Astra H Z16XEP Manifold absolute pressure (MAP) sensor, Test2

Поделиться
HTML-код

Комментарии • 12

  • @goranmilic2449
    @goranmilic2449 4 года назад

    I have a problem with the Astra h 1.6 105hp twinport when the cold engine drops the pedal test 111306 and then drops the Misfire for some or all cylinders! The bomb and spark plug replaced but the problem is still there! Do you know what the problem is, though I doubt it ECU! Thanks

  • @bashz.k222
    @bashz.k222 Год назад +1

    Thank you very much
    Where is the MAP sensor located in opel astra gtc 2005 , I tried hard to find it ?
    Regards

    • @agentarz
      @agentarz  Год назад +1

      If it is with a z16xep engine it is located under the ECU. For other engines, ask Google.

    • @bashz.k222
      @bashz.k222 Год назад

      @@agentarz thanks 👍🏼

  • @mornoth
    @mornoth 4 года назад

    hi. could you please explain what does it mean when you see 99 kpa value for mafifold absolute pressure section on your device screen

    • @agentarz
      @agentarz  4 года назад +1

      This is normal absolute atmospheric pressure. Atmospheric pressure at sea level on a standard day is approximately 14.7 pounds per square inch (psi), or 29.9 inches of mercury (HG), or 101 kilopascals (kPa), or 1 Bar.

    • @mornoth
      @mornoth 4 года назад

      @@agentarz Thank you very much for your information. i would like to ask one more thing. before starting my car it shows 99 kpa. when i start the engine it stays still 99 kpa. if i throttle a bit to move it shows around 100-105 kpa. if i make nearly full throttle the value becomes 115- to 130 kpa. but i learned from web that 99 kpa is before starting engine and after starting it becomes lower than 99 kpa. but mine is raising. never drops under 99 kpa. does it mean my map sensor is broken?

    • @agentarz
      @agentarz  4 года назад +1

      @@mornoth Before starting the car it is normal to be around 95-99kpa. After starting, at idle rpm it is normal to be around 30-35kpa.
      And yes, your sensor is probably broken.

    • @mornoth
      @mornoth 4 года назад

      @@agentarz thank you very much for information, it helped a lot.

    • @mornoth
      @mornoth 4 года назад

      Svetoslav Atanasov hi Svetoslav. İ changed map sensor with new one. But after starting the car at idle, value shows 99 kpa the same as when the car not started. When i throttle to move the car, value increases 110-120-130 kpa like that depending on the force of throttle i applied. Do you have any idea why my values like that. İ could not find a solution for this problem.