I followed the measurements but it stuck to the pan (pan was non-stick) and started to turn yellow. After kneading I didn't get the year drop consistency. I have kept it aside in an airtight box. Not sure how it will turn up after 24 hours. Please guide as to what might have gone wrong.
I used Fevicol Steel flat ladle Regular pan (not non stick) The consistency before cooking was thick and not slimy as you have shown It took less than 5 mins to harden and did not leave the sides. You can imagine the painful task of cleaning the vessel thereafter Kneaded it until went cold. Added additional tablespoon of oil while kneading with a hope that it make me get a break free texture Tear drop didn't come despite kneading for several minutes
Sorry to hear that it didn’t turn out right. To fix it: Flatten your clay inside an airtight container. Create some depressions on the clay surface using your thumb. Fill up each depressed holes with lotion or glue. Close the container with lid and leave it 24 hours. Afterwards take the clay out and start kneading in order to bring it back to tear drop consistency I am not sure what went wrong this time, but in the future be sure keep the temperature low and use a nonstick pan. Try to make a small portion until you get the right consistency. You can always add additional lotion/ vaseline/ white glue to prevent over drying.
@@SharminsArtForum It helped in smoothening the texture a little. I attempted to make Ganesha Idol with it. Any depression I created (example crease mark for dhoti) started to disappear while drying, or the eye socket depth also started to flatten while drying. By tomorrow I hope there will be some of carving left. Is it common for the carvings to flatten during drying phase?
Can I colour the clay with oil paint and make different colours of clay ? And ... In cooking process can I use white oil paint? Instead of white acrylic paint ...
Thank you so much for sharing. Will definitely try it. Seen several videos with different versions. Will try them all and see which one i like best. Yours sems to be the easiest as i can use regular white glue which is easier to find in Africa. I do have a couple of questions: 1. Can I cook it in the microwave using 30 seconds intervals and mixing in between? 2. How long does the unworked clay last before it dries out?
@ Normally I use water resistance varnish. Those are not 100% waterproof. You can try any of them. Here is the link below : 1: a.co/d/gK3jMC6 2: a.co/d/ehjSo9F & I don't have any idea about resin because I didn't work with resin❤️
Hi, how do you fix it if it's loose? I try adding cornstarch as I work on my project but it's making it a little crumbly and easy to break apart. Will re-heating help? Thanks
I’m so sorry to hear that. You can watch the video to fix your problem. Here is the video link: ruclips.net/video/YKs0q3VsYjA/видео.htmlsi=m5eiRHsgqQtZu4jj
@@MariaPereira-bp9lr It depends on the texture of your clay, the quality of the ingredients you used, and natural humidity. Moreover, even after a long time, homemade clay can crack
You can apply Vaseline on clay and store it in a zip-lock bag. Also apply Vaseline on your hands and surface while working if necessary. To fix your clay click the link below to watch the fixing video Here is the link:👇👇 ruclips.net/video/YKs0q3VsYjA/видео.htmlsi=NeYuYDx9HBRzyEY8
I saw someone's video and she made the clay with water and cornstarch ,oil only..i made the same but it's cracking..i made a huge quantity. What can i do to make that crack free🥺
What I can use to stick two dried parts of this clay? Will normal fevicol work to make the bond strong? And how can I make the clay again workable if it gets dried and stiff?
Sometimes using glue is ok, but it create a rigid bond that may come off easily. Instead, you can use clay in between which will create a strong homogeneous bond. Regarding re-working of used clay, I have a video in my channel that will provide you the details.
I want to do this but am afraid because my sculpture is a tree and the branches itself can move some. Will the clay Crack given the branches can move some?
The branch should not be moved, if it moves it may break later. You can add more clay to secure those branches. I went to travel outside the country so I couldn't answer. Sorry for the late reply
Hi! I tried this recipe but didn't have glycerine so didn't give but my clay seems so dry i kept it in an airtight container. Please help me what could i have done wrong .
No problem, You can skip glycerin. To fix your dry clay: Flatten your clay inside an airtight container.Create some depressions on the clay surface using your thumb. Fill up each depressed holes with lotion or glue. Close the container with lid and leave it 24 hours. Afterward, take the clay out and start kneading in order to bring it back to teardrop consistency. Hope this helps you.
