Hello friends! Im start build fpv drone for UA guys. ВMaybe you'll want to try flying too and you'll like it. #fpvdronebudgetbuild #fpvdrone #howbuildfpv 0:00 Entry 0:17 Details for the construction of an FPV drone for $215. 0:58 Tools for building an FPV drone. 1:28 Frame RDQ Source One V4 5" Freestyle Frame 2:22 SpeedyBee F405 V3 BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 50A 4in1 ESC) 3:24 EMAX ECO II Series 2306 2400Kv Motor 4:33 Placing EFС+FC 5:11 I cut the wires on the motors 5:33 I'm soldering wires from motors 6:43 I solder power wires 7:03 VTX Flywoo Goku VTX625 V2 16x16/20x20/25x25 25-450mW 5.8GHz VTX - U.FL 8:00 Install flight controller SpeedyBee F405 V3 BLS 3-6S 30x30 8:15 I solder VTX to a useful controller 8:35 Camera Foxeer Razer Mini 1200TVL 4:3 PAL/NSTC CMOS FPV Camera (2.1mm) 9:05 BetaFPV ELRS Lite 2.4GHz Receiver but I will use Crossfire rx nano 10:25 Mount FPV camera 10:35 Crossfire antena mount 10:58 Smoke stopper for connection pierced 11:33 I'm installing the top frame cover. 12:05 I install propellers HQ Prop ETHIX P3 5.1x3x3 Tri-Blade 5" Prop 4 Pack - Peanut Butter & Jelly
That's kind of a lot for a drone unless you wanted to fly super low to the ground or long range. The thing about experimenting with RF power levels incrementally, is that you get a better appreciation of the fine tuning your gains in other departments such as layout and antennas. People who are immediately maxing to ~1W or more could possibly be getting the same performance at 1/4 that power with other tweaking. If you use a reliable/dependable/vetted VTX and antenna pair then you don't need anywhere near 450mW for LOS flying. I used the max power 5.8g stuff for a little while and it worked well, but they eventually crapped out, and I realized I didn't need to be pushing that much power (and I'm talking ground level with an RC Car).
Man where were you when I was looking for a build like this? I have everything down to the vtx and camera. I was trying to figure how to mount. My one question is shouldn't you have to nuts on the EFC and FC? Also what color lock tite did you use?
Yes, you are right, but for starters, this is a fairly budget version that anyone can build. If you break the camera, it will cost 19 dollars, not 100 like DJI I will update this drone version. I will install DJI O3 on it
Hello friends! Im start build fpv drone for UA guys. ВMaybe you'll want to try flying too and you'll like it. #fpvdronebudgetbuild #fpvdrone #howbuildfpv
0:00 Entry
0:17 Details for the construction of an FPV drone for $215.
0:58 Tools for building an FPV drone.
1:28 Frame RDQ Source One V4 5" Freestyle Frame
2:22 SpeedyBee F405 V3 BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 50A 4in1 ESC)
3:24 EMAX ECO II Series 2306 2400Kv Motor
4:33 Placing EFС+FC
5:11 I cut the wires on the motors
5:33 I'm soldering wires from motors
6:43 I solder power wires
7:03 VTX Flywoo Goku VTX625 V2 16x16/20x20/25x25 25-450mW 5.8GHz VTX - U.FL
8:00 Install flight controller SpeedyBee F405 V3 BLS 3-6S 30x30
8:15 I solder VTX to a useful controller
8:35 Camera Foxeer Razer Mini 1200TVL 4:3 PAL/NSTC CMOS FPV Camera (2.1mm)
9:05 BetaFPV ELRS Lite 2.4GHz Receiver but I will use Crossfire rx nano
10:25 Mount FPV camera
10:35 Crossfire antena mount
10:58 Smoke stopper for connection pierced
11:33 I'm installing the top frame cover.
12:05 I install propellers HQ Prop ETHIX P3 5.1x3x3 Tri-Blade 5" Prop 4 Pack - Peanut Butter & Jelly
Nice video. I recently built a similar 6S drone using Source One V5 and SpeedyBee 405 V4 stack following Troncat FPV’s tutorial.
