Watching your videos actually helped me decide on purchasing my B2601. Had the tractor for over a year now and absolutely love it! Always look forward to your video posts to see what tips and projects I can do. Keep 'em coming!
Good evening Mark! Happy you are enjoying it. I love this little tractor a lot. Great for my 4 acres here. Thanks for watching and for the kind comment. All the best!
Excellent video Gord . It was like going back in time when you mentioned all of the things that you've had done to the tractor . I've watched every single video . Many great tips for new tractor owners and guys thinking about getting one . That diesel conditioner really works . Got mine at Canadian Tire on sale . I had a check engine light on my truck and the dealer said it would cost me $1300 to fix the problem . My buddies mechanic put some of that stuff in the fuel tank . Filled the tank and went for along drive . Check engine light gone . That stuff worked . Cost , maybe $10 . Always buy your fuel at places that sell a lot of diesel. This way you're sure to get winter diesel . Small mom & pop stations still might have tanks filled with summer fuel . Yes , big difference in summer and winter fuel .
FYI you can buy conditioner for low sulfer diesel engines, like the B series, made by the same manufacturer as shown in the video. Comes in an orange instead of green container. I bought mine at a local NAPA store in Canada.
I really enjoy each video you put out. Not only are they informative but entertaining but everytime I watch I think of Guy your neighbor. Please tell him we are thinking of him and for him to get well soon.
Good morning and thanks very kindly Rick. he is getting better but it is a slow one for sure. He is up and about a little more now but not much. I will pass along your kind wishes Rick. Thanks again and have a great week!
A lot of great tips for any tractor owner! Thanks GP! I wish this video was a around when I bought my tractor! lol Hey! Thank you for your very kind words! You don't know how much I appreciate that!! Thanks again my friend!!
That's funny, I bought my Kubota brand steering wheel knob at the dealer the day I ordered my B3350HSDC. I love it. It was all I had for the month I waited for my tractor to be made. When I installed the knob I didn't realize that it didn't matter where it went on the wheel since the hydrostatic steering really has no center. Sometimes the knob is on top and other times it's on the bottom or to one of the sides with the front wheels straight. Thanks for the great content! Cheers!
LOL! That is funny. I had the same thing happen to me. Except I thought the steering was broken and called in for warranty service. They explained to me it wasn't broken and how it worked. A little embarrassing at the time but we go a good laugh from it. Thanks for watching and for the great comment this morning! Cheers!
Kubota offers the best insurance policy when you actually finance your tractor trough your dealership. Another tip, if you have a lot implements and you have animals like horses, etc., you be better with a farm type insurance then a residential one. My recommandations are based on Canada, Quebec and Onrario legislation. Great video, most of the mods you propose I did when I purchased my 2650 last year.
Thanks Eric - great point about the farm insurance , if you run a farm. However, respectfully, I have to disagree with you on the KTAC - I am not sure that the KTAC is the best, and it is too expensive for the limited coverage you receive, IMO. Duliban Insurance, here in Canada, is the only broker with standalone Compact tractor insurance (Called Tractor Protect- you can check it out on their website if interested), - the KTAC has no 3rd party liability , as I understand it - it only fixes the tractor. The Tractor Protect policy I sourced and now have in place from Duliban, gives me $2 million 3rd party liability and the insurance is in effect whether working on or off my property (my original rider on my homeowners policy only covered me while on my property and had no 3rd party liability). Hands down, I would offer that if I run my buddy over, cause personal injury to someone, or hit a car on the county road or cause damage to his property, the cost of fixing the tractor will be my least concerns. KTAC does not cover those things- it only covers the cost of fixing the tractor. I did a few videos on it - they are on the channel homepage listing, if you are interested - I spent a lot of time and research on the subject. Hope it helps a bit - wish you all the best! Thanks again!
Hi GP! I am enjoying my new tractor, the B2601. Because I religiously follow your channel I already knew about some of these mods The ones I like the best are the carry-all and the side step. I got my carry-all frame from Tractor Supply Company here in MN. I think it was about $140. I had no idea about the step until you told me about it. But, you are right, I couldn't put it on until the belly mower came off. But it is in place now! It is a great addition. I have a Dealer installed roof on my B 2601 which is attached to the ROPS. Because of the roof, which can't be all loose when it is attached, they installed a bolt in the same nut that you installed your bolt to keep everything tight. I will be very interested in hearing about how the tire chains work for you this winter, which is not far off! Great video, thanks!
Good afternoon Michael! Good stuff! I like your roof too. I'll bet that helps to keep you cool in the summer and dry in the winter. I'm looking forward to trying out the chains - stay tuned! LOL. Thanks again and happy to hear you are enjoying the new tractor. Cheers!
B2601 owner here your channel was a huge factor in buying decision March 2019 :) 48.6 hours on machine atm I really like your tip on stocking extra set of filters :)
Hi GP Great video as always A simple mod I have done to both my tractors is to glue a magnet to the top of the fuel caps so that when I fill up with fuel the cap stays on the hood of the tractor and doesn’t fall off if I forget to put the cap back on, I have lost two caps because I got distracted and drove off without putting the cap back on, the magnets work well. Michael 🇬🇧
Good morning Michael. That's a great idea! I have also almost forgot a couple of times to be honest. I usually lay it on the floor by the pedals and have hopped up the tractor to start it. Thanks for sharing! Cheers!
I have a Quick Hitch on my B2620 rear, I never knew how to mount the top hook until I saw your video, now I need to redo my set up. Thanks! But I think my two rear attachments are not quick hitch compatible, I have to take the hook off and mount it with the opening facing towards the tractor, like a C not a U..
As for the bolt in the ROPS mine was a standard thread 3/8 x 18. I couldn't believe it was an SAE so I ran a M9 x 1.25 tap in it first but I couldn't find that bolt. The 3/8 x 18 works great. I used a Canadian company Bro-Tek for wheel spacers. I put 3" on the back and 1.5" on the front along with Rim Guard in the rear tires, it can handle 30 degree grades with no problem.
I don't have a tractor GP but those are very good mods or attachments for sure.....tractor owners I'm sure will appreciate them......have a great week coming up and take care my friend...... :)
Really enjoy your videos! I'm in the market for a tractor, my first, and have learned a lot from your videos. I plan on visiting dealers and putting boots on the ground, so to speak, before making the big purchase. Your videos have really helped think about what questions, applications I may have before making that visit. It's really refreshing watching you work through things, sometimes for your first time. it really relates to anyone who's going to be or is a first time tractor owner. It's much appreciated and I know is a lot of work! Thanks again and keep the videos coming! I think everyone would enjoy watching them, tractor owner or not. Doug D Murrayville, GA. USA
Good morning and thanks very kindly Doug! I really appreciate the feedback and I am very happy that it is helpful to folks, especially folks new to tractors such as myself. That's pretty exciting to be looking for your first tractor! Good luck and all the best. I would enjoy hearing when you finally get your first tractor. Cheers!
@@GPOutdoors Thanks for getting back with me. I will absolutely keep in touch and let you know which tractor I purchase. Yours seems to really serve you well! I especially like your videos on using the attachment. On a side note I'm looking at log splitters also. Yours seems to really be a time saver with the dual stroke splitting! Of course we dont need as much wood in Georgia as our northern friends but still supplement our furnace with a wood fire whenever were home. Just how much wood do you go through in a season? What other heating sources do you utilize if I may ask. Just curious as our winters are pretty mild and it seems yours are quite cold! Take care, Doug Davis Murrayville, Ga
Good day Sir, your video on the insurance for the tractors was an eye opener for myself, by getting the proper insurance coverage was very important, so I can go see Joe now !!! and save 1/4 of the cost of the insurance !!! Thanks again GP !!! Cheers !!!
LOL. Me too Dave. better coverage including off property and on road and only a little bit more than my current insurance which only offered on property. Enjoy the rest of the weekend! I still have to watch your latest video so will settle in with a warm drink and watch soon. Cheers!
