Это видео недоступно.
Сожалеем об этом.
The process of crafting cast iron enamel bathtubs.A Japanese bathtub factory with a 190-year history
HTML-код
- Опубликовано: 13 ноя 2023
- 👁 Daiwajuko Co., Ltd.
☎️ TEL:+81-92-581-7232
🏠 www.daiwajuko....
🚩 goo.gl/maps/SG...
💌 Contact : processx2@gmail.com
📸 Copyright(C) 2022. Processx. all rights reserved.
I would never expect the process to be so labor-intensive...
最近は値段の手頃なプラスチックの浴槽も増えていますが 汚れも落ちやすく 何より保温性の優れたホーローは最高でしょうね お値段が高いのも納得です😆
而且能用一千年😅
大和重工かなと思ったら大和重工だった。ほんとココ色々と景気に振り回されてる中よく耐えてる会社
いやー、浴槽を作る工程って本当にすごいですね…。
浴槽はこうして作られるそうです。
ビデオはとても役に立ちます、bks Qu、、、
これはすごい、丁寧に扱えば数百年もつ構造ですね。
内も40年使いますが、傷で下地が出てます、あと、どのくらい持つかな?補修より、取り替えでしょうね?
The amount of machinery and equipment needed is absolutely staggering.
Người Nhật làm thì khỏi phải bàn nữa. Lúc nào chất lượng cao rất tuyệt vời..Hi 🇯🇵👍.
I’ve never seen a foundry so clean.
I used to work down the coal mines. You would be surprised how we could even spruce them up, when expecting VIPs. 😂
Neat to see the craftsmanship that goes into the process.....and the music was actually entertaining.
Short and deep. It was nice for the few years I lived in Okinawa. 😊
2月に大和重工の見学に行きました。本社工場だったので吉田の浴槽工場の方は見てなくて浴槽の製造状況はこちらの動画で拝見できてよかったです。タカラスタンダードさんとの関連や、全国のホテルからのリクエストに合わせた受注生産もあったり、企業努力されてる工場の方たちの一生懸命な姿には感動しています。
It's cool to see what real Japanese bathtubs look like, the ones in anime always look like they're big enough for 4 people.
This is a particular kind of bath tub. Most bath tubs are made of resin or steel and are wider and less deep. Also cheaper😂
Yeah, I didn't get the part about casting the iron either. Why not use and mold a sheet of steel, which then is enameled? Mind you, my background is not in metallurgy or anything adjacent, so I might be wrong.
@@babayaga6376 They do manufacture pressed steel baths. Cast iron is the ultimate quality though. Like comparing a Le Creuset pan with a spun steel one. Glad I don't have to carry them upstairs anymore.
The average home in Japan wouldn't have one of those. That style is a more recent one. The more common style is the deep, square tub for 1.5 people, usually out of thermoplastic, connected directly to a gas water heater.
Very interesting to see how countries differ in tub making. Each country has definite needs and desires of usefulness. Yet the similarities are very close to the same . Insulation and smooth clean design with safety in mind.
令人尊敬的日本工藝
うちの浴槽は大和重工のホーローにしたけど,こんなに丁寧に手間を掛けて作ってあるんだ😮 ありがとうございました😊
(知人が二人勤めているのです)
やはり人大の浴槽などと比べて身体の温まり方は違いますか?
@@hirot988 様
比較できない(一台しかない)ので湯冷めなどは正確にはわかりませんが、湯に浸かってない部分の肌触りが以前の樹脂製の浴槽よりずいぶん気持ちいいです。
un peuple fier de son travail
Made in Japan ! 👌👍🎯🏆🥇💪
❤️❤️❤️🇯🇵❤️❤️❤️ 👋👋👋
ショールームできれいなパンフレットを見せるだけじゃなくて如何に手の込んだ作りなのか
この動画を見せた方がいい 心に響く方が沢山いると思う
私は新築でプラスチック浴槽を選びましたが10年もしないうちに傷に染みに大変なことになってます
高くてもホーローにすればよかったと後悔しています
Voll die Luxus-Schüssel 😯
👀👀 didn't thought a bathtub is casted and involve so many heavy machineries 👀👀
目玉飛び出るほど高いのかと思ったら何とか手が届くくらいかも? 毎日使うものだと思ったらちょっと贅沢してホーローもいいものかもしれませんね!
