Best Oscillating Multi-Tool? FLEX vs Milwaukee, DeWalt, Makita, Ryobi, Ridgid, Hart, Metabo, Warrior
HTML-код
- Опубликовано: 19 май 2024
- Oscillating Multi-Tool Brands: FLEX, Milwaukee, Ryobi, DeWalt, Makita, Ridgid, Hart, Metabo, Warrior, Bosch. Oscillating Multitools tested for cutting speed through wood, PVC, and nails. Oscillating tools also compared for noise, vibration and ergonomics. My goal is to always provide accurate and honest test results by avoiding outside pressure from manufacturers. To do this, I always buy all of the products that I test along with the test equipment and supplies used for the testing. So, thank you very much for helping me achieve this goal by your support of the channel.
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: project-farm.com/
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Milwaukee: amzn.to/3LdQaXa
Ryobi: amzn.to/3tQTDEW
Metabo: amzn.to/3qRkHlx
DeWalt: amzn.to/3AkKK7K
Makita: amzn.to/352EYfh
Bosch: amzn.to/3KwIhvz
Flex: Available at Lowes
Warrior: Available at Harbor Freight
Hart: Available at Walmart
Ridgid: Available at Home Depot
VM-6360 Vibration Meter: amzn.to/3rL475U
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC 
Хобби
![Minecraft but Players Can Upgrade [FULL MOVIE]](http://i.ytimg.com/vi/QRRgLJs4ZPk/mqdefault.jpg)
I loved the new summary section at the end showing the final results based on each different category. An excellent addition to your already great video format.
Beat me to the punch, I was going to say the same thing.
100% It really makes a difference
Definitely something that really helps summarize each and every one of them. Hope it continues!
Yep. Definitely a great addition. Beat me to the punch on it as well.
Agree!
You know what's more impressive than the tests you do? The testing jigs that you design! Great video! A++
Thank you very much!
Thats what I call the best way to test a tool. He is the best in testing things out.
Mr. project farm can you please do a test for best sump pump?
Facts
Agreed
I work at home depot and when someone ask for the best tools, I always refer to your videos.
So people can make up there mind while having fun.
I appreciate that!
I love when he looks at the manufacturer’s claims and says “we are gonna test that” !! Love your videos 😊👍🏻 keep up the good work
Thanks, will do!
"I didn't know I needed an oscillating tool until I had one." I think a lot of people agree with you. That's why we love your channel. Keep up the awesome reviews.
i didn’t know i don’t need wife till i get one!!😜
For sure! I bought a Dewalt just to have one. It sat for 6 months. Then I needed to cut trim around doors to install walking floors. I thought, "OMG where have you been my whole life!"
Thank you!!
@@got1978 If you wish your manhood was imaginary then you need a wife.
@@jimjones1678 what does this even mean?
Definitely an improvement seeing each brand with their respective charts circled at the end. Keep up the good work
Yeah the overview is helped a lot
Ditto
I love your energy in your videos. It feels like a sporting event and I always find myself rooting for a brand or two.
Vibration on these tools makes a huge difference to health and safety. Thank you for making that an important part of the test.
You are welcome!
I have a Fein (older one) and a couple of the cheap harbor freight for cutting masonry etc. Both are corded. I hate the HF because of vibration, your hands will be tingling after a short time. The Fein can be used for much longer.
I will be buying the Milwaukee Fuel when it goes on sale.
The speed control on the DeWalt is an absolutely awesome feature. Had that unit for a few years and it's still going strong.
Great point! Thank you
I will say that the dewalt oscillating tool I got about a year ago does not have the speed control on it.. funny because that's the one thing I had wished it had
@@woodcrafter7361 there are two types lol one with trigger control one pike here
Agree. Have the same unit and it's a beast.
Can vouch for this, been using a dewalt brushed multitool for almost 5 years and it still works like new, I'd take the dewalt trigger over more cutting speed any day
There is a huge difrence in price for auto darkening welding helmets ($30 to over $500) but they all clame to meet the same specifications (and many seem to be from the same manufacturer with difrent prices and names slapped on them). Would love to see you test some of those.
I agree! That's a brilliant suggestion for a PF test!
Especially with everyone now able to get sub-$100 IGBT welders!
Agreed!
Good idea! My dad-in-law needed a new autodimming panel for his Kemppi helmet. The genuine part was in the range of 150 euros. That was just ridiculous to me, so instead I got him two replacements from China for ten euros or so. He said they were better than the original and had adjustment knobs as well.