I don’t have a tractor yet but I hope to purchase one in 2020. Between watching your videos and the research I have done it will definitely be a B series and most likely will be a B2601. These are great ideas that you have shared only a couple of which I have already planned on doing. Thank you so much for all the time and effort you put into providing us with your videos. Take care and keep on “tractoring”. God bless.
Good morning and thanks John! It's great to hear you have been researching for a while before you make your purchase. It's a big decision and so many brands and models to choose from. I am happy the videos have helped a little. All the best and good luck! Cheers!
As Jeremy said, you are closer to a pro than a beginner. I must say that a nice thing about your channel is that you remember well what you had to learn. Then you also have a very good way of teaching it to "real" new tractor owners. Thanks GP!
Thanks Joe! So very kind and I appreciate all your support and help over the last 2 years. Have a wonderful week and hope to catch up with you again soon. Cheers!
This video is great. Newbie or long time viewer, Taking the time to review really helped me to think about what I still need to do for my tractor. Thanks.
Hi GP great video. I have added both implements and mods based on your videos. Keep them coming. We're practically neighbours - I live about an hour south of Ottawa. Think I have the same grapple as you! I found an attachment from Work Saver that goes on the loader and allows me to attach the carry-all on the front of the tractor. Biggest benefit is I now have a portable work bench that I can raise as high as I need. Great for working outside on things like push mowers and my portable generator.
Good day L4060. That's a great idea - portable work bench! Nice. Yes I think I would only be about 2 1/2 hours from you. I used to go up regularly when my daughter attended Carlton. Thanks for saying hello this morning and all the best!
I purchased a steering wheel knob for my 2301 earlier this year after watching your videos GP, I love it! Couldn't believe I had been operating tractors for over 20 years without one.
LOL. So funny Fred! I had so many subscribers suggesting I get one for a long time and I didn't think it was of much value till I saw it on sale at the store and figured I would try it. Same as you, I cannot believe I didn't put it on right away. Thanks and enjoy the rest of the week!
My two or maybe call it three best mods to my 2601 are, Milsco V5400 air ride suspension seat, and added rear remotes with hydraulic top and side link. These mods are a real game changer for your overall comfort, and makes so many of the rear attachments so much better/easier to use.
Hey thanks! Some great adds there. Especially like the idea of an air ride seat. It gets pretty bumpy on the lower back in the forest. Thanks again for sharing and all the best!
GP, My new B2650 hasn't arrived yet and so I'm stuck watching RUclips videos and salivating over which mods I want to get for it. One of the mods I've been thinking about is guards for all of the filters; after your comment about rocks in the forrest, I've decided to get the ones that Paul Short makes over at Specialty Repairs Custom Mods..... Ground clearance has never been a problem with my M9540. I've always kept the extra fluids and filter on hand in the shop, but I never thought about needing to changing them because they were accidentally damaged. Thanks for sharing your experience.
Good day Tracey! It's tough waiting for the tractor delivery, isn't it? Kind of like waiting fro Christmas when you are little. Hope it gets there soon. Great practice to keep the extra fluids and filters around, I think. Good luck and let me know how it goes! Cheers!
Great advice for any new compact tractor owner. One mod I noticed you haven't done yet is to frame in with metal your turn signals. I haven't either and already busted two clearing out trees with my backhoe.
Good day K&C! Thanks for the great idea. I did think through it last year, and perhaps I can get Guy to help me make a frame, if I decide at some point to do it. I did find one place here in Canada but it was cost prohibitive. I could replace the lenses 5 times for the cost of the frame and since I have made it 2 years working in the forest without breaking one, I figured the risk was worth it. But then again, I don't do BH work with it so it might be a good idea for you folks to consider, given the work you are doing with it. Thanks again and all the best!
Hello GP! Took delivery of my new L3301 with loader last Wednesday. My dealer filled the rear tires with fluid as standard prep (so no worries about extra ballast) and 3rd function valve for a grapple from Everything Attachments here in North Carolina. Your vids were instrumental in my buying decision. Always look forward to your practical tips. Cheers from Linden, NC USA!
That's great! Congratulations! You must be really happy. Enjoy your new tractor and all the best! Let me know how it is going from time to time. Cheers!
We don't have a "B" series tractor, we have the "L" series, but some great tips anyway. I had already put the metal on the front guard, need to add extra lights. Thank for sharing.
I send my customers to Duliban insurance all the time. They are very easy to deal with and can provide customer coverage for your application. Shoutout the them.
How's it going GP that was some good advise especially the insurance... I updated my homeowner policy and it was cheaper to include the tractor rather then have a separate policy.. Also learned what my limitations were... God Bless...Chief..{NYS/ADK}
Going very well Chief! Family is good and that means I am good. LOL. So nice to hear from you. Great to hear you reviewed your policy and all is good. Have a wonderful week my friend! Cheers!
Good morning and congratulation on the tractor, Ram! Happy if the videos helped and very happy you got the right tractor you need. Many folks have said the 3901 is a great machine - hope you get lots of use from it. All the best!
Hey I just stumbled upon your channel.....I had a 2012 BX2660 and recently up graded to a '16 B3350..I have done a few mods you mentioned and my ROPS had those bolts installed on both sides to stop the rattling and it is OEM. I will check out more of your videos and Im in Central IL USA so we get winters like you do but probably not as frequent or violent lol !
Good morning Metfan! Welcome to the channel! Funny they don't come with the 2601. But hope you enjoy your tractor. I imagine you are getting ready for the snow too! Cheers and thanks for watching and for the comment this morning! Cheers!
Another great video GP . . . I like the grill safety screen, but I had to remove my grill to install my 3rd function valve. It came with a universal bulkhead mount that did not clear the grill on the B2650 with cab. Keep up the great work Sir . . .
Good morning and thanks Scott! A couple of folks have suggested mirrors. I may look into them - my back does not like twisting around too much anymore either. LOL. All the best!
We are going out Wednesday to look at B series tractors. Well ok really to get oil and filters, but hey, while we are there no harm in looking. great video GP.
Not knowing all of the accessories available for a Kabota B series, I wish I would have gotten a rear weight rack instead of the land pride ballast box. Funny how hindsight is always 20/20.
Excellent informative video. Thanks for all the tips. Hope all is well and hope Guy is doing better. Many blessings to you and yours. Be safe..wont be long till the white stuff is falling on the ground...lol
Hi GP, I just inherited a 10 year old Kubota B3200 with a LA504 loader and belly mower. My dad passed recently so I been sorting it all out. But it's a nice tractor.
Hey MNP. I am sincerely sorry to hear about your pops. This has to be a very tough time for you and for your family. For what it is worth, from me to you, remember all the good things, and as my gramma used to say to me, be thankful for all the time and experiences you had together, not the future. Life is a gift and perhaps focus on all the wonderful time you had while he was here. I will keep you in my thoughts and hang in there as best you can. Cheers and all the best MNP.
@@GPOutdoors Thanks for the kind words GP and glad to see you and Guy doing well. Yep it's what I focus on. Well now I have a B3200 with 200 hours of grass mowing. So' I'm gonna turn it into a tree tractor with grapple/3rd function and a PTO driven wood chipper and a sawhaul. Was thinking of just trading it for a L3901, but this tractor runs pretty good and no Tier 4.
Hey GP, another informative video. I'm going to look into quick hitch capability for my BX 23S, I just purchased the basic package that did not include quick attach for my FEL and since I have the back hoe that is part of the frame I have to remove it to use my brush hog. Since my memory fails me too often it's a new learning experience every time I do it. lol. once again great info.Thanks for sharing Cheers
Good morning Roy! LOL. Me too, honest. I have to write everything down or I forget. Great that you have the BH. I am sure it comes in pretty handy for you. Thanks again and have a wonderful day!
Very informative. I have four Kubotas up to 85HP and am strongly considering a B2601 this winter or spring. Additions I always add are chain hooks for the loader bucket, usually weld on but Kens Bolt Hooks are an option if you don't weld; at least one rear remote for hydraulic top-link, I usually get two for TnT; step from Specialty Repair there in Canada. I live in the hills and add wheel weights. On some, I add hazard and tail light protectors and I just bought an adapter for the rear differential lock. Check Paul Short at Specialty repairs, he has some really nice additions for sever Kubota models including the B01.
