Ultimate Beginners Guide to Building A FPV Freestyle Drone
HTML-код
- Опубликовано: 24 июл 2024
- 🙋🏼♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
➕ More
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv.com/the-hangar
Tutorial on the complete process of building a 5" Freestyle FPV Drone from choosing your parts, building your drone, programming BetaFlight, Tuning and then Flying!
This video is Sponsored by SpeedyBee, T-Motor and FlyFish-RC.
Parts List (* denotes sponsored item)
Frame: FlyFish-RC Volador DC5*
Motors: T-Motor Velox v2 2207 1750kv*
Flight Controller & ESC: SpeedyBee F405 V3 BLS 50A 30x30 FC&ESC Stack*
VTX: SpeedyBee TX800*
Camera: Runcam Phoenix 2 (Micro) *
Antenna: Rush Cherry Straight MMCX RHCP
Receiver: Radiomaster RP1 ExpressLRS
Propellers: Ethix P3.5 Radberry
Batteries: Tattu R-Line 6S 1050mah
TimeStamps!
0:00 Intro
0:13 Sponsorship
0:21 How to work out which parts to buy
0:35 Parts Needed to Build a FPV Drone
0:40 Work out what parts are best for an FPV Drone
0:54 The First Part to Choose in Building a Drone - Frame
1:16 How to Choose a Flight Controller & ESC
3:40 How to Choose a Video System for FPV
3:56 Which FPV Cameras are compatible
4:40 How to Choose an Analog VTX
5:32 Which Radio Receiver to Buy
5:38 Which Propellers to Buy for a 5" Freestyle Drone
5:49 Which Motors to Buy for a FPV Drone
6:10 Which Batteries to Buy for a FPV Drone
6:28 Different Motor Sizes for 5" Freestyle Drones
6:39 Which KV for 4S and 6S
7:05 Where to Buy FPV Drone Parts
7:19 What Tools Are Needed to Build an FPV Drone
7:33 Assemble FPV Drone Frame
• Volador Frame Build Tu...
7:51 Do THIS Before Soldering Anything
8:07 Problems I Found During Dry Fit and Solutions
8:47 How to Solder an ESC
9:59 Which Capacitor to use on an FPV Drone
10:18 Where to solder Capacitor on an FPV Drone
10:38 How to Install Motors on an FPV Drone
12:10 How to Solder Motors to an ESC
13:00 How to Install Battery Lead on a Drone
13:23 XT60 Connectors Explained
15:44 Solder Analog FPV Camera to Flight Controller
17:32 Solder Analog VTX to a Flight Controller
19:28 Mount the VTX to the Frame
20:08 Wire up ExpressLRS Receiver
22:20 Check with a Smoke Stopper before Plugging in
22:50 How to Flash Latest version of Betaflight
23:15 How to program your fpv drone on Betaflight
23:43 How to set Flight Controller Direction
23:54 How to setup the Betaflight Ports
24:02 You can use SpeedyBee App for SpeedyBee Flight Controllers
24:19 Setup Receiver in Betaflight Ports Tab
24:40 Setup Analog VTX in Betaflight Ports Tab
25:28 How to Setup the Betaflight Configuration Tab
26:18 How to Setup Board Alignment in Betaflight
27:23 How to Setup a Receiver in Betaflight
28:01 How to configure Channel Map in Betaflight
28:44 How to setup Modes / Switches in Betaflight
29:33 How to setup OSD in Betaflight
29:54 How to setup VTX Tables in Betaflight
github.com/betaflight/betafli...
31:00 Unlock SpeedyBee TX800 VTX
31:30 Configure a BLHeli_S (BLS) ESC
31:48 Flash BlueJay to a BLS ESC
32:35 How to PID Tune A Drone EASILY
33:41 How to Configure Motors in Betaflight
34:39 How to Reorder Motors in Betaflight
34:55 How to Set Motor Direction in Betaflight
35:53 My Motors wont stop speeding up
36:21 Put the Top Plate on
36:44 How to Install Propellers on a FPV Drone
37:26 FInal Thing Before Flying
37:53 Flight Test!