You’re welcome ☺️. Glycerin tries to retain moisture and helps prevent cracking (but don't use too much glycerin) You may try another recipe, there are lot of recipe on the RUclips without glycerin. But I’ll share a easy recipe without glycerin very soon. Thank you ❤️
@@maryisnapping Thank you so much for your support. I already made a different recipe but I didn't record the video. Because I thought if I am happy with the result I will make the video. I’ll make it again to to make video as soon as I can. Stay connected and keep supporting 💞
If you follow this clay recipe correctly, then this clay will not crack while drying. I have shared two clay recipes, if everything is followed accurately then it should not crack.
hi there, I saw you making another recipe here on your channel using grated candle wax and soap. which recipe did you like most? thank you for sharing!
I like to use this recipe (Best homemade air dry clay) all the time. If I want to make something flexible like butterfly, fairy wings, flower etc then I follow my flexible air dry clay recipe made of candle wax & soap.
Dear m ne youtube se dekh kr clay bnai thi but wo thori si sticky h ap bta skti hen glti kahan hui h. M n cornflour add kr k b knead kia but abi b sticky h * Should i use white glue which is beast for making slime?
Hi, thanks for sharing this recipe. I followed directions and measurements, because I didn't have Vaseline I replaced with moisturizer lotion. It cooked good, but I needed to add a lot more flour as I was kneading as it was sticky. Do you think that's the result of not using vasaline ?
Hi, I’m not sure you’re using cornflour or flour. I’ve never used flour, so can’t say anything about it. But I think if you cook a bit longer you don’t need to use too much cornflour for kneading. Using some cornflour while kneading is ok. But using too much cornflour can cause cracking while drying your clay pieces. If you don’t have vaseline, you can use coconut oil instead. And stickiness usually subsides after 24 hours.
Glycerin tries to retain moisture and helps prevent cracking (but don’t use too much glycerin) Sorry I don't know about alternatives to glycerin God bless you too.
@@SharminsArtForum You said later in the video you can leave it out wrapped up. I have to find something I can do easy, and useful to be used. I worked with chocolate clay when I did cakes and was good at it but I can't do that anymore. If I can find something I can give that can be used that would be great. I have vanilla extract and I have a orange cleaning project but I need one more and I love the sound of making this clay I'm good at making different shapes and animals and roses but they're to put on cakes I don't know how to create like a coaster or something, please somebody help!
Maybe your clay is over dry. Over dry clay can crack easily while drying. It will be better if you add more glue to make your clay soft. After remake, your clay have to wait overnight to work with it easily.
I followed the measurements but it stuck to the pan (pan was non-stick) and started to turn yellow.
After kneading I didn't get the year drop consistency.
I have kept it aside in an airtight box. Not sure how it will turn up after 24 hours.
Please guide as to what might have gone wrong.
I used
Fevicol
Steel flat ladle
Regular pan (not non stick)
The consistency before cooking was thick and not slimy as you have shown
It took less than 5 mins to harden and did not leave the sides. You can imagine the painful task of cleaning the vessel thereafter
Kneaded it until went cold. Added additional tablespoon of oil while kneading with a hope that it make me get a break free texture
Tear drop didn't come despite kneading for several minutes
Sorry to hear that it didn’t turn out right. To fix it:
Flatten your clay inside an airtight container. Create some depressions on the clay surface using your thumb. Fill up each depressed holes with lotion or glue. Close the container with lid and leave it 24 hours. Afterwards take the clay out and start kneading in order to bring it back to tear drop consistency
I am not sure what went wrong this time, but in the future be sure keep the temperature low and use a nonstick pan. Try to make a small portion until you get the right consistency. You can always add additional lotion/ vaseline/ white glue to prevent over drying.
@@SharminsArtForum Thank you for your guidance 🙏. I have done as suggested. Will check the results tomorrow
@@MeNOnlyMe2606 Hopefully it will work. Let me know if it works or if you have any other questions. I’ll be happy if you get positive result.
@@SharminsArtForum It helped in smoothening the texture a little.
