【加工動画22】旋盤ですり割り/ How to do screw slotting on a lathe
HTML-код
- Опубликовано: 27 май 2021
- 旋盤でハンマーナットと呼ばれる部品を作りました。材料はステンレス(SUS304)です。
すり割り加工で端面にマイナスドライバー用の溝を彫りました。
快段目盛15cmスケール(定規):amzn.to/3EoY8L0
チップソー: amzn.to/3csnzhC
スケール(定規):amzn.to/2Rq2X1d
手袋: amzn.to/3tDBYwV
使用した旋盤: ワシノ/Wasino LR-55A
※動画の一部、作業中(機械の電源offまたはニュートラル状態)に手袋をしていますが機械の駆動中は巻き込まれ防止の為に外していますのでご安心下さい。
正式な加工方法ではありませんが安全に考慮した上でアイデアの種にしていただけたら幸いです。
※動画のような自作アーバーでのチップソーによる加工は特に危険を伴います。
参考にされる場合は下調べを十分にして安全に配慮しながら自己責任でお願いします。
It is not a formal processing method, but I hope that you will be careful about safety and use it as a seed for your ideas.
I wear gloves in some scenes, but I remove them to prevent being caught while the machine is operating.
背景音楽/BGM: New Land - ALBIS Наука
角面取りが綺麗なのと、機械が綺麗に掃除されているのが好感度高いです。
Excellent work! Nice trick using the tap to locate the back of the hole for the countersink. I will remember this one.
Thank you for this tutorial. I always enjoy your video's. I learn skill's what i can use in future. Thank you. Regards from Germany.
小さい部品も綺麗に作りますね~!!
見てて凄く楽しいです
You are a professional. The detail you put in is amazing.
As always a great illustration, thank you
機械科生徒としてとても尊敬します!
I expected to watch a video with a big cup of tea, but I had to drink a small cup of coffee :) :)
Awesome work. True professional. Thanks for sharing this. Would like to see o ring grooves on odd shaped parts, like an oval part. Thanks
Professional works mate. Your channel Its the best meditation for me 😊
Great content again - thank you for sharing your time!
Well done, with your usual precision and excellent videography. The end result is commonly called a "dowel nut" in English, thanks for the demonstration.
Thank you for watching.
I didn't know how to call it in English. Thank you for teaching me.
@@SwaplampJapan You're welcome.
Less common English name; "barrel Nut". ☺
IKEA spare part? Great work as usual!
Really professional it so fine love to see more
I love your work !!
Again good work.
Great Work ❤️❤️❤️
Simplesmente fantástico 👏👏👏
Very nicely done skill wins again
This is Monozukuri! ものづくり!!!👍👍👍👍👍
Hello Master, great work!
The work is very good and neat ... 👍👍
Thanks for your jobs...👏👏👍
Lol, its perfection. But you can also buy them cheap.
Bizada tokarlar bunaqa ishlamaydi senga gap yòq. 👍
👍🏻Great work!
Good relax.
boa noite tudo bem parabéns Eu Antonio luiz Rio de janeiro !!
Anyone else hum this song when they are in the shop?
I've found it absolutely increases working efficiency on the lathe by at LEAST 17%.
Brilliant!👏👏👏
Good day sir!! Nice work. What kind of cutting oil are you using?
Thank you for watching. I use Castrol's Variocut C210.
Bravo 👏
Nice workmanship but I couldn't see what the significance of the slot is when it can't be rotated in that axis.
Thank you for watching.
This is a Dowel nut used for assembling wooden furniture.
Great
全ねじの中に全ねじが入っている、マトリョーシカネジの作成が見てみたいです。
The best 🛠🤪🤪
looks like someone lost the parts to his IKEA crib..
こんにちは、ワシノLPT-35C かLR 55みたいですね!私はLPT-35Cを使っています。愛知県のメーカーでしたが、今はアマダが取り扱っているみたいですね。まーそうそう壊れないですからね!流石、Mede in japan!!
ご視聴いただきありがとうございます。
その通りです。ワシノのLR-55Aになります。
現在は森精機の扱いになっているようです。
LPT-35Cは使ったことが無いのですが凝った構造のようでとても興味があります。
今ある設備で頭使えば色々出来るって事が分かりました。勉強になります٩(๑>∀
Отличная работа!
初めまして、よく使ってられる透明の切削油はどちらのメーカーの物ですか?
ご視聴いただきありがとうございます。
透明の切削油はカストロールのバリオカットC210という切削油です。
ありがとうございます。
👍good👍good
すみません、
2:14に出てくるジグを作製している動画がありましたよね?見つからない気がするのですが...気のせいですか?
ご視聴いただきありがとうございます。
こちらの動画で作製しています。
ruclips.net/video/RW-wME3dgEY/видео.html
@@SwaplampJapan 🤩
わざわざ有難うございました!
Next project a 1/2 inch breaker bar
Thank you for watching.
I would like to make any breaker bar.
But it may be half a year later.
Para que serve?
Obrigado por assistir.
É utilizado para a montagem de móveis de madeira.
2:59
このへんセミの鳴き声感ある
Долгожданно, но скромненько...
🎖🎖🎖
Приятная музыка для ваших Роликов !
Успокаивает и умиротворяет ! Приятный , неназойливый Просмотр .
Спасибо , ПОНРАВИЛОСЬ !!
КАРАМБА !!!
刃物台に取り付けているH型をしている部品はどのように加工したのか教えていただけるとうれしいです。もし、外注いているのなら、そのサイトも教えて欲しいです。
ご視聴いただきありがとうございます。
刃物台に取り付けているH型の部品はフライス盤で加工しました。
下記URLの動画がその加工動画になります。
ruclips.net/video/RW-wME3dgEY/видео.html
当方、フライス盤が無いのですが、製作してもらう事は可能ですか?当然、加工及び材料費用をお支払いします。
申し訳ありません。
概要欄にも記載しておりますが、加工の依頼はお受けいたしかねます。
返信、ありがとうございます。加工できる所を探します。