The only problem I have is you say you gotta use an xacto knife. No. To remove an O-ring, you use a pick. But, sure use the Xacto Knife with the razor blade. Use a tweezers or a Straight Pin. Keep the pin and dogbone end in a plastic bag.
i just did this tutorial and it worked well but no it spins out supoer easy. like cant turn without spinning out. i wonder if its because i have a larger battery than stock that might be pulling it or maybe i just suck at drviing 2wd. its very easy to spin and feels impossibld to drift. any ideas?
i did this to my rc car, it isnt the same as yours its cheap ash but i rwd converted it and it isnt getting enough power to the back wheels idk what to do, probably gonna replace the motor w sum bigger
I did this to my rc car but it would not work, the front 2 wheels do not spin at the same speed causing it to steer 1 way. How do I make it so they steer as one?
ruclips.net/video/XyABHOnC7xI/видео.html at around 6:43. It's best to poke a little hole, then screw the screw from the ball joint in. then cut the screw down a bit so that it won't be in the way of the pin that hold s the arm in place.
If you going to change it to rubber tires it wil be hard to drift it bcs it has to much grip and that's why the gave you hard plastic tires bcs they dont grip alot
And when you are done you realize there is not enough steering angle for RWD drifts. And then you'll find you need a gyro to handle hard acceleration and braking unless you like spinning out all the time. Don't do this, unless you just want to prove you can be an idiot.
Why don't you just take out the front wishbone end, if you ever plan to make is awd again, you can.... But no, you rather cut your center shaft, that's sad because now you cant go back to awd again
That "Dew it" made me subscribe. I'm new to 1/28 and this video taught me a lot.
So far this is the easiest rwd mod tutorial for k969 goodjob man
Thanks bro.
Facts
I agree.
Im really gratefull for finding this tutorial, Im from Spain and its hard to find a nice tutorial that I can understand
Man finally a helpfull Video I Love youre vids
I liked the video by the way perfect presentation and info
The only problem I have is you say you gotta use an xacto knife. No. To remove an O-ring, you use a pick. But, sure use the Xacto Knife with the razor blade. Use a tweezers or a Straight Pin. Keep the pin and dogbone end in a plastic bag.
i just did this tutorial and it worked well but no it spins out supoer easy. like cant turn without spinning out. i wonder if its because i have a larger battery than stock that might be pulling it or maybe i just suck at drviing 2wd. its very easy to spin and feels impossibld to drift. any ideas?
I did this with my car but it keeps spinning and I can't even make a curve in the drift
I know bro, sorry, new video coming out soon
@@a.s.a.p.5897 thanks broo
do a tutorial on how you do the mono shock thing
When converting to RWD Is it best to get different wheels for more grip or keep the original?
I still have the originals on, but I was thinking grippier wheels might help.
i did this to my rc car, it isnt the same as yours its cheap ash but i rwd converted it and it isnt getting enough power to the back wheels idk what to do, probably gonna replace the motor w sum bigger
I did this to my rc car but it would not work, the front 2 wheels do not spin at the same speed causing it to steer 1 way. How do I make it so they steer as one?
Don't tighten the nuts holding on the wheels all the way. Leave them a little loose so that the wheels can both move freely.
@@a.s.a.p.5897 I tried that but wheels wobble, I’ll try it again Peter tho
@@a.s.a.p.5897 later*
maybe u forget that every rwd rc drift need gyro
did you need to buy everything??
I bought the car, I already had all the tools.
When you take the wish bone out of the front part of the car do u have to do it on both sides idk anything about it I'm new to rc drifting
yeah, or else the other side will go flopping around too
I’d there a video of how you mounted the shocks?
ruclips.net/video/XyABHOnC7xI/видео.html at around 6:43. It's best to poke a little hole, then screw the screw from the ball joint in. then cut the screw down a bit so that it won't be in the way of the pin that hold s the arm in place.
Do you think if I did those mods Trimming the servo and the shock mod could I put the bug body on without having to cut the fenders and stuff?
And thanks so much for getting back to me I really appreciate it
@@jasonlemmond3012 The wheelbase was a little too small to fit on the kit I got, but I was going for that hot rod look so it didn't really matter.
@@jasonlemmond3012 ruclips.net/video/m621OI-kOVI/видео.html this guy did it without cutting
Cant find the video where you mono shock the rear end
ruclips.net/video/XyABHOnC7xI/видео.html
At 5:10
Are changing the plastic tires to actual rc drift tires worth it? Will it make a difference?
If you going to change it to rubber tires it wil be hard to drift it bcs it has to much grip and that's why the gave you hard plastic tires bcs they dont grip alot
i tried this but the car ended up spinning out every time I try to accelerate
yeah you need to buy a gyro, they're like twenty bucks on amazon
name for this metal knife? pls
Xacto knife
www.amazon.com/s?k=xacto+knives&adgrpid=115630923524&gclid=Cj0KCQiAxoiQBhCRARIsAPsvo-xT4gYZkvd7D4RKvyhgB3J22Yr_0y5XEEi5ayDtFIHZvSRTblk-4CgaAjFjEALw_wcB&hvadid=580835625815&hvdev=m&hvlocphy=9030127&hvnetw=g&hvqmt=e&hvrand=10598762380313617883&hvtargid=kwd-297132070976&hydadcr=27900_14518774&tag=hydsma-20&ref=pd_sl_5dqpiiuey0_e
Why haven’t you uploaded
Currently waiting for new video
Plz
@@daniel2sexcI've been busy, with a handsome man
And when you are done you realize there is not enough steering angle for RWD drifts. And then you'll find you need a gyro to handle hard acceleration and braking unless you like spinning out all the time. Don't do this, unless you just want to prove you can be an idiot.
Guess what I'm going to install next?
Thanks for the info
Why don't you just take out the front wishbone end, if you ever plan to make is awd again, you can.... But no, you rather cut your center shaft, that's sad because now you cant go back to awd again
Cause I wanted room upfront, it's sad that you didn't hear that in the video. Also you can buy replacements online.
where can i find a replacement driveshaft
Jamal. No one’s gonna want to go back to awd. Your comment is sad 🤦♂️
@@tylerseabook9423 no it sucks on only rwd
Try to make your videos more dinamic.That is more interesting to people.On this way it's boring.
yeah your right, thanks for the advice