Great video. I added 3" wheel spacers and it increased the stability of the tractor dramatically. Another mod I did was a tool box carrier. I would send a photo if you provided an email as can't attach to this comment.
Thanks so much Evan! They are great folks to deal with from day one. Quick parts delivery every single time and always willing to answer all my questions. Thanks again and have a great week!
new owner of a B2601 and new to the quick attach bucket, pallet lift and snow blade. My first experience with the moving of these implements is when the driver dropped all off in my driveway!!! Took me 2 hours to attach, un-attach and move all around to where I wanted them stored and re-attach the bucket to the tractor - I know there must be a very easy method to attaching and un-attaching that I missed seeing as the dealer demoed it to me. Do you have a video of this that I could watch
I need to do that expanded metal grill guard mod sometime. I spend quite a bit of time in the woods with my B2650 so it’s just a matter of time before I get a stick or branch up through there. Nice vid as always, GP. Have a good week!
Rainy days were some of my favorite days as a kid. Those were days we spent repairing equipment by opening the double doors on the blacksmith shop and back in whatever piece of equipment needed repair. A nice list of suggestions GP, for just about any tractor owner. A very good video sir, but we are all missing Guy and his suggestions too !! Non sequitur question: Are your solar panels connected to a battery storage system? You have the right to refrain from answering....LOL.
LOL. Good morning T! Yes, missing Guy as well. Yes, it is a full off-grid system. No utility connection here. The utility power goes out so often up here I am not sure it would be of any help. I did a video (#8) on the system way back, if you are interested. Keep smiling!
@@GPOutdoors Great !! I'll go back and have a looksee. I think it was around your 110-120 mark (??) I subscribed and though I did go backwards and bounce around sporadically I have not seen them all. My bad )-: Thanks for the tip the vid's location. I'm now recalling possibly a comment during the generator servicing videos about the lack of utility supplied power. Boy it sure is hell getting old. (-:
Gord, another excellent video! I'm sure other subscribers, like me, would like to know a little more about you. You are a very interesting guy. Not prying into your personal life, of course, but just a little bio of your background, how you came by your "cabin" etc. would be interesting.
Thanks so much Paul ! An interesting idea - I'll give it some thought although I am not sure it would be a very interesting video for folks. LOL. I do appreciate your kindness though. I appreciate the interest. I will perhaps try to include it into a future video. Thanks again Paul and all the best!
Good morning and thanks Kevin. LOL. I paused because I couldn't;t remember the name . LOL. That was it. Thanks for sharing and glad the video was a little helpful. Have a great week!
Another very informative video GP, you have come a long way in a short time. Are you a teacher by trade because you are great at explaining and teaching things. Very helpful tips for all tractor owners. Can't get enough of those overhead shots of your property. I think another project you may consider worth doing is to add mirrors to your tractor.
Good morning and thanks very much Mark! LOL. No , not at all but appreciate your kind comments. Mirrors are a great idea! Will help a lot and save me having to twist around in the seat - the old lower back doesn't like doing that anymore. LOL. Cheers and thanks for the idea!
Now this go around You get to give us some great tips! You as well helped me out by making me think of a few things that hadn't crossed my mind. Great Video GP! 👍☺
Hey good afternoon BB! Well, I am happy there were a couple of things in there you might enjoy. You've helped me out a bunch! Have a great week out there!
Fantastic Gordy! This video sums up why I watch your channel (and will continue). How about some love for us bx owners? Great job and give my best to Guy! Cheers
LOL. Thanks so much Tom! I am happy you enjoy and I certainly enjoy talking with you. I wish I knew more about the BX but perhaps soon. My older brother just bought one for his property. Looking forward to seeing it soon. Cheers and all the best!
Great collection of mods. and accessories. You have mentioned some of these over time but it is good to get them in one video. You have shared maintenance tips from time to time. Maybe you could collect them together too. How is Guy doing? Take care all.
Thanks David. A good idea for a future video. Thanks so much for asking. He's getting better and getting out a little here and there now. Long recovery unfortunately. I'm sure he will see your comment and appreciates it very much. Cheers and have a great week!
Busy Bee Tools has different knobs. Do a search on their website for knobs, it should show what they have. I bought a couple adjustable knobs for a chainsaw holder I made.
I am a new Tractor owner and this is my first time to watch your show. I really enjoyed it and very informative. Have you heard of anyone putting cameras somewhere on or near the loader so you can see the front edge position of the bucket? Or how about on the back of the tractor so you don’t have to constantly twist around to see the back?
Hey good evening Nelson and thanks for tuning in. Congrats on the new tractor! Yes - Roger on the RUclips channel 'Tractor Tech' did a video on putting a camera facing front and facing back. (not on the bucket, but on the front of the cab to see the front (you can find it on his channel). However, I am pretty sure you may find that you will still look backwards, but perhaps not as much. I don't know from experience but just my feeling is that the camera sees things closer or more distanced. Good luck and wish you all the best!
Gord, thanks for another great video. It would be super helpful if you added all of the part/model numbers into your comments as well as the videos. I dont mind rewatching your videos but that would expedite ordering parts when I'm/others are ready.
Winter is coming, I may not be alone with this, please do a video when you hook up your snowblower. Also it would be great to learn about your hydraulic chute deflector and rotator. Awesome video, always learning from you
Good video. Maybe a video in the future to list your subscribers mods taken out of comments. Also invite input on mods that have not been mentioned in the comments. Thanks and have a good one 👍
I have a B3200 with 950 hrs. It is my fifth Kubota. 1600, 75??, B2400, B2710, and B3200. i've always used the glow plugs for starts even in moderate weather, it just starts easier. I remember someone explaining alot of gray smoke on startup and nothing after that. Whatya know about that boys and girls?
Heyhey Gord my B2601 came with a knob on the ROPS to prevent rattling. Maybe my dealer just does it on their tractors. I did not know that it was not the standard. Good tips. Thanks
Excellent video, curious how the solar panels hold up in winter with all that snowfall you get.. obviously buried but structurally. Assuming that's a viceroy home. Do you think you would ever trade your tractor in for a cab b2650.. for warmth
Good evening CM! Some good q's. Structurally - not a problem but if I want to save on running the back up generator , I often need to use a roof rake to remove the snow off them. Remarkable things I can tell you. Even on the most overcast days, they still generate power - not as much of course but somehow they still generate. It is not a Viceroy home actually - I did include Viceroy in my research and analysis but I purchased from Linwood. One day depending on ho things go, I would really love to trade in for a cab. I think with experience, I will be sharp enough to get through the forest without shattering any glass and would really enjoy having heat in the winter and also keeping the flies away through the early summer. But I think that will be a long way off. I do have to say that I am happy that i didn't get a cab model while I am still learning in the forest. I am pretty sure I would have busted a panel or two by now. LOL. Hope you are doing well. I did look into those shirts you suggested - thanks! Be well CM!
Thank you for the video. Have you ever had to replace your glow plugs before? If so will you send me a link for how to replace them? I have a 2015 kubota L3301 4x4 and I have no idea where they are located.
Excellent tips that I very much appreciate!! I'm taking delivery of my new B2301 next week, and will have all Winter to get some of these improvements completed! One question that I have...does the grill guard reduce the effectiveness of the headlights of the tractor much? Thank you so much for the outstanding videos and "no-nonsense' information!
Good morning Thomas! It's a big day today! Congratulations! I'll bet you didn't sleep a wink last night. LOL. Honestly, the headlights are very ineffective and not much help at night. The bucket blocks them so you get very little sparse light in front of you. Try it tonight after dark. That's why everyone puts work lights up on the ROPs. If you don't ind me mentioning, I tried couple different lights - the lights I have as I noted are 1160 Lumens, and it gives great light front and back - and it illuminates fr down the road. They are great way better then the last one I put in first. If you are going to put lights in, make sure they are at least 1100 Lumens for sure. The lights I have have 5 bulbs in them. the two outside bulbs are flood light style so it lights up the sides of the forest in front of me and the three in the middle of the light are direct lights that shoot forward. Great lights and a great price. They have lasted almost 2 full years, through two winters and still working great. Good luck and all the best today. Enjoy your new tractor Thomas! Cheers!