I attempted to make Ganesha Idol with it. Any depression I created (example crease mark for dhoti) started to disappear while drying, or the eye socket depth also started to flatten while drying. By tomorrow I hope there will be some of carving left. Is it common for the carvings to flatten during drying phase?
I like the recipe.is a gd art
@@JumiahAnis Glad to know you like it❤️
Thankyou for sharing the recipe will definitely try ❤
Most welcome 💞
Superb, beautiful and very very nice work I ❤ you and your art work. Thankyou very much.
@@deepikasonawane23 Thank you so much 😊❤️
Thank you for sharing.
Glad you like it 💞
I tried this recipe & works great for me. My clay doesn’t crack now.
Thanks for sharing the useful recipe❤️❤️❤️
Thanks for your feedback.
It’s means a lot to me ❤️❤️
Don’t forget to share with your friends and family.
@@SharminsArtForum Definitely I’ll do that ❤️❤️
@@RumaAkter-mx8tc Thank you 🤎
@@SharminsArtForum welcome 🧡
How's that possible in the above some body says that this recipe doesn't work and ur saying it's work
Can I colour the clay with oil paint and make different colours of clay ?
And ... In cooking process can I use white oil paint? Instead of white acrylic paint ...
Thanks so much for this recipe. Your projects are pretty.
Thank you so much ❤️
Thank you so much for sharing. Will definitely try it. Seen several videos with different versions. Will try them all and see which one i like best. Yours sems to be the easiest as i can use regular white glue which is easier to find in Africa. I do have a couple of questions:
1. Can I cook it in the microwave using 30 seconds intervals and mixing in between?
2. How long does the unworked clay last before it dries out?
How to make article made with this clay waterproof? Or water resistant...
@@mitalitalekar5721
You can apply waterproof varnish or epoxy resin after completely drying your clay piece.
@@SharminsArtForum Can U suggest me best brand for resin and varnish ?
@
Normally I use water resistance varnish. Those are not 100% waterproof. You can try any of them.
Here is the link below :
1: a.co/d/gK3jMC6
2: a.co/d/ehjSo9F
& I don't have any idea about resin because I didn't work with resin❤️
How u clean your clay from sticky dust on ur clay? Did u use isopropyl alcohol or anything else??
Hi, how do you fix it if it's loose? I try adding cornstarch as I work on my project but it's making it a little crumbly and easy to break apart. Will re-heating help? Thanks
I’m so sorry to hear that. You can watch the video to fix your problem.
Here is the video link:
ruclips.net/video/YKs0q3VsYjA/видео.htmlsi=m5eiRHsgqQtZu4jj
How to use this clay for making fairy houses using plastic/glass bottles. Do I need to use fevicol to stick it to the surface?
Yes, You need to use fevicol ❤️
@@SharminsArtForumthk u for replying. After applying on jars will there be too much shrinkage or cracks?
@@MariaPereira-bp9lr It depends on the texture of your clay, the quality of the ingredients you used, and natural humidity. Moreover, even after a long time, homemade clay can crack
Hi. I tried it yesterday it worked but now its I made this clay before 3 days but now it's sticky on polybag and also in hand and surface.. what to do
You can apply Vaseline on clay and store it in a zip-lock bag. Also apply Vaseline on your hands and surface while working if necessary.
To fix your clay click the link below to watch the fixing video
Here is the link:👇👇
ruclips.net/video/YKs0q3VsYjA/видео.htmlsi=NeYuYDx9HBRzyEY8
Thanks for sharing 😍😇
Welcome 🙂
Don’t forget to try this recipe.
I saw someone's video and she made the clay with water and cornstarch ,oil only..i made the same but it's cracking..i made a huge quantity. What can i do to make that crack free🥺
Can I use face moisturizer instead of body lotion?
@@mitalitalekar5721 No, the lotion is better but you can skip it if you want. Sorry Couldn't reply because I was sick for so long
@@SharminsArtForum It's ok.. No problem... Thank you ❤
@@mitalitalekar5721 Most welcome ❤️
Beautiful, keep safe and may God bless you always, I do DIY and recycling, friend from Philippines
Thanks for your appreciation.