Though nowadays I try to avoid purchasing from China. The Uighur detention camp stuff going on is sickening. Not Holocaust level, I think, but really, really horrible.
I've been looking into buying a welder, so this suggestion gets an enthusiastic 👍👍👍from me! 😁
You can do a whole series on welding -- auto-darkening helmets, inexpensive stick (SMAW) welders, inexpensive MIG (GMAW) welders (with gas), inexpensive flux-cored (FCAW) welders (no gas), welding tables, as well as all the equipment needed for basic metal fabrication like band saws, vertical belt sanders, angle grinders, etc.
I love your videos Todd! As someone who has grown up using tools from time to time, I very much appreciate your analysis of their capabilities and fairness in testing. I'm 18 and reaching a point of starting to buy my own tools and items and you will undoubtedly be one of my best resources for deciding which brands to buy and rely on!
Thank you!
Your summary is superb! Every tool I consider for my workshop is vetted/tested and appreciated by you ... or it simply does not get bought. Thank you for your integrity and brilliant test designs.
Thanks!
The vibration force measurement tool was a nice touch. Also, I really appreciated the summary/wrap-up at the end, quickly comparing each one. Keep up the good work, Todd! You remain undefeated!😁
Thanks, will do!
I agree, very good. I remember a couple years back, working in contruction and being handed the makita to remove excess concrete off of finished walls.
Terrible job, its true you need two hands and the vibration makes your hands hurt quickly.
I have the DeWalt and thought it was a little vibey but I can't imagine using those others! Milwaukee seems the best choice for a professional using it regularly.
It would be interesting to also test vibration while it has a blade on, and again while cutting.
@@RandomShart I have the DeWalt as well and without any basis for comparison, it seemed 'okay' to me, but after watching this video I appreciate it a bit more.
It's absolutely impressive what you go through to ensure each and every test you do has zero variables to change the results, this channel has come so far over the years! Amazing content!!
Thank you!
I love your videos! You save all of us time, money, and frustration dealing with finding the best tools. After finding your channel I never buy anything without seeing your reviews first! You’re my hero!
Thanks!
I appreciate all of your tests. These power tool prices have just gotten to be wicked... Batteries, chargers, dang... So, testing like yours provides so much information. Please keep it going!!!
Thanks, will do!
Oscillating tools (or renovators as I’ve heard a lot of people call them) have been a a huge game changer for cutting out cupboard power points and and large recessed lights. I really liked the summary of all the tools performance/results at the end of the video it’s a great addition.
Thank you!
Easily my favorite tool since I bought one. I've used it all over the place, and for tons of different things.
I just love the test rigs you build! Probably as close to an accurate real world test as you can get!
I am glad all the tests are viewer suggested, and that you don't take any sponsored items for tests.
Thanks for all the hard work you do to help us decide which products are best for us to buy.
Thanks and you are welcome!
@@ProjectFarm curious as to why the Fien wasn't included in the field. I've had the tool close to 15 yrs, used frequently, not so much as a hucup. Would put that German made rig up against any tested here - it's largely a matter of rpm's & the correct blade(s) though I believe. Thnx.
I’ve been watching your videos a lot the past couple of days. I’ve been considering buying some cordless tools and because of your videos I’m seeing a pattern. I’m thinking I’ll spend a bit more for some Milwaukee gear. It really seems like other companies could come out on top if they upped their game a bit. This research you’re doing is very helpful to those of us looking. Once we purchase one cordless tool it only makes sense to stick with that brand. I can’t afford a barn full of different chargers and batteries, so the one brand commitment is very real. Thank you so very much for what you do.
Michael Long
You could do a video comparing blade attachments for oscillating multi-tools. I've definitely had a range of experiences with them (rust/corrosion, lost teeth, bad attaching mechanisms, etc.).
I’ve used the Dewalt and the Milwaukee quite a bit on many, many jobs. I think the biggest thing you mentioned but didn’t emphasize is the variable speed trigger on the Dewalt, it really allows for more accurate cut placement when starting in the middle of something and allows you to slow down if you are cutting to a line. The blade change on the Dewalt is also infinitely faster. I also like that the Dewalt is able to stand on its own with the battery in, this is especially helpful when the blade is burning hot and you don’t want to put it on something that will get burned from the heat of the blade. I’ve had my Dewalt for about 6 years now and use it all the time.
