The $350 Printing Giant!!! Elegoo Neptune 4 Plus!
HTML-код
- Опубликовано: 25 июл 2024
- After almost a month with my Neptune 4 Plus, I can happy say that I made a great purchase! This Machine has been nothing but a huge upgrade when it comes to my old ender 3 pro.
3D Benchy
www.3dbenchy.com/
Flexi Rex
www.printables.com/model/4624...
Honeycomb Wall
www.printables.com/model/1525...
Collapsing Lightsaber
www.printables.com/model/3720...
Dummy 13
www.printables.com/model/6222...
Lego Man
www.thingiverse.com/thing:293...
Eiffel Tower
www.printables.com/model/572-...
Rog Ally Stand
www.printables.com/model/5249...
Elegoo Neptune 4 Plus
amzn.to/43QusCo
My Orca Slicer Profile
drive.google.com/file/d/1LO3d...
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/mood-maze/trends...
License code: NFANWDNKADRQSEFY
#3dprinting #elegoo #tech #3dprint #3dprinter #youtube 
Наука
Great follow up video! :) Mine hasn’t had the blob of death yet either, and i’ve used it daily for an entire month now. I really enjoyed making the Celtic Cube from thingiverse, so maybe give that a try. I have 8 colors already too now. Addicted
I’m using Orca Slicer, and it’s been great! Took some settings from over 3 videos and fine tuned it. Learned to glue the plate every time, after a piece broke free at 90%, and also bought some Gloop for bonding pieces together too.
I found I got the best bonding to the plate after I wash my bed sheet in hot water and dawn dish soap.
Sweet
Hey pal nice video. You explained the faults and possible reasons. No BS, no fluff and I bought the same printer roughly 2 months ago and software was updated as well. My only issue is I nicked the ribbon cable. They sent a replacement and I fixed it. Elegoo has be responsive and helpful.
I did accidentally delete the Webcam.txt file and didn't know it so I did lose the ability to put the Webcam on it like I had plugged into the usb and went through RUclips videos on how to enable with putty and ssh talk into the printer. I am first time printer guy but am pretty techie and even after redoing all the firmware can't get it to recognize a Webcam.
So... Be careful in fluid with the folders and files.
I haven't printed anything but PLA but want to print with some stronger items made for an enclosure if you had any suggestions I'd appreciate comments.
I've had very good luck with all speeds and updated to elegoo version of cura 5.6 from their site.
Keep experimenting and post failures as well because I get tired of seeing the professional time lapped vids that always are perfect.
Go Elegoo!
Thank you for the kind words! This isn’t my first run with Klipper so I’m aware of how sensitivity the files can be.
I only really print PLA as well so I’m not much help on that end but i know there are a bunch of options for enclosures, whether you build your own or buy one.
I’m always experimenting with my printer, check out the linear rail videos, that’s an upgrade I do recommend on any printer.
Nhựa ABS có vẻ bền
On the grey benchy, try using high-speed/rapid pla.
Doing an experiment on that stuff actually
I do not know how good filaments printers elegoo do... but their aftersale support is great
I have had no issues with my Neptune 4 plus! And I’m only doing all the upgrades cause I’m a tinkerer and it’s in my blood 😆
I have some problems. I dont know what exaclty it is but all my cura support prints failed. I want to print helmets but everything big fails some times after the first layer. Im a noob and idk
ps: benshi and Buddah seem fine
What support type are you using? I recommend tree/organic supports. Also how is it failing?
Drill a hole in the centre of the stuck bit, put a screw in it and pull it out.
Good idea!
Nah railed out soon is wild!
😂😂
My neptune plus got send back. It dragged on the part, with gcodes that came with the printer. it could not connect to wifi adn teh z-sensor died on day 2
Damn that sucks. Sorry you got a lemon. As you can see, this machine is capable of making great prints
@@EdsTechTalk94 thank you. I now have an ender 3 s1 plus. It works great. But it is soooo slow. I'd wish my Neptune worked out
Amazon offers a 30 day return 😅 maybe give it another try. I know speed and size was the big reason for my upgrade
@@EdsTechTalk94 i already bought a new printer 😂 but thanks
was that a cg5 refrence
Sadly no, as I don’t even know who that is 😅
I was so enthusiastic to buy this printer model. After a month of use all hell begun... After a blob of death everything went pear shaped. I've got the replacement print head no doubt, but the next one couple of days later... I was so angry, I've just throw it to the bin... No replacement from this company. Since the installation and re-levelling of the latest pre-assembled extruder kit I was not able to print a single usable piece. As the latest repeated fails, I've checked the bed temp and found that: it is all over the place and some parts even 10C degree lower than the set level. I wasted countless hours and countless filament reels with this junk of a printer. Not happy at all! Wouldn't ever buy another elegoo in any shape or form.
Sorry you had a bad experience with it. But mine is still running strong. Don’t get me wrong, it has had a lot less run time compared to when I first got it but it’s still running strong.
I agree. Go Bambu!