#FPVdrone #FreestyleFPV #BetaFlight #SpeedyBee #TMotor #FlyFishRC
🏠 Frames:
- FlyFishRC Volador VX5 - bit.ly/3ZeTlnF
- FlyFishRC Volador VD5 - bit.ly/41f00zY
🛞 Motors - 5" Freestyle (4S 2550kv & 6S 1750kv)
- Budget: T Motor Velox V2 - bit.ly/3xLLHFJ | amzn.to/3IQwHwr
- Premium: T Motor F60 Pro IV - bit.ly/3ExU0Zv | amzn.to/3EyJTUe
🤖 Electronics
Budget Stack: SpeedyBee F405 - amzn.to/3IkVaII
Mid-Tier Stack: SpeedyBee F7 - amzn.to/3IQDS84
Premium Stack: T Motor F7 amzn.to/3IPVCA9
🎮 Radio Controllers
- Gamepad Style: Radiomaster Zorro ELRS - bit.ly/3KAp66G | amzn.to/3Y32jDj
- Mid-Size: Radiomaster Boxer - bit.ly/3Zh1Tuh | amzn.to/3m4Lyu9
- Full Size: Radiomaster TX16S Mk 2 - bit.ly/3knCb8u | amzn.to/3Sq71Kg
📡 ExpressLRS Radio Transmitters
- Nano (for Gamepad Radio's): bit.ly/3INSBAA
- Micro (for Mid & Fullsize Radios): bit.ly/3xPggdr
- Radiomaster Ranger: bit.ly/3lYXcH8
📡 Radio Receivers
- ExpressLRS Ceramic Antenna: bit.ly/3lTkmyu | amzn.to/3m6JJNG
- ExpressLRS Mini T Anteanna: bit.ly/3lTkmyu | amzn.to/3KzZpTF
DISCLAIMERS:
This video and description contain affiliate links, which means that if you click on one of the product links, I'll receive a small commission at no additional cost to you. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! 
Наука
🙋🏼♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
🧰 All my workshops (live & replays)
🧑🎓 All my Tutorials
📋 All my Guides
📺 All my Videos Add Free
🎬 Directors Cut Videos
⏰ Bench Time Live Hangouts
🤝 1:1 Help/Support
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv.com/the-hangar
An absolute outstanding video! I cannot believe how well you covered this A-Z. I finished my first build last week. Been buying the BNFs which are great but they didn't teach me much. I had to watch several different videos to get smart on everything. You have covered everything great, especially the choices of hardware. This is a model video for all newbie's to watch! Great Job!
Thanks JD, glad it helped you. Yeah there was a lot to cover, and it took ages to edit to be able to get that all into a single and concise 40 min video.
I hear quite a bit parts selection and compatibility is a challenge, so hopefully that was covered effectively
Hahaha! "Red disgusting tape, I'm looking at you, Bardwell." 🤣
Read this comment exactly at the timing of that scene
Great video! This contains all the information I need to build my first FPV quad. Beautifully explained!
You are welcome
i would have killed to have a video like this when I started. Great Job Darren!!
Thanks Sway
ONe of the best video for quad building!
Thank you for this amazing video. It is going to help a lot with my first build❤
You are welcome. Please let me know if I can help
Awesome job on the video!! Plus thank you for explanation of the installation of props. After 4 or 5 videos, I got it down now!!!!! Whoop whoop
Glad it helped!
I think I might have burnt up a fc and a vtx on my first build because I had no ideal you had to flash them and set up esc along with vtx.Your video probably saved me a lot of cash,thanks so much for the video. You have a new fan!
Hey Darren, Its always good to watch builds, you always learn somthing new,thanx for sharing,i use to make vids and verry time consuming, even with todays tech.i just realized it was you from the other day when the quad took off at the end.hehe great stuff!! God bless n be safe.
Hey Michael, yes this took ages to put together!
very nice build tutorial :)
Thank you!
