I am having the same issue where most of the snaps just won't "snap". Then... How to remove useless snap!!! I'm frustrated but not defeated. I will try stretching the fabric like you showed. Thank you very much for this video. 😊🇨🇦
Thanks for taking the time to leave a comment. If you could support by subscribing, it would be very much appreciated. Happy snapping and happy new year 😀
I am Screaming Thank you! I am a crocheted and for a lot of my baby clothes I hate to put button between the legs. As a mother I think it is easier to use the snaps. I purchased this device about a month ago. Didn’t have time to use it. I thought it was going to be one two three. Oh my No! I watched several videos and I was still confused. I was on my way to send it back. Totally discussed! But I watched a video that didn’t help. As I was re-boxing the device to send it back your video came on. At first I didn’t pay attention until midways through your video it was something you said that made me stop and listen. I wanted to cry! Your video was so helpful and I am so grateful. Thank you and yes I subscribed to your channel!
Wohoo! Delighted to hear this video helped. Thank you so much for the sub. Hoping to get back into the routine of putting out a weekly video again soon 😄
Just found your channel and love it. Great to hear the irish accent. I'm irish too, from Sligo. Great tips on using the snaps. I have liked and subscribed
Yeay, thank you so much for your support ☺️ Apologies for the delay in responding, pregnancy exhaustion. Hoping to upload new videos again after the summer break 😄
Great video, exactly the tutorial I needed with the same tool as mine! Thank you for making this so easy. Not sure why I hadn't tried adding snaps to things before but I am definitely going to be using them a lot more now! :)
Wohoo. Hopefully you’ll love it as much as I do. I’ve been adding snaps to everything. So handy for even keeping things like gloves etc together. I’m addicted to my Kam snaps 😂
Thank you for watching & taking the time to leave a comment. Can I ask what you use your KAM snaps for? I love them. I just added them to my laptop sleeve handles so that I can snap them out of the way when the handles aren’t needed.
Thank you so much for letting me know. Not sure what happened. Here is a working link to an identical looking set to what I have & high ratings. Have fun adding snaps to everything 😁 amzn.to/3amf1Kt
I made a wallet for masks and put two of these snaps on both corners but when adding the last snap,it kept falling off as that section was thicker than the other corners so really struggled to get them to click in on one corner so going to try your method x
Thanks for taking the time to leave such a kind comment. If you could support by subscribing, it would be very much appreciated. Happy snapping and happy new year 😀
@@MamaBanana I've been snap happy today because of your very informative video. The kit instructions were a bit blurry to read so I jumped on to RUclips. So far I've finished off some CSP products and a couple of wet bags (that I would normally velcro fasten.)
Thank you! I've been looking for such buttons and tools but the results are pretty much all on Amazon and/or made in China, the 2 things I wanted to avoid. By your accent, I'm guessing you're Irish too? If so would you happen to know of anywhere else I can buy them, particularly a good tool that isn't made in PRC? I'm not finding any in Hickey's or similar shops. (I found some buttons from Honk Kong which is fine for me and there's a Taiwan site which have the press pliers tool but it's mainly for bulk orders)
Hi? Bang on, I’m Irish ☘️ 😊 I got the hand held presses on Amazon. But I got the heavy duty table press from www.dimples-dogbandanas.com/shop/, a pet accessories shop based in Ireland. So random! I just checked though & unfortunately don’t see any hobby accessories for sale here anymore 😞
Hi, it will depend on the thickness of the satin. A good quality double layer maybe fine. But I would recommend sandwiching a small scrap piece of fabric between the two satin layers before adding the snap, just to help prevent the fabric from ripping over time. Hope this helps.
I used my snap tool for the first time today. I managed to figure it out, but I appreciated your tips and tricks for the next time. I DO have a problem, however. My project was a little 2-layer cotton credit card case. The snap is so tight now that it’s installed, I have to use a flat screwdriver tip to pry it open. Obviously that’s not how it’s supposed to work! Any idea what the problem is? I’m sure that if I just try to pull it apart, I’m going to rip the fabric. Thanks for whatever help you or anybody else has to offer.
