G'day Mate, I have a D40 in Australia and i have picked it up off my brother who looked after it but it only gets 20 to 21 litres per 100 km which is dismal. It was stalling and idoling roughly and a funny beat but i have folloewd all your sensor cleaning advice and doe all filters and unclogged the filthy ERG as per your video and she runs way better down low but still gastly fuel econemy no matter how slowly i drive her. So i will get new injectors in her and hopfully that solves my poor mileage. Thanks so much for your videos your a legend, they are the best online mate. Cheers and have a happy new year in 2020
A big thank you back mate your support means a lot we will keep you updated on other cost saving repairs from the new unit very soon, Thanks again the Team Des Suzanne Nathan and Kyle.
@@MatyGti12 busca cualquier scanner que ofrezca injector coding. eBay tiene varios económicos como el Foxwel de alrededor de 180 Lucas. Si tienes money compra un Autel de la series 900 pero ahí estás hablando de 3000 a 3700 dólares más la importación. Suerte.
@@MatyGti12 no olvides que deberás descargar el software específico para la marca que vayas a programar .....las primeras descargas son gratis y van con el equipo, pero hay scanner s que para cada marca que adiciones tendrás que pagar extra.....mientras más barato menos marcas podrás ver ( me refiero al scanner). Hay scanner programadores específicos para Nissan y Mitsubishi....son australianos no recuerdo la marca pero hay un modelo i vident...siempre calcula lo que invertirás en máquinas versus tu trabajo....muchas veces nunca pagas la máquina.
Hi mate iv got a Jeep Cherokee 2oo72.8 can I just change 1 injector or do you have to change them all don't know if you would know but thought I would ask thanks but no worries if you don't sound
I’ve change my injector number 2 on W211 E220 2008 model the car is still misfires slightly will I need to reprogram or code the the new injector to the car? Thanks
I've replaced the injectors in a civic 2.2 diesel with used ones but the car is missing, do you think the injectors need coding and how much do you charge for the service thanks
Sir, do you need to clear the pilot quantity learning value after inputting injector compensation code ? I mostly do Toyota cars, and if I don't clear the pilot quantity learning value after coding the injectors, I get EEPROM ERROR DPF THERMAL DEGRADATION or something like that. Is this problem exclusive to toyota vehicles only or is there any work-around about this problem ? Thanks
Do you have suggestion on a scanner that is cheap enough to do the injector reprogram. Would love a SnapOn like you have but can’t afford it. Keep the videos coming. Thank you.
Our lad had water in his diesel 15 months ago Everything was meant to be changed, but the mechanic never changed the injectors (perhaps he didn't have the machine you've used here?) Anyway, 3 month ago the D40 started playing up, after 3 weeks at the workshop, looking for the problem, they found rusted injectors! Is that something you've seen or heard of before?
Hi Des I have a 2007 pathfinder I have had the suction control valve replaced any suspect hoses the hand primer. A new factory fuel filter and every now and then it still goes into limp mode any ideas. Thanks
West yorkshire engine services yes the reset was done. Really love to get this sorted I've spent nearly $2000:00 trying to get it right. We have a disabled daughter who does horse riding and I need the pathfinder reliable to tow our horse float. Thanks Terry
West yorkshire engine services Hi Des. I contacted you a few days ago with an issue where my Pathfinder going into limp mode. Well on the weekend I changed the air filter when I purchased the Pathfinder it had a K&N washable air filter anyway when it got serviced by a different mechanic he put in a new paper filter so anyway I put a new K&N filter back in it and it has not done it again weird
Hi guys..i have to replace number 2 injector in my 2011 D40..do I have to remove the glow plugs or can I do it without having to touch them...p.s it is a Spanish built model..cheers
Hi I'm trying to figure something. a navara was in an accident.it started up good, idling perfect.now the check engine light is on and I'm getting a loud knocking from the engine.the injectors were taken out and cleaned.the noise decreased but I'm getting the codes p0200, p2147, p1645 all of them saying something is wrong with the injectors.can you give me some guidance.thanks.tried to reprogram them.dont have the values because it the scan tool is stating that the values are unregistered
hi brother , i have hyundai tucson 2006 and it has a problem , when it is going it switch off it self we have change every spare parts like injectors , common relay sensor and wiring and fuel pump but the problem still in what can i do?