Japan is indeed great
this is so complicated; that bathtub must be very expensive
Un grand merci pour la vidéo!
This is why stuff made in Japan is still so good. The capitalist mindset of "cut costs to increase profits above all else" hasn't invaded their manufacturing to the degree that it has elsewhere, and so we still get skilled craftspeople putting hands on these products throughout the manufacturing process, making sure that what they're making is something of actual quality and worth purchasing. You can tell how outside the norm this is by the number of comments here shocked at how involved the process is.
Wall Street is the biggest enemy of American manufacturing…..cut costs at all costs.
these baths are made to last and probably cost considerably more than a cheap acrylic bath you can buy for less than 100 USD
cutting costs without regard for the product. That's why standards were created in manufacturing to create products with standard performance and durability. ISO6001 for example. International Organization for Standardization International standards development organization
The International Organization for Standardization is an international standard development organization composed of representatives from the national standards organizations of member countries. Membership requirements are given in Article 3 of the ISO Statutes. ISO was founded on 23 February 1947, and it has published over 24,500 international standards covering almost all aspects of technology and manufacturing.
Money Governments and corporations won't buy products unless the manufacturers are certified under ISO production guidelines.
There is an enameled cast iron bathtub at home, and everyone used to have one. Most likely they have small-scale production, that’s why everything is so complicated.
素晴らしい
Amazing Bathtub iron cast enamel manufacturers
いいなホーロー風呂。もし予算がもっとあったら我が家もホーロー風呂にしたかったw
It goes without saying that here is not a room for those who make complaints of products but those who want to see how enameled cast iron bathtubs are produced with such a precision and most of people are admired its processes as well as quality of products which must be superior in maintaining water temperature. The process itself has been kept originally for more than a century but rationalized by the machinery. While foreign visitors are applauding and delighted to see the process of enameled cast iron bathtubs in traditional way, it’s pity some Japanese people can’t be proud of their own traditions and techniques.
This is a good video, thumbs up.
Япония действительно удивительная страна!!!🤘✊👍
It always seem that they could do a lot more but some of these videos they seem to only do a few or just one at a time. If was just for the episode, then seems like a waste of a day if they could be making hundreds more for that one day. Great content! I visited Japan last year 2023, and it was so great. Plan to go again 2025... see you in Japan
Quy trình sản xuất bồn tắm gang tráng men, Nhà máy sản xuất Nhật Bản.. OK 🇯🇵👍.
Un très beau produit présenté ici et l eau doit rester bien chaude longtemps, fonte plus produit isolant thermique en es la preuve par l image
These are friggin beautiful. - sent from my inferior bath
They are beautiful
家業がタイル屋だったんだけど琺瑯の浴槽は重くて施工時もとても気を付けて取り付けるんだけど
高級感と保温力はピカイチなんだよね。鋳物で出来てたとは知らなかった。プレスして琺瑯加工するのだと
思ってたから、洗面台も琺瑯が多かったけど今じゃみんな樹脂製だから琺瑯はステータス。
古い家の時は琺瑯浴槽にしてたからお風呂最高でした。
É uma obra de arte!
👏🏻👏🏻👏🏻
Bravo!
Now that is craftmanship !!!
Absolutely beautiful!
Great
Excellence. Makes me want one !
Best of Best 👍
手間のかかる作業ですね。
I really like these videos except for the music. Just the sounds of the manufacturing process is good by itself.
The music makes it hard to watch.
مدهش
تسلمو
Amazing!