Awesome video my friend nice 😊 share very impressive build on the drone thanks for sharing great job thumbs up 👍
Thanks so much for support my videos. I hope I can show more videos fly in real life not on sim only.
FPV drone!!!~~~ Thumbs wide up!!👍👍💯👍👍
Thanks for the visit! Maybe you want to try also?)))
Nice build, the only element i think i would quickly want to upgrade is the vtx, 450mW is low, but overall good budget build.
Yes, you are right, my friend. I'll update it in the next video. 800mW $24
That's kind of a lot for a drone unless you wanted to fly super low to the ground or long range. The thing about experimenting with RF power levels incrementally, is that you get a better appreciation of the fine tuning your gains in other departments such as layout and antennas. People who are immediately maxing to ~1W or more could possibly be getting the same performance at 1/4 that power with other tweaking. If you use a reliable/dependable/vetted VTX and antenna pair then you don't need anywhere near 450mW for LOS flying. I used the max power 5.8g stuff for a little while and it worked well, but they eventually crapped out, and I realized I didn't need to be pushing that much power (and I'm talking ground level with an RC Car).
Excellent quality build bro, for the money, good job
Glad you like it! Its my first build))) Im recomended VTX SpeedyBee 800TX
Very nice craft 👌 friends💪👍😆
Thank you so much 😊Perhaps you would like to try flying? I will definitely do it when I can. Now I build them not for myself but for the military
@@KobtsevRC 😲👍
I like how it flies 👌
I hope I will see it soon))) Thanks for support and comment!
Awesome tutorial!! u need to show how it flies👍👍big like for this!
We are now banned! I hope soon!
@@KobtsevRC aah okay, so flying is not allowed, I understand
perfect job champ...looking great drone
keep going champ😍👌
Thanks so much for watching and support
Thanks for sharing 👍
Thanks for watching
Cool tutorial, whens the set up video coming?
Very soon! I hope. Thanks for support!
Great stuff! I want a drone now 😂 Thank you ! Keep up man! :)
Thank you very much for your support! Drone is cool! I love it as much as cars!
I would be interested in a 3.5” sub 250 4s build. On a budget
I'll check it out! If I can put it up and you're interested, I'll do it! Nex build 7" Long Range drone Next build micro drone
Nice video,I need your help is Elsr 24t 2.4Gh receiver compatible with Flysky Fsi4 transmitter
Nice build sir thanks for sharing this I'm starting to build my own fpv + 1 subscriber thanks
Awesome, thank you! Have a happy flight
How u doing?-lie!fantastic drone, goodbye! )
Thank you very much, my friend. Yes, it’s really not a bad drone for such a price.
Man where were you when I was looking for a build like this? I have everything down to the vtx and camera. I was trying to figure how to mount. My one question is shouldn't you have to nuts on the EFC and FC? Also what color lock tite did you use?
I used a blue lock. Yes, I twirled ESC and FC
what is the plastelina holder you use when soldering small parts? How is it called?
can you make a video where you fly this thing
No, I can't do it, we can't fly now. I gave this drone to the military. I can fly after the war
@@KobtsevRC no you did not
I can do it after
❤❤
Hey, can I build one of these drones without the camera, vtx and antenna? Just to fly the drone itself.
Basicly without the fpv setup. Does it burn my stack if I connect the power to it without camera system?
I don't think it will burn, you can try and tell us)))
Yes you can...
how to use the S9 pad on SpeedyBee F405 v3 to output PWM?
I don't understand what you are talking about. If you want to use filters, you need to flash the speed controller with Bluejay
I think I understood. Do you want to use servo?
@@KobtsevRC indeed I want to use a servo
In the long run there’s no such thing as a cheap fpv drone
Yes, you are right, but for starters, this is a fairly budget version that anyone can build. If you break the camera, it will cost 19 dollars, not 100 like DJI I will update this drone version. I will install DJI O3 on it
Lol just get better n dont crash
А яка максимальна швидкість?
just buy it used and you safe 70€
If you can find it used please