I greatly appreciate the pace and clarity of the video. Best I have seen on the subject. It was easy to see what was going in. And it was paced in such a way, that it was easy to follow. And only have to watch once. Thank You.
Is there a size chart for these anywhere? The sizes seem to make no sense. I've seen "14mm"; "Size 20"; "T8" and two or three other systems. I have no idea how a "size" number related to a "T" number, or to mm or inches. Very confusing.
This is the best video on how to put these snaps on your masks. I saw a different video but she never explained that there was a male & a female and they went a certain way. I got a kit of these snaps and they looked the same (I picked up a few & they were all the same) and messed up a mask because of that. No biggy but this video rocks!
I want to thank you for this. I bought mine last December, and was scared i=I'd mess it up..Tried after watching this, and am now snap crazy on everything! My latest is in the seat belt pads, instead of Velcro....Thanks!
Have you had any not working?? I damaged a tons of them because the male never went into the female...I had to remove the green rubber when installing the male to make it works..have this happened to you?
Thanks for this tutorial. I bought a kit to do some really nice (I hope) embroidered glasses cases for gifts and it has been years since I used a kit so I couldn’t remember how to use them!
I have this exact button snap presser ..thing and I am having A LOT of trouble with it. When I press down to snap them on, what starts out as the point gets pressed down crooked or sideways. Am I doing something wrong or is it possible that my presser is defective?
Hi Ashley, I've watched a few videos on snaps and yours seems to be the most quick, easy and efficient. Do you mind sharing tips on where I might find these snaps for purchase?
You can get special snaps with longer prongs for thicker fabric. Felt fabric might be a problem because it stretches and loosens under repeated pressure as you open and close the snaps over time.
It's not hard to squeeze but u need to give it some good force, I will push it into the table to help give me more leverage as my grip isnt strong enough to do it with one hand
JoJoZep ofthejungle I thought the other parts were for a different sized button. You unscrew it and put the bigger one in but please google or RUclips it. I'm not positive
Hey gf, is it possible that I'm mashing mine too hard? Lol I got the whole male female end thing, they go on no problem, but then they don't snap for beans. I even used the pliers in a frustrated moment to snap them. Uh that didn't help either... Imagine that. I'm using a fairly thin T shirt material, that I design interchangeable items that can be snapped on to it. So I'm placing all the female end where I want them and then snapping on the male end to them. But a lot of them don't snap together. Okay I've tried lessening my smash and I'm still having trouble getting them to snap. got any ideas? I got these snaps on Amazon I think straight from retailer is it possible that some of the snaps or faulty or I'm the faulty? Any thoughts would be appreciated. Thanks, Ginger
I'm having the same trouble Ms. Ginger is. I saw your reply that she needs longer snap posts. Where can i get them and how do I know they're the right ones. Fishing through the Dritz.com site was very confusing. Thanks! Pat
If the parts fit on the fabric, but then the snaps don't snap together, you need shorter stems. You could try trimming a tiny bit off the stem with nail cutters to adapt them, or you can buy shorter stem snaps from Kam (Google for your country's own supplier). The reason they aren't joining, is because the stem smooshed part in the receiving part is making a big lump that stops the other half from joining enough to click.
Thank you my pliers came with all the snaps in various colours but it misses out on very important information? So thank you for your very informative video. Subscribes and Liked
It would have been nice if you would have shown what the "replacement parts" were for and how to install them and do they come with parts already on the tool? I am getting the tool tomorrow and no idea how to use. Thanks for showing HOW but would have liked to know how to change parts or does the tool already come with the part on it. Thanks!
Hope you got it sorted. Have you tried pushing harder to make the little nub inside flatter? Or you could try snipping a teeny bit of the stem beforehand.
I greatly appreciate the pace and clarity of the video. Best I have seen on the subject. It was easy to see what was going in. And it was paced in such a way, that it was easy to follow. And only have to watch once.
Thank You.
Great demo! Thank you so much - I'm following along to use mine for the first time. Very clear and easy to follow!