So sorry your comment got missed. As the fabric is so thin it would need something to give it more thickness. Ideally maybe try interfacing the fabric with an iron on fabric. Otherwise, remove the snap, then cut a circle of fabric bigger than the snap, then reattach the snap, sandwiching the circle in-between. Sorry again about the delayed response. Thanks for watching, happy New year 🥳
Yes! From Dublin. Are you from Ireland too? So glad you found this helpful. I’ll actually be reviewing another KAM product in my next video. Just trying to find time to edit 😄
Snap makes a snapping sound when I pull them apart, but doesn't make that snapping sound when I snap them together. Is it supposed to be like that? Or, did I install the snaps incorrectly?
I’m having trouble with them & I keep mixing up the male & female bits. I realise mine don’t look like yours or other people’s I’ve seen. Has the design changed. I’m tearing my hair out with them.
Hi, All the designs of these are pretty similar. The one with the post sticking out is a male piece. The one with a dimple or hole is the female piece. The male piece with the post fits into the dimple in the female part. Hope that helps a bit.
Mmmmm I’ve come across many Kam snaps over the years, they all follow the same male & female style, so this is strange. Just to confirm, your snaps are plastic?
Hi Just to say I’ve worked it out. I’m using size 14 & I looked on the website & saw that the snaps below size 20 have different female parts. Thanks for your help.
It’s hard to tell. Maybe the stud or centre part of the snap is sticking out too much, stopping it from closing? I wish there was a feature in YT to share photos.
Hi, do you have a staple remover? If so try this technique. But you can also try cracking the plastic to remove by crushing with pliers. ruclips.net/video/fXU8OgEkTOo/видео.html
Hi, Can you confirm if one is male & the other female? Also has the stem (middle part) been fully flattened down the middle?Also have any of the parts aside from the middle stem been squished? If any other part has been squished down, then unfortunately they will not fit together.
@@MamaBanana yes, definitely the same pieces you had, but both pieces still had the stalks in the middle! That's where it's going wrong! I'll try again lol thank you
Am I the only one having problems with these snap buttons? Got mine on amazon the male button stays on the female comes off and stays attached the the male part, no matter how hard I squeeze it always comes off, I suspect that the plastic pin is too short so there is not enough plastic to squish. I am so frustrated I keep on wasting so many
Oh sorry. How can I help? The process for male & female snap installation should be the same. Do let me know what your query is though & I’ll do my best to help.
I bought mine on Amazon www.amazon.co.uk/dp/B00L0XJHLE/ref=as_li_qf_asin_il_tl?ie=UTF8&linkCode=gs2&linkId=4e714ac20308ca2222353d81e28374b6&creativeASIN=B00L0XJHLE&tag=mamabanana03-21&creative=9325
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Using this to help my daughter make clothes for her dolls. She is loving it! Thanks so much.
Oh yeay. That sounds like fun for all. So happy your found my video useful ☺️
I just ordered the metal one for dresses i made for dolls. Can't wait to try it when it arrives today.
Thanks a mil! I’ve been messing around with these for ages and you wouldn’t believe the mess I’ve made! I’m going to put snaps on everything now!!! 😄
Thank you so much!! I was having like a50% success rate with my snaps. Half wouldn't click closed. These tips really help!!
Thank you so much for taking the time to leave a comment. Delighted my tips helped. Adding snaps to stuff can be so much fun.
Happy snapping ☺️
I am having the same issue where most of the snaps just won't "snap". Then... How to remove useless snap!!! I'm frustrated but not defeated. I will try stretching the fabric like you showed. Thank you very much for this video. 😊🇨🇦
@denisekay4292 it’s so frustrating when that happens.
Hopefully keeping the fabric taut helps resolve the issue for you.
Good luck 😄
@@MamaBanana thank you! Silver linings... I found a good video on how to remove plastic snaps with a staple remover. LoL
@denisekay4292 😉 ☺️
I have just ordered one of the guns and your tutorial has made it look so easy. I can’t wait to try it when it arrives tomorrow 😁😁
Thanks for taking the time to leave a comment.
