Building a WS6 in 13 minutes

Поделиться
HTML-код
  • Опубликовано: 4 окт 2024
  • Join me on my building assembly of my Thompson Motorsports engine and install into my 2000 Pontiac Trans Am WS6. Not everyone has a garage or a shop with a lift. I was able to do this assembling my engine in my living room, wife permitting, and installed the engine in a parking lot outside of my apartment complex.
    Thompson Motorsports iron 370ci 6.1l
    Approx. 11.1:1 compression
    Trick flow as-cast 220 cylinder heads, milled .015"
    Yella Terra 1.7 rockers
    LS7 lifters
    Holly sniper EFI sheet metal high-rise intake manifold 102mm
    Nick Williams 102 mm throttle body
    Chris 1313 pro stock intake
    Patrick G custom grind cam. 242/250 .629”/.615” 111 LSA +2
    Hooker supercomp long tube headers
    Custom y pipe with 4-in electric cutout to stock slp Cat-Back
    McLeod rxt clutch
    McLeod billet steel flywheel
    MGW short throw shifter
    513rwhp/438rwtq on 91 octane
    Instagram: Devouru_ws6

Комментарии • 34

  • @Solitary_lifestyle
    @Solitary_lifestyle Год назад +4

    Sir you are the man.. you hear me? I have never seen anyone build a engine in the apartment. You have just inspired me and gained a new subscriber #ws6goat 💯

  • @UltimateWarrior84
    @UltimateWarrior84 Год назад +2

    Wow, built this sweet engine in a hallway. Crazy cool!

  • @sanchezjames82
    @sanchezjames82 2 года назад +5

    Nice job dude you have inspired me to start my own WS6 build I don't know what I'm doing but I'll will learn.

  • @SecretBachelor
    @SecretBachelor 2 года назад +3

    I have a Supercharge 2000 silver WS6 with a manual transmission sitting in my garage. It has 21,102 miles and I’m ready to get it back on the streets after seeing your video . 👍

    • @ErinMercurial
      @ErinMercurial 5 месяцев назад

      How can you have a WS6 with a super charger and you dont even drive it? ughhh jealous! lol

    • @SecretBachelor
      @SecretBachelor 5 месяцев назад +2

      @@ErinMercurialI try to drive it once every two weeks but will make an effort to take it out more frequently 🍺😎

  • @richardkamowski4656
    @richardkamowski4656 3 года назад +5

    I have the trickflow 220s on my 383 in my pewter trans am , good heads for the money

  • @bnrz28
    @bnrz28 3 года назад +3

    Great vid man

  • @stephenestrella2252
    @stephenestrella2252 3 года назад +1

    You out my trap door puts mine to shame hahaha. Sounds damn good on the rollers too

  • @clementcroitor
    @clementcroitor 3 года назад +2

    What type of coffee you drinking my guy? You were gigging!!!

  • @lazylion420
    @lazylion420 11 месяцев назад

    cars too nice to be sitting in an apartment lot. hope you got yourself a house and garage ASAP.

  • @ErinMercurial
    @ErinMercurial 5 месяцев назад

    You made it look so easy! Can you do this for my Firebird? lol Those dynos always make me squirm! I dont see how you handle it. ughhhh

    • @jrandsr5158
      @jrandsr5158  5 месяцев назад +1

      Yeah it can be a little nerve-racking. It definitely will find the weak points if there are any.

  • @emmanuelcastaneda7667
    @emmanuelcastaneda7667 2 года назад +1

    Did the high rise not has any cowl issues with clearance?

    • @jrandsr5158
      @jrandsr5158  2 года назад +1

      No. It actually clears by maybe a quarter inch. I use a jack to get an extra quarter inch though

  • @conservativetexan2289
    @conservativetexan2289 Год назад

    Won’t be able to drive this much longer in California

    • @jrandsr5158
      @jrandsr5158  Год назад

      Been driving it for 3 years on this build.

    • @conservativetexan2289
      @conservativetexan2289 Год назад

      @@jrandsr5158 I’m talking about all the regulations your state wants to put on gas cars

    • @jrandsr5158
      @jrandsr5158  Год назад +2

      @@conservativetexan2289 oh yeah. I love California.... I can't wait to get the hell out of this state 😂😂😂.

  • @catfissh
    @catfissh 2 года назад +1

    How did you like gowraps tune? I’m trynna choose my tuner for my H/C ls1 needs a retune bad lol

    • @jrandsr5158
      @jrandsr5158  2 года назад

      I had Jason @bayarearacing tune it. Pretty impressed with the results. I made pretty good power for just a forged internal truck engine.

    • @catfissh
      @catfissh 2 года назад

      @@jrandsr5158 It’s built by Thompson doe right? I thought I saw the stamp while assembling. Hows the driveability and everything? That’s what I’m more concerned of not so much peak power just want drivability and durability lol

    • @catfissh
      @catfissh 2 года назад

      @@jrandsr5158 thing came out bad ass doe! Even doe I’ve always been a camaro guy, I’ve always liked the ws6 look better but my ss ain’t bad haha. Also the trap door did you fabricate or buy it?

    • @jrandsr5158
      @jrandsr5158  2 года назад

      @@catfissh I think drivability is subjective. To me it drives fine but it bucks a lot under 1500 RPMs. Automatic probably wouldn't be a problem. It will be easier to drive if I have 4:10 gears.
      As for the trap door, I got that aluminum door from summit. Just had to use rivets and some silicone to seal it. I also put foam under the door because I didn't want any fumes or anything coming into the car.

    • @pabbqmgv
      @pabbqmgv 2 года назад

      You did an amazing job bro

  • @aaronthemartialmechanic893
    @aaronthemartialmechanic893 2 года назад +1

    What numbers did you make

  • @lazylion420
    @lazylion420 11 месяцев назад

    all that work for only 500 horses? I'd be mildly disappointed lol

    • @jrandsr5158
      @jrandsr5158  11 месяцев назад

      That's 500 at the wheels. Approximately 600 flywheel.

    • @DickVanNiggz
      @DickVanNiggz 9 месяцев назад +1

      That’s a solid number for a 35-3600 lb car lol I’m sure you drive something that blows it out of the water, don’t ya though buddy? 😂

    • @ErinMercurial
      @ErinMercurial 5 месяцев назад

      how can that be disappointing? thats over 40% more!