Mold Making And Resin Casting - How I Make Plastic Copies of My Toys
HTML-код
- Опубликовано: 23 авг 2024
- Here's how I make molds and plastic resin duplicates!
TIP JAR
paypal.me/stead...
PATREON
/ steadycraftin
MERCH
shop.crafnatio...
FACEBOOK
/ thecrafsman
INSTAGRAM
@steadycraftin
SUPPLIES USED: *
Mold Star 15 Silicone Rubber
amzn.to/2A3A6EN
Smooth Cast 65D
amzn.to/2IOMhYS
* As an Amazon Associate I earn from qualifying purchases.
Steady Craftin videos are made with the help of DIRECT SUPPORT:
www.patreon.com/steadycraftin
(You'll also get access to the printable 3D scans of my original sculpted figures, MP3s, exclusive behind-the-scenes videos, shop discounts, and more.)
My family and I are so grateful that I get to do this.
This guy is the Bob Ross of toy making.
and a distant cousin of Sniffle and Olly.
And here, we're gonna zig-zag a happy little cut.
nah he something else
My thoughts too! LOL Such a relaxing voice and soothing talk!
Sounds like that whispering old man outta Family Guy. But I love him!!
This is a great video! Thanks for using Smooth-On products!
SNAP! SMOOTH-ON! Glad y’all liked this! Thank you all for making quality products! Y’all cover the full range, bigtime!
I love you Smooth-On
Maybe you should send Crafsman some free products??? 😊. I know I will be buying your products from now on. If I want to copy a shape to make a mold of pretty 3D plaques which products should I use? I want to put it on the headboard of a bed.
Smooth On. I had never heard of your products until the CrafsMan featured them. (Aka free advertising) It would be great if you could send him a variety of your products to experiment with.
If Crafsman says Smooth-On is the best, that's enough for me.
Hey Crafsman,
As someone who works in the epoxy field I could give you some tips to help you while using epoxies/ silicones/ urethanes.
If you spray some mold release in your container and pull a little edge back you can blow some air between the container and the mold and pop it right out and reuse your container. This can work with things you have in a mold as well sometimes. When i do it i use the needle end people use to inflate basketballs to get the air in tight spots.
When trying to determine the amount of "epoxy" you need you can quickly and easily measure volume by pouring water in and filling your mold, then pour it out into a measuring cup and you know that if you have 1 cup of water to fill the mold then you need 1/2 cup A and 1/2 cup B when measuring by volume. Just be sure to add a little extra for the residual stuck in your cup from your mix.
Temperature and humidity affect the cure time of a lot of these 2 part systems. Typically the warmer and more humid the faster they react. Some of these systems are vastly accelerated with moisture.
You can tint epoxy systems with expensive dyes or pigments, but truth is if you have a clear or white epoxy system you can use most anything to get interesting colors. For some ideas you can check out Peter Brown on the youtubes. I sent him a bunch of pigments some years ago and he still is using some, but he has a great video from somewhat recently using all sorts of things to pigment his resin.
I hope this message finds you well, and keep making these great videos. If you ever have questions about epoxy type things feel free to drop me a line. I don't mind helping out if i can.
Outstanding, Ian! I appreciate this so much. Makes complete sense to use mold release to reuse the container. Those Ace hardware ones aren't cheap, so this will help. :D And that's an absolutely simple but powerful way to know how much resin to use to fill a mold! Just be sure it's good and dry before pouring, and you're set. I like it!
Man, thank you, as always!
Tip with the water is genius!
Great info, thanks!
www.napaonline.com/en/p/MSRA032MS Napa Auto Parts Paint mixing cups Quart. I use to work at NAPA and got these dirt cheap! Even still $.99 isn't bad.
I make my own silicone molds for soap making. I just do the math for volume.
For my rounds, I use PVC pipe with flat caps, and washed Pringles containers. Lol I personally think the cups are very intelligent.
For my squares, I make a box out of scrap wood I have laying around, or, out of cheap corrugated plastic, like an uncolored, white yard sale sign, sealed with packing tape.