💕 from USA
Stay connected and keep supporting love 💞
What I can use to stick two dried parts of this clay? Will normal fevicol work to make the bond strong? And how can I make the clay again workable if it gets dried and stiff?
Sometimes using glue is ok, but it create a rigid bond that may come off easily. Instead, you can use clay in between which will create a strong homogeneous bond. Regarding re-working of used clay, I have a video in my channel that will provide you the details.
We can use maida inserted corn flour please reply
If you use flour you will not get a smooth finish and you will not get a perfect result
If baby oil not available which oil could I used for alternative
You can use vegetable oil or coconut oil
Have you ever added a drop of bluing to this for a white white?
No, I haven't added any bluing liquid or powder, only used acrylic white paint. But it is optional
Is this no cooked method. Thank you so much
No dear. This is cooked method.
Thank you for the recipe but I have a query, can I use fevicol instead of school glue?
Yes, you can use fevicol instead of school glue.💞☺️
@@SharminsArtForum
thank you🙇
Most welcome 💞
Which varnish u recommend to make the clay waterproof?
I use Liquitex Professional High Gloss Varnish.
You can apply several coats to make waterproof
@@SharminsArtForum Thank you for ur reply 💝 God bless u 💫
@@mitalitalekar5721 God bless you too💞
Can I use pva glue instead of school glue?
Yes you can
I forgot to apply Vaseline before leaving the clay to set for 24h now it’s sticky I have applied the Vaseline n left it to set, when should I use it?
You can use it now or leave it for 24 hours. If it still feels sticky, you can use coneflower/vaseline while you work.
I want to do this but am afraid because my sculpture is a tree and the branches itself can move some. Will the clay Crack given the branches can move some?
The branch should not be moved, if it moves it may break later. You can add more clay to secure those branches. I went to travel outside the country so I couldn't answer. Sorry for the late reply
Hi! I tried this recipe but didn't have glycerine so didn't give but my clay seems so dry i kept it in an airtight container. Please help me what could i have done wrong .
No problem, You can skip glycerin.
To fix your dry clay:
Flatten your clay inside an airtight container.Create some depressions on the clay surface using your thumb. Fill up each depressed holes with lotion or glue. Close the container with lid and leave it 24 hours. Afterward, take the clay out and start kneading in order to bring it back to teardrop consistency. Hope this helps you.
Thank you dear for the recipe , may I know what the glycerin do ? Because I don’t think I can find glycerine where I live .
You’re welcome ☺️.
Glycerin tries to retain moisture and helps prevent
cracking (but don't use too much glycerin)
You may try another recipe, there are lot of recipe on the RUclips without glycerin. But I’ll share a easy recipe without glycerin very soon. Thank you ❤️
I’m looking forward to it , thank you sooo muchh , lots of love 💕
@@maryisnapping
Thank you so much for your support. I already made a different recipe but I didn't record the video. Because I thought if I am happy with the result I will make the video. I’ll make it again to to make video as soon as I can. Stay connected and keep supporting 💞
How to avoid the clay from cracking after getting dry?
If you follow this clay recipe correctly, then this clay will not crack while drying. I have shared two clay recipes, if everything is followed accurately then it should not crack.
This is remarkable 👏 great work
Thank you ☺️
hi there, I saw you making another recipe here on your channel using grated candle wax and soap. which recipe did you like most? thank you for sharing!
I like to use this recipe (Best homemade air dry clay) all the time. If I want to make something flexible like butterfly, fairy wings, flower etc then I follow my flexible air dry clay recipe made of candle wax & soap.
Dear m ne youtube se dekh kr clay bnai thi but wo thori si sticky h ap bta skti hen glti kahan hui h. M n cornflour add kr k b knead kia but abi b sticky h
* Should i use white glue which is beast for making slime?
You can add Vaseline, knead throughly and leave it for 24 hours. Let me know the result ❤️
Hi, thanks for sharing this recipe. I followed directions and measurements, because I didn't have Vaseline I replaced with moisturizer lotion. It cooked good, but I needed to add a lot more flour as I was kneading as it was sticky. Do you think that's the result of not using vasaline ?