If you could support by subscribing, it would be very much appreciated.
Happy snapping and happy new year 😀
I am Screaming Thank you! I am a crocheted and for a lot of my baby clothes I hate to put button between the legs. As a mother I think it is easier to use the snaps. I purchased this device about a month ago. Didn’t have time to use it. I thought it was going to be one two three. Oh my No! I watched several videos and I was still confused. I was on my way to send it back. Totally discussed! But I watched a video that didn’t help. As I was re-boxing the device to send it back your video came on. At first I didn’t pay attention until midways through your video it was something you said that made me stop and listen. I wanted to cry! Your video was so helpful and I am so grateful. Thank you and yes I subscribed to your channel!
Wohoo! Delighted to hear this video helped. Thank you so much for the sub. Hoping to get back into the routine of putting out a weekly video again soon 😄
Thank you! Clear instructions and now I know how to add these.
Yeay. Happy snapping. It’s sooo much fun 😄
This is a really great how to video! It was exactly what I was looking for. Thanks so much!
Thank you so much for taking the time to leave a comment. Much appreciated 😄
Brilliant tutorial Mama Banana I received my kit today and now I will give it a go I have liked and subscribed
Thank you so much for your support. Have fun with your new KAM snaps 😊
Wow! Thank you sooooo much! I had the wrong cup on mine. Your tips sure did make me able to install each snap perfectly! Just did 5 snaps!
Whoop whoop. You’ll be hooked soon enough & looking for more things to put snaps on. They are so handy 😄
This was so helpful! Thank you!
Hi, thanks for your video, you explained how to use the snap button easy to understand, Now for me to try ? Ger South Wales x
Thanks Ger. Hope it went well for you. I love adding Kam snaps to stuff, makes them so much more functional for me.
Happy snapping 😄
Thank you great video, straight to the point, we'll lit, can easily see and hear what you are sharing.
Just found your channel and love it. Great to hear the irish accent. I'm irish too, from Sligo. Great tips on using the snaps. I have liked and subscribed
Yeay, thank you so much for your support ☺️
Apologies for the delay in responding, pregnancy exhaustion. Hoping to upload new videos again after the summer break 😄
it’s an irish accent! i was wondering about that but didn’t recognize
Thank you so very much. I will try your way and see if f I can better add my snaps.
Great video, exactly the tutorial I needed with the same tool as mine! Thank you for making this so easy. Not sure why I hadn't tried adding snaps to things before but I am definitely going to be using them a lot more now! :)
Wohoo. Hopefully you’ll love it as much as I do. I’ve been adding snaps to everything. So handy for even keeping things like gloves etc together. I’m addicted to my Kam snaps 😂
Thank you so much I was so lost and you explain everything so well I had seen other videos and was still confused
Aw thank you so much for your kind comment. So glad this helped you 😄
I just started making vinyl wallet. Thanks for the tips 😀
The first time I did this I crushed the plastic beyond recognition, lol. But these are great tips. :D
Thanks. I had tried crushing with pliers too. But can be hit & miss with how well it works. So happy you found the tips helpful 😀
I'm so glad to have now learned all these things before I try! Thanks for possibly saving me from doing the same
Just what i needed! Thanks
Yeay, delighted you found this video helpful.
What do you use your KAM snaps for?
Great instructions. Thank you so much for sharing
Thank you for watching & taking the time to leave a comment.
Can I ask what you use your KAM snaps for? I love them. I just added them to my laptop sleeve handles so that I can snap them out of the way when the handles aren’t needed.
I’m inspired ! Very good Shan. Been ages since I’d seen you or Susan lol 😆
Aw thanks. I know, it’s been YEARS! how are you keeping? 🤗
Mama Banana ah you know the usual have a kid and keep busy in work lol
I didn’t know you had a kid. How old ah?
Mama Banana she is 5years old, Caitlin
Thank you! Great video!
The uk Amazon links don’t work? Do you have names for the product? Thanks.