Great points!
The thing I don’t like about is that you can’t just turn it on and use it like the Milwaukee. So it can be harder to get the tool in to tough to reach areas and tight spaces. Also doing flush cuts high above your head are difficult while maintaining a consistent speed on the trigger.
@@wittwer427 I hear what you’re saying but the DeWalt has a trigger lock. Squeeze the trigger, push the button, and it runs wide open.
I cant figure out how milwaukee even thought of such a bad blade change system. Dewalts destroys it. Even with the speed difference I'd still pick the dewalt just for that. It's It's tool where switching blades happens often so it's important
@@wittwer427 As said previously, there is a built in trigger lock so you can turn on and use without squeezing trigger.
I agree the angle isn’t as steep as Milwaukee but for most jobs I’ll take the stand up feature over extreme angle of blade.
Higher degree of oscillation definitely helps to make faster cuts, but when plunge cutting into a finished surface, it can works against you. I personally own the Milwaukee m12 multi and I find when trying to make a precise plunge cut into a finished surface (not necessarily a painted material, just a cut into wood that will be seen forever) it is difficult to keep the blade from running or chipping out material when starting the cut. I find a lower degree of oscillation creates a cleaner cut when starting in this application. I get that not everyone uses a multi tool in this fashion, but just figured I’d give some input. Thank you for the great video!
You are welcome! Thanks for sharing.
Does starting with the lower speeds help, or just the same ? I only have the corded Fein brand , one speed but it's a beast.
I’ve noticed the same with my Milwaukee as well. I think I saw a similar test video where they noticed the Milwaukee was so over the top you essentially can’t cut delicate stuff with it. It is one of those things where you start to wonder why you are using that tool for cutting tons of nails ...
Try rouded blade instaed of square one
Try using the bosch curved blades. They're expensive, but it's easier to make those precise cuts with them. The milwaukee blades are by far the fastest but harder to be precise.
Thanks again for all your great work. I ended up with the milwaukee due to your findings. You have saved me many potential headaches over the years so again thank you for all your hard work
You are welcome! Glad to hear!
I love the scientific, complete, and concise way you review and test these. I'll be looking for your reviews before buying anything from now on. Thank you for all your hard work.
Thanks and you are welcome!
When I bought my first Oscillating tool; there weren’t many brands making them. I’m surprised that you didn’t include the grandfather of the tool; a Fein Multimaster. That was THE best money at that time spent on a tool when I was installing kitchens. There just wasn’t anything like it. It would have been nice to see how it would have compared to the others. I sold my corded Multimaster to purchase the Milwaukee cordless. Works great!
I would have like to see the Fein included as well especially since they basically invented the segment.
@@watsonlr I agree. The majority of other brands appeared after the Fein patent expired.
@@watsonlr in finland we call oscillating tool pretty much just "feini"
The fein was the first one I ever purchased but didn't keep it for long. $450 for the tool back then just didnt sit well. Milwaukee seems to be my go to now
Fein tools are usually prohibitively expensive and not really marketed to DIY/hobbyists.
The Dewalt blade change system is what wins things for me, being able to quickly set the blade/attachment at a different angle or easily switch when you’re in a tight spot really makes a big difference
I have all Milwaukee tools and I’m not a dewalt fan but I am a huge fan of the dewalt with the quick change. I would have bought it over the Milwaukee for that reason alone but I didn’t want to deal with another type of battery and charger considering I have several Milwaukee batteries already.
Agreed. I have the Dewalt. I wish it had a bigger oscillation angle but other than that it is nearly perfect. It takes longer to make cuts than I like but the super quick blade change system along with being 1/2 price of the Milwaukee makes it my choice.
I bought and then returned the Milwaukee M12. The blade change doesn’t involve tools but having to unscrew it a few times and then rotate the blade and then screw it back and then tighten it was really annoying.
I also have an older Fein corded tool that predates their anti vibration system. The M12 tool’s vibration is so much better that I am going to have to buy another tool if I am going to use the tool a lot.
Totally agreed. If you factor blade changing time into the equation, dewalt would win the contest at least for me
@@gf2e Everyone on this little thread saying that you have to unscrew the Milwaukee or the Ryobi it’s not true 9 out of 10 osculating blades you buy have an opening in the back that bolt isn’t Intended to come all the way out he was using a star lock blade design because it was universal with all the tools. Majority of osculating or multi tool blades are not a star lock design. What that Dewalt lacks in performance and speed you’re not making up in blade change. The cutting speed Produces less tear out a cleaner cut and is more precise with less effort. If you had to use this tool professionally you know that would not top your list of priorities.
