*What project car would you choose to win?* This Nissan 350z 2003 Acura Rsx Type-S 1965 Chevy C10 Evo Swapped 2g Eclipse Turbo 5.0 Swapped Ranger 08 Saab 93 Aero SportCombi wagon Ls swapped Notchback Foxbody mustang project* K Swapped Caged Nissan S14 project* 2 other mystery cars! ( Civic, Miata, Minivan?!) Here's how you get entered for a chance to win! Every $1 Spent on Motionautotv.com = 1 automatic entry for a chance to win your choice of one of the 10 available project cars. Become a Vip and get 10x entries for the membership + any other products purchased during the sweepstakes period.
I'm not normally a fan of vinyl wraps but it almost seems like a good idea to team up with a vinyl company to wrap all these giveaway cars. Much quicker then all the paint and would give them something they could still like to drive.
@@jjmturbo vinyl wraps are too temporary. What happens in a few years when the vinyl is trashed? If you take it off you have to paint the car or do another wrap.
@@ozzypawsborneprinceofbarkness do you think Trevor has the time to do body and paint on all these cars? There's no way. So yes while it is temporary it would be much quicker and look nice to drive while the owners could decide if the wanted to get paint jobs.
This is what we were missing! I own a 350z and when i saw you unscrew the “highpoint” in the cooling system i stopped what i was talking to my girlfriend about and said “i hate that fuckin thing” theres a post on one of the forums on bleeding the damn de that says you have to burp it 3x with a no spill funnel and the. When its bled every time rev it to 5k and as soon as it hits 5k shut the engine off. Its the only way ive been able to bleed my de fully and if i had time id link the article. But basicaly what happens is the water pump cavitates an air bubble and when you rev it and turn it off it sucks the air bubble out of the water pump. Its a complete and total pain in the ass.
Hope nobody picks this car I like seeing it on the channel. Wide body and some paint! Also what happened to your other buddy Who used to be in the videos all the time? Drove a Saab also I think.
It’s gonna be down in power because you can’t control the vvt on the exhaust side. You need to replace the ecu and wiring harness. Unless it’s the same engine that came out of it. I think i remember them saying that it’s a de not an hr.
I like the nismo bumper, but the rest of the car needs to be a little more aggresive for it to fit, stock 350z's look like someone microwaved them and they melted abit around the edges. While you're at it, if you can put some stock tailights back I'll owe you a big internet favor, these round blacked out ones look like dogpoo
*What project car would you choose to win?*
This Nissan 350z
2003 Acura Rsx Type-S
1965 Chevy C10
Evo Swapped 2g Eclipse
Turbo 5.0 Swapped Ranger
08 Saab 93 Aero SportCombi wagon
Ls swapped Notchback Foxbody mustang project*
K Swapped Caged Nissan S14 project*
2 other mystery cars! ( Civic, Miata, Minivan?!)
Here's how you get entered for a chance to win!
Every $1 Spent on Motionautotv.com = 1 automatic entry for a chance to win your choice of one of the 10 available project cars.
Become a Vip and get 10x entries for the membership + any other products purchased during the sweepstakes period.
I like the RSX tbh
C10 for sure
350z
Kswap s14
Any way we could get an idea on pricing for the cars? Just wanting to get a general idea before planning out a trip
Much better video quality and about time Trev got his hands dirty again!
Second this haha loved it
I'm not normally a fan of vinyl wraps but it almost seems like a good idea to team up with a vinyl company to wrap all these giveaway cars. Much quicker then all the paint and would give them something they could still like to drive.
I'm going to respectfully disagree. I probably won't ever have to worry about it though
@@ozzypawsborneprinceofbarkness what would your reason be to disagree?
@@jjmturbo vinyl wraps are too temporary. What happens in a few years when the vinyl is trashed? If you take it off you have to paint the car or do another wrap.
@@ozzypawsborneprinceofbarkness do you think Trevor has the time to do body and paint on all these cars? There's no way. So yes while it is temporary it would be much quicker and look nice to drive while the owners could decide if the wanted to get paint jobs.
@@ozzypawsborneprinceofbarkness most of these cars paint jobs are shot anyway
Nice work dudes. Excited for more 3UZ S14 content!
what happened to the Merc wagon with om606 swap? or the 4x4 van?
VQs you have to bleed the coolant correctly, they’re known for air bubbles.