I'm surprised they are still being made. Fiberglass tubs and showers are so much easier to handle in construction.
And emanate cheap.
VERY NICE
Good to see Old Time quality Bath tubs being made in the same Old tradition way not
日本製造🎉
now i will take a bath
Solid build! What's the process that after the casting, the sand still remain separated rather than a solid block?
Compared to modern steel and acrylic bathtubs these are very heavy and hard to warm up, but after they gained heat they stay warm for much longer.
Nice thick enamel. Will last a lifetime.
浴槽を作るメーカーはいくつかあるけれど、これを施工できる職人がほとんどいない。
僕の家は未だに薪で風呂沸かしてるけれど20年前に風呂釜工事したときには既に職人は80代でした。弟子は居ませんでしたし、今の職人さんは風呂釜の設置をしたがらない。重いから。
施工できる職人はもういないよ 悲しいなぁ
Cool production.
Piano music not needed though.
8:34 You can see that arm got a little too enthusiastic a few times lol
to everyone who was wondering why it's so expensive?
well you have the answer in this video.
Completely off topic: I like the music.
Would be better without any music.
Das ist aber viel Aufwand für eine Badewanne. Haben Badewannen aus Stahl eine besondere Bedeutung?
This looks like advert rich people would watch. Factory pumping out fancy ass top quality state of the art product to please rich people. This is like Bentley of bathtubs
Nossa q trampo por que não fazem de fibra de vidro ,fibra de vidro faz até barcos .
Made to last. 500 years of guarantee.
Вот уж не думал что чугунные ванные так муторно производить.
This was a nice and interesting video but what's up with the Nutcracker music?🤔
想像以上に手作業が多い
A far cry from the Pakistani safety sandals...🤣🤣🤣
Довольно прикольно...!!!
Опаньки!
У меня такой ключ на 55 тоже есть!😂😂😂
0:00/0:33
👍素晴らしい・水回りにホウロウは最高です.プラスチック製はマイクロプラスチックの元。
I am truly curious about how their sand forms work, because it would seem like there's no chemical binding in the sand, which makes me question - how does it retain it's form?
It's called v-process. Vacuum holds the sand in shape. Rather like a brick of vacuum packed coffee. Just seems really odd compared to more conventional foundry techniques, but appears to work quite well.
@@aaronbaird3533 Thank you. I was going to ask the same question.
the plastic sheet they vacuum into the first part may be the spacer between the mold halves. when they pour in the cast iron it burns up . this would be like the lost foam method of casting?
So much work and material being used has to make this extremely expensive. Why make it of cast iron? I think pressed sheet metal with enamel is perfectly good.
I’m not aware of baths made out of sheet metal that’s pressed. There’s acrylic and fibreglass baths, as well as copper baths that are apparently forged into shape. It’s also probably cheaper to use an easily recreated sand cast mold than manufacturing a die that can be used more than once in a forging or pressing process. Cast iron is far easier to cast than steel, and would be more durable than a thinner sheet metal tub. I doubt this factory pumps out millions of tubs a year, but nonetheless I presume there’s a market for solid, durable bathtubs that won’t crack or bend.
почему ванна такая маленькая? как в ней лежать?))
The background music is called "concerto for a cast iron bathtub" by Bathtoven.
Steel, I suspect, not cast iron. Cast iron that thin would be very weak, and a PITA to try and enamel, whereas steel would be easier to handle, stronger, and easier to enamel.
👍👍👍👍
西日本豪雨の起きる2ヶ月前に親戚の工務店にユニットバスと洗面台をタカラスタンダードの製品で特注してもらった 壊した風呂もタカラスタンダートだった 壁もホーローなのでマグネット式の入れ物にシャンプーとか入れるのに入れ物6個くらい買った
機械にやらせれば良さそうなことを結構人間にやらせてるんですね。
おおおホーローって、こういうものなのか。名前は知ってるのに、よく分かってなかった。
金属にガラス、木に漆みたいな。
Is it me? Are those baths a bit on the small size? I take it they aren’t for lying down in?