Man, your videos are always the best. Really love that I can go through almost all of your videos and the format is the same. Super easy to understand and to the point.
Thanks so much!
I'm a surprised at Milwaukee's performance overall throughout these brand test videos. The videos are great, more exhaustive and rigorous testing than you see pretty much anywhere nowadays! Very appreciative!
Thanks!
Really liked how you gave us your opinion on the separate tools at the end of the video. Seeing the data proving what they are capable of is awesome, but hearing the thoughts of the person who was able to handle the product is equally important info. Almost tired of saying this, but.... great video! Again
Thanks for taking the time to test all these products. The compare chart is very helpful. I’ve got my mind made up, thanks to your amazing guide. Excellent 😊😊
Thanks and you are welcome!
Thank you. You deserve a lot of respect because you care about the way you work and your clarity and professionalism deserve goodness. The content is very good and you deserve to subscribeThanks!
You are welcome! Thanks for supporting the channel! I really appreciate it!
I’ve been in the construction business for over three decades. My go to oscillating tool is my M12 by Milwaukee. It’s slightly lacks power but more than makes up for it with its narrow footprint, weight and runtime. On a four amp hour battery, I get most of the day of general use out of it. Great reliable tool.
I got the m12 for same reason. Was hoping to would test the m12 version
I was wondering if there was an m12 version.
I have the m12 fuel, it'd beat all the other 18+ volts tools shown. It's a great light tool, my go to
Thanks for the suggestion.
My go to is also the Milwaukee M12. Very impressive tool
thanks for theses videos, i work at my local home depot, I'm the tools department full time employee. your videos are so useful for me and my team. they are way better than what we get from the home depot training. i also suggest your channel to a lot of my customers.
keep them coming! :)
Awesome, thank you!
That's cool man. I'd love to have someone like you at my local HD that cares enough to inform someone with questions that you have researched/happen to know. Kudos.
I run the tools department at a Lowe's, and I do the same.
@@mobrien7211 I hope so. I frequent HD 'cause of the tools I've subscribed to, but I find myself at other places and sincerely appreciate people who try to help.
@@mobrien7211 sharing the love, sharing the knowledge ;)
Great presentation. I like your fast pace, no bs videos. Bought the flex after watching this and other reviews. your pulley setup is a fantastic way to learn real world results. Thanks.
Thanks and you are welcome!
Just picked up another subscriber. Can imagine the time you spent making this video. Thank you.
You are welcome! Thanks for watching and subscribing!
Great review! The blade change system deserved a category of its own. I was an early adopter and longtime user of the tool. I purchased a Fein Multitool when it was the only tool of its kind. It is still going strong but, I am ready to exchange it for something with a tool-less blade change. Not only tool-less but with no small parts to remove, handle or lose.
Thanks! Thanks for sharing.
Get the Dewalt, it's amazing! You can get a deal on them often too
@@thedarkness5133 right? After using the Dewalt for a few years the other blade change systems seem way too complicated!
@@ProjectFarm I really liked the way you did the summary on this video. Keep up the good work.
Same. Got an Fein 600€ battery one and a 105€ Makita one body 18v. I only use the makita.
Todd - I loved the summary at the end. This is the kind of thing I've been waiting years for you to add to your reviews. Really solid breakdowns on why you would or wouldn't want a given tool. Well done!
Thanks and you are welcome!
I like the added recap at the end, good feature. Really brings it all together.
Thank you very much!
Such a good channel, such good videos!! Love your enthusiasm too! Please continue your summary section at the end, reviewing each tool using the various criteria. Keep up the awesome work!
Thanks and you are welcome! Thanks, will do!
Can’t be an oscillating tool lineup without Fein (they invented this class of tool and still make the best ones in my opinion), but great video nonetheless.
I thought Dremel did 🤔
Thanks!
@@jasonspellich2440 Nope, Fein in 1967 as the plaster cast saw.
@@jasonspellich2440 Fein had the original patent on them.
Cool
I'd call the ryobi the best for the price, it performed quite well all around compared to other brands and was more affordable than those that outperformed it
And the fact that they don't change their battery configuration every few years is a huge plus for me. I've owned Craftsman (Sears) and Porter Cable multi tool kits in the past and ended up with perfectly good but unusable tools because I could no longer purchase batteries that fit and rebuilding those batteries wasn't cost efficient. I have no complaints about the Ryobi brand.