Love the content. Y’all’s humor is awesome.
350z Cosmetic upgrades are tastefull!!!! love it
This is what we were missing! I own a 350z and when i saw you unscrew the “highpoint” in the cooling system i stopped what i was talking to my girlfriend about and said “i hate that fuckin thing” theres a post on one of the forums on bleeding the damn de that says you have to burp it 3x with a no spill funnel and the. When its bled every time rev it to 5k and as soon as it hits 5k shut the engine off. Its the only way ive been able to bleed my de fully and if i had time id link the article. But basicaly what happens is the water pump cavitates an air bubble and when you rev it and turn it off it sucks the air bubble out of the water pump. Its a complete and total pain in the ass.
yo my guy if you dude a AC Delete i would appreciate if you can show how to do the heater hose bypass from the lines going to the ac inside the cabin.
Where you at Ty?
With all these different cars that you drive, how do you keep them all insured?
Oh shit, I didn't know you had Moog from MCM come over for this build :-P
Awesome build . U should put new tyres and rims and wrap the vehicle. So exciting
Kbd has very high durability claims for their products. I have a couple on my mustang but be sure to sand the hell out of them before priming
Bro love all the videos and other content
Hope nobody picks this car I like seeing it on the channel. Wide body and some paint!
Also what happened to your other buddy Who used to be in the videos all the time? Drove a Saab also I think.
It’s gonna be down in power because you can’t control the vvt on the exhaust side. You need to replace the ecu and wiring harness. Unless it’s the same engine that came out of it. I think i remember them saying that it’s a de not an hr.
Where the om606 wagon project go? 🥲
What happen to the 2jz mustang?
Back to the old Trev good video
Take that wing out and replace the taillights, that front bumper looks sick tho
Junkyard... junkyard... junkyard... new shirt idea trevys face with the caption "That's some meat right there!"
Sir! Do something with the exhaust on this one
When you get those calls, tell them your name is Mr Jerry from inwood MB in Canada
Very good , im learning everyday with u guys
Uz s14 needs an eaton m122/m112 svt blower
pretty sure it's easier to install the radiator and then attach the fans on these vq's.
I need to here more.. SIR and ......whoop... that is all
other than that we're doing great!!!
I'm interested on the c6 corvette if you are selling it
40k
Sean/Shawn/Shaun looks like a young Wario
Have you ever met Chris Whitcroft
Does ty still work with you
Idk..... it would be cool to own a z...
I want one of these im never gunna be able to.afford sr 240 or a 2jz car and now drifter and youtuber are making these go up
Sounds great🔥🔥
The HR hood is for the bigger engine,
EVO wagon giveaway?
Sean messing with the scammer 🤣
I smashed the like button 🤙👍
Can’t wait for a budget e30 project “cough cough DBO”
I cannot believe what you don't get your Corvette and drift with it
When is the mustang and Supra making a come back
WELCOME TO BAND PRACTICE 🎺🎺🎺🎺🎺
Did I miss something or is Blake no longer on here?
Blake told them "It's not you, it's me" and left.
@@ChipsNeeson ahhh I gotcha
That plastic trim with the emblem just cracks on its own.
Trevor has the best beard on RUclips lol
HAHAHAHAHAHAHAHA
No
"That's some meat right there." Trevor-2021
Yo let’s go!
Keep the front bumper.
I like the nismo bumper, but the rest of the car needs to be a little more aggresive for it to fit, stock 350z's look like someone microwaved them and they melted abit around the edges.
While you're at it, if you can put some stock tailights back I'll owe you a big internet favor, these round blacked out ones look like dogpoo
Ur really doing a compression test with a dead battery lmao
That thing smokes more than my uncle rico
Like your videos, but! Slow down when you swing the camera from yourself to others, I’m getting whiplash!😝
Lol you have a carcaine addiction lol
Uhhhhhh sir?
Come on people hit the like 👍
i get 20 or more of those same medicare scammers calling 7 days a week.
- 👍 👍 🔧 -
lets drop some likes
the hatch/wing combo on the z is ugly. other than that i like the cheap drift car content
Am here
Ima give you guys a hint. Say you are 15years old. They will instantly remove you. And other in the same network, will also remove your number.
I’ll just say for you Trevor if I win I’ll take the 350z off your hands.
yoo
man those 350z are so ugly. almost looks like a VW beetle LOL
please put 50 weight in it or an oil cooler