Hyundai Elantra Sport - How to replace clutch Assembly on FWD
HTML-код
- Опубликовано: 8 сен 2024
- Hey guys this video is gonna be a long one. In this video im showing on how to replace a clutch assembly on elantra or any hyundai vehicle with front wheel drive. This vehicle has a complain about gear not engaging properly and the clutch pedal when press it has a pulsation. I hope you will enjoy the video and thank you for stopping by to this channel.
This youtube channel is intended for informational purposes only. The jobs that you see on these videos are based on my knowledge and experience as a technician. Information provided through this youtube channel is not intended to serve as a substitute for your professional technician/manufacturer.
Camera: DJI Osmo Action
Editing software: LumaFusion
Intro music: Animotica
Outro music: bensound.com
Thumbnail and Outro template: canva.com Авто/Мото
Clear and nicely detailed step-by-step. Thank-you.
good vid!!
Is there no springs to absorb shock in the clutch plate? I have a 2018 Elantra SE with a 2.0L and 6-speed manual trans. I am starting to hear a slight "tinney" rattle noise when accelerating moderately or coasting that will stop immediately if I depress the clutch petal. No performance issues at all, everything works just fine, but I want to try and figure out what it is before something bad happens! Thanks for this video!
That could be the release bearing or the the springs in the clutch plate.
I got excited when I saw this. Unfortunately I have the DCT. Miles are starting to rack up, and I'm starting to notice a little more slippage.
Yeah, could be the clutches.
Excellent video.
Thank you for this video.
What are the part numbers for this whole clutch kit?
I have 2017 Elantra Sport and clutch is loosing pressure when pressed to change gears. Its intermittent and random when it happens.
Unfortunately if you buy this parts its gonna be individual from the dealer, 41421-32AA1, 41300-32130, 41100-32130. Hope that helps
Hi, could a clutch for kia rio be placed in hyundai avante 1.6 l 2008?
The best you can do use what the brand uses, in your case get something from kia rio to prevent complications.
@@hyundaitech that is what available .. even the Kia rio also has 1.6 l engine .. so i think it maybe suites.
@@LawatheMEid you can try, when you remove it and its physcally the same and then yeah you can try
Hi it says you are a Hyundai technician I hope you can answer my question ,, I have 2018 Tucson it won’t crank when I press the start button but I can get it to start by jumping the starter relay in the fuse box under the hood ,, I took it in to get checked out at the Hyundai dealer the technician said it was the smart key module that’s bad they asked for 550 bucks to replace ,, part alone 446 bucks .
I found a used one for 40 bucks which I can install my self but my question is this ,,,,, if I install it do I need to get it programmed by the dealer or there is no need to program it ?
Yes you need to program the new module, like your new key. If you jump it maybe theres a circuit issue on the junction box? I have some cases that theres some chewed wires under the fusebox and for some reason i always find it on the tucsons.
I have a manual transmission 2013 Elantra coup. I’m so the procedure the same between the two vehicles?
Yes almost the same except the turbo side of the vehicle.
Sir how can you adjust clutch? The biting point is too high, replaced the clutch recently.
Im not too sure if theres adjustment on a manual transmission, what you can do is try to bleed the slave cylinder make sure theres no air in the system.
Why removing the subframe? It can pass without doing that
Yes its doable, but i always does that easy for my body.b
Why you watching a how to video if you know how it's done?
Sometime you learn new trick by watching someone doing it just because you know how to do it doesn’t mean you can’t learn something new by watching someone else doing it
I got a 2019 elantra my slave cylinder has the bleed nipple but doesnt have a way to loosen it its plastic how do i bleed it
You just have to hold where bleeder screw is mounted. I know its plastic just be carefult.
Is this repair being part of P0731 code issue?
P0731 is a automatic transmission code, im guessing that you have a cvt transmission and most likely you need new transmission.
Not replacing the flywheel? Does it not need to be replaced?
Depends, if flywheel still okay visually i dont replace it, unless theres a obvious signs of cracking or damage on it
Is this the same for the n?
For the N im not too sure, but should be almost the same, maybe the difference is the elsd part of the transmission.
So the clutch in these is side ways of the driveshaft?.... odd
Yup ,
Recently changed mine on a 2017 elantra sport and now it doesnt hold a consistent idle bouncing between 630-650. Sounds like it has a lumpy cam lol
You found the problem?
How much is this whole process ?
Labor 6-7 hours.
How are things?,super -do you want more followers?-goodbye!.