I've had a line of Ryobi tools over the past couple years and they've been so good and consistent. For the price and quality, you can't beat it!
Definitely love the new summary section. Hits home the key factors for each brand, esp in combination of the chart.
Thanks!
I already have 2 of these tools. I just think you deserve the views for this level of testing. It's really quality stuff man.
Thanks!
I've got a Fein Multimaster. They are rumored to be "the best", at least when I bought mine, so it would have been nice to see it here to compare if that is true. If you test oscillating tools again and can include one, that would be good. Still an interesting comparison, thank you.
Can’t believe the Fein isn’t included!!!
Is there a cordless Fien? if not that may be why it wasn't included.
@@firebladex8586 There is a cordless Fein... look at some of the videos of its "performance," it's lackluster to say the least. Plus what other tool is going to use that proprietary battery?
@@firebladex8586 Fein has a 18v and a 12v version, imo still the best in the market
@TheCheesePlease nobody asked you for wrong answers only! Fein invented this shit and all of these other brands are simply copies. Come back to reality when you can pal
I appreciate the summary at the end. It makes it easy to compare all the stats quickly.
Have you considered putting everything into one chart? Color coding best and worst in each category?
Love these comparisons. Always a fair test and accurate results. Brilliantly put together
Oh and great commentary as well
Thanks so much!
Awesome video mate! Thanks for taking your time and effort to test these oscillating tools.
Very handy before making any purchase.
Thanks and you are welcome!
Wow I really enjoyed the summary of all the brands at the end. A short and quick addition but I hope you continue to build this into your reviews! Awesome work!!
Thanks!
Would love to see a comparison of sub $50 digital multimeters. Thanks for all you do!
True :)
Thank you!
MAKE IT a double test: one for basic Multimeters, and another for hook type Ammeters-Multimeters... PLEASE!!!
@@ProjectFarmcordless rotary hammer
I make all my tool purchases based on your reviews. They’re awesome and love your creative problem solving.
Thanks for sharing.
Love your videos... no BS, very professional, and gets to the point. And... your sound levels are great.
Thanks!
I have that M18 Milwaukee unit, but for heavy jobs I have a Fein, which is the original. It is spectacular.
Great feedback. Thank you
Yeah, the fein is a big omission in this category
Full disclosure - I should have mentioned that the Fein is a corded, not cordless. When I have a big job, I get an extension cord and use that one. The blade change is effortless and it has horsepower for days. Cuts like lightning. The Milwaukee is good, sure, but honestly I bought it just for small jobs where I didn't want to have to get out an extension cord.
@@WalterGalindo It's the OG. You can *feel* the horsepower in it. You start that thing up in mid-air and you have to react against the rotation of the motor. It's crazy, but it's a really *good* kind of crazy when you have a bunch of flooring to trim or some other nightmare to deal with. Pricey, though. Worth it. Totally worth it.
@@mikegraham7078 I’m pretty sure fein has a cordless solution, will have to check
I love the summary in this video! Please do this from now on with all videos! It's always a bit of a pain to scroll back the whole video and see which brand does what best.
As always, great job with your testing!
On Sundays it always my break from the household and get a smoke so I can watch Project Farm.
Thank you so much for making this video! I read the reviews on the harbor freight and Walmart corded ones and the majority of them said the tool broke right away and the Walmart one also said the metal cutting Attachment broke right away as well.
You are welcome! Thanks for the feedback.
Brother I'm sure you've heard it many times before but I really love the way you test products! Please keep up the good work and I look forward to all your future videos!
Thanks, will do!
I love the recap of all the brands at the end of this video. Shows pro/cons very clearly. Would be a great addition to include in all your videos
One of the best tools to have. Massive thanks Todd for all your dedicated time and effort in these tests. Again, Best Channel on the Tube. 3M Subs you deserve!!
Kudos to you for doing up to the point easy to follow, practical and scientific experiments, that are unbiased.
Thanks!
The summary at the end was awesome. Please keep doing that!
Thanks, will do!
Great test. In the EU, the Fein brand is one of the most renowned when it comes to oscillating multi tools. I'd love to see how it matches up with some of the best here if you ever decide to do a follow-up.
Thanks! Thanks for the request.
