@@nikolas-ky1467 To be honest and objective, not much. Probably fixed some errors and glitches, but I don't notice it. What is felt is the speed of work. It got a little faster. Not super noticeable, but a little faster.
Thanks! The firmware update worked for my Peugeot 