Hill Country Customs is a really good company. I ran some of thier bars prewired on the old RK I had. I was very pleased with the bars and the service they provided.
Love these clamps. Use them on my 95 Fatboy. They work good on the front left frame down tube to replace the factory clutch cable clamp. And I use the double clamp for the throttle and idle. Your bars look awesome.
I ordered something and got those in stead of what I ordered. Now I know what I can use them for but I'm not changing bars so probably will sell them. Thanks for this video! Don't let the jealousy bother you. Yes we all would like to get stuff from companies but reality says it's not going to happen so enjoy and don't let tge bitching get to you!
Crazy how fast you knew 1 1/2". hahaha.... Hill Country Cycles is legit. Nice addition. Do a tuner with Blockhead. That would be a fun collaboration video. Cheers
hey, im new to your channel and new to riding, just got my provisional licence here in the uk. you inspired me to start my biking journey and i will forever be grateful. Thank you
Sorry I missed you & the Mrs in Daytona last month - hopefully BW & I will see ya in Leesburg later this month? I got the same KST 18" bars for my 15 RK (BLK Spearheads) - Best "visible" UPGRADE thus far! Thx for the advice on the HCC Cable Line Clamp - will look to use on the FLHTK. Keep on Keeping on - See ya soon... 🤔
Welcome back to the land of the big BX, GI. And you hit the ground running with a video about something we can all use. Good job, even if you are so jet lagged you won't remember doing this video. Hope to see you two do a live soon, hopefully while I can catch it and not while I'm driving back from Daytona. It's lonely round here with just cows at Cackleberry for company.
Welcome back Brother! Hope you rebound quickly from jet-lag. Nice, functional & inexpensive cable clamps for managing cable alignment, sway, etc. with tall bars & longer cables. Looking forward to the Radioactive Green build...looks freaking awesome. Also, looking forward to your Tuning Videos (Dynojet Power Vision PV3b, '21 and newer HD). I ran same tuner (base map from fuel moto) on my '21 RGS 114 Stage-2 (S&S 465 cam, S&S 2-1 Sidewinder, FM/K&N 3956 air cleaner) w/stock OE narrowband O2 sensors and it worked really well. For my '23 RG-ST (Stage-1 right now...S&S 2-1 Sidewinder and HD-SE Extreme Ventilator air cleaner, I plan to run same Tuner (PV3b) but also run Dynojet TT-8 18mm wideband O2 sensors. Again, welcome back!
I really like the green paint. I can not say how autotune compares to a tuner. I had my power commander go bad. It was replaced and the bike was tuned. The a little over a year later I had the bike dyno tuned again. I was trying to get more MPG out of it. The bike was running at a 12 to 1 air fuel ratio. They leaned it out to 13 to 1 air fuel ratio at full throttle. I gained 7hp and 8lbft of torque. Unfortunately I only gained about 1MPG on average. The tune cost me $360. The biggest surprise to me is the only place I found near me to get my bike dynotuned was the Harley Davidson dealer. Why I was shocked is because it is a Honda VTX1800R. With all the talk of Harley dealers not working on older Harleys. This one worked on a Honda.
I was thinking you got the Tornado Beer Dispenser, Oh if place Items you Don't Need or Use with Price tags on them on wall, some of us would buy your cast offs, that or maybe on a weekend do a Monkey Garage Sale
I have zero computer-controlled motorcycles nor do I want one besides maybe an Indian Challenger videos are still extremely entertaining and insightful
What about taking it Blockhead’s in Orlando? Chris is a wizard on their Dyno, and they have some really good experiments they’ve run on the M8 platform! 🙂
G'day Mr & Mrs monkey.... WARNING ❗❗ From personal experience & I still using these exact product from Drag Specialist, now little TIP.... My clutch cable out side of cable was wearing, so unclasped & put some electrical tape on the clutch cable to provent damage... Also your brake cable being loose & siding inside the bracket WILL EVENTUALLY RUB & DAMAGE ❗ So I put a little electrical tape again on the brake cable & everything is perfect. ALSO I put a little electrical tape on the inside of the bracket on the bar side, to prevent damage to the bars .... As WILL scratch in the long run❗ Do whatever you like but this was my experience & what I've done to make them work properly & without issues in the long run..... Living The F🤪KING Dream ❗ Safe travels 🙏♥️🐾🐾🇦🇺
@@ProfessionalMonkey That was a good one. It had an impact on my way of thinking. I had always wanted to RG swap my bat-wing EVO, for 25 years. But after watching your vid, I changed my little mind.
@@carltonbirds no idea what that means. What I’m saying I’m me, I’m not changing, if you do t like it, find another channel. I don’t change for anyone, normally that’s why people like my channel. Because I’m genuine.
Hill Country Customs is a really good company. I ran some of thier bars prewired on the old RK I had. I was very pleased with the bars and the service they provided.
Love these clamps. Use them on my 95 Fatboy. They work good on the front left frame down tube to replace the factory clutch cable clamp. And I use the double clamp for the throttle and idle. Your bars look awesome.