Thank you so much@@GPOutdoors! Your reply makes a lot of sense. I have heard other tractor owners complaining about the headlights bouncing off the back of the FEL and being ineffective before. My current tractor (1991 John Deere 430) had the grill take a beating over the years due to not having a brush guard at all, and I don't want my new B2301 to suffer the same fate! I will surely add the additional lights, and have your videos #9 and #12 bookmarked for reference! The tractor will be delivered 11/4, so I have a few sleepless nights to suffer between now and then, LOL! Thanks for the thoughtful reply, I appreciate your time!
Thanks Clif. Not sure the size but I bought them from canadianchain dot com. I just had to click on the tire size (the number you find on the side of the tires) and they send the correct length/size of chains. Simple ordering. They had several different types of chains. These ones are called H pattern V-hook, chains. Very aggressive. Hope that helps a bit. Cheers!
If you tell folks you put a knob on your ROPS they will think you a bit kinky. I just used a metric bolt and nut on mine. Put a nut on yours to lock it in place. If it comes loose it could fall off without you knowing it.
Good afternoon GP . Good video full of great information for folks! Have you tried going over your trails with the tractor and snow blower yet? It’s good that you are all tuned up for winter. You mentioned about you and Guy possibly getting logs hauled in to cut and split? Sure would hate to see you folks getting cold this winter? Hope everyone and everything is okay up there. Thanks for sharing with us.
Hey good day ODD! No snow up here except a few flurries so have not had a chance to changeover to the blower yet - but hey, I did do all the maintenance and prep on it so I am ready. Been working on the wood now for a bit - a few videos are coming out in the next week. All good here and hope all is great with you too. Thanks and talk again soon ODD!
I don't think so ODD. Would be nice to clear them for winter walks but too much debris and things that could get caught in the blower I think. Take care!
I have the same FE snowblower and successfully cleared my hilly trails last winter. Just be sure to raise the skid plate to the max. I too have chains and spacers for my ballast filled wheels. On slopes it helps to drop your box blade to create some drag as you go downhill.
Thanks GP still have not decided what tractor L or B has been a very difficult for me into my 4th month of indecision. I have watched many of your videos. Regards
Good evening Lee. It's a tough decision especially if it is your first tractor. I am happy the videos have helped a little. A few things, if you don't mind me offering. I spent months on it too. I have learned that if you have more than 5 or 6 acres, you most likely need to consider the L. Hard to explain but I am fortunate that my neighbour has the L and if I had more than this 4 acres, I would have purchased an L for sure. Heavier, more capacity and larger, higher ground clearance, among things. You don't want to buy something and find out it is under powered for all your needs. I know that probably didn't help much ( LOL) but if you have a larger property than mine, and it is affordable for you, try to buy the most tractor you can afford, ( within reason of course). Best of luck and hope you sort it out. Cheers!
@@GPOutdoors Thank you so much your advice is much appreciated. I have been leaning towards the L however when I watch your videos I am amazed at what the 2601 does. We have 37 acres all pasture that the cows keep down. If I buy an L that means you should as well, no one is making videos like you are with your B with the L start a new channel. Did your neighbor purchase more than the L2501? It would be nice to get under the emissions if possible. I smiled when you said 2 hr drive to dealer we know what that is like.Thanks again Regards
LOl. Thanks very kindly Lee. Guy has an L3400 - about 15 years old. 37 Acres - that is wonderful. I am not sure if you have discussed with your dealer what his recommendations are but for sure I would buy an L. One of the reasons I bought the B was because of it's small footprint for driving through in the forest, but I also give up some stability because it is a very narrow tractor. The L will give you lots more weight and a wider, more stable footprint, bigger back tires for traction and more ground clearance. It will lift more as well - the B will not lift bales of hay or anything that big or that sticks out far from the loader pins. It does most all of what I need here on my 4 acres but if I had more, an L would be the pick for me. Just my thoughts on it Lee. Good luck and let me know how it eventually turns out. I am sure your dealer will have the experience to know what is best for your land and types of uses to help you decide. Cheers and thanks again Lee!
Excellent video. Good things to know about and to do, example, the brush guard, extra filters and oil. Always look forward to your videos. Is your jacket a regular Kubota one or only available from your dealer? The dealer patch is on it and was wondering.
Good day Gary! Thanks so very much - happy you enjoy them and watch! Yes, I got it from my dealer recently when I was in picking up a few things. Have a great week!
Watching your videos actually helped me decide on purchasing my B2601. Had the tractor for over a year now and absolutely love it! Always look forward to your video posts to see what tips and projects I can do. Keep 'em coming!
Good evening Mark! Happy you are enjoying it. I love this little tractor a lot. Great for my 4 acres here. Thanks for watching and for the kind comment. All the best!
Excellent video Gord . It was like going back in time when you mentioned all of the things that you've had done to the tractor . I've watched every single video . Many great tips for new tractor owners and guys thinking about getting one . That diesel conditioner really works . Got mine at Canadian Tire on sale . I had a check engine light on my truck and the dealer said it would cost me $1300 to fix the problem . My buddies mechanic put some of that stuff in the fuel tank . Filled the tank and went for along drive . Check engine light gone . That stuff worked . Cost , maybe $10 . Always buy your fuel at places that sell a lot of diesel. This way you're sure to get winter diesel . Small mom & pop stations still might have tanks filled with summer fuel . Yes , big difference in summer and winter fuel .
Hey thanks so much Henry! You've been with me for such a long time and I truly appreciate it. Thanks again and hope you have a wonderful week! Cheers!
FYI you can buy conditioner for low sulfer diesel engines, like the B series, made by the same manufacturer as shown in the video. Comes in an orange instead of green container. I bought mine at a local NAPA store in Canada.
Being a 2650 tractor owner you have helped me make excellent decisions on the use of the tractor
I really enjoy each video you put out. Not only are they informative but entertaining but everytime I watch I think of Guy your neighbor. Please tell him we are thinking of him and for him to get well soon.
Good morning and thanks very kindly Rick. he is getting better but it is a slow one for sure. He is up and about a little more now but not much. I will pass along your kind wishes Rick. Thanks again and have a great week!
A lot of great tips for any tractor owner! Thanks GP! I wish this video was a around when I bought my tractor! lol Hey! Thank you for your very kind words! You don't know how much I appreciate that!! Thanks again my friend!!
Thanks LA! Happy you enjoyed it. And you are most welcome! Cheers and all the best!
That's funny, I bought my Kubota brand steering wheel knob at the dealer the day I ordered my B3350HSDC. I love it. It was all I had for the month I waited for my tractor to be made. When I installed the knob I didn't realize that it didn't matter where it went on the wheel since the hydrostatic steering really has no center. Sometimes the knob is on top and other times it's on the bottom or to one of the sides with the front wheels straight. Thanks for the great content! Cheers!
LOL! That is funny. I had the same thing happen to me. Except I thought the steering was broken and called in for warranty service. They explained to me it wasn't broken and how it worked. A little embarrassing at the time but we go a good laugh from it. Thanks for watching and for the great comment this morning! Cheers!
Kubota offers the best insurance policy when you actually finance your tractor trough your dealership. Another tip, if you have a lot implements and you have animals like horses, etc., you be better with a farm type insurance then a residential one. My recommandations are based on Canada, Quebec and Onrario legislation. Great video, most of the mods you propose I did when I purchased my 2650 last year.