I don't use any type of releasing agent. I've never had any sticking issues. I line my mold containers with freezer paper, wax side in, toward the silicone. I just pull the paper. It slides right out.
I don't color my molds anymore, but, I have in the past. I decided not to spend more money on the molds than I needed to. The color of the mold has no bearing on it's functionality. If you don't sell the molds, why spend more money on making them.?.?
11:53 “When y’all wasn’t looking I went over and drilled a lil hole” 🤣🤣🤣. Best tutorial voice ever!!!
Im so glad this popped up in my feed, I've had a very rough week and I needed this
It makes me glad to hear when one of my little videos can help someone out. I hope things go better for you, my man!
@@TheCrafsMan Thank you so much Crafsman, it means a lot that you are so frequent in the comments
same
Zack Likes To Ramble Be blessed. Wishing you a good week. Remember to rest on the sabbath-very rejuvenating.
When I found the channel literally felt the same lol
Dang! That's informational, instructional and entertainment. Man, I really appreciate you turnin me on to the silicone and plastic mixes. Your recommendation goes pretty far now that i watched you do it. Thanks, as always, dude. (P. S. - Really appreciate the image and sound quality, and that your overall content is of an observably higher level these days. Your videos have always been succinct and composed very well from a talent and subject matter perspective. More or less, I'm just sayin' most folk prolly might not but I see the difference and Im proud for you, your host the crafsman. ) cheers!
Jay, I may not have told you this yet, but I print out some of these comments, to hang up as "boosters" when I get to dragging and feeling a little down. Got me a little corkboard going, which I'm gonna have to upgrade to a bigger corkboard. I'm for real when I say your comments go a long way with me!
Well, shucks, brother. I might just print this one out! Its funny, my mama always said i expect too much out of people and dogs. what she means is i have learned and seen enough of this world that i dont get too willy-nilly with giving out compliments. but you keep your own integrity at a high standard. it shows in every video. so, yeah. ditto, amigo. keep on keepin it steady, crafsman. have s great weekend.
Y’all just warmed my heart!
Never change. This is my favorite RUclips production style that I've ever seen. You are an inspiration, sir.
This is a special channel
Every now and then, I find one. years apart this is special
This comment makes me happy. Thank you so much!
Filminger just perfectly expressed the emotion I was feeling but couldn't identify.
It's like, even if I didn't have any interest in what your content was, I feel like I would still watch it. It's extraordinarily hard to find videos that adequately educate beginners without making them feel like idiots, provide substance and pointers for your intermediates, all while not boring your experts to the point of seeking out the back button.
But every now and again, as mentioned above, something special happens. Non-aggressive, casually hilarious, thoroughly informative... Yeah, I'll be back. I feel blessed to be chosen as one of the knowing.
Now pardon me, I believe I have some new Smooth On products to purchase. Apparently, your particular breed of special are also a natural salesmen.
Craft on, my brother. +1 to Subs.
Yeah totally
I discovered this channel yesterday. I AM BLOWN AWAY! WOW. This is unbelievable, that's the type of content I wanted. I always wanted to make my own figures. And it's so peaceful to watch. Thank you
I'm so glad you took a chance on it! Thank you very much for watching!
Subscribed! I love the quiet feel of these videos!
So glad! Thank you!
So far in years of watching how to crafts on youtube, yours is BY FAR the most entertaining and instructive. I have used polyeurathane before and that flappy tab you ripped off the mold had me in stitches, your brain works as mine does. be proud and be free (range chicken) mr Crafstman steady crafter.. what do we call ya for short? craftmayn? I LOVEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE YOUUU
Ol' OneSpaceman back in the mix! Thanks so much for checking this out and commenting! I appreciate you, man!
I have been watching videos on RUclips for a decade and have never subscribed or liked anything until today.
Thanks for making this channel; this is what I didn’t know I needed in my life.
Wow. Thank you SO much, Nicole!
Your channel if brilliant. A perfect synthesis of intelligible instruction and subtle, engaging humor. Please keep up the amazing work.
That's so very kind of you and super encouraging! Thanks so much!
You brighten my day Crafsman! Thank you again.