Thank you for e planning to which snap goes on top and which goes on bottom.
Thanks so much for this tutorial. I just got mine over the weekend & was confused on how to use it.
The poker is called awl lol
Well...she knows how the female and male snaps snap together!🤣
Is there a size chart for these anywhere?
The sizes seem to make no sense. I've seen "14mm"; "Size 20"; "T8" and two or three other systems. I have no idea how a "size" number related to a "T" number, or to mm or inches. Very confusing.
T5 is size 20, the most common size.(It's 12.4mm.)
T3 is size 16 (10.7mm).
T8 is size 22/24 (14.1/14.7mm).
Can a Dritz brand plier be used for other brands of snaps? Anyone know?
Following
This is the best step by step video I found it was very helpful..you shown the pieces up close and explained it well...thank you
А про насадки?
I'd like to know when you use the other black stamps and the other press that come with these pliers.
This is the best video on how to put these snaps on your masks. I saw a different video but she never explained that there was a male & a female and they went a certain way. I got a kit of these snaps and they looked the same (I picked up a few & they were all the same) and messed up a mask because of that. No biggy but this video rocks!
I want to thank you for this. I bought mine last December, and was scared i=I'd mess it up..Tried after watching this, and am now snap crazy on everything! My latest is in the seat belt pads, instead of Velcro....Thanks!
I have two diffrent set,and still learning how,i see this too,seems much easier.
Have you had any not working?? I damaged a tons of them because the male never went into the female...I had to remove the green rubber when installing the male to make it works..have this happened to you?
What if the inner pressed part is uneven? I’m having issues with that :(
Are these the same as “Kam” snaps or an off brand?
Want to buy this button & machine also....Ple tell how it ll be possible ....
Hi how do you know the difference between the Male and the female pieces please. My instructions on backing. Ridiculous instructions thank you
Thanks. I received my kit today.
Thanks for this tutorial. I bought a kit to do some really nice (I hope) embroidered glasses cases for gifts and it has been years since I used a kit so I couldn’t remember how to use them!
Love the way you explained so really easy thank you
Thank you so much....I brought one about a month ago, now I know how to use it properly.....thanks again!
These are great to fix up a hanging tea towel on your stove. Look it up on RUclips.
This was such a great tutorial thank you!!!
I have problem squeeze because of my carpal tunel. Is there a another way to squeeze like using a hammer to push down inside the middle snap?
I hold it closed and then push against a table and my body to squeeze harder. I also have carpal tunnel issues
Nicely explained. Thanks so much.
Can you use these on sweater material ?
I have this exact button snap presser ..thing and I am having A LOT of trouble with it. When I press down to snap them on, what starts out as the point gets pressed down crooked or sideways. Am I doing something wrong or is it possible that my presser is defective?
You could try cutting a teeny bit off the stem before squeezing with the tool. Maybe your fabric is a bit thin?
Thank you! Exactly what I needed to know!
Hi Ashley, I've watched a few videos on snaps and yours seems to be the most quick, easy and efficient. Do you mind sharing tips on where I might find these snaps for purchase?
I got my snaps off Ebay and my snap setter from walmart, hobby lobby or joanna but if not u can get snap setter on Ebay too
ebay sell a kit with everything in it
There’s a tool called the Internet with a search engine called google. Try it and you’ll probably find out where you can buy this!
I can’t seem to make the white one work
Hmmm. I always heard the white ones work, but most of the coloreds don’t. Strange.
Hi. Will this work on 2mm thick felt fabric??
You can get special snaps with longer prongs for thicker fabric. Felt fabric might be a problem because it stretches and loosens under repeated pressure as you open and close the snaps over time.
Is the tool hard to squeeze? Asking because I have gripping issues. Thanks!
It's not hard to squeeze but u need to give it some good force, I will push it into the table to help give me more leverage as my grip isnt strong enough to do it with one hand
Thank you for your tutorial mine were driving me crazy but now it's all ok... stay safe x
Thankyou very much. Explained very well and now I know how to use this x
Gee all those tools but incredibly easy but what is the screwdriver for?