I ordered something and got those in stead of what I ordered. Now I know what I can use them for but I'm not changing bars so probably will sell them. Thanks for this video!
Don't let the jealousy bother you. Yes we all would like to get stuff from companies but reality says it's not going to happen so enjoy and don't let tge bitching get to you!
Yep. I got those when I put bigger bars on my 98 RK. It looks cleaner and holds the cables in place. I got a set of 3 for $30-40
I've gotten those clamps in different sizes for a variety of applications from V Twin manufacturing going back a least 15 years.
Welcome back. Glad you made it home safely. We were starting to get a little bit worried with the lack of content. Thank you for the update.
the new parts look cool. i missed you 2 not being on the live streams and all. 😞. lol its fine, glad you back. good vid
Thanks 👍
Crazy how fast you knew 1 1/2". hahaha.... Hill Country Cycles is legit. Nice addition. Do a tuner with Blockhead. That would be a fun collaboration video. Cheers
A masterclass in making a 2 minute video stretch to 10 minutes. 😂
Shadetree Surgeon is the master of talking about nothing and making content out of anything.
It’s a talent…
More than fine with me, i repeat listen to all of the video’s because his voice sounds like friggin angels.
@@kawicrazed400 I’m just bustin balls a bit. His voice does sound like angels in the early AM after a bender.
Usually I hate it too but with monkey I like it. It makes it like having a chat in the garage with a buddy.
hey, im new to your channel and new to riding, just got my provisional licence here in the uk. you inspired me to start my biking journey and i will forever be grateful. Thank you
Sorry I missed you & the Mrs in Daytona last month - hopefully BW & I will see ya in Leesburg later this month?
I got the same KST 18" bars for my 15 RK (BLK Spearheads) - Best "visible" UPGRADE thus far!
Thx for the advice on the HCC Cable Line Clamp - will look to use on the FLHTK.
Keep on Keeping on - See ya soon... 🤔
Welcome home. Missed you your videos!
Welcome back to the land of the big BX, GI. And you hit the ground running with a video about something we can all use. Good job, even if you are so jet lagged you won't remember doing this video.
Hope to see you two do a live soon, hopefully while I can catch it and not while I'm driving back from Daytona. It's lonely round here with just cows at Cackleberry for company.
Welcome back Brother! Hope you rebound quickly from jet-lag. Nice, functional & inexpensive cable clamps for managing cable alignment, sway, etc. with tall bars & longer cables. Looking forward to the Radioactive Green build...looks freaking awesome.
Also, looking forward to your Tuning Videos (Dynojet Power Vision PV3b, '21 and newer HD). I ran same tuner (base map from fuel moto) on my '21 RGS 114 Stage-2 (S&S 465 cam, S&S 2-1 Sidewinder, FM/K&N 3956 air cleaner) w/stock OE narrowband O2 sensors and it worked really well. For my '23 RG-ST (Stage-1 right now...S&S 2-1 Sidewinder and HD-SE Extreme Ventilator air cleaner, I plan to run same Tuner (PV3b) but also run Dynojet TT-8 18mm wideband O2 sensors. Again, welcome back!
Those clamps have been around forever. I have them on my 2001 Deuce
Dude those bars look wiked I bet they r comfortable as well !!
Hill Country Customs is in my home town. Bought my full bars setup from them a few years ago. Good company.
Right on
Make seal driver out of PVC, cheaper and works good. Done a lot of forks with them.
I've had all these on my bike since 07' great products and great way to clean up long cables!!
I like those a bunch. When I finally get around to new bars later this year, these are a must.
I really like the green paint. I can not say how autotune compares to a tuner. I had my power commander go bad. It was replaced and the bike was tuned. The a little over a year later I had the bike dyno tuned again. I was trying to get more MPG out of it. The bike was running at a 12 to 1 air fuel ratio. They leaned it out to 13 to 1 air fuel ratio at full throttle. I gained 7hp and 8lbft of torque. Unfortunately I only gained about 1MPG on average. The tune cost me $360. The biggest surprise to me is the only place I found near me to get my bike dynotuned was the Harley Davidson dealer. Why I was shocked is because it is a Honda VTX1800R. With all the talk of Harley dealers not working on older Harleys. This one worked on a Honda.
I put those on my RK, really adds that little extra to it.
Glad your back, to bad you could not make Spring Fling but I will have a shot for you!
You do that!!!
Totally agree! Put a set on my Street Glide and it really cleans up my 14" KST's
Glad ur home ! Jet lag is a bitch!! I was starting to have withdraws from not seeing your recent videos ..😂
I highly recommend All American cycles for the tuning.
I was thinking you got the Tornado Beer Dispenser, Oh if place Items you Don't Need or Use with Price tags on them on wall, some of us would buy your cast offs, that or maybe on a weekend do a Monkey Garage Sale
You could play a “that’s what she said” drinking game to all professional monkey videos 😂😂 fukn love it! Keep on keepin on🤘🏻
You could take a piece of rubber from an old inner tube, cut a small piece and rap it around before mounting to the bar
Hill country has some nice parts I like there handle bar clamp
I'll be looking for those clamps in Black! Pretty slick!