Hi, i bought a navara last week, it has a slight misfire on idle and up to about 2500rpm, after that it pulls fine, there was an injector code but was cleared by the mechanic, but the problem was still there, please help
Out of curiosity a bloke we know changed 1 of his injectors, however now redlines itself on start up and keeps doing so unless it's shut off . Would this be due too not reprogramming the new injector too the vehicle?
Love your channel and thanks for all the help over the years. If I replace the injectors myself, can I still drive it to the mechanic to get them reprogrammed? Or is it something that must be done right away? Will the car run okay before the reprogram? Thanks.
@@brandonjcollins1062 no but I did figure it out. You can drive fine like that, all you are doing is programming in the tolerances so minor improvement is all. Hope that helps. Cheers.
Here's a weird one. Engine management light came on on my 2004 Navara 3.0 L TDI I imported from Australia. The diagnostic thingy says it's a injector problem. However the ute runs as smooth as a wistle. If I start it normally the management light comes on and it only runs in Limp mode. However if I turn the ignition on then push accelerator to the floor before the engine turns over it runs perfectly normal with full power. Any idea's?
Hi, guys. you're great. i have a Hyundai santafe 2005 crdi model and my idle speed is a bit above 1000 rpm. Please, how do i tune it down to about 750 rpm? Thanks a lot..
GreaT ChanneL... LotS Of Info"s... So Many ScannerS in The Market.. Can You Pls Tell Us Short LisTs Of GooD Scanner that Include injectoR ReprogramminG.. 🙏
I'm after some injector help on my xtrail. I have removed mine and the part number is 0445115022 just want to know if part number 0445115007 are the same and would work? Thanks
I ended up biting the bullet and got a brain new bike later from Japan to replace all my 2002 Nisan X trial do you original had a cracked block 12 to having a gasket replaced it with in perfect condition
Sorry about the previous comment was supposed to say I replaced the complaint with a crate motor straight from Japan the other engine have a crack in the block
G'day Mate, I have a D40 in Australia and i have picked it up off my brother who looked after it but it only gets 20 to 21 litres per 100 km which is dismal.
It was stalling and idoling roughly and a funny beat but i have folloewd all your sensor cleaning advice and doe all filters and unclogged the filthy ERG as per your video and she runs way better down low but still gastly fuel econemy no matter how slowly i drive her. So i will get new injectors in her and hopfully that solves my poor mileage. Thanks so much for your videos your a legend, they are the best online mate. Cheers and have a happy new year in 2020
Hi mate how did you go with this one as I have the same issues
Check your MAF sensor first
Big THANK YOU nice I never knew the injectors needed separate programming and nice to see you guys back happily
Keep the good work Thank you
A big thank you back mate your support means a lot we will keep you updated on other cost saving repairs from the new unit very soon, Thanks again the Team Des Suzanne Nathan and Kyle.
Yeah I also knew some few days ago
Good to see you back , and thanks for the advice you gave me over the phone regarding fuel additive 👍
It's really good to be back thank you so much for your support even better video's due out soon.
This guy should get a Gold medal 🏅
He's really helping people and does the job professionally :)
And has the best intro ive ever seen
Hi what's the program called as i need to cde mine Ito a Peugeot expert van?
Fantastic videos mate. They´re helping me a lot with my Pathfinder.
Brilliant video helped me understand alot
Thanks for sharing this video
When I should do reprogramming the injectors
And what happens when do not do this job
Thanks again my dear bro
Depends on the year and if you have any fault codes all the best with it thanks for your comment
Des i love your videos they are very helpful thank you
Great. I was just looking for this. Cheers fron Chile.
Con que escáner pudiste reprogramar los inyectores?
