I agree completely with your assessment of the loose stick brother, but the hyabusa is more than just the "looser feel" the way the contact hits the micro-switch is one apex point, rather than the whole piece that goes on the shaft.. i LOVE this design, but i hate the loose feel... so i switched the 1.1lb spring with a 2.0 and problem solved. Percision greater than a JLF in my opinion, with the stiffness of a JLF.
i took it from my Madcatz te2+ you can buy them online or if you get lucky find the right kind at a hardware store... search for newyorkgames.com... i'm not sure if that's the exact name but google it and you'll find it.
I was afraid to attempt replacing my buttons but this video was very helpful. It's going to be my first time replacing my buttons so thank you for your video!
I just got into my first fighting game with KI and first time using a stick. After some hours I just felt like the joystick was too loose, couldn’t get certain inputs consistent without being very dramatic. Didn’t feel precise. Attempting my first mod using a sanwa stick and this was very helpful for me cause I was nervous about opening up my only stick!
Hey, Thanks for posting this. IMO GREAT video!!! This video played automatically after I watched a video trying to explain basically the same thing. You have no idea how much appreciation I had from the second this video started. Your clarity in speaking is what all youtubers need. The video that brought me here had a guy that must have learnt English as his second language and as fine as his command of the vocabulary was... It is just so refreshing to hear someone speak clearly and decisively. #2, Great explanation and video quality. I'm expecting my first fight stick to arrive tomorrow sometime and I had so many questions about modding! I was slightly nervous... (I shouldn't have been... I've been building and maintaining computers for over 20 years... not to mention things like modding xbox's...) After seeing your video... I have very little worries about changing components if I'm not happy with them. I actually ordered this same arcade stick... (360/xb1/pc?) Fucking fantastic brother. Thanks for this video... I'll check out what else you got... and I may subscribe!
No need to remove the e-clip from the stick. I'm sure this has been pointed out, but you could have just removed the ball top and it would have been just fine.
Good video, but I dont quite get why you didnt just take the balltop off the joystick. When I was replacing the parts on my f500, I just used a flathead to keep the shaft in place and then manually unscrewed the top. Then once the top is off the sticks housing should slide clear and you wont have as many parts lying around that could get lost.
TL;DR - do not follow the part where he removed the lever, its wrong. just unscrew the ball topand 4 screws the hold the entire thing and you can remove the entire lever. So i followed your video so button replacevment was great. installing the new lever too. but i realized something crucial in the way you removed the stock lever (stick). i removed the C metal thingy, spring went wild and flew away now that lever is useless due to a missing spring. i realized you just have to unscrew the balltop - remove the 4 screws holding the entire housing - and you should be able to remove everything without the need for the stick to fall out.
Muy buen cambio amigo 👍🏼, tengo una pregunta para usted, como activo el TURBO de 5/10/ y 20 pulsaciones de mi Hori V Hayabusa para jugar Street Fighter champion edition . . .?? Saludos de Ecuador 🇪🇨🙋🏻♂️
Thank you very much For this Great Video. I was very confused what to get before. But Not I know what I have to do. Could you Tell me where i Could get this foamy anti gliding thing for the bottom side?
Destro Killsz for sure brother, def play around with different sticks and buttons. arcadeshock.com has all the extras I like so give them a look aswell.
Does anyone uses the Short Joystick Seimitsu LS-62-01 for fighting games and could tell me, if its good ? Cuz I am looking for a bit shorter one, in case of small hands.
is it Seimitsu LS-32-01 Joystick or Seimitsu LS-32-01-SC Joystick? i am looking for better stick for my hori 5.Thanks and nice vid short and simple straight to the point
1 more question is it octogonal or square? i used to play tekken 3 bck in the 90's and it fell really strange when i play with the hori pro V so im guessing when i played bck in the days it was prolly on a octogonal stick. And if you have suggestion for octogonal stick and if it fits on the hori V Thx bud im trying to come bck in the fighting game world lol
its octagonal, you can hit the QC pretty easy with it. i find myself sometimes doing them without intent but you just have to be deliberate with your inputs. great stick though. and welcome back to the fgc!