Makes me glad to hear that! Thank YOU for keepin on watching!
I love the very calm tutorial, it’s like the Craftman is working a two in the morning and doesn’t want to wake anyone…but I hear birds so maybe he’s just very soothing to watch!
Well i wasn't expecting this to be hosted by a puppet. But he's smart, charming, and knows exactly what he's doing
"PSHEWWWWW- OH I hit my light!"
Hahahaha that made me laugh because at first I thought it was on purpose since the little chicken looks so ready for adventure
LOL! I legit flew the chicken right into the china ball. Decided to just keep it in the video. :D
Sir I just wanna say thank you I’ve been searching for days upon days how to make a pvc or resin statue I’ve had a dream of toy making and anime statue making since I was 9 Now that I’ve actually found someone that made such a great tutorial I can go out tomorrow and start this project for my first time you have helped me take that first step thank you
Wow. This means so much to me, that one of my videos has helped you in that way. I hope you have success with your toy-making adventures!
I swear out of all the diy content I watch this guy's videos are always a treat.
People have no idea the treasures they're missing out on here. Love you CrafsMan!
There’s so many good tips in the comments, I like that he tried some of them and replied to his comments which is awesome in growing a channel.
Protect this man at all costs
:) Thank you! Some of y'all are so nice!
The figure came out really nice, and it's cool to have the jetpack be removable. Very nice job!
Thank you so much! :D
Everything about this video and this gentleman is completely charming and heartwarming.
This is the first time I've never skipped a tutorial
Thank you for the joyful and hugely helpful video. Love you x
Thank you so much! It means a lot reading stuff like this.
Dudes like the African American Bob Ross! That calming voice hypnotized me into watching the entire thing. Love the vid and thanx for the great tips man.
Glad you enjoyed it, Ted!
Just discovering your channel... where have you been all my life ! Love how you do. Thanks for bringin happy around.
Mannn, this is so encouraging. Thank you for checking out my channel, and leaving some good words!
I wrote comment 3 years ago and I'm back to watch again, laugh and relax. Thank you.
Channels like this is why I love youtube.
Wow. Thank you so much for that!
Just found your channel yesterday with Pt. 1 of this video. As an Illustrator looking to make my own toys, this is incredibly helpful and inspiring. Love your sense of humor man, keep killin' it with such great content!
Excellent! Thank you so much for the feedback and for watching! I hope you do get to turn some of your illustrations into 3D models!
I love your videos. When I have a bad day I just watch your videos and immediately I feel better from the things you teach me how to do😁. And thanks especially for this video and the previous ones, I should try to make these as Christmas gifts for my cousins.
It's so nice for me to read things like this! Thank you for taking time to leave me some positive words!
Hello, dear Friend
Have a nice day!How are you recently?
we can print small prototype or large scaled 3d models and create high benefits for you if you are interested!
Yours Truely!
Zheng Zhao
SLA,SLM,SLS,MJF,FDM 3D Printing&Resin casting&Vaccum casting&CNC&Die casting
Web:www.galaxy3dm.com
Email：zhengzhao@galaxy3dm.com
www.tiktok.com/@galaxy3dmfactory
www.artstation.com/zhaozheng1
ruclips.net/channel/UCkbg5b-vHvCYSENLw8acEQA
ruclips.net/video/-CCbOm3-8QY/видео.html
ruclips.net/video/1MiEyZIWnJM/видео.html
ruclips.net/video/fdFAMMi8K4E/видео.html
You're a lifesaver! I just called the smooth on around the corner from me. I never knew what they did. They said there are technicians there that can also help me with my project ... thanks so much for this video I've been trying out a way to make figurines for days.
This guy has been blessed with such an amazing voice. I can sit and listen to him all day!
I love this channel so much i don’t even skip the ads 😂
Awww, Tamara... I appreciate you!
Don’t think you’ll see this but I’m currently working on making toys for a project here and have no idea what I’m doing but this video or and the previous one are so helpful. Definitely going to use those same products because that looks pretty straightforward on how to use them
Anyone else love The CrafsMan's commentary? His voice reminds me of a Gambit.