Love my clamps i made a video on rumble about them a few months back. Only thing i did was powdercoat mine.
I just ordered 4 of them, thanks for sharing the product 👍
Ive had this idea in my head for a few years. Glad someone makes it
Same here
I used the exact same Hill Country clamps and Motion Pro cable clamps when I put 18’s on my bike a couple of years ago. I used blue loctite, not red.
Good looking bracket. Welcome home.
Nice now let's get them green parts installed 😊
I have zero computer-controlled motorcycles nor do I want one besides maybe an Indian Challenger videos are still extremely entertaining and insightful
The cable wag drives me nuts I'll definitely be good to some of those for my chief
We make that cross bar at the riser for KST bars right here in Daytona. Jus Sayin 😉
“I bought ‘em. No one gave ‘em to me, so quit your bitchin’.”🤣🤣🤣
I'm definitely interested in those clamps
What about taking it Blockhead’s in Orlando? Chris is a wizard on their Dyno, and they have some really good experiments they’ve run on the M8 platform! 🙂
Take it to those dyno guys!
They ROCK!!!
That paint set reminds me of old school low rider stuff
Right!?
I’m sure Blockhead garage in Orlando could help with tuning if you wanted to go that route.
Thanks, he’s about 4 hours away and I don’t know him so I’ll just go to a shop that my friends have used.
So wish I had known about these sooner I just tied some Bandas around them for my 18” bars
I just picked some up myself with the same thinking as you.
G'day Mr & Mrs monkey....
WARNING ❗❗
From personal experience & I still using these exact product from Drag Specialist, now little TIP....
My clutch cable out side of cable was wearing, so unclasped & put some electrical tape on the clutch cable to provent damage...
Also your brake cable being loose & siding inside the bracket WILL EVENTUALLY RUB & DAMAGE ❗
So I put a little electrical tape again on the brake cable & everything is perfect.
ALSO I put a little electrical tape on the inside of the bracket on the bar side, to prevent damage to the bars .... As WILL scratch in the long run❗
Do whatever you like but this was my experience & what I've done to make them work properly & without issues in the long run.....
Living The F🤪KING Dream ❗
Safe travels 🙏♥️🐾🐾🇦🇺
Sometimes it's in the detail. Many of those things get overlooked.
I have 4 of them on my bike. I got mine at north country hall davidson in maine
Sorry I don’t know Florida’s layout but maybe head to blockheads garage and have sickwideglide tune your scooter for ya. Just a thought.
Nah, I’ll go to one of the performance shops I know down here. He’s about 4 hours away.
U can run the brake and clutch cables inside the bars, well I know u can with the Carlini
I don’t think that would work with a cable clutch.
Yea that’s true
Does the kitchen bars block the 2 gauges on either side of the stereo?
Nope
Trying to get hill country to help out is a nightmare ….
Those clamps are really nice
I think for your fans you should go all the way up to have it tuned at blockhead garage
Nah. I don’t know him and he doesn’t know me…
Chrome breaded wires would have looked good
That green is going to be awesome 😎
They make the same bar clamp that has the two holes for throttle cables
Can't wait to see the auto-tune vs. Dyno.
KST Meathooks. I have them and love them.
What kind of music do you like to come out of those speakers? Stevie Ray Vaughan would be a good choice.
14” bars on a RoadKing
👍 G2G
Let us know if they move/fall to the bottom of the bars after riding a bit
Was it YOU that the rainy day comparo with the RG vs the Bat wing?
I was one of them, yep.
@@ProfessionalMonkey That was a good one. It had an impact on my way of thinking. I had always wanted to RG swap my bat-wing EVO, for 25 years. But after watching your vid, I changed my little mind.
Nice product
Should take it to Blockheadmoto garage for tuning! He’s in your neck of the woods (ish)!!
He’s about 4 hours away. We dont know each other so I’ll just go to a shop my buddies have recommended.
Dynoed at block heads garage is the ticket 🎟️
Nah, I don’t know him and he doesn’t know me. I’ll go to one of the performance shops me or a friend has used
Fancy looking zip Ties
Nice Kawasaki green
Is your plate full yet
Just about.
@@ProfessionalMonkey keep up the good work
Lol, wtf is that poster on the wall about killing and murder 😂
Friday the 13th poster
Pro Monkey you need a bigger garage for your projects!😀
Everything past 12"s at least on bat wings.
The devil is in the details! Thanks!
Is everyone else's screen tiny. Never mind just my crappy phone
A schmuck?
Kst
i have 20 inch chubbys
on my 78 shovel flh
Hey dude, stick to the subject, don’t get sidetracked.
Or you could just watch someone else?
@@ProfessionalMonkey or even you.
@@carltonbirds no idea what that means. What I’m saying I’m me, I’m not changing, if you do t like it, find another channel. I don’t change for anyone, normally that’s why people like my channel. Because I’m genuine.
@@ProfessionalMonkey and that’s why I watch your videos.
Those bars are obnoxious. Can’t believe that would be comfortable.
I guess it’s good they’re not yours?
Was 16 inch apes. You need all new cables and wires and everything.