Thanks Eric - great point about the farm insurance , if you run a farm. However, respectfully, I have to disagree with you on the KTAC - I am not sure that the KTAC is the best, and it is too expensive for the limited coverage you receive, IMO. Duliban Insurance, here in Canada, is the only broker with standalone Compact tractor insurance (Called Tractor Protect- you can check it out on their website if interested), - the KTAC has no 3rd party liability , as I understand it - it only fixes the tractor. The Tractor Protect policy I sourced and now have in place from Duliban, gives me $2 million 3rd party liability and the insurance is in effect whether working on or off my property (my original rider on my homeowners policy only covered me while on my property and had no 3rd party liability). Hands down, I would offer that if I run my buddy over, cause personal injury to someone, or hit a car on the county road or cause damage to his property, the cost of fixing the tractor will be my least concerns. KTAC does not cover those things- it only covers the cost of fixing the tractor. I did a few videos on it - they are on the channel homepage listing, if you are interested - I spent a lot of time and research on the subject. Hope it helps a bit - wish you all the best! Thanks again!
Hi GP! I am enjoying my new tractor, the B2601. Because I religiously follow your channel I already knew about some of these mods The ones I like the best are the carry-all and the side step. I got my carry-all frame from Tractor Supply Company here in MN. I think it was about $140. I had no idea about the step until you told me about it. But, you are right, I couldn't put it on until the belly mower came off. But it is in place now! It is a great addition. I have a Dealer installed roof on my B 2601 which is attached to the ROPS. Because of the roof, which can't be all loose when it is attached, they installed a bolt in the same nut that you installed your bolt to keep everything tight. I will be very interested in hearing about how the tire chains work for you this winter, which is not far off! Great video, thanks!
Good afternoon Michael! Good stuff! I like your roof too. I'll bet that helps to keep you cool in the summer and dry in the winter. I'm looking forward to trying out the chains - stay tuned! LOL. Thanks again and happy to hear you are enjoying the new tractor. Cheers!
B2601 owner here your channel was a huge factor in buying decision March 2019 :) 48.6 hours on machine atm
I really like your tip on stocking extra set of filters :)
Hey that's great to hear B! And happy you are getting some good time in on it. All the best and thanks again for letting me know!
B 7800 here and love it
It my little monster
Hi GP
Great video as always
A simple mod I have done to both my tractors is to glue a magnet to the top of the fuel caps so that when I fill up with fuel the cap stays on the hood of the tractor and doesn’t fall off if I forget to put the cap back on, I have lost two caps because I got distracted and drove off without putting the cap back on, the magnets work well.
Michael 🇬🇧
Good morning Michael. That's a great idea! I have also almost forgot a couple of times to be honest. I usually lay it on the floor by the pedals and have hopped up the tractor to start it. Thanks for sharing! Cheers!
Very nice and informative. These accessories are good and make using the tractor easier.
Thanks for sharing and have a good week!
Adrien
Thanks Adrien! Cheers!
Nice overview of all the handy stuff for a tractor owner.. thanks GP
Cheers Eric!
I have a Quick Hitch on my B2620 rear, I never knew how to mount the top hook until I saw your video, now I need to redo my set up. Thanks! But I think my two rear attachments are not quick hitch compatible, I have to take the hook off and mount it with the opening facing towards the tractor, like a C not a U..
As for the bolt in the ROPS mine was a standard thread 3/8 x 18. I couldn't believe it was an SAE so I ran a M9 x 1.25 tap in it first but I couldn't find that bolt. The 3/8 x 18 works great. I used a Canadian company Bro-Tek for wheel spacers. I put 3" on the back and 1.5" on the front along with Rim Guard in the rear tires, it can handle 30 degree grades with no problem.
I don't have a tractor GP but those are very good mods or attachments for sure.....tractor owners I'm sure will appreciate them......have a great week coming up and take care my friend...... :)
Hey thanks Don! You too and all the best!
Great tips! Thanks for the advice.
I want a 2601 SO BADLY. Just can’t afford it now. Life will get so much easier when I finally get it. I’m working on it.
Good morning Van. Hang in there - I know it can be tough waiting it out but in time. Good luck and have a Merry Christmas!
Really enjoy your videos! I'm in the market for a tractor, my first, and have learned a lot from your videos. I plan on visiting dealers and putting boots on the ground, so to speak, before making the big purchase. Your videos have really helped think about what questions, applications I may have before making that visit. It's really refreshing watching you work through things, sometimes for your first time. it really relates to anyone who's going to be or is a first time tractor owner. It's much appreciated and I know is a lot of work! Thanks again and keep the videos coming! I think everyone would enjoy watching them, tractor owner or not.
Doug D
Murrayville, GA.
USA
Good morning and thanks very kindly Doug! I really appreciate the feedback and I am very happy that it is helpful to folks, especially folks new to tractors such as myself. That's pretty exciting to be looking for your first tractor! Good luck and all the best. I would enjoy hearing when you finally get your first tractor. Cheers!
@@GPOutdoors Thanks for getting back with me. I will absolutely keep in touch and let you know which tractor I purchase. Yours seems to really serve you well! I especially like your videos on using the attachment. On a side note I'm looking at log splitters also. Yours seems to really be a time saver with the dual stroke splitting! Of course we dont need as much wood in Georgia as our northern friends but still supplement our furnace with a wood fire whenever were home. Just how much wood do you go through in a season? What other heating sources do you utilize if I may ask. Just curious as our winters are pretty mild and it seems yours are quite cold!
Take care,
Doug Davis
Murrayville, Ga
Thanks for the step mod info! Dealer didn't know how to add a step to my 2601. I ordered the one you mention and it works great!
Gp got me a b2601-1 plus an LA 435 loader this month still new but so far I love it. Your videos are very helpful thanks.
Hey congratulations msgt! Happy for you - glad the videos are helpful and you are enjoying the new tractor. Have a great week and all the best to you!
Good day Sir, your video on the insurance for the tractors was an eye opener for myself, by getting the proper insurance coverage was very important, so I can go see Joe now !!! and save 1/4 of the cost of the insurance !!! Thanks again GP !!! Cheers !!!
LOL. Me too Dave. better coverage including off property and on road and only a little bit more than my current insurance which only offered on property. Enjoy the rest of the weekend! I still have to watch your latest video so will settle in with a warm drink and watch soon. Cheers!
@@GPOutdoors No Problem GP ! You are very busy man !! Family first !!! Please do take care of yourself and have a great week !!! Cheers !!!
I don’t have a tractor yet but I hope to purchase one in 2020. Between watching your videos and the research I have done it will definitely be a B series and most likely will be a B2601. These are great ideas that you have shared only a couple of which I have already planned on doing. Thank you so much for all the time and effort you put into providing us with your videos. Take care and keep on “tractoring”. God bless.
Good morning and thanks John! It's great to hear you have been researching for a while before you make your purchase. It's a big decision and so many brands and models to choose from. I am happy the videos have helped a little. All the best and good luck! Cheers!
Also, I'm so sorry to hear about your daughter...my heart breaks for you and your family
Good morning and thanks very kindly. I appreciate it very much. Stay dry !
As Jeremy said, you are closer to a pro than a beginner. I must say that a nice thing about your channel is that you remember well what you had to learn. Then you also have a very good way of teaching it to "real" new tractor owners. Thanks GP!
Thanks Joe! So very kind and I appreciate all your support and help over the last 2 years. Have a wonderful week and hope to catch up with you again soon. Cheers!
🤣🤣
This video is great. Newbie or long time viewer, Taking the time to review really helped me to think about what I still need to do for my tractor. Thanks.
Good morning Erick! Thanks - happy it was helpful. Enjoy the rest of the week! Cheers!
Hi GP great video. I have added both implements and mods based on your videos. Keep them coming. We're practically neighbours - I live about an hour south of Ottawa. Think I have the same grapple as you! I found an attachment from Work Saver that goes on the loader and allows me to attach the carry-all on the front of the tractor. Biggest benefit is I now have a portable work bench that I can raise as high as I need. Great for working outside on things like push mowers and my portable generator.
Good day L4060. That's a great idea - portable work bench! Nice. Yes I think I would only be about 2 1/2 hours from you. I used to go up regularly when my daughter attended Carlton. Thanks for saying hello this morning and all the best!
I purchased a steering wheel knob for my 2301 earlier this year after watching your videos GP, I love it! Couldn't believe I had been operating tractors for over 20 years without one.