You inspired me to start making sketches instead of thinking about making sketches! You're the best Crafsman
YESSSS! That's what I'm talking about, Sean! Glad to hear it! :D
Has "Willow" VHS on shelf; For that alone, you are a god among men, sir, and keep up the good work.
My man, Eric! Thanks so much! Glad any time I hear from another Willow fan. ;)
YES!! I needed this today! I lost my job, the weather is bad, my bird pooped on me, dog has fleas, and I broke my TOE.
The big one.
But I've been waiting on part 2 and here it is! Free range chicken is looking good. I love how the rubber hose turned out, it adds a lot of character.
Your little characters always make me smile.
Man, Tom! I hope half of that did not really happen! Well... I would like to think all of that did not happen. But I greatly appreciate your enthusiasm for my videos! :) Hang in there, my friend!
Hey Crafsman, I don't do much crafting but I always watch your videos, They are just so doggone relaxing. and your subtle humor is is the icing on the cake. Thanks for the time you put into your work...
Comments like this really do my heart good! Thank you!
If Bob Ross, Jim Henson, and Ludacris had a Luv Child= TheCrafsman.
I was thinking Bob Ross, Bill Cosby, with a pinch of Snoop Dog and a dash of Matthew McConaughey 🤣
@@the_radiant_patriot nailed it
LMBO
....and a dash of Mitch Hedberg perhaps
This is a creole or Cajun guy,
Really loving your videos, super informative and makes me feel like I can actually do this! Thanks for taking it slow and steady!
SO glad! Thank you for watching! And you CAN do this! :)
I love this man, I love you designs. I love your attitude, I love your voice, I love your vernacular. I wish you had your own crafting show, I'd watch it every. single. DAY. Keep doing this amazing content sir
Brian, this means so much to me. Thank you!
I can't wait to purchase a free range chicken. I don't eat meat so anything poking fun at free range is perfect.
Do you know how much you're going to sell them for?@@TheCrafsMan
Oh snap, its the Free Range chicken squad!
LOL! For real. Someone else called them "Spaceclucks". I thought that was funny too.
FIGHT FOR FREE RANGE CHICKENS THEY DESERVE RIGHTS TO!!!!!! Lol
TheCrafsMan SteadyCraftin lol
Free ranged chickens rule!!!
Yay! Another CrafsMan video!!! Thank you for all of your creative ideas!!!💜
P.S. I get discombobulated sometimes too!
Thanks so much! And I'm glad I ain't the only one with that problem. LOL!
I’ve done the same exact mold process as what you just did when I was working as dental technician. I always knew it was possible to use the material to make molds of toys. Your video proves it.
I would hire you to read bed time stories to me when I'm having trouble sleeping. Thanks for the tutorial.
I can make action figures of my floral foam molds now!
Thanks, man - you're the best :D
CrafsMan, you made me a Patreon supporter. Thank you brother!!
THANK YOU SOOOOOO MUCH for that! Really means a lot to me!
I've watched this for the 10th time. I keep falling asleep from your voice.
I am SOOO grateful to the universe for letting me discover your channel. It came exactly at the right time in my life/art journey. I'll probably watch all of your videos.
Wow. So glad you found my channel! :D Thank you for watching, and for the encouraging words! Please KEEP ON with your journey! :D
Best show on RUclips
SNAP! Thank you!
First timer here.That was strangely relaxing.Have a sub.
I just found you and I am so happy I did. I could watch your videos all day I can’t get enough of your voice
Well I’m glad you found my channel too! Thanks so much for your kind words! :D
YES! A day with the Craftman is a GOOD day!
Thank you, my man!
The CrafsMan's wife be in the next room like, "betta not wake them kids!!!"
Proceeds to make video.
When I turn the captions on, it has you say, “My name is your host, the crass man.” Don’t worry, though. We know you’re not a crass man. You’re the CrafsMan.