Thank you so much for letting me know. Not sure what happened. Here is a working link to an identical looking set to what I have & high ratings.
Have fun adding snaps to everything 😁
amzn.to/3amf1Kt
It’s was very useful for me
Aww thanks for taking the time to leave a comment. Have fun adding snaps 😄
I made a wallet for masks and put two of these snaps on both corners but when adding the last snap,it kept falling off as that section was thicker than the other corners so really struggled to get them to click in on one corner so going to try your method x
Your method worked thank you ♥️
Whoop whoop 🙌
I’ll be posting more crafty videos this month, make sure to subscribe so you don’t miss them. Would really appreciate the support too ☺️
thanks for the tutorial!
Awesome ❣️
Thank you for sharing
So happy you got something out of it. Thank you for taking the time to leave a comment 😊
Very helpful!!
Thanks for taking the time to leave such a kind comment.
If you could support by subscribing, it would be very much appreciated.
Happy snapping and happy new year 😀
Very helpful. Thank you
Thank you so much for taking the time to leave a comment. Always appreciated. Enjoy, I love adding snaps to whatever I can 😀
@@MamaBanana I've been snap happy today because of your very informative video. The kit instructions were a bit blurry to read so I jumped on to RUclips. So far I've finished off some CSP products and a couple of wet bags (that I would normally velcro fasten.)
Delighted to hear. Snaps would probably be better for a wet bag as it won’t snag on anything. Great idea!
Thank you!
I've been looking for such buttons and tools but the results are pretty much all on Amazon and/or made in China, the 2 things I wanted to avoid.
By your accent, I'm guessing you're Irish too? If so would you happen to know of anywhere else I can buy them, particularly a good tool that isn't made in PRC? I'm not finding any in Hickey's or similar shops.
(I found some buttons from Honk Kong which is fine for me and there's a Taiwan site which have the press pliers tool but it's mainly for bulk orders)
Hi?
Bang on, I’m Irish ☘️ 😊
I got the hand held presses on Amazon. But I got the heavy duty table press from www.dimples-dogbandanas.com/shop/, a pet accessories shop based in Ireland. So random! I just checked though & unfortunately don’t see any hobby accessories for sale here anymore 😞
such a nice tips , thankyou
Thank you so much for taking the time to leave a comment. I love my KAM snaps.
Are these snap buttons good satin fabric?
Hi, it will depend on the thickness of the satin. A good quality double layer maybe fine. But I would recommend sandwiching a small scrap piece of fabric between the two satin layers before adding the snap, just to help prevent the fabric from ripping over time. Hope this helps.
@@MamaBanana Thank you for responding so quickly. Great idea.
I used my snap tool for the first time today. I managed to figure it out, but I appreciated your tips and tricks for the next time. I DO have a problem, however. My project was a little 2-layer cotton credit card case. The snap is so tight now that it’s installed, I have to use a flat screwdriver tip to pry it open. Obviously that’s not how it’s supposed to work! Any idea what the problem is? I’m sure that if I just try to pull it apart, I’m going to rip the fabric. Thanks for whatever help you or anybody else has to offer.
So sorry your comment got missed.
As the fabric is so thin it would need something to give it more thickness. Ideally maybe try interfacing the fabric with an iron on fabric. Otherwise, remove the snap, then cut a circle of fabric bigger than the snap, then reattach the snap, sandwiching the circle in-between.
Sorry again about the delayed response.
Thanks for watching, happy New year 🥳
Are you from Ireland? Thank you for this I couldn’t read Chinese instructions.
Yes! From Dublin. Are you from Ireland too?
So glad you found this helpful. I’ll actually be reviewing another KAM product in my next video. Just trying to find time to edit 😄
Thanks!
You’re so welcome 😉
Can you use these snap buttons on wool garments ??
I have used them on some made by granny knits 🧶. But would need to be a close knit.
@@MamaBanana thank you for quick reply , I've just ordered a set lol .x
Wohoo. Let me know if you’ve any questions. I love my KAM snaps, they are my most frequently used snaps for projects.