LOL. So funny Fred! I had so many subscribers suggesting I get one for a long time and I didn't think it was of much value till I saw it on sale at the store and figured I would try it. Same as you, I cannot believe I didn't put it on right away. Thanks and enjoy the rest of the week!
Good use of drone footage. Also the pace of your voice or commentary makes listening to your video easy and understandable. Kevin. Lansing MI
Thanks very much for the great feedback Kevin. Have a Happy Holidays!
Thanks for sharing your info on your tractor👍
You're welcome Lloyd! Cheers!
While I own a little JD 1025R, almost all the tips and mods you mentioned are applicable.
Good stuff Terry! Hope there was one or two that might work for you. Cheers and all the best!
We don't have that rattling problem with the rops on JD's do we.
Thanks GP like the video and tips and im an oner of Kubota too since I was about 20's years old now 72 years old .
Wow! Leo! I knew you were wise and now I know you are 72 years wise. LOl. Great to hear. I'm really happy with this little tractor. Have a great week!
My two or maybe call it three best mods to my 2601 are, Milsco V5400 air ride suspension seat, and added rear remotes with hydraulic top and side link. These mods are a real game changer for your overall comfort, and makes so many of the rear attachments so much better/easier to use.
Hey thanks! Some great adds there. Especially like the idea of an air ride seat. It gets pretty bumpy on the lower back in the forest. Thanks again for sharing and all the best!
GP, My new B2650 hasn't arrived yet and so I'm stuck watching RUclips videos and salivating over which mods I want to get for it. One of the mods I've been thinking about is guards for all of the filters; after your comment about rocks in the forrest, I've decided to get the ones that Paul Short makes over at Specialty Repairs Custom Mods..... Ground clearance has never been a problem with my M9540. I've always kept the extra fluids and filter on hand in the shop, but I never thought about needing to changing them because they were accidentally damaged.
Thanks for sharing your experience.
Good day Tracey! It's tough waiting for the tractor delivery, isn't it? Kind of like waiting fro Christmas when you are little. Hope it gets there soon. Great practice to keep the extra fluids and filters around, I think. Good luck and let me know how it goes! Cheers!
All great information in one video. Thanks!
Cheers Edward!
18 dollars Canadian...that's like 2 dollars American lol
Love watching and rewatching the old ones too
Cheers from Niagara Falls Brother
LOL!
Have a b 2650 and those wheel spacers are the way to go. Cheers.
Great advice for any new compact tractor owner. One mod I noticed you haven't done yet is to frame in with metal your turn signals. I haven't either and already busted two clearing out trees with my backhoe.
Good day K&C! Thanks for the great idea. I did think through it last year, and perhaps I can get Guy to help me make a frame, if I decide at some point to do it. I did find one place here in Canada but it was cost prohibitive. I could replace the lenses 5 times for the cost of the frame and since I have made it 2 years working in the forest without breaking one, I figured the risk was worth it. But then again, I don't do BH work with it so it might be a good idea for you folks to consider, given the work you are doing with it. Thanks again and all the best!
Hello GP! Took delivery of my new L3301 with loader last Wednesday. My dealer filled the rear tires with fluid as standard prep (so no worries about extra ballast) and 3rd function valve for a grapple from Everything Attachments here in North Carolina. Your vids were instrumental in my buying decision. Always look forward to your practical tips.
Cheers from Linden, NC USA!
That's great! Congratulations! You must be really happy. Enjoy your new tractor and all the best! Let me know how it is going from time to time. Cheers!
We don't have a "B" series tractor, we have the "L" series, but some great tips anyway. I had already put the metal on the front guard, need to add extra lights. Thank for sharing.
Good stuff jeff! Cheers and all the best!
Good information. Another great video
Thanks Greg! Cheers!
Show Off ...... Your driving me crazy , I got get a grapple. Well done. Have a great Day.
I send my customers to Duliban insurance all the time. They are very easy to deal with and can provide customer coverage for your application. Shoutout the them.
Thanks for sharing RG! Cheers!
How's it going GP that was some good advise especially the insurance... I updated my homeowner policy and it was cheaper to include the tractor rather then have a separate policy.. Also learned what my limitations were... God Bless...Chief..{NYS/ADK}
Going very well Chief! Family is good and that means I am good. LOL. So nice to hear from you. Great to hear you reviewed your policy and all is good. Have a wonderful week my friend! Cheers!
i bought a L3901 in part because of you vids
Good morning and congratulation on the tractor, Ram! Happy if the videos helped and very happy you got the right tractor you need. Many folks have said the 3901 is a great machine - hope you get lots of use from it. All the best!
Hey I just stumbled upon your channel.....I had a 2012 BX2660 and recently up graded to a '16 B3350..I have done a few mods you mentioned and my ROPS had those bolts installed on both sides to stop the rattling and it is OEM. I will check out more of your videos and Im in Central IL USA so we get winters like you do but probably not as frequent or violent lol !
Good morning Metfan! Welcome to the channel! Funny they don't come with the 2601. But hope you enjoy your tractor. I imagine you are getting ready for the snow too! Cheers and thanks for watching and for the comment this morning! Cheers!
Another great video GP . . . I like the grill safety screen, but I had to remove my grill to install my 3rd function valve. It came with a universal bulkhead mount that did not clear the grill on the B2650 with cab. Keep up the great work Sir . . .
Thanks Daniel! All the best!
I have a Kioti that has mirrors and let me tell you, it really saves my back. You have great visibility to the rear. Love your videos. CHEERS😁
Good morning and thanks Scott! A couple of folks have suggested mirrors. I may look into them - my back does not like twisting around too much anymore either. LOL. All the best!
Super helpful summary!
This is good stuff Gord, thanks for sharing.
You're most welcome! Have a great week!
We are going out Wednesday to look at B series tractors. Well ok really to get oil and filters, but hey, while we are there no harm in looking. great video GP.
LOL TPG. No harm at all. Surely you can't just walk in and not spend some time checking out the new line ups and changes. Cheers and thanks!
Not knowing all of the accessories available for a Kabota B series, I wish I would have gotten a rear weight rack instead of the land pride ballast box. Funny how hindsight is always 20/20.
Okay okay “Kubota”
@@tomz9241 LOL!
Excellent informative video. Thanks for all the tips. Hope all is well and hope Guy is doing better. Many blessings to you and yours. Be safe..wont be long till the white stuff is falling on the ground...lol
Thanks very much Lewis! He's getting better and I am sure will see your comment. And yes, it's coming. LOL. Cheers!
Hi GP, I just inherited a 10 year old Kubota B3200 with a LA504 loader and belly mower. My dad passed recently so I been sorting it all out. But it's a nice tractor.
Hey MNP. I am sincerely sorry to hear about your pops. This has to be a very tough time for you and for your family. For what it is worth, from me to you, remember all the good things, and as my gramma used to say to me, be thankful for all the time and experiences you had together, not the future. Life is a gift and perhaps focus on all the wonderful time you had while he was here. I will keep you in my thoughts and hang in there as best you can. Cheers and all the best MNP.
@@GPOutdoors Thanks for the kind words GP and glad to see you and Guy doing well. Yep it's what I focus on. Well now I have a B3200 with 200 hours of grass mowing. So' I'm gonna turn it into a tree tractor with grapple/3rd function and a PTO driven wood chipper and a sawhaul. Was thinking of just trading it for a L3901, but this tractor runs pretty good and no Tier 4.
Hey GP, another informative video. I'm going to look into quick hitch capability for my BX 23S, I just purchased the basic package that did not include quick attach for my FEL and since I have the back hoe that is part of the frame I have to remove it to use my brush hog. Since my memory fails me too often it's a new learning experience every time I do it. lol. once again great info.Thanks for sharing Cheers
Good morning Roy! LOL. Me too, honest. I have to write everything down or I forget. Great that you have the BH. I am sure it comes in pretty handy for you. Thanks again and have a wonderful day!
im lucky to have a Kubota dealer 4 miles down the road
Good morning jack. That is lucky! Wish mine was closer. Cheers!