Yes, the Fein is the original so it should have been tested. I own a Festool so I would have liked to see that included as well. Both are pretty expensive so maybe that’s why they weren’t included.
@@lylewaters6161 i have worked for fein, the fein multimaster is awesome. I bought one when i worked there.
The festool is made by fein 😉
So it should be same as good as the fein.
Festool also buys their angle grinders from fein.
@@Johannesbeere21 yeah I know Fein makes the Festool. It seems like Festool has some unique accessories though that no other manufacturer has. Don’t know if it’s worth the extra $$$ but I got sucked in.
I believe Fein was the original.
I love how tools and sports team bring out the "homer" in everyone. I was pulling for DeWalt throughout the testing. But it looks like Team Red gets the trophy this time around. 🤣 And like Todd, I laughed at the Metabo synopsis. "Heavy, loud and cuts very slow" OUCH. LOL
Thanks for the feedback.
Hey… what’s wrong with bringing out the “Homer”
Team red better have won for double the cost. Can't be mad at dewalt's performance for saving a Benjamin and change.
@@pseudofiev4707 Well, there's always the salary cap to worry about! DeWalt had to sign the new battery platform and now they're over the cap 🤣
@@hansangb I definitely don't follow this stuff enough to know what you mean by "salary cap".
I love the summary at the end.
I need one of these saws, and I came here to find out more.
Thanks! Thanks for sharing.
Great video! I really liked the summary at the end! Keep up the good work 👍👍
Thanks, will do!
Fantastic work, very impressed by your scientific/engineering approach to tool evaluation. I would consider you the one honest source for tool reviews as your testing really hits on what is important for a tool buyer/user
Thank you very much!
Wow, that is an extremely well done review! Thank you so much. No bs, just tons of info in a few minutes, with a positive attitude and correct comparisons. Absolutely flawless =)
Thanks so much!
I desagree you use to 2.5 amp hour battery on the flex and compared it against Milwaukee with a five amp hour battery. Results are skewed use the same power to battery Comparison And the flex wins every time
I like the summary section at the end. Please keep this for your other tests.
Thanks for the summary tool!
I really love your videos. I used a cheap harbor freight 120V oscillating tool for a few years, then got a Ryobi 18V, which was much better and I didn't realize the value of this tool until I had one that just performed better. Unfortunately it burned up during a big remodel job, and I was going to replace it with the same model when I saw a Rockwell corded multi-tool, and it gave me a similar bump in performance. With a larger range of motion and more power, it moves through material with very little effort.
Thank you for the quality videos, which I frequently refer to when researching the various brands.
What are you using it for? I've had mine for a couple years and only used it a handful of times. Definitely handy to have but not a daily use tool for me.
great video, I have a couple of Ryobi tools that use their One battery system and I'm very happy with them.
As for a product suggestion, I'm trying to strip the paint off a bike frame and I've struggled to find an efficient paint stripping gell/spray and it's been a lot harder than I had expected. I'd love to see a shootout of different paint strippers to see if there's a best one for my future projects. Thanks!
whaaat didn't expect to see you here!
I'd love to see this too. I'd imagine methyl ethyl ketone would be pretty good, with steel wool as an abrasive
I'm interested too as I'm restoring snowblowers with decades of added paint.
@@picax8398 haha Project Farm is one of my fave channels, I look forward to it every week
Thank California. I've noticed a lot of the good paint strippers have been discontinued or reformulated to be more tree-hugger friendly (in other words, perform a whole lot worse) so I'd consider that some welcome information as well! Good idea 👍
The Makita XMT04ZB is a brushless unit that’s much different than the brushed unit. I have Makita tools, and the deference is noticeable. Thanks for a great and unbiased review as always.
i've used the brushed unit, it's such hot garbage.
Yea, i also missed the makita BL version, because I am on the verge to buy it.
On it’s highest speed it tends to cook the cutting tip.
@@dorhocyn3 that's normal for any tool and friction. use the correct blade for the correct material, apply the correct pressure with the correct vibration setting, and if all else fails apply some cutting lubricant to keep things cool :)
Quickly becoming my favorite channel on YT 👍
Thanks!
Summary section is next level! Love it!
Thanks!
Very happy to see FLEX in the lineup now, looking forward to seeing how they do in further tests of core tools like the Hammer Drill, Impact, Saw, etc
Thanks!
Same
Can’t wait!