Manufacturers are always trying to cut corners while maintaining quality, so the fact that you only use 2 screws instead of 4 is concerning. How is the stick holding up today?
I was thinking of getting seimitsu ls-56-01 but its never in stock. So I was thinking of getting the seimitsu ls-62 instead. Let me know if you experienced both.
You need a specific plate for fixing the screws. Otherwise, the stick will be a bit lower than the hole and you will not be able put the cylindrical cover.
Hi I also want to mod my HRAP 4 kai... I want a sanwa joystick which one do you recommend? As there are a lot of different models and I don't know which one would fit the HRAP 4 kai... Also do I only need to buy a sanwa joystick and sanwa buttons? nothing else?
My nigga so I used the Seimitsu LS-62-01 Joystick and I love it. had an issue with one and had it replaced and it's been a dream since. and yea that's all you need.
I was a fud and didn't remove the screw under the sticker and decided to get my finger under the plate . REMOVE ALL SCREWS . I sliced my finger open by not doing this. Friendly warning
I bought the Hori real arcade pro N Hayabusa. Yeah the joystick is really loose, I need to replace joystick because I do play Tekken. Does it work the same with the Hayabusa? It's my first time modding a joy stick, I don't want to mess up.
Well you have a Hori RAP V, I have a Hori RAP N Hayabusa, is the tutorial the same despite different arcade sticks? There is not that many tutorials on the Hori RAP N Hayabusa.
yea, should work just the same. and honestly id say just try as many as you can. i enjoy my stick, but that might not be the case for you. this is really a feeling style choice. but best of luck on your search for your joystick!
ok this is the best and easiest-to-follow stick mod video I've come across, good job
DarksignHunter thanks so much! I really appreciate it
that color button is beautiful!
Thanks man, I had never modified my stick before but my cap popped off mid tournament. You saved me.
Glad to help brother! GL in your games! 👊🏽
I agree completely with your assessment of the loose stick brother, but the hyabusa is more than just the "looser feel" the way the contact hits the micro-switch is one apex point, rather than the whole piece that goes on the shaft.. i LOVE this design, but i hate the loose feel... so i switched the 1.1lb spring with a 2.0 and problem solved. Percision greater than a JLF in my opinion, with the stiffness of a JLF.
gameraxis I'll have to try that out! good advice
Where did you get the spring? The loose feel is really what's been bothering me about my RAP 4.
i took it from my Madcatz te2+ you can buy them online or if you get lucky find the right kind at a hardware store... search for newyorkgames.com... i'm not sure if that's the exact name but google it and you'll find it.
Thanks for the spring mod tip, I tried it out and have now fallen in love with the hori hayabusa
I was afraid to attempt replacing my buttons but this video was very helpful. It's going to be my first time replacing my buttons so thank you for your video!
Im glad it helps! and enjoy your new buttons!
I just got into my first fighting game with KI and first time using a stick. After some hours I just felt like the joystick was too loose, couldn’t get certain inputs consistent without being very dramatic. Didn’t feel precise. Attempting my first mod using a sanwa stick and this was very helpful for me cause I was nervous about opening up my only stick!
10/10 would recommend
At the bottom of the stick is a E style spring clip and a pair of snap ring pylers is the right tool for the job.
Thanks for making this. Exactly what I needed with a perfect explanation of how to do it.
Thomas Boehnlein glad it helped! :D
The reason why it feel loose, you have to change the spring inside the lever.
To remove that clip easily with no fear of it flying away to get lost use snap ring pliers.
Hey,
Thanks for posting this. IMO GREAT video!!!
This video played automatically after I watched a video trying to explain basically the same thing. You have no idea how much appreciation I had from the second this video started. Your clarity in speaking is what all youtubers need. The video that brought me here had a guy that must have learnt English as his second language and as fine as his command of the vocabulary was... It is just so refreshing to hear someone speak clearly and decisively.
#2, Great explanation and video quality. I'm expecting my first fight stick to arrive tomorrow sometime and I had so many questions about modding! I was slightly nervous... (I shouldn't have been... I've been building and maintaining computers for over 20 years... not to mention things like modding xbox's...) After seeing your video... I have very little worries about changing components if I'm not happy with them. I actually ordered this same arcade stick... (360/xb1/pc?) Fucking fantastic brother.