Hi, I’m not sure you’re using cornflour or flour. I’ve never used flour, so can’t say anything about it. But I think if you cook a bit longer you don’t need to use too much cornflour for kneading. Using some cornflour while kneading is ok. But using too much cornflour can cause cracking while drying your clay pieces. If you don’t have vaseline, you can use coconut oil instead. And stickiness usually subsides after 24 hours.
@@SharminsArtForum Thanks for replying, yes it was cornflour, and I cooked it till it was a big lump and then a bit more. Fingers crossed it's ok 🤞
@@donnabice273
Oh you’re welcome
Take love from LA
@@SharminsArtForum You too from Australia
What can I use in place of gyceran or coconut oil?
Wow it is very useful dear😍😍 thank you for sharing
Thank you !
Can i skip glycerin ?
@@piudas8199 yes, you can skip glycine. I have given another recipe in my channel for making clay, if you want you can follow that.
How long does it to take for it to dry out
It depends on the amount/size of the clay piece. It could take 24 to 48 hours depending on the ambient weather condition. Sorry for the late reply
What does the glycerin do? Is there a substitute for glycerin? TFS and God Bless
Glycerin tries to retain moisture and helps prevent cracking (but don’t use too much glycerin)
Sorry I don't know about alternatives to glycerin
God bless you too.
@@SharminsArtForum thank you so much🥰
@@designsbydawn976 Most welcome 💞
Thank you
Going to try it out. I'd like for jewelry wish me luck. I will let u know how it goes. Thank u❤
Best of luck 🤞🏼 I hope you will get good results.I will wait for your update. Have fun 🤩 Thank you❤️
Thanks for sharing mine came out just right I make in small batch after it's over I make again👍🙏
Glad to know it worked for you. Enjoy your craft💞
Does it grow mold
If you follow the instruction properly I hope it will not grow mold , I have never seen mold in my clay.
❤️❤️❤️
💞💞💞
Kaise banaya mam pls
Pura video dekhkar apko samaj ajayega 💞
Do you have to put this in the fridge?
No,Room temperature
@@SharminsArtForum thank you sorry I didn't what.
@@sandrapalmer5642
Why you are sorry ?
@@SharminsArtForum You said later in the video you can leave it out wrapped up. I have to find something I can do easy, and useful to be used. I worked with chocolate clay when I did cakes and was good at it but I can't do that anymore. If I can find something I can give that can be used that would be great. I have vanilla extract and I have a orange cleaning project but I need one more and I love the sound of making this clay I'm good at making different shapes and animals and roses but they're to put on cakes I don't know how to create like a coaster or something, please somebody help!
@@sandrapalmer5642
I’m not quite sure what kind of problem you seem to be having. The narrative you provided is difficult to understand.
Está massa fica flexível depois de seca???
Que fantástico! Me ajudou muito. Obrigada.
Rosane Zanola - Brasil 💋
Thank you ❤️
Stay connected and keep supporting
Will it break like a piggy bank when hit ?
Yes, it can break like a piggy bank if hit hard, but it depends on density and how thick or thin the clay bank layer is. Thank you
Okay thank you (:
@@msl0986 You're most welcome 💞
Can the craft made out of it catch fungus?
No, but use varnish to be on the safe side🙂
Sehr schön❤
Thank you 💞
🧡🧡🧡
Thank you
@@SharminsArtForum welcome 🙂
What is the substitute for glycerin?
Sorry I don’t know about substitute to glycerin.
can the finished art pcs last long?
Yes! Some Projects I made Four Years Ago and they are Still In Good Condition.
هل يمكن كتابت المقادير في التعلقات من فضلك
Measurements plss, thank you
Measurements are given as text (close caption) in the video, please check.Thank you
Why you have not used soap in this recipe? Soap is not necessary?
No dear, soap is not necessary for this clay. Soap clay is a different type of clay. You can find a lot of soap clay recipes on RUclips.
It still cracks!!!
Maybe your clay is over dry. Over dry clay can crack easily while drying. It will be better if you add more glue to make your clay soft. After remake, your clay have to wait overnight to work with it easily.
@@SharminsArtForum Hi, thanks for your reply, but I solved the problem this morning! I didn't add glue.
8