Man thank you so much for so much info thanks brother
No problem 👍
I didn't watch the video, it's long, I just went through the bookmarks. I just realized again that it's really not for everyone to be able to build a fpv quad, it's just too complicated. And this is the simplest version of the quad, it is without GPS and other things needed for example for LR. GPS problems are always on the next level. This video must scare the greenies. It is necessary to appreciate the enormous amount of work that has gone into the video so far.😎
Thanks MomoBrut... It looks intimidating to see how much goes into a drone build, but how do you eat an elephant? 1 Bite at a time. The thing is, you are going to need to learn to build one for FPV purely for the fact that even if you buy a pre-built drone, it will break when it crashes, then you will need to fix it. Knowing how to build is learning how to fix it.
@@DarrenAllatt Well, I built a lot of quads, that's why I write what I write. Putting everything in one video is I don't know how to say it, I actually said it. The rookie won't be able to understand most of the video anyway, and after half of it he'll be downright overheated. And those who are not greenies just smile and nod their heads, it's done nicely. It would probably be more reasonable to just do it gradually, do more separated videos ... but I'm older now, and maybe I perceive things differently. But young rookies just can't focus on something like that for that long.
Love building ❤
What was the last quad you built?
@@DarrenAllatt Not too long switched to 6s so I’ve only rebuilt recently. Latest was putting thicker XL5 V5 arms on a source one body…so far it’s indestructible😅💪🏼
For my next build video, what should it be? Drop your requests & parts suggestions?
- What size? (3", 3.5", 6", 7")
- Sub 250 Gram or Any weight
- DJI 03, HD Zero, WalkSnail
- Freestyle, Racing, Long Range
- Full Size GoPro vs Mini GoPro, No GoPro?
You tell me, what you'd like to see!
Sub 250g DJI 03
@@seanpaul211 Yes, excellent suggestion! Let's see what size Darren chooses!
A sub250 4" please
GoPro
Walksnail 250
AWESOME THANK YOU CHARL SOUTH AFRICA 😁😁😁😁😎🙏🙏🙏💪
Thanks!
Hey, thank you so much for the super thanks! I do really appreciate that. Please let me know if you need any help
Superb video. With that said, is there good instruction on going from BetaFlight to INAV with this setup?
I don’t fly iNav and it’s a PITB to setup. If you just want return to home, betaflight can do that and do it well… inav also has some build requirements such as positioning of the GPS etc.
Is the speedybee F7 v3 stack pin out the same as the DJI 03 air unit wire to just plug in no soldering?
I know on the F4 it is, so I’d assume the F7 is too. Check the diagram on their website to be 100%
Hello sir I have a question where should i connect ibus reciver to f405 v3 flight controll
Hey! I would try either the SBUS Pad or an RX Pad. That's not something I am used to as it's not common in FPV, so you may need to goggle that
I need this for a 3 inch to. This video was great
I have that coming up in the next month or so, just awaiting for the frame after Chinese New Year.. Make sure you are subbed to find out when that video drops!
@@DarrenAllatt Whats your Frame of choice for 3"?
I haven't like 3" since 3.5" became a thing. it used to be the Micro Apex, which is quite heavy for a 3" build, but QuadMula are sending me the Siren F3 (3") for another build video, so we will see how that goes, it looks very promising!
How to use the S9 pad on speedybee f405 v3 for PWM output?
I’m not google mate.
Can you toggle horizon mode, angle and air mode in beta flight, great video helped me out tons, and is it hard to get a drone permit in Australia??
Yes you can toggle them on in BF, just set the switch in the modes tab.
To fly in Australia you need to be a member of the MAAA and fly at an MAAA airfield with a spotter.
But if a tree falls in the woods and no one is around. Did it fall?
my tmotor 2207 v3 1950kv is hot after every flight, i set the motor timing to medium same as the video. Does that affect the temperature?
When you say hot, how hot?
They won’t be “cold” or pre-flight temperature as you have 26 volts running through them and they are spinning at 50,000 RPM.
Also what quad are you using and how much does it weigh?
