DIY Self Bleeding Cooling System For The Toyota MR2 SW20!

Поделиться
HTML-код
  • Опубликовано: 19 янв 2025

Комментарии • 5

  • @WiseGuyzGarage
    @WiseGuyzGarage  6 месяцев назад

    Silicone Tubing
    amzn.to/3WZGvdi
    1/8 NPT fittings (90 degree)
    amzn.to/3X5As7k
    Coolant Expansion Tank
    parts.lakelandtoyota.com/p/TOYOTA__RAV-4/Engine-Coolant-Reservoir-Right/3912422/164700V010.html?

  • @jerzymadycki3721
    @jerzymadycki3721 6 месяцев назад +1

    Correct me if I'm wrong, just thinking out loud here, but I am not sure if it's gonna work properly.
    Your donor car tank (rav4) holds less than half the amount of fluid in the cooling system, then MR2 does, therefore I believe the tank might be too small (or pressure too high once that much fluid expands).

    • @WiseGuyzGarage
      @WiseGuyzGarage  6 месяцев назад

      Thanks for the comment! The v6 rav4 from 2008 takes about 10 quarts when the mr2 takes about 14 quarts. So yeah it’s about 2/3 the size of the mr2 cooling system. I haven’t had an issue as of yet. But I will keep an eye out. I’ve been driving the car all over, haven’t had an issue. If I NEED to go bigger, thankfully Toyota made some bigger expansion tanks for other cars! Lol

  • @ramonmitra9548
    @ramonmitra9548 6 месяцев назад +1

    Can i use this resevoir the same set up of wilhelm?

    • @WiseGuyzGarage
      @WiseGuyzGarage  6 месяцев назад

      Yes, you can most definitely use this setup the exact same way as Wilhelm Raceworks does.