Vrhunski kalitet
薄点的铁皮用模具冲压不可以吗 为什么要铸造呢?费时费力费料
8:44 Hot tub!
すごいです😍
チェック✅してるお兄さん、おじさんは絶対家🏠の🛀を掃除してもらったらめちゃめちゃきれい🤩になると思います🤭🤭🤭
Не думав що процес настільки складний
did not see the sprue get milled off. disappointed
The ( PPE suits ) are impressive ... ( ? ) .................. DAVE™🛑
Простите, а у вас такое оборудование было еще 190 лет назад?
タカラスタンダードかしら?🫢
もしかしてタカラ以外にもある?
タカラスタンダートに商品納入してるのが大和重工です
Cant see the PRICE
Cost what? As much as a small car?
🛁
Really interesting. Terrible choice of music.
タカラスタンダード以外にもホーロー浴槽作ってるとこあるの?っておもってちょっと調べてみたらこの会社はホーロー浴槽は全てタカラスタンダード向けにつくってる、というフェイスブックの投稿を見つけたのでそれが本当なら実質タカラスタンダードの浴槽ですね
嫁さんの実家がタカラスタンダード製のホーローのお風呂でしたが、
お湯に触れていない部分が冷たくて、うひゃあ!ってなりました。
こういう高級品はそんなことないのかな。
タカラスタンダード以外にもホーロー浴槽作ってるとこあるの?っておもってちょっと調べてみたらこの会社はホーロー浴槽は全てタカラスタンダード向けにつくってる、というフェイスブックの投稿を見つけたのでそれが本当なら実質これがタカラスタンダードの浴槽ですね
タカラはホーロー浴槽も磁気タイルの床も冷たいんですよねw
メーカーはお湯かければ保温効果もあり暖かい!!
と言うけど大事なのは冬場の第一歩目。
やっぱTOTOしか勝たんです
6:55 важная процедура, которую почему-то в моей совковой ванной не проделывали, в итоге пришлось при шлифовке и полировке эмали снимать меньше чем хотелось, для обновления. Тк проступили крапинки металла, хотя слой эмали еще был приличный.
Та и пену снаружи добавить как в видео, тоже было бы не лишним
совок у тебя в голове .эта ванна стоит как десять советских и безплатно их не ставили
@@kander3634 да нет, это именно совок натуральный. В цикле производства поставить одного шлифовальщика и лишить пару раз премии ОТКашника можно было бы, но зачем если и так народец покупает без конкуренции.
А кривые ножки на клиньях это вообще верх инженерного ума. Совок есть совок
@@belarus4790 какой один шлифовшик что ты несешь ,ты знаешь сколько ванн производили в СССР . и это все безплатно устанавливали в каждой квартире .во всм мире устанавливают кабинки .так как ванна это роскошь. у нас в четерех комнатной квартире подаренной СССР стояла отличнная ванна не хуже этой стоимостью 1800евро. так что не лезь туда куда голова не влазит!
@@kander3634 ну ты Василий канеш, оказывается с твоей логики шлифовщик на заводе - дорогое удовольствие, надо же. не успеет бедолана за литейщиками шлифовать) понятно, негоже народцу получать качественный товар, а крапки брака литься чугуна закроются тонким наплывом эмали) на прилавке не видно, да и кто это с прилавка ванну забирал, принимали что поставили с залитыми ножками в стяжку с кривущей плиткой
Квартиру тебе СССР подарил?)) ты ж понимаешь, что бесплатного ничего не было, ты платил привязкой к работе, и мечтой о японском магнитофоне и четерыхтактной хонде. Хотя, уверен, ты даже не знал в своё время что такое хонда.
В каком году подаренную квартиру приватизировал, василий?)
Во всем мире душ ставили))) ой, уася, забавный ты.