It came with replacement parts for where the snaps set so it's to replace those little things.
JoJoZep ofthejungle I thought the other parts were for a different sized button. You unscrew it and put the bigger one in but please google or RUclips it. I'm not positive
Oh and I love Jo Jo Zep
Thank you for the video. It’s really useful and easy to follow
Hey gf, is it possible that I'm mashing mine too hard? Lol I got the whole male female end thing, they go on no problem, but then they don't snap for beans. I even used the pliers in a frustrated moment to snap them. Uh that didn't help either... Imagine that. I'm using a fairly thin T shirt material, that I design interchangeable items that can be snapped on to it. So I'm placing all the female end where I want them and then snapping on the male end to them. But a lot of them don't snap together. Okay I've tried lessening my smash and I'm still having trouble getting them to snap. got any ideas? I got these snaps on Amazon I think straight from retailer is it possible that some of the snaps or faulty or I'm the faulty? Any thoughts would be appreciated. Thanks, Ginger
Ms. Ginger you need longer snap posts.
I'm having the same trouble Ms. Ginger is. I saw your reply that
she needs longer snap posts. Where can i get them and how do
I know they're the right ones. Fishing through the Dritz.com site
was very confusing. Thanks! Pat
If the parts fit on the fabric, but then the snaps don't snap together, you need shorter stems. You could try trimming a tiny bit off the stem with nail cutters to adapt them, or you can buy shorter stem snaps from Kam (Google for your country's own supplier).
The reason they aren't joining, is because the stem smooshed part in the receiving part is making a big lump that stops the other half from joining enough to click.
How do get them off.
i take needle nose pliers and pinch off the flattened piece, its not easy but its relly the only way.
Thank you so much. You were a big help. I will be following you.
Glad I could help!
Thank you very much for the tutorial,, it looks so easy,, i'll try my best to do it by my self.
Best explanation!! Thank YOU!!
Thank you my pliers came with all the snaps in various colours but it misses out on very important information? So thank you for your very informative video. Subscribes and Liked
Great video I was lost in how to use the tool
Thank you so much. You explained it so well 😊👍
Great video 👌 !!! So well explained !! Thank you !!!
It would have been nice if you would have shown what the "replacement parts" were for and how to install them and do they come with parts already on the tool? I am getting the tool tomorrow and no idea how to use. Thanks for showing HOW but would have liked to know how to change parts or does the tool already come with the part on it. Thanks!
the tool will come assembled. ive never had to replace anything on it but have the parts if needed
Happy snapping!!
where do I buy one in India
Got mine from Amazon after trying local shops, no one had except Amazon
What if you fabric is to thick?
I would probably go with a sew in snap
Can’t because it’s vinyl and I don’t like the way sew in snaps look. I’ve read about these snaps with a longer prong. I’ll have to look for those!
@@BeatlesFanSonia did you manage to find ones with longer prongs?
Gary Wilson yes. Ordered them directly from the company.
@@BeatlesFanSonia have you got a link please? Thanks in advance.
Súper y se puede hacer infinidad de manualidades........
You explained it well thank you 🤗
Thank you!! Your video was a big help!!
Mine work but dont snap. 😭 driving me crazy.
Hope you got it sorted. Have you tried pushing harder to make the little nub inside flatter?
Or you could try snipping a teeny bit of the stem beforehand.
Thanks for the explanations!
Thanks very much for this video. Perfect! Very well explained I'm totally clear on what to do with my new popper set now. Cheers 🙋♀️
Thanks!
Thank you💖
Thank You Ashley!!!
Thank you
best video thank you so much
Thank you, I’d been struggling till I came across your video where you explained it perfectly. I wasn’t squeezing it hard enough. Xx
thank you so much
very good video.... thank you
nice
Thanks i try but crafts need to be idiot proof!!! Lol
Thank you