@@MatyGti12 busca cualquier scanner que ofrezca injector coding. eBay tiene varios económicos como el Foxwel de alrededor de 180 Lucas. Si tienes money compra un Autel de la series 900 pero ahí estás hablando de 3000 a 3700 dólares más la importación. Suerte.
Fíjate que también comprueben DPF....ASI SABES QUE TRABAJARAN CON DIESEL.
@@MatyGti12 no olvides que deberás descargar el software específico para la marca que vayas a programar .....las primeras descargas son gratis y van con el equipo, pero hay scanner s que para cada marca que adiciones tendrás que pagar extra.....mientras más barato menos marcas podrás ver ( me refiero al scanner). Hay scanner programadores específicos para Nissan y Mitsubishi....son australianos no recuerdo la marca pero hay un modelo i vident...siempre calcula lo que invertirás en máquinas versus tu trabajo....muchas veces nunca pagas la máquina.
Hi mate iv got a Jeep Cherokee 2oo72.8 can I just change 1 injector or do you have to change them all don't know if you would know but thought I would ask thanks but no worries if you don't sound
Thanks for your video's which cylinder is classified as cylinder 1 is it the rear toward the transmission?
Gee's try and get someone here Australia to encode injectors without charging like a wounded bull.
You doing a good job man.
I’ve change my injector number 2 on W211 E220 2008 model the car is still misfires slightly will I need to reprogram or code the the new injector to the car?
Thanks
Great work des !!
I've replaced the injectors in a civic 2.2 diesel with used ones but the car is missing, do you think the injectors need coding and how much do you charge for the service thanks
Are diesels injectors for a ford coded in cylinder number order or firing order thank you
Sir, do you need to clear the pilot quantity learning value after inputting injector compensation code ? I mostly do Toyota cars, and if I don't clear the pilot quantity learning value after coding the injectors, I get EEPROM ERROR DPF THERMAL DEGRADATION or something like that. Is this problem exclusive to toyota vehicles only or is there any work-around about this problem ? Thanks
Would your Snap On work on big trucks 2015 freightliner for injector s or fuel dd 13 and 15
Do you have suggestion on a scanner that is cheap enough to do the injector reprogram. Would love a SnapOn like you have but can’t afford it. Keep the videos coming. Thank you.
Our lad had water in his diesel 15 months ago
Everything was meant to be changed, but the mechanic never changed the injectors (perhaps he didn't have the machine you've used here?)
Anyway, 3 month ago the D40 started playing up, after 3 weeks at the workshop, looking for the problem, they found rusted injectors!
Is that something you've seen or heard of before?
Hi Des I have a 2007 pathfinder I have had the suction control valve replaced any suspect hoses the hand primer. A new factory fuel filter and every now and then it still goes into limp mode any ideas. Thanks
Hi Terry did you do the fuel pump reset when you changed the suction control valve.
West yorkshire engine services yes the reset was done. Really love to get this sorted I've spent nearly $2000:00 trying to get it right. We have a disabled daughter who does horse riding and I need the pathfinder reliable to tow our horse float. Thanks Terry
Hi Terry we will be at work for 10.30am uk time in the morning give me a bell on 01274 663999 we want to help Many Thanks Des.
You need to scan the ECU for any fault codes then get back to me, cheers Des.
West yorkshire engine services Hi Des. I contacted you a few days ago with an issue where my Pathfinder going into limp mode. Well on the weekend I changed the air filter when I purchased the Pathfinder it had a K&N washable air filter anyway when it got serviced by a different mechanic he put in a new paper filter so anyway I put a new K&N filter back in it and it has not done it again weird
Hi guys..i have to replace number 2 injector in my 2011 D40..do I have to remove the glow plugs or can I do it without having to touch them...p.s it is a Spanish built model..cheers
got a diagnostic reading saying open circuit on number 3 injector. what does this mean
Hi I'm trying to figure something. a navara was in an accident.it started up good, idling perfect.now the check engine light is on and I'm getting a loud knocking from the engine.the injectors were taken out and cleaned.the noise decreased but I'm getting the codes p0200, p2147, p1645
all of them saying something is wrong with the injectors.can you give me some guidance.thanks.tried to reprogram them.dont have the values because it the scan tool is stating that the values are unregistered
hi brother , i have hyundai tucson 2006 and it has a problem , when it is going it switch off it self
we have change every spare parts like injectors , common relay sensor and wiring and fuel pump but the problem still in
what can i do?
