😂 I saw a nice little tool cabinet a while back. Like small, to hang a few wrenches (included), some doors. Simple. Sleek. So I look closer... Snap on. 2300 f'in dollars. You have to be f'in kidding me 😅
Nice review. Great timing as well, my small do it all Husky 3/8ths wrench/multi bit kit is on its last legs, and they (Home Despot) doesn’t carry that kit anymore. Great alternative, and better quality to boot!
I use mine as a mechanic every day. This bits are extremely hard and have never failed me. I recommend the 1/4 set and I need to get the 3/8 myself to complete my tool box. You will not be disappointed.
I have watched so many video reviews of this same tools but none of them put the damn thing to work. I can see all the pieces and stuff but I need to know how it works with real screws, tight corners, torque etc.
5 месяцев назад+1
I have worked with these tools, and they have proven to be very useful. In my job, I need to carry a small set of tools and an adjustable spanner across a large facility. These tools are always ready for use. Although they are relatively expensive, it’s important to use them for their intended purpose. Applying excessive torque, such as using a cheater bar, will cause them to break from the very first day, with real screws, if they are too rusted or seized, you may be able to use these tools on some occasions. However, if working with rusted equipment is part of your daily routine, these tools won’t last forever. In tight corners, they are not the best option, nor are they the worst. This set is an ‘all-rounder.
Sorry, the background music is just too loud. Might be good not to use any background music at all with this kind of video👍 I just stopped watching your vudeo half way coz its kinda irritating when I'm trying to listen to what you're saying.
Difficult to get out?? I’d worry about your workmanship if you can’t release a tool from a couple of bits of elastic without looking like a total incompetent. Stop playing to the crowd.
@@CreativeMechanic Had airside for Heathrow and Southampton, but still can’t see how you can’t remove a ratchet from 2 pieces of elasticated cloth. I have 3/8 set and agree it could be better but it’s hardly a pain. The Joker spanner’s are exactly the same system do you have issues with them too? Don’t blow a gasket mucker, it’s was a good honest review
I’m a bicycle mechanic and this is really a great tool for the job. Nice review ty
I used to repair wheelchairs and it’s the same there
I know it’s later on, but they must have heard you. Just got the 3/8 a few days ago and the 1/4 today. Both cases have Velcro on the back now!
Lol … I matter! Hahaha
Nice review, but I think you could cut the unnecessary annoying background music.
Agreed.... super annoying....
If snap on made that set it would be $2000 vs 120
😂
I saw a nice little tool cabinet a while back. Like small, to hang a few wrenches (included), some doors. Simple. Sleek. So I look closer... Snap on.
2300 f'in dollars. You have to be f'in kidding me 😅
Nice review. Great timing as well, my small do it all Husky 3/8ths wrench/multi bit kit is on its last legs, and they (Home Despot) doesn’t carry that kit anymore. Great alternative, and better quality to boot!
I’m in love with Wera and Knipex
I’ve been looking for a quality compartment cased set like this 😎🤙🏼
Great review reaaly good quality, just need to stop the annoying music your review skills are good enough. Cheers!.
How to price in tools with the inbox
The thumbnail was too good and I clicked on it
What I don't like are the big head and the right-left switch
Shoutout to my fellow A&Ps
i don't understand why they don't make the sae and metric in one set
How are these doing long term?
Is there a 1/2 size
yes
How many price of the inbox
How sturdy is it as a screwdriver on the 1/4” set?
I use mine as a mechanic every day. This bits are extremely hard and have never failed me. I recommend the 1/4 set and I need to get the 3/8 myself to complete my tool box. You will not be disappointed.
If you could get just one, for general use, which one would you get?
3/8 in metric
I have watched so many video reviews of this same tools but none of them put the damn thing to work. I can see all the pieces and stuff but I need to know how it works with real screws, tight corners, torque etc.
I have worked with these tools, and they have proven to be very useful. In my job, I need to carry a small set of tools and an adjustable spanner across a large facility. These tools are always ready for use. Although they are relatively expensive, it’s important to use them for their intended purpose. Applying excessive torque, such as using a cheater bar, will cause them to break from the very first day, with real screws, if they are too rusted or seized, you may be able to use these tools on some occasions. However, if working with rusted equipment is part of your daily routine, these tools won’t last forever. In tight corners, they are not the best option, nor are they the worst. This set is an ‘all-rounder.
Is there a store where I can buy an empty textile 1/4 box?
KC Tools has them
What’s better the 3/8” or 1/4”?
3/8 feels better to me
Are they impact rated?
Negative
Anybody know of a generic version of this on Amazon?
Yeah Wera lol
great review
They're called elastic straps
Me not know many word
@@CreativeMechanic 🤣 I feel the struggle too
how does it RACHET ... or does it?
👍
I made it 90 seconds till the background noise drove me up the wall
😂
Sorry, the background music is just too loud. Might be good not to use any background music at all with this kind of video👍
I just stopped watching your vudeo half way coz its kinda irritating when I'm trying to listen to what you're saying.
Nice pics dear good night
If only they made a 12pt.
If you're stumbling over an elastic band, maybe tools isn't your best game.
Sick burn?
As my wife says, it's all about your package
Anyone else find the background music extremely obnoxious
That is NOT a complete set deepwel sae & metric pliers wrenches
Yeah…. Take my money.
Difficult to get out?? I’d worry about your workmanship if you can’t release a tool from a couple of bits of elastic without looking like a total incompetent. Stop playing to the crowd.
You’ve clearly never worked in a FOD critical environment
@@CreativeMechanic Had airside for Heathrow and Southampton, but still can’t see how you can’t remove a ratchet from 2 pieces of elasticated cloth. I have 3/8 set and agree it could be better but it’s hardly a pain. The Joker spanner’s are exactly the same system do you have issues with them too? Don’t blow a gasket mucker, it’s was a good honest review
Hard to open when I’m holding the a camera in the other hand
.
couldn't watch to the end because of the music. Just lose it completely.
very annoying music in the background. I stopped the video
Good. Stay away
Cheap gimmicky crap!
No
.