I love seeing new test rigs! They're so efficient and well thought out!
Having other tools in the 18v Makita platform, I was leaning toward purchasing one of their multi-tools. I'm glad I saw your video first!
Thanks!
AVOID THEIR lower end models... Both Bosch and Makita have extended their tool lines toward the CHEAP end, so that their lowest price models are below the expected-for-the-name performance... (they are trying to catch the unsuspecting buyer with low priced models that fall short, but sell only because of the namebrand).
I love you’re individual tool summary at the end!
Thanks!
Always look forward to EVERY video. I don’t think there is another channel that compares to quality, or watchability of this content !!
Thank you very much!
The oscillator tool is one of those tools that you may rarely use, but when you do need it you'll be happy you have one. I purchased a Dewalt oscillator with a battery and charger for $99
Thank you for the Project Farm laboratory testing.
That's crazy cheap. Down here in New Zealand the DeWalt 18V kit with 4Ahr battery and charger is over NZ$600! (US$400)
@@DiscoFang bummer. Builders aren't even "essential" workers there. Crazy times we're living in.
Love the summary at the end. Keep up the great work
Thanks, will do!
Love the summary at the end. Would love to see this get added to future videos
Thanks and thanks for the suggestion.
I just bought one, I never knew about them before that. They really are so good.
What a great tool! I use mine several times each week.
Excellent video! That recap at the end was amazing! I know it's asking for more work, but including those at the end will really help a viewer understand where a specific tools stand up against the competitors across all tests.
Thanks! Thanks for the feedback.
Thanks! Great breakdowns. And THANK YOU for the graphs! And summary's! Great information. Great standardized tests!
Thank you very much!
I love that opening statement! I didn't know I needed one until I had one either!
Thanks!
Good review, but Fein is generally regarded as the best oscillating tool, and Porter Cable was missing as well.
Thank you for the feedback!
Yes, fein created it and had the patent for 20 years
Agreed,, .I saw a infomercial 15 years ago while I was laid up in traction so i bought it.Loved it,then they came out with the toolless blade change so I got that one and used the first one for sanding only.Then the patent ran out or something and everyone started making them and the price dropped .Now I just use the Dewalt and the fein sits on a shelf.
Excellent content as usual!
I, too, expected the Milwaukee to do well, but those results were particularly impressive!
Thanks for making my Sunday! 😎
I love your fast to the point no waffle, but very scientific & informative reviews.
Thanks!
I've been searching for a video like this, well done sir as this made my decision so much easier. Here I come Milwaukee...
Awesome! Thank you!
I love the new overview of all the tools at the end! Somehow you keep improving your videos.
Thank you very much!
Todd, you are a Rockstar among Rockstars! Thank you for your in depth testing of products. I really like the new summary at the end where you discuss the strengths and weaknesses of each product along with your winners. There seems to be a common theme in your testing of tools. It is hard to beat Milwaukee. Yes, you pay for it, but it seems like it is number 1 or 2 in every test, no matter which product.
Thanks!
Problem with Milwaukee is that they are so good that people abuse the crap out of em, making them have a not good reputation because they break after six months
My pet peeve with oscillating saws is cumbersome blade change out. I have an old Rockwell and it is downright a pain in the derrière to change blades. When I saw the Dewalt blade changeout mechanism, that sold me. I’m a happy camper now.
Another great review. I decided to go with the Dewalt for two reasons: (1) ease and speed of blade changing and (2) I already have a stash of Dewalt batteries. 😉
Thanks! Thanks for sharing.
I love my DeWalt so much, it's easily my favorite tool although, now having it owned for 4 years now, it looks incredibly ratty. As a cutting tool, it's a very safe tool for working around difficult areas or rotten wood that you're not quite sure what's under it. It's also the only tool I know of that can mate two surfaces perfectly together seamlessly. Simply press both sides together and let the blade remove the high spots. It's like magic and I use that a LOT.
Been using a friend's Dewalt, love the size and ease of blade changing. But bought a Ryobi because I already have their batteries and they don't change the style of their batteries like other mfgs.
As an owner of the DeWalt, I’m not sure I’d characterize it as easy to change as it takes grip strength, which sometimes at the end of the day, I lack.
Also, for whatever reason, it isn’t good at cutting holes with a 1 gang rectangular drywall saw. I actually keep another oscillating tool around just for cutting perfect box openings in drywall.
