basically a game of 'jamb saw roulette'.
@@davidashton2361 I just got my first multitool to cut rectangular holes in weatherboard to install vents. Got sold up to the one with starlock system of toolfree blade changing. Thank god. I hate fiddling with that crap
Some really great tips here, thank you! For me, mine has proved it's worth when I had leaks under two of my sinks, saturating the cheap, unsealed particle board cabinet and dishing the bottom (in one case, almost 5 inches (!)). I was able to use the tool to remove the bottoms, and then replace them with clear coated Baltic Birch plywood (ah, memories). In the tight areas, the oscillating tool made removal a quick and easy process.
I didn’t realize the versatility of this tool. Thank you for making this video!
Have always loved my multi-tool saw, but watching your video have me a whole new appreciation for it, and whole lot of new ideas for upcoming projects.
That was really helpful. I just started looking at oscillating multi-tools. Now I know what to buy. Thanks so much.
Mate, your tip about reusing orbital sander pads on the oscillator is sheer genius. Simple, efficient and elegant. Economy wrapped in brilliance dear James, thank you for brightening my mind and my day with such a clever tip, kind of as usual but truly eleven out of ten for this morning’s efforts, I’m in Aust so 9:30 am and just getting into the day after breakfast and this clip, excellent mate, you’ve given me a great start to the day, hope yours is even better, 😎👍
great positive comment
My favourite attachment is a carbide rasp I use it for shaping wood it removes wood fast although it dose leave a rough finish it's now my go too for shaping.
great video. this tool is amazing. great for remodeling jobs like flooring that is thicker, you can trim the molding on the bottom without removing. it definitely was a game changer for me
Thank you for this well-produced, excellent video! This video provided me a heck of a lot more information about which oscillating blade to pick for which job. Some of your information contradicts what I've seen on other videos, but I feel very confident that you have it right because the information makes perfect sense.
I bought one of these several years ago. I selected the Porter Cable for a couple of reasons. The first and main reason was because of the quick blade change; lift a lever and change the blade. I can change a blade in seconds. Many brands had a complicated screw mechanism for changing the blade. The other feature I looked for was the speed control. This is a must!
Another on the Rockwell RK5151K is differing angles of attack (basically the swinging back and forth of the blade).
I found the best use for the sanding pads is to wrap a wet microfibre cloth around them to remove grout haze from wall tiles, especially the stickier stuff like Fusion Pro.
Good tip
Brilliant tip.That grout is always a pain in the a.. to get off.
I learned just now to turn my blade backwards 🤦🏻♂️…you’re the first content creator I’ve heard say this,and I’m not joking!Youre definitely my favorite cause you have taught me more than any one of these guys and I just started watching you last night.Thanks brother!
I have been using Ridge Carbide blades for last 30 years they are absolutely the best!!
Great video! I bought my Bosch corded multitool when the first Fein-a-like clones came out, it always goes on jobs “just in case”, and I still love it. Most unexpected use - using a diamond edged half-circle blade that cost nearly as much as the tool to remove ancient rock hard wall tile adhesive. Nothing else would shift it short of demolition.
Regarding sanding: I agree that the hook & loop type sanding pads aren’t the best match for these tools. However, I’ve had very good luck attaching PSA backed sandpaper to one side of a scraper blade and using that in hard to reach places with great success. I highly recommend keeping that one in your arsenal of sanding tools.
Great tips! I have bee using these tools for about 8 years and just learned some new techniques
Back in my remodeling days first tools out of the truck were toolbags, 8lb. sledge hammer and Milwaukee heavy duty Sawzall. Now it's toolbags and multi tool. I.live in a small town on Texas Coast and different blades are alittle difficult to buy from our lumber yard or the blue big box store in the next big town. But they make blades for almost everything you can think of. Great video keep them coming
FYI, I have found an oscillating tool with the scraper blade to be the best way to remove that white roof sealer from RVs with metal roofs.
If whatever you're scraping is coming off easy, it's faster to scrape it by hand but if it's something that's not wanting to let go, multitool is way faster.