@@MamaBanana thanks hun will bare that in mind xxxx
No worries 😉
Snap makes a snapping sound when I pull them apart, but doesn't make that snapping sound when I snap them together. Is it supposed to be like that? Or, did I install the snaps incorrectly?
So long as the snap stays secure after you pull them apart then it should be fine.
Apologies for the delay in responding, pregnancy exhaustion 🥱
@@MamaBanana- Thanks! I figured it out. Hope your pregnancy exhaustion gets better soon.
Great mam
Thank you for your kind comment ☺️
I’m having trouble with them & I keep mixing up the male & female bits. I realise mine don’t look like yours or other people’s I’ve seen. Has the design changed. I’m tearing my hair out with them.
Hi,
All the designs of these are pretty similar. The one with the post sticking out is a male piece. The one with a dimple or hole is the female piece. The male piece with the post fits into the dimple in the female part. Hope that helps a bit.
@@MamaBanana Yes thanks it’s just that the female one looks different to yours. Yours looks different to mine. I can’t attach a photo.
Mmmmm I’ve come across many Kam snaps over the years, they all follow the same male & female style, so this is strange. Just to confirm, your snaps are plastic?
@@MamaBanana Yes & I got them from an authorised stockist. It’s hard to tell the difference between the two parts. Yours look much better.
Hi Just to say I’ve worked it out. I’m using size 14 & I looked on the website & saw that the snaps below size 20 have different female parts. Thanks for your help.
Hi after i press the foot the button not able to close properly , what problem in that i cant understand , pls reply me
It’s hard to tell. Maybe the stud or centre part of the snap is sticking out too much, stopping it from closing? I wish there was a feature in YT to share photos.
Thx
I can’t snap the buttons together, there’s a bit of plastic protruding on both insides. How do I remove these?
Hi, do you have a staple remover? If so try this technique. But you can also try cracking the plastic to remove by crushing with pliers.
ruclips.net/video/fXU8OgEkTOo/видео.html
@@MamaBanana thank you so much! I pressed the pliers with full strength and it seemed to do the trick😅🤣
Wohoo 🥳. Glad you got it sorted. Can be a pain to remove.
I still have both spokes on my snappers so they won't join! Where am I going wrong?
Hi,
Can you confirm if one is male & the other female? Also has the stem (middle part) been fully flattened down the middle?Also have any of the parts aside from the middle stem been squished? If any other part has been squished down, then unfortunately they will not fit together.
@@MamaBanana yes, definitely the same pieces you had, but both pieces still had the stalks in the middle! That's where it's going wrong! I'll try again lol thank you
Wohoo. Hope you got it sorted now. Happy snapping ❤️
@@MamaBanana I didn't have the correct tool, I ordered one & it's now going perfect. Thank you
Wohoo 🎉
Hope you have as much fun as I do adding snaps to everything 😁
Usted los vende
Sorry, I don't sell these. Did you buy the KAM tool set?
Muy bien quiero uno
I love my KAM snap set. It’s great. You should totally get a set 😊
Am I the only one having problems with these snap buttons? Got mine on amazon the male button stays on the female comes off and stays attached the the male part, no matter how hard I squeeze it always comes off, I suspect that the plastic pin is too short so there is not enough plastic to squish. I am so frustrated I keep on wasting so many
हिन्दी में बताएंगे तो बहुत ही धन्यवाद होगा जी
I am not a mama but thank you
You’re so welcome 😉.
Hi your male and female buttons weren't in focus. Can you please help please
Oh sorry. How can I help? The process for male & female snap installation should be the same. Do let me know what your query is though & I’ll do my best to help.
Cómo puedo comprar uno
I bought mine on Amazon www.amazon.co.uk/dp/B00L0XJHLE/ref=as_li_qf_asin_il_tl?ie=UTF8&linkCode=gs2&linkId=4e714ac20308ca2222353d81e28374b6&creativeASIN=B00L0XJHLE&tag=mamabanana03-21&creative=9325
ebay
I did not have add. & prises of the machinm
Hi, do you have any questions on how to use the KAM snaps & tool?
hate the music ...