I’m a massive Dewalt “fanboy” and as always, was very happy to see its performance on par with the quality I’ve come to know and trust.
I am not a Ryobi fan by any means, but it's definitely the most bang for your buck in this instance. Awesome video as usual, PF!
i honestly wasnt a ryobi fan until i used their drills for years in a super heavy construction environment, im talking just filled with masonry dust constantly for years, they always worked and always had enough power to do any job i needed them too. theyve surprised me and these videos tend to show how capable ryobi tools are
@@ryangross5446, I am a professional cabinet maker, and I pretty well only use Dewalt battery tools, but I have to admit that Ryobi has impressed me multiple times for the price point.
I've had a lot of multi tools over the years and you absolutely can't beat the dewalt with a battery, bag, and charger for $100. Lately I've settled on dewalt 20v and the M12 fuel. I prefer the dewalt for accuracy because of the variable speed trigger and the M12 fuel for demolition. The M12 is faster and it's way better with vibration control. I hate the makita, it's a brick. So many of these blade changes are so cumbersome they don't make any sense to me. The dewalt is the best quick change.
Thanks for the feedback.
Cool, these tests showed otherwise
You are useful beyond any imagination. Your videos are so helpful. I go to your videos before I buy anything! Lol, thankyou so much for everything!
Thanks and you are welcome!
You do professional tests, it's very helpful, I love it.
Thanks!
Thank you X 1000! I get horrible pain in my hands after using my Harbor Freight oscillating tool for even 15 minutes so the info on the vibration was truly invaluable. 😘
Thanks!
Ryobi seems to be a solid product ecosystem to get into with a good value to performance ratio. For most people's uses they would be perfectly fine.
Thanks for the feddback.
I will say if you look at reviews and stuff like this, Ryobi is definitely one of the best weekend warrior brands. I'm personally moving to DeWalt for a lot of things, but honestly my Ryobi tools have yet to truly disappoint me.
Ryobi by far has the best variety of cool gadgets that few other companies offer.
I got into the M18 Fuel lineup for the tougher stuff, but still invest in my ryobi kit for the neat stuff at half the price of the Milwaukee equivalent
As mostly armature, Ryobi One Plus has been solid stuff for me for the past half decade or so. I do light repairs and maintenance on rental properties, and I haven't run into any issue with my Ryobi stuff. Plus it has a respectable warranty despite it's low price compared to other big brands. I haven't had to use the warranty yet.
@@aethertech when the 1/4 impact came out the old blue model. I bought and used it on the job site. It kept right up with the Makita. Let everyone use it. Used on the job for two months. It survived.
I still have it and still works fine.
But I did upgrade to Ryobi brushless "higher end"
Great video good sir!
I own two extremes when it comes to these oscillating tools, first up is the corded Chicago electric from harbor freight.
I used the tool quite a bit and found it to be quite a value at $19.99 (normally $29). It was versatile and neat.
Then when I chose to invest in Milwaukee, I cried a little bit but ended up getting the Milwaukee, despite knowing the cost. In part because I saw you using what I believe is the non fuel version in your oscillating tool blade test.
I have not regretted my purchase whatsoever and I've used the tool in a multitude of situations under different circumstances, usually where a sawsall would be too aggressive or large for the job. And every time I'm impressed and pleased with the versatility and power brought to the table.
It is however quite long for an oscillating tool and the speed adjusting dial is rather poorly placed and gets adjusted on accident quite easily.
The auto speed is surprisingly good if you don't feel like figuring out the best suited speed for the blade and material that you are cutting.
I have had quite a bit of exposure to a couple of different brands prior to making my purchase, and I must say that the DeWalt blade change is by far the nicest to work with.
I loved seeing that the Ryobi placed well considering that I actually like Ryobi as a budget friendly brand.
I also really appreciated Flex being included in this showdown.
I very strongly considered investing in Flex but at the time it was quite new and there was a certain risk factor to doing so, but everything I've seen so far has proven them to be a solid contender.
Thanks! Thanks for sharing.
Great comparison. I recently bought a Ridgid plug in tool and I love the way it cuts. Under $80 and no battery concerns for the infrequent use I will have for it.
Thanks! Thanks for the feedback.
Congratulations from Brazil. I have already purchased several products based on the results of their tests. On January 29th I will be in the United States again and I will certainly buy other things approved on this channel. Thanks.
🇧🇷🇧🇷🇧🇷😎✌🏼
Greetings and thank you!