Thanks for this video... I'll check out what else you got... and I may subscribe!
I appreciate the kind words brother, i really do! Glad i can take care of some nerves for you! And yes its the same stick!
No need to remove the e-clip from the stick. I'm sure this has been pointed out, but you could have just removed the ball top and it would have been just fine.
Good video, but I dont quite get why you didnt just take the balltop off the joystick. When I was replacing the parts on my f500, I just used a flathead to keep the shaft in place and then manually unscrewed the top. Then once the top is off the sticks housing should slide clear and you wont have as many parts lying around that could get lost.
TL;DR - do not follow the part where he removed the lever, its wrong. just unscrew the ball topand 4 screws the hold the entire thing and you can remove the entire lever.
So i followed your video so button replacevment was great.
installing the new lever too.
but i realized something crucial in the way you removed the stock lever (stick).
i removed the C metal thingy, spring went wild and flew away now that lever is useless due to a missing spring.
i realized you just have to unscrew the balltop - remove the 4 screws holding the entire housing - and you should be able to remove everything without the need for the stick to fall out.
Aquabreak trurth.
Thank god I found this video. SO GLAD BECAUSE I HATE THE STICK AND THE BUTTONS.
I’m glad you found it then!!
Do you have take the little clip off? Can’t you unscrew the stick off without doin that?
I recommend unscrewing the balltop rather than taking it apart. It's much easier and faster.
you suppose to put the button in before wiring you did it the hard way
Thumbs up from France, like your style man
Thanks so much!
Muy buen cambio amigo 👍🏼, tengo una pregunta para usted, como activo el TURBO de 5/10/ y 20 pulsaciones de mi Hori V Hayabusa para jugar Street Fighter champion edition . . .?? Saludos de Ecuador 🇪🇨🙋🏻♂️
I’m trying the same stick replacement but the screws won’t go in the two middle holes
Hmm, and it’s in the right orientation?
Very useful video. Thank you!
Anytime, appreciate you watching!
Thank you very much
For this Great Video. I was very confused what to get before. But Not I know what I have to do. Could you Tell me where i Could get this foamy anti gliding thing for the bottom side?
You should definitely try the hyabusa with a 2lb or 4lb spring it transforms it completely...for £4
What is the link to 2lb spring?
I needed this video. Thank you!
Let me have the Kuro buttons!!
Oi tudo bem? Com a mesma placa do Hori consigo colocar um JLF ? Thanks
You did good man.
where's the review man? Love the vid btw
keep it up !
Had to get that extra time in on it ;) Appreciate the comment!
Dejayy3000 Love it man, just got into arcade sticks and I feel like its time to "mod" to make it my own and unique
Proper tutorial
Destro Killsz for sure brother, def play around with different sticks and buttons. arcadeshock.com has all the extras I like so give them a look aswell.
Still looking for that review 🤣
Are the Sanwa buttons less sensitive? The buttons on my RAP.V are way too sensitive. Just barely brushing them can trigger an input.
I feel like they are, they are still sensitive but you can get any buttons, I would just getting 1 of some different styles to find what you like
How did you like the ls-62? Great video, very easy to understand. I'm about to do the swap myself. Same joysticks and everything.
LOOOOOOOOVE it! def my favorite stick thus far!
Good job dude. Very informative. Thanks.
DJ Hicks thank you so much!
love the video thanks
herban123 anytime! glad you liked it!
Does anyone uses the Short Joystick Seimitsu LS-62-01 for fighting games and could tell me, if its good ? Cuz I am looking for a bit shorter one, in case of small hands.
is it Seimitsu LS-32-01 Joystick or Seimitsu LS-32-01-SC Joystick? i am looking for better stick for my hori 5.Thanks and nice vid short and simple straight to the point
its the LS 62-01. ill be making the review video soon.