LOL! Mercy! These captions are cracking me up now. I don't know if I need to talk more clearly or what. :)
Hi Crafsman! I don't how I found your channel but I'm so glad I did. I had very little interest in crafts before but now you've inspired me to try my hand at making some cartoon figures out of sculpting epoxy. I bought through your Amazon link and thanks to same-day shipping I hope to be starting as soon as tonight. I watched most of your videos with my wife and two kids yesterday and now we're all fans. We love your humor, positive outlook on like and relaxing style. Thanks for being you! Please keep making videos and crafts and we'll keep watching. We wish you all the best!
Oh man, Matt! I'm so grateful for people like you finding my work. The kindness is well appreciated, sir. I hope you and your family continue to enjoy my videos! Thanks so much for your consideration. These comments cancel out the negative ones I get. All the best to you guys!
You're the first RUclipsr I've seen telling folks to have an extra mold for the excess
I'm done laying eggs. I'm about war. I'm outta here.
Hey Crafsman, can you do a video on how you paint them things?
I might even do that! The next one I had in mind was about DIY packaging, for anyone interested in packaging their figures (or whatever goodies they may sell). :)
I needed this. Your voice, humour and talent helped make a tuff day better. Thank you
SO happy to hear that, Karen! Thank you for taking time to leave wonderful feedback.
This guy needs to be a nighttime radio dj. His voice is awesome.
Wow, Tim. Thanks so much for the kind words.
11:46 - Oddworld: Abe's Oddysee reference!
“Follow me”
“-Ok”
:D
Anybody else feel like we’re eavesdropping on his process? 😂
I use to do some molding and casting years ago. That moment as the resin hardens is truly exhilarating. Like magic.
Crafsman, you are so calm and thus so calming man...you yourself are Smooth-on. That's what I think. Thank you for that.
Amazing dude! the craftman voice is the best! xD
Glad you think so! Thanks so much for watching!
Love the video, so much fun. Might give this a try in the future. Stay crafting my brother.
Thank you for the encouragement! I take it to heart!
Every time I hear craftsman voice it's coming and peacefull
My day was not going well but crafsman came along and just took it all away
SNAP! So, so glad to hear that!
"You gotta haul butt! - - - excuse me, what I said..."
You're awesome lol
LOL! Glad you enjoyed it! Thank you for watching!
Another detailed educational video! Thank you, my friend! I was also nervous for a second thinking there will not be enough silicone 😊 Love your solution for the find-your-way cup 😁 Those sponsors should start pouring in. I'm awaiting "this video is made in a collaboration with #somegreasysponsor " 😎
:D Thanks so much, sibenka! I always appreciate your comments! I've been contacted over email by a few different ones, but really... if it's not something I think y'all could use, then I have to politely turn it down. I could have had some free different tools and chemicals, but y'all probably don't really need space-age dry electrostatic lubricant products. (That's just one.) One of the other ones seemed too dangerous to be doing a video about.
@@TheCrafsMan 😁 you are welcome! I don't even know what that means😂 Thank you for thinking on us! You are a good soul. I hope you will be able to monetize your effort. 😎
At first i hated your voice cause your all ways whispering but now i can't stop watching your videos cause i find it so relaxing and helpful when i make my sculpture
I can't wait to buy a free range chicken from your Etsy shop! And to try these products.
Thank you so much, my friend! Hope to record your MP3 today! :)
So *this* is what Snoop Dogg has been doing lately......Snoop Lion. DJ Snoopzilla. And now Snoop D-O double G Puppet. I dig it.
Fo' shizzle dizzle
Omg-- *Come On!* at 10:08 he starts to reallly sound like Snoop, talking about a knick knack, jet pack patty wack. Like if you hear the resemblance haha 😂
Lol!!
Awesome video as always. I've looked at many videos about silicone moulds and casting yet I always get bored halfway through, but not with you. I laughed so loudly at your "hauling ass" comment. I'm so happy you're enjoying making these videos for us, I very much look forward to and get so excited when I get my emails telling me you've made a post/video! Happy crafting CrafsMan ❤️
KELLY HIGGINS! Thank you for keepin' on watching my little videos! I appreciate you so much! :D
hahaha i just recently found ur channel. youre funny man love ur vids keep up the awesome work! love the free range chicken lol they look funky :3
Thank you so much!