Another timely lesson from the University of Woodworking and Professor James Hamilton!!! Well done and educational. I didn't realize I wasn't using my tool properly. Some excellent tips. Thank you!
UW - Hamilton
can you get us some jerseys?
After watching this, I went and bought me one. Don’t know what I’ll use it for right now but I have a lot of projects that it’ll come in handy for! Thanks for such an interesting and informative video about this tool.
I haven't used carbide and sandpaper on the block blew me away. I think I know everything now. Thanks for the vid.
Observation: the fine pigtails caused by the narrow range of motion are lessened by a longer tool blade. So if you want to finish sand in a tight corner, take a worn blade, rivet an extension to it, and attach your sandpaper to the extension. That's my theory, going to by my first OMT tomorrow! Great video!
How’d that go
I discovered another use for the sharp scraper blades. I re-soled my work boots (Vibram soles and Barge cement) and needed to trim them to fit (I take a size 13 boot, but Vibram only offers size 12 and 14 replacement soles). I tried my oscillating tool with several toothed blades and made a smelly mess of things. I switched to the scraper blade and it was like cutting butter--smooth, fast cutting of the rubber.
Fyi , When cutting rubber keep the blade wet . Works better with knives of any kind. 😀😎🇦🇺👌
@@rodmills4071 Dish soap for cutting lube works miracles when cutting rubber, and rinses off pretty readily afterwards.
They work great for cutting the customizable foam in cases too
Once again thanks for your advice!I will definitely apply this technique next time I’m using my oscillating/multitool 🤘🏼
Thanks for the link to the big set of blades, I really like that they come with a case!
I tend to only use my multi tool to sand in spots because sanding killed my first multi tool by vibrating the switch apart. I also tend to remove the blade on my tool for storage because most times I will be doing something different with it next time I use it, I had a Rockwell years ago that came with a soft bag and that bag is great.
Thanks for the sandpaper tip, because I don't sand a lot that tip will fit my work flow better than buying precut sandpaper.
Selected Summary:
For a plunge cut, start with the corner of a blade.
Use the corner to follow a line, to make a curf.
Use a block of scrap to align the blade perpendicular to service.
Let the tool do the work, especially to allow the dust to come out of the cut.
Don’t be afraid to touch the oscillating head (AWAY from the blade).
Use tape instead of on blade marks to measure depth.
Use blades with extended width blades
Maybe grind away part of an extended blade so that is is shallower, and allow smaller radium cuts.
Half circle blades work well for straight lines, and pipe.
Cutting metal-slow down the speed.
Cutting metal-use less pressure.
Wood cutting blades have large teeth, and greater spacing.
Metal cutting have shorter teeth, and narrower spacing.
Bimetal blades have a body of spring steel, and teeth of harder steel.
Carbide TOOTH blades will go through screws and sheet metal. Maybe the best blade for metal, but not for wood.
Instead of scrapers, maybe just use dull worn out blades.
Storage: Turn the blade backwards (to protect the blade).
Dope shit
That's what he said.
Thank you. The summary helps to reinforce the information.
Saved me watching the remaining 9 minutes only to find no new info. You should provide this service to all other RUclips videos / tv / radio / the government. Cheers dude!
take the blade off to store / take the bit out of the drill to store
Side note on the sander head, low and slow. I’ve seen the pad melt in seconds on the high setting. Good vid as always.
Thanks Stumpy, I learn something every time I watch your videos. I also got some good ideas from your commenters. (Please) Keep them coming.
As always your comments are measured and informative. I appreciate your insight.
You can also use the tool for . . . scrubbing! A sanding pad can also more or less hold onto Scotchbrite cut to fit. We have a bathtub that collects , probably the interaction of soap and hard water, but not easy to clean. DeWalt cordless + sanding pad + Scotchbrite + Scrubbing Bubbles is a bit messy, but cleans way easier than an old man's elbow grease. As a saw, it's the least likely to amputate something you want to keep. 😊
I thought of this at one of my old jobs went out bought an air powered one brought my compressor and after gallons of degreaser the surfaces looked brand new
The Fein O/C tools were well known by wooden boaters long before carpenters. Removing caulk between hull planks is especially tedious. Also the Fein manufacturer has shaped sanding pads for profiles like shiplap siding (also called German siding). And one last use: I was insulating a hot tub with 2" rigid foam, cutting foam that thick with a knife is difficult and a saw produces a cloud of static-laden plastic particle dust! The round blade zips right thru rigid foam with ease of control and a minimum of plastic dust.
