Congrats on that build! Best I have seen on RUclips. I am trying to rebuild it right know, but i am having trouble setting the angle between the front upper arms and the upper spring mount. They are leveled at your build. I wanted to ask what Kind of springs you are using? Or if you got any tips to set the angle? Keep up the good builds, realy impressive!
Shortening the shock shaft helpt! Thats a Lot for that tip 😊 The last thing I am struggleing right now is how to keep the upper front arms in a fix Connection. Do you just screw in the grub screw with good pressure? Or do you use glue/ locktide etc.? Mine Always loosens itself after a short while ... I even in drilled a hole in the screw it's connecting to for deeper penetration. It's reducing the stability thoug.
@@MiniBProduktions Sorry for the late reply. for the upper front arms I just tighten the grub screw with just the right amount of pressure. If you want to use glue, you can.
No worries cus of the late respond! Thanks that you responded anyway! :-) Yeah i just fixed the problem yesterday. The tap i put in the hole was just not good enough. I redid it and now i am able to screw in way further and it all works fine :) I also did another try with 2 more M1 screws from the back (so the 3 build a triangle and hold the inner screw tight) and that also works. So for anyone who also got problems with it. For now i just drilled a little hole in the inner screw as well so I will always tighten the arm at the same point. But just tighten with the right pressure like you said ist actualy enough and with a bit of locktide blue it shouldn't move at all.
@@kuyatangx6909 1. Yes, the screw size is 2mm, but the screw length depends on the size of the gearbox. 2. Yes, you also need to drill the upper arm holes in the gear.
A list of parts would be great for newbies looking to do this exact build. Great content love what u did
Thank you for your comment
pretty much the best mod i've ever seen and so beatiful, i will try it out sometime
Thanks you 🙏
excellent build!
Thank you 😊
Beautiful mod, thank you for sharing!!
May I ask if you have a link to purchase these white ball caps? Thank you!
Thank you. You can try searching for "TOOYFUL 10 Pieces Plastic M2 Link Rod End Ball Joint for RC Car and RC Boat Parts" in google.
@@bandit_did1977 thank you !!
Very nice, but where do we get all the parts from?
I bought all the parts from Lazada and Shopee.
Thank you
@@bandit_did1977can you share the link from lazada im from Philippines.thanks
Wow 🤩 you are a very talented rc builder 👍thank you for sharing. What a great use for those ill fitting aluminium parts 😎👌
thank you
Just what I was thinking with my little pile of useless alloy bits
can you share the link bin lazada and shopee all the parts and screws needed?
Ok
@@bandit_did1977 thank you
@@abetotero2695 th.shp.ee/CbapiU3
@@abetotero2695 th.shp.ee/KNJQMdT
@@abetotero2695 th.shp.ee/EZbpNkH
What are the black and white spacers from?
black is aluminum and white is nylon
Congrats on that build! Best I have seen on RUclips. I am trying to rebuild it right know, but i am having trouble setting the angle between the front upper arms and the upper spring mount. They are leveled at your build. I wanted to ask what Kind of springs you are using? Or if you got any tips to set the angle?
Keep up the good builds, realy impressive!
You need to cut off the shock shaft 2mm.
@@bandit_did1977 thanks for the quick response! Gonna try it out.
Shortening the shock shaft helpt! Thats a Lot for that tip 😊
The last thing I am struggleing right now is how to keep the upper front arms in a fix Connection. Do you just screw in the grub screw with good pressure? Or do you use glue/ locktide etc.?
Mine Always loosens itself after a short while ... I even in drilled a hole in the screw it's connecting to for deeper penetration. It's reducing the stability thoug.
@@MiniBProduktions Sorry for the late reply.
for the upper front arms I just tighten the grub screw with just the right amount of pressure. If you want to use glue, you can.
No worries cus of the late respond!
Thanks that you responded anyway! :-)
Yeah i just fixed the problem yesterday. The tap i put in the hole was just not good enough. I redid it and now i am able to screw in way further and it all works fine :)
I also did another try with 2 more M1 screws from the back (so the 3 build a triangle and hold the inner screw tight) and that also works. So for anyone who also got problems with it.
For now i just drilled a little hole in the inner screw as well so I will always tighten the arm at the same point.
But just tighten with the right pressure like you said ist actualy enough and with a bit of locktide blue it shouldn't move at all.
What's s MM of The screw that you used for the shock and upper arms?
2 mm
@@bandit_did1977 is it 40mm long m2 screw??..and you also drill the upper arm holes on the gearbox right?
@@kuyatangx6909 1. Yes, the screw size is 2mm, but the screw length depends on the size of the gearbox.
2. Yes, you also need to drill the upper arm holes in the gear.
What size tap? M2x0.4 or M25x0.45 ??
M2x0.4
@@bandit_did1977 Is spiral pattern better? Or straight groove?
@@BeatEh3 If the groove is straight, you need to find a way to lock it.
th.shp.ee/jauGZ4s