Hi, i bought a navara last week, it has a slight misfire on idle and up to about 2500rpm, after that it pulls fine, there was an injector code but was cleared by the mechanic, but the problem was still there, please help
What machine are you using for reprogramming?
Out of curiosity a bloke we know changed 1 of his injectors, however now redlines itself on start up and keeps doing so unless it's shut off .
Would this be due too not reprogramming the new injector too the vehicle?
no.
Love your channel and thanks for all the help over the years. If I replace the injectors myself, can I still drive it to the mechanic to get them reprogrammed? Or is it something that must be done right away? Will the car run okay before the reprogram? Thanks.
@Trevor Fraser did you get an answer? I have the same question to lol
@@brandonjcollins1062 no but I did figure it out. You can drive fine like that, all you are doing is programming in the tolerances so minor improvement is all. Hope that helps. Cheers.
@@TrevorFraserAU awesome.. Thank you!
Can anyone program them or do you need to go to dealer? What about a smaller mechanic?
Is this the same for a Nissan 2.7 Terrano ,
great video, thanks.. been a big help..
Hi where did you get the injectors from?
Here's a weird one. Engine management light came on on my 2004 Navara 3.0 L TDI I imported from Australia. The diagnostic thingy says it's a injector problem. However the ute runs as smooth as a wistle. If I start it normally the management light comes on and it only runs in Limp mode. However if I turn the ignition on then push accelerator to the floor before the engine turns over it runs perfectly normal with full power. Any idea's?
Dirt in your fuel system, also watch your KPG, Do the filter also, Defo fuel issue. Des
West yorkshire engine services Thanks I'll get that looked at Monday.
Hi, guys. you're great.
i have a Hyundai santafe 2005 crdi model and my idle speed is a bit above 1000 rpm.
Please, how do i tune it down to about 750 rpm?
Thanks a lot..
Hi, is there anything that can be done if the code on the injector is unreadable?
hello des have just changed one injector the car runs will i need it programing in or will it relearn the values over time
no you should be fine
Brilliant Des :)
Thanks mate your support means a lot to us all, more top tip video's due out soon Thanks again Des Suzanne Nathan and Kyle.
GreaT ChanneL... LotS Of Info"s... So Many ScannerS in The Market.. Can You Pls Tell Us Short LisTs Of GooD Scanner that Include injectoR ReprogramminG.. 🙏
I scan the top of the Injectors with a QR code scanner, and the codes are too long to fit in a new injector codes,
What am I doing wrong?
Hi guys can I fit euro 4 injectors into a euro5
mcgru lad no buddy totally different
How much is 35/gallon to litres/kilometre?
He´s using UK sistem so will be 12.3 km/l or 46km/gal
well don
Must u code a diesel van after putting injectors
Yes you do if you had to get new if just recon of the old unit and goes back in the same hole should be fine
I'm after some injector help on my xtrail. I have removed mine and the part number is 0445115022 just want to know if part number 0445115007 are the same and would work? Thanks
Bradford I should have known
Thats cool as that machine
Hugh many thanks for watching more due out soon to help you save money in the future, Many many thanks Des Suzanne Nathan and Kyle.
Hi I'm Andrew I'm from South Africa I have a 2007 2.5 dci nissan pathfinder and I have a fault p0093 large fuel leak
How to get those code?
And how to know which is which
I ended up biting the bullet and got a brain new bike later from Japan to replace all my 2002 Nisan X trial do you original had a cracked block 12 to having a gasket replaced it with in perfect condition
Sorry about the previous comment was supposed to say I replaced the complaint with a crate motor straight from Japan the other engine have a crack in the block
Thank you so much.
nz
Trinidad and tobago