Just became a patron. Please let us know if you put the Free Range Chicken up on Etsy! Or/also Aqua?
MY MAN! Thank you so much! I'm aiming for about two weeks to have the chickens up, and may also pour up some more of my other figures. :D Again, can't thank you enough!
im not even going to lie.... that hand puppet is the best.
Glad you enjoyed that! :D
So I was having a rough night the other night and couldn't sleep. Popped on some youtube and this came up in my recs. It's like Crafsman knew I was frustrated about it cause his dulcet tones sent me straight to sleep! Of course the next day I came back and rewatched the video and subbed. Thank you Crafsman, keep up the awesome work
Wow. Thank you so much for the super kind words. Knowing I'm able to help someone else is a big deal to me. :)
@@TheCrafsMan No problem at all my dude
OMG living in Australia sucks! You can't purchase of these products here. Also, great video.
Your amazing! I love the way you speak, but, you give yourself away quite often. I haven't figured out if you are highly educated, or a brilliant self educator. 🤔 Either way... I see you. 😁💗 Your an incredible artist. Thank you so much for sharing.
Ooooohhhhhh snap! ;) That does my heart good....to have somebody thinking I'm highly educated.
@@TheCrafsMan Educated doesn't, always, mean schooled. The most intelligent person, I know, never made it through the 7th grade. He did, however, self educate, and, continues to do so. He, also, owns one of the largest international architectural firms in the world.
Weather you have been schooled, or, are self taught, you are a very intelligent, educated person. Uhuh, I see you. 😀
Things I like; Your soothing (Bob Ross type) voice. The diversity of your videos. Mentioning your wife and family. Teaching. Sharing nice things. I hope, and pray, you never change this. 💗 Oh and rain on a tin roof. 😁
I think I have found my absolute favorite channel ever. I'm loving this content!
Wow. Thank you so much for watching! Very glad you enjoy this. :D
I think your videos are the best thing on RUclips! Keep on Crafsman!
Aww snap, Wade! Thank you so much for the support!
It's like Snoop Dog teachin' me how to Arts and Craft. I love it! Thanks for your explanations, they helped. I laughed so hard at the "conglomeration" haha!
Good morning Craftsman...I'm new....I just wanted to say that I've been binge watching your videos and I have had a blast watching ..thank you for sharing your creative mind with me.
SO glad to hear that you like my videos! Thank you for watching them, and taking time to leave this very nice comment!
I love, love, love this character. The voice makes it seem so kind!!
Thank you so much!
I’m gonna use this tutorial to make a replacement piece for my expensive glasses. I was told to buy new frames, but this will surely do the trick and save me a pretty penny.
I really enjoyed watching your video! You are very knowledgeable and fun to see in action. Your accent/voice are great too.
You’re the bob ross of our present!!! I love you, you’re awesome!!!
Awww, thank you!
Excellent demonstration. Sometimes too quick mean "Learn nothing" You explained it very well
I appreciate that so much!
You pulled the Newks cup out and I knew exactly where you were XD These are the BEST videos.
:D :D :D Mannnnnnn, I like Newk's! Thanks so much for watching my videos, and for the great comment!
The last video I didn't get a Patreon notification for but this one I did so I'm really glad.
Once you put these on sale, you can bet I'll be buying one.
I really appreciate that!
Your videos always seem to make me happy when I’m feeling down and stressed, thank you Craftsman sir!
It does my heart good to know this! Thank you!
I just found your channel Craftman and I’m hooked, can’t stop watching and I love it!
I'm so glad you're enjoying my videos! Thanks so much for watching!
Sir I gotta say, your voice is very soothing!
Ah snap, this the type of quality content I been lookin for! Love your videos Mr Crafsman! You're the coolest!
So glad to hear that! :D Thank you!
Excellent demonstration and explanation. A perfect guide to mold making.
The commentary is hilarious & this was extremely educational. Very helpful, thank you for making me laugh while teaching me something.
All I can say is Wow wow wow! They are amazing!
Thank you so much!!