Very informative. I have four Kubotas up to 85HP and am strongly considering a B2601 this winter or spring. Additions I always add are chain hooks for the loader bucket, usually weld on but Kens Bolt Hooks are an option if you don't weld; at least one rear remote for hydraulic top-link, I usually get two for TnT; step from Specialty Repair there in Canada. I live in the hills and add wheel weights. On some, I add hazard and tail light protectors and I just bought an adapter for the rear differential lock. Check Paul Short at Specialty repairs, he has some really nice additions for sever Kubota models including the B01.
Thanks R2! Some great adds you have there. I need to get some hooks for the bucket for sure. Thanks!
GP thanks for the great tips.
Great video. I added 3" wheel spacers and it increased the stability of the tractor dramatically. Another mod I did was a tool box carrier. I would send a photo if you provided an email as can't attach to this comment.
Good stuff Sydnick! I am happy it has helped. I am happy to have the extra width myself. Cheers!
Another great video. I really enjoy them. I've bought 3 zero turns from Larkin over the years and a ton of parts.
Thanks so much Evan! They are great folks to deal with from day one. Quick parts delivery every single time and always willing to answer all my questions. Thanks again and have a great week!
new owner of a B2601 and new to the quick attach bucket, pallet lift and snow blade. My first experience with the moving of these implements is when the driver dropped all off in my driveway!!! Took me 2 hours to attach, un-attach and move all around to where I wanted them stored and re-attach the bucket to the tractor - I know there must be a very easy method to attaching and un-attaching that I missed seeing as the dealer demoed it to me. Do you have a video of this that I could watch
I need to do that expanded metal grill guard mod sometime. I spend quite a bit of time in the woods with my B2650 so it’s just a matter of time before I get a stick or branch up through there. Nice vid as always, GP. Have a good week!
Cheers Fred!
Very informative! I have subscribed will be back after I get my 2601!
Thanks! Welcome to the community!
Rainy days were some of my favorite days as a kid. Those were days we spent repairing equipment by opening the double doors on the blacksmith shop and back in whatever piece of equipment needed repair.
A nice list of suggestions GP, for just about any tractor owner. A very good video sir, but we are all missing Guy and his suggestions too !! Non sequitur question: Are your solar panels connected to a battery storage system? You have the right to refrain from answering....LOL.
LOL. Good morning T! Yes, missing Guy as well. Yes, it is a full off-grid system. No utility connection here. The utility power goes out so often up here I am not sure it would be of any help. I did a video (#8) on the system way back, if you are interested. Keep smiling!
@@GPOutdoors Great !! I'll go back and have a looksee. I think it was around your 110-120 mark (??) I subscribed and though I did go backwards and bounce around sporadically I have not seen them all. My bad )-: Thanks for the tip the vid's location. I'm now recalling possibly a comment during the generator servicing videos about the lack of utility supplied power. Boy it sure is hell getting old. (-:
Gord, another excellent video! I'm sure other subscribers, like me, would like to know a little more about you. You are a very interesting guy. Not prying into your personal life, of course, but just a little bio of your background, how you came by your "cabin" etc. would be interesting.
Thanks so much Paul ! An interesting idea - I'll give it some thought although I am not sure it would be a very interesting video for folks. LOL. I do appreciate your kindness though. I appreciate the interest. I will perhaps try to include it into a future video. Thanks again Paul and all the best!
Tractor Supply Company makes a good cheap carry all frame. Up in the Us. I’m an MX5200 owner and I’ve picked up a few good tips from you. Thanks
Good morning and thanks Kevin. LOL. I paused because I couldn't;t remember the name . LOL. That was it. Thanks for sharing and glad the video was a little helpful. Have a great week!
Another very informative video GP, you have come a long way in a short time. Are you a teacher by trade because you are great at explaining and teaching things. Very helpful tips for all tractor owners. Can't get enough of those overhead shots of your property. I think another project you may consider worth doing is to add mirrors to your tractor.
Good morning and thanks very much Mark! LOL. No , not at all but appreciate your kind comments. Mirrors are a great idea! Will help a lot and save me having to twist around in the seat - the old lower back doesn't like doing that anymore. LOL. Cheers and thanks for the idea!
Now this go around You get to give us some great tips! You as well helped me out by making me think of a few things that hadn't crossed my mind. Great Video GP! 👍☺
Hey good afternoon BB! Well, I am happy there were a couple of things in there you might enjoy. You've helped me out a bunch! Have a great week out there!
Way to go GP thinking outside the box by having extra parts by saving time and money by having the parts on hand
Cheers Richard!
Fantastic Gordy! This video sums up why I watch your channel (and will continue). How about some love for us bx owners?
Great job and give my best to Guy! Cheers
LOL. Thanks so much Tom! I am happy you enjoy and I certainly enjoy talking with you. I wish I knew more about the BX but perhaps soon. My older brother just bought one for his property. Looking forward to seeing it soon. Cheers and all the best!
How's she goin'? Great video GP and great to mention how all these little 'improvements' make the tractor experience even better!!! Take care!!
Thanks Grampie! All the best to you and Nannie!
Good one great 👍 advise 👍
Thanks DJ!
Great collection of mods. and accessories. You have mentioned some of these over time but it is good to get them in one video. You have shared maintenance tips from time to time. Maybe you could collect them together too. How is Guy doing? Take care all.
Thanks David. A good idea for a future video. Thanks so much for asking. He's getting better and getting out a little here and there now. Long recovery unfortunately. I'm sure he will see your comment and appreciates it very much. Cheers and have a great week!
I have. B2301. I love my little B2301. You should consider AMSOIL products to provide superior protect. We should talk...
Busy Bee Tools has different knobs. Do a search on their website for knobs, it should show what they have. I bought a couple adjustable knobs for a chainsaw holder I made.
Nice! Thanks for the tip Laurie! Cheers!
Great Video!
Thanks Tom!
I am a new Tractor owner and this is my first time to watch your show. I really enjoyed it and very informative.
Have you heard of anyone putting cameras somewhere on or near the loader so you can see the front edge position of the bucket? Or how about on the back of the tractor so you don’t have to constantly twist around to see the back?
Hey good evening Nelson and thanks for tuning in. Congrats on the new tractor! Yes - Roger on the RUclips channel 'Tractor Tech' did a video on putting a camera facing front and facing back. (not on the bucket, but on the front of the cab to see the front (you can find it on his channel). However, I am pretty sure you may find that you will still look backwards, but perhaps not as much. I don't know from experience but just my feeling is that the camera sees things closer or more distanced. Good luck and wish you all the best!
i own a b5001, not the same i see in the video but hey! is older than ma and it works fine!😉
Great video!!!!
Thanks Pohbor! Cheers!
G P great if not reminded you well do most of the things you experienced
God Bless
PaK
Thanks so much Peter! Be well and have a wonderful week!
Great tips, Thanks!
Thanks David! Cheers!
Gord, thanks for another great video. It would be super helpful if you added all of the part/model numbers into your comments as well as the videos. I dont mind rewatching your videos but that would expedite ordering parts when I'm/others are ready.
Thanks Don! That's a great idea. I will try to find some time soon to update the description. Cheers and thanks again!
Winter is coming, I may not be alone with this, please do a video when you hook up your snowblower. Also it would be great to learn about your hydraulic chute deflector and rotator. Awesome video, always learning from you
Hey thanks ATR! Check out video #105 and video #15. I think these might do the trick. Cheers!
GP Outdoors thank you GP!
Good video. Maybe a video in the future to list your subscribers mods taken out of comments. Also invite input on
mods that have not been mentioned in the comments. Thanks and have a good one 👍
Thanks H! A good idea to consider in the future. Cheers!
I have a B3200 with 950 hrs. It is my fifth Kubota. 1600, 75??, B2400, B2710, and B3200.
i've always used the glow plugs for starts even in moderate weather, it just starts easier.
I remember someone explaining alot of gray smoke on startup and nothing after that.
Whatya know about that boys and girls?
Great Tips!!!
Thanks!