Wow man wot a video im gunna build my own now thanks to u my man please do one with dji 03 unit and crossfire cus thats wot i wanna build lol ❤❤❤❤❤ well done man awesomeeee vidddd
Thank you! Happy building!
Can you try to give an estimate of about how fast this drone might go on 6s? I’m debating if I should build my own drone or just buy a Nazgûl Evoque.
This drone or a Nazgûl Evoque would go the same speed. Top speed would be 120km/h
If you are looking for speed, you want a 6S Racing Drone.
Building vs buying, you get better quality for the same price.
Bardwell's infamous red tape. 😁 he uses cloth tape too. 😉
It is worth mentioning at around 8:30 about signal polarization. I see that your receiver has right-hand polarization (RHCP), the same antenna should be on your googles. Also let me know which of two is most common? Thanks!
Typically for Analog and HdZero you use RHCP and for DJI and Walksnail it’s LHCP.
can i use 6s 1550 mah 130c batteries on a 5 inch buuild with 2207 1850 kv motors or will a 1550 mah be to big and heavy?
Yeah it will be fine, just on the heavier side
GRAZIE!!
Prego!
In firmware Flasher on beta flight I have selected my correct flight controller (Speedybeef405V3) and the latest firmware version for the board next I load firmware [online] then flash firmware and then I get Failed to open serial port. Im not sure what’s going on.
Can you connect to Betaflight normally ?
@@DarrenAllatt yes
@@noahlee4933 try holding in the boot button on the FC as you plug in to usb, should go into DFU mode
Which soldering iron do you recommended?
TS100
i recommend you suggest what wiring to buy
what gauge, twisted or solid core .....
26AWG silicon. Get the kit I show off Amazon.
How long does this fly for? Just curious. New to the “drone life”
So, most FPV Drones, like this one are designed for performance not efficiency.
This is a freestyle drone, so it’s acrobatic and gets around 5-8 mins of acrobatics depending on how much you push it.
Learn to build a 5" Freestyle FPV Drone: www.darrenfpv.com/5-build-course
With specific courses for each video system:
‣ Analog
‣ DJI O3
‣ Walksnail
‣ HD-Zero
If I use 1750kv motors and 4s battery is it wrong?
Not wrong, just under powered. Those motors are ideal for a 6S power source.
@@DarrenAllatt As I was told, it is the other way around. 1750kV motors cannot withstand 6s
@@vax_tawhoever told you that was completely wrong. You have it around the wrong way.
Can you use a 2555kv with a 6s battery
You can, but:
a) your ESC will most likely catch fire if you don’t put a motor output limit on it.
b) yes if you put a motor output limit on in Betaflight
@@DarrenAllatt thank you so much, didn’t think you’d reply❤️
Rp1 vs Rp2 wich is best ??
Define “best”
Won’t get the Antenna destroyed in a crash, RP2
RP1 gets a bit more range due to the exposed antenna vs a ceramic.
For a 5” Freestyle, I’d go the RP1
How i access camera menu ?
Which camera menu?
As in to change the camera settings, or to change the quad / drone settings
@@DarrenAllatt runcam camera setting bro how to change im use same FC and camera I connected rum cam blue wire CC pad but can’t access cam menu ?
T6 and R6 what is TX and RX?
Transmit and Receive.
When you wire. You wire a TX to an RX and a RX to a TX of the same number.
@@DarrenAllatt on speedybee not find TX or RX only T6 R6, the x is a placeholder, wire T to T and R to R ?
do you have also some recommendation for a drone shop in europe/ germany?
I’m sorry I couldn’t recommend one as I don’t even buy from the US stores given I’m in Australia
@DarrenAllatt whats the build cost in Aud?
oh no JB is in danger
Oh I got a heart. My pleasure
I'm from India, building my budget drone in category of racing. Here is the part list.
Speedybee f405 V3 stack
Readytosky gt2205 2300kv motor
ZMR250mm frame
5inch triblade
2200mah 3s lipo
💨🚀🎮🥽😇😇👏👏👏👏