1 more question is it octogonal or square? i used to play tekken 3 bck in the 90's and it fell really strange when i play with the hori pro V so im guessing when i played bck in the days it was prolly on a octogonal stick. And if you have suggestion for octogonal stick and if it fits on the hori V Thx bud im trying to come bck in the fighting game world lol
its octagonal, you can hit the QC pretty easy with it. i find myself sometimes doing them without intent but you just have to be deliberate with your inputs. great stick though. and welcome back to the fgc!
The mount plate SS or SE does it matter? and highly appreciate the time you take to answer ;)
Manufacturers are always trying to cut corners while maintaining quality, so the fact that you only use 2 screws instead of 4 is concerning. How is the stick holding up today?
Rekkabites Thirteen perfectly fine with zero issues.
I was thinking of getting seimitsu ls-56-01 but its never in stock. So I was thinking of getting the seimitsu ls-62 instead. Let me know if you experienced both.
Can you use a Batend instead of a ballend and if so what is the diameter or are they all the same size universally for any new stick?
In this arcade stick fit a IL magnetic and I.L buttons?
Thanks for the tutorial, I have a hori rap 4 Can I put it a joystick sanwa jlf-tp-8yt?
El mehdi Berkak I'm almost positive you can.
thank you :)
Hi mam how are you? Do you managed to put jlf? Thanks
You need a specific plate for fixing the screws. Otherwise, the stick will be a bit lower than the hole and you will not be able put the cylindrical cover.
Where did you get the padding that's on the bottom of the fightstick?
ElStukov it comes on the RAP V
Great video, how's that LS-62-01 working out? Any problems with rust on the bare lever?
Z H not with that but I did have an issue of the soldering. might have been a faulty one because the new one hasn't given me any issues since.
Hi I also want to mod my HRAP 4 kai... I want a sanwa joystick which one do you recommend? As there are a lot of different models and I don't know which one would fit the HRAP 4 kai... Also do I only need to buy a sanwa joystick and sanwa buttons? nothing else?
My nigga so I used the Seimitsu LS-62-01 Joystick and I love it. had an issue with one and had it replaced and it's been a dream since. and yea that's all you need.
Fits there LS-56 MS-plate?
Hey I know this is 4 years too late, but is this also applicable with hori rap N?
It should still be the same, maybe some minor differences but the overall process should be the same
@@Eldurz thanks!
Is the ball top supposed to spin
Mine did. It never really affected me too much but there were times it messed me up
@@Eldurz I'm trying to change my ball top but don't know how. I have the hori rap v
This Rap hayabusa is a square gate right off the bat correct?
Xyruz David correct!
nice hair lol also I look forward to doing this soon
What type of joystick did u use
Sorry for the late response! It’s the SEIMITSU LS-62-01
I was a fud and didn't remove the screw under the sticker and decided to get my finger under the plate . REMOVE ALL SCREWS . I sliced my finger open by not doing this. Friendly warning
Tempest Holy. Damn man. Sorry to hear that
Dejayy3000 yup... Did it this morning too. Rip me
I bought the Hori real arcade pro N Hayabusa. Yeah the joystick is really loose, I need to replace joystick because I do play Tekken. Does it work the same with the Hayabusa? It's my first time modding a joy stick, I don't want to mess up.
Im not sure what you mean. to my knowledge most if not all joysticks will work in it!
Well you have a Hori RAP V, I have a Hori RAP N Hayabusa, is the tutorial the same despite different arcade sticks? There is not that many tutorials on the Hori RAP N Hayabusa.
Sonny C it may not be exactly the same but the overall idea should be the same
what screwdriver is that? looks awesome
Josh Melendez tbh I have no idea. It was in the bottom of my drawer, but it has come in handy so much since I found it
Wheres the review
Post more fighting fame stuff
I like the music tho fam, ccccccccccccccccccccccyyyyyya
will sanwa JLF work with this
Yup!
ok thanks do i just plug in like this one?and which one would u recommend
yea, should work just the same. and honestly id say just try as many as you can. i enjoy my stick, but that might not be the case for you. this is really a feeling style choice. but best of luck on your search for your joystick!
Dejayy3000 thanks man
KappaRoss
a saw doo
I saw RAP and got fucking juiced for some nasty freestyling but I'm less hype now.
Those "new buttons" look way shittieer than the black ones you took out.
why do you look like that