OMG thank you! Ive been looking for this answer in forums all day and yours is the first anecdotal evidence of the blade working well for the purpose. Much appreciated!
I don't own this tool but stayed for the interesting delivery and versatility of this tool. Nice job.
Nothing better than the sander attachment for preparing an old wooden window for repainting, or fixing up the edges of old wood siding.
I'd love to see a buyer's guide to oscillating tools :)
check the channel "Project Farm", he has a great testing video
There are a ton of them out there. I know The Honest Carpenter did one a while back
Personally I’ve just always removed the blade when putting mine away. Only takes a second, and also makes it take up less room in the toolbox. Just for the record I do the same with my jigsaw and reciprocating saw as well. It just always made sense to me.
Mine comes in a small plastic case with all the accessories, so I also store the tool disassembled because it won't fit otherwise. But I'll probably get another MAKPAC in the futute, for more different sawblades and sandpapers along with the tool, sacrificing the snug fit of the original case 😅
Drills, rotary tools, routers, bits are removed.
I thought the same thing - um, take it off before bagging it?
Not sure I'd ever store it with the blade on, even backwards. Enough rattling in a bag in the truck and it can still cut through your circ saw cord or whatever else you have in the same bag.
@@JV-pu8kx 10000%. If you store or transport tools with bits, blades, end mills, etc. you are stupid and lazy or you have more money than sense and like buying new tooling, bags and replacing damaged tools.
Not sure why ANYONE would store a tool with a bit, blade, endmill, etc. still installed. That's just insane to me.
Agreed
I remove the bits/discs etc from all of my battery tools, and i stress it to my apprentices to do the same.
Only takes one speed bumpnamd you've damaged a bit or cutter
The brazed carbide tipped, off brand blades are actually wicked good for metal cutoff and inexpensive compared to a Dremel or Bosch or Milwaukee. I do lots of metal - 304 stainless, 1018 steel, etc. and even though they are off brand (like harbor freight or Bauer) they still work wicked well.
Usually faster for doing cutoffs than my bandsaw and great because you don't have to completely disassemble things in order to get it to the bandsaw or mill.
Also, take off the blade to store it?
You're right! U expanded my consideration of tooth size, blade material, & oscillation speed.
👍
I'm probably the only one that doesn't have this tool yet. I have been wanting one for a couple months now. After this very well explained video, I'm definitely getting one this week. Thanks for the GREAT VID!
you never fail to take any subject and make entertaining, educational and fun videos. thank you the quality of content. you never disappoint.
The other thing I've learned about these is that the blades are often not very good about clearing chips due to the short strokes. If you have to make a narrow cut, they cut much faster if you move the saw side to side gently as you cut.
You said short stroke.
@@bluecar5556 Yes, but variety is the spice of life...
Good tips, that has always been my number 1 complaint about this tool, it seems like my blades are done after a single cut, and it got ridiculous how fast I was going through expensive blades. I'll try out some of these tips to make my blades last longer.
There’s dozens of sellers on Amazon that sells the blades for $1 per blade or less. Well worth it to buy the multipacks.
Damn. I didn't think og that. Oh and I bought mine on a extension cord. Wish I hadn"t.
Love all my Makita tools, multi tool is definitely my favorite, the blade exchange is flawless..
Abrasive blades are also perfect for plaster walls. They won't crack the walls and they don't create as much dust as a Dremel or angle grinder.
The main way I use sanding attachments is for enlarging holes in walls. When you need to take off
I just recently bought the makita cordless. For a large project.
I stumbled on to this video...glad I did...all the things Not to do, I did.
It cost me a blade, fuel and time.
Since then I have purchased a few more different types of blades.
And with the links..odds are I'll be getting a set.
Well, you just taught me a lot of new uses for a tool I’ve been using for years. Thank you 👍🇦🇺