Great video; where did the chains come from. Saw pn for spacer.
best winter mod I have made is to buy skid shoes for the loader. I use these until the gravel in driveway is frozen. Bucket won't tear up drive or sod
Good morning Doug. That's a great idea! Thanks for sharing it with us. Cheers!
Heyhey Gord my B2601 came with a knob on the ROPS to prevent rattling. Maybe my dealer just does it on their tractors. I did not know that it was not the standard. Good tips. Thanks
Good stuff! Certainly helps. Cheers AK!
Thank you
Excellent video, curious how the solar panels hold up in winter with all that snowfall you get.. obviously buried but structurally. Assuming that's a viceroy home. Do you think you would ever trade your tractor in for a cab b2650.. for warmth
Good evening CM! Some good q's. Structurally - not a problem but if I want to save on running the back up generator , I often need to use a roof rake to remove the snow off them. Remarkable things I can tell you. Even on the most overcast days, they still generate power - not as much of course but somehow they still generate. It is not a Viceroy home actually - I did include Viceroy in my research and analysis but I purchased from Linwood. One day depending on ho things go, I would really love to trade in for a cab. I think with experience, I will be sharp enough to get through the forest without shattering any glass and would really enjoy having heat in the winter and also keeping the flies away through the early summer. But I think that will be a long way off. I do have to say that I am happy that i didn't get a cab model while I am still learning in the forest. I am pretty sure I would have busted a panel or two by now. LOL. Hope you are doing well. I did look into those shirts you suggested - thanks! Be well CM!
@@GPOutdoors I think Viceroy went out of business a couple of years ago.
Thank you for the video. Have you ever had to replace your glow plugs before? If so will you send me a link for how to replace them? I have a 2015 kubota L3301 4x4 and I have no idea where they are located.
Whoops! Hi GP, I posted an earlier question regarding the mounting step interfering with a belly mower (please disregard as you answered that here).
LOL. No worries! Have a great week!
Excellent tips that I very much appreciate!! I'm taking delivery of my new B2301 next week, and will have all Winter to get some of these improvements completed! One question that I have...does the grill guard reduce the effectiveness of the headlights of the tractor much? Thank you so much for the outstanding videos and "no-nonsense' information!
Good morning Thomas! It's a big day today! Congratulations! I'll bet you didn't sleep a wink last night. LOL. Honestly, the headlights are very ineffective and not much help at night. The bucket blocks them so you get very little sparse light in front of you. Try it tonight after dark. That's why everyone puts work lights up on the ROPs. If you don't ind me mentioning, I tried couple different lights - the lights I have as I noted are 1160 Lumens, and it gives great light front and back - and it illuminates fr down the road. They are great way better then the last one I put in first. If you are going to put lights in, make sure they are at least 1100 Lumens for sure. The lights I have have 5 bulbs in them. the two outside bulbs are flood light style so it lights up the sides of the forest in front of me and the three in the middle of the light are direct lights that shoot forward. Great lights and a great price. They have lasted almost 2 full years, through two winters and still working great. Good luck and all the best today. Enjoy your new tractor Thomas! Cheers!
Thank you so much@@GPOutdoors! Your reply makes a lot of sense. I have heard other tractor owners complaining about the headlights bouncing off the back of the FEL and being ineffective before. My current tractor (1991 John Deere 430) had the grill take a beating over the years due to not having a brush guard at all, and I don't want my new B2301 to suffer the same fate! I will surely add the additional lights, and have your videos #9 and #12 bookmarked for reference! The tractor will be delivered 11/4, so I have a few sleepless nights to suffer between now and then, LOL! Thanks for the thoughtful reply, I appreciate your time!
@
GP Outdoors Great info in your video. What chains are those on your R4 tires? Size/Model#?
Thanks Clif. Not sure the size but I bought them from canadianchain dot com. I just had to click on the tire size (the number you find on the side of the tires) and they send the correct length/size of chains. Simple ordering. They had several different types of chains. These ones are called H pattern V-hook, chains. Very aggressive. Hope that helps a bit. Cheers!
@@GPOutdoors Thanks
If you tell folks you put a knob on your ROPS they will think you a bit kinky. I just used a metric bolt and nut on mine. Put a nut on yours to lock it in place. If it comes loose it could fall off without you knowing it.
LOL Ron! Great yes about the nut. I will for sure as I noticed I have to tighten it every couple of days. Be well and take care!
Good afternoon GP . Good video full of great information for folks! Have you tried going over your trails with the tractor and snow blower yet? It’s good that you are all tuned up for winter. You mentioned about you and Guy possibly getting logs hauled in to cut and split? Sure would hate to see you folks getting cold this winter? Hope everyone and everything is okay up there. Thanks for sharing with us.
Hey good day ODD! No snow up here except a few flurries so have not had a chance to changeover to the blower yet - but hey, I did do all the maintenance and prep on it so I am ready. Been working on the wood now for a bit - a few videos are coming out in the next week. All good here and hope all is great with you too. Thanks and talk again soon ODD!
I was wondering if you would be able to use the snow blower on your trails, if it fits your trails? 🤔
I don't think so ODD. Would be nice to clear them for winter walks but too much debris and things that could get caught in the blower I think. Take care!
I have the same FE snowblower and successfully cleared my hilly trails last winter. Just be sure to raise the skid plate to the max. I too have chains and spacers for my ballast filled wheels. On slopes it helps to drop your box blade to create some drag as you go downhill.
Hey thanks Paul. I didn't think I would be able to take it into the forest trails but maybe I will try it out. Thanks again. Cheers!
Thanks GP still have not decided what tractor L or B has been a very difficult for me into my 4th month of indecision. I have watched many of your videos. Regards
Good evening Lee. It's a tough decision especially if it is your first tractor. I am happy the videos have helped a little. A few things, if you don't mind me offering. I spent months on it too. I have learned that if you have more than 5 or 6 acres, you most likely need to consider the L. Hard to explain but I am fortunate that my neighbour has the L and if I had more than this 4 acres, I would have purchased an L for sure. Heavier, more capacity and larger, higher ground clearance, among things. You don't want to buy something and find out it is under powered for all your needs. I know that probably didn't help much ( LOL) but if you have a larger property than mine, and it is affordable for you, try to buy the most tractor you can afford, ( within reason of course). Best of luck and hope you sort it out. Cheers!
@@GPOutdoors Thank you so much your advice is much appreciated. I have been leaning towards the L however when I watch your videos I am amazed at what the 2601 does. We have 37 acres all pasture that the cows keep down. If I buy an L that means you should as well, no one is making videos like you are with your B with the L start a new channel. Did your neighbor purchase more than the L2501? It would be nice to get under the emissions if possible. I smiled when you said 2 hr drive to dealer we know what that is like.Thanks again Regards
LOl. Thanks very kindly Lee. Guy has an L3400 - about 15 years old. 37 Acres - that is wonderful. I am not sure if you have discussed with your dealer what his recommendations are but for sure I would buy an L. One of the reasons I bought the B was because of it's small footprint for driving through in the forest, but I also give up some stability because it is a very narrow tractor. The L will give you lots more weight and a wider, more stable footprint, bigger back tires for traction and more ground clearance. It will lift more as well - the B will not lift bales of hay or anything that big or that sticks out far from the loader pins. It does most all of what I need here on my 4 acres but if I had more, an L would be the pick for me. Just my thoughts on it Lee. Good luck and let me know how it eventually turns out. I am sure your dealer will have the experience to know what is best for your land and types of uses to help you decide. Cheers and thanks again Lee!
@@GPOutdoors Hi GP what you say makes so much sense. I will let you know. Thanks again. Regards
Excellent video. Good things to know about and to do, example, the brush guard, extra filters and oil. Always look forward to your videos. Is your jacket a regular Kubota one or only available from your dealer? The dealer patch is on it and was wondering.
Good day Gary! Thanks so very much - happy you enjoy them and watch! Yes, I got it from my dealer recently when I was in picking up a few things. Have a great week!
Great Channel! You didn't happen to film the light install did you?
Good morning and thanks FW! Yes, I did - it was video #9 on the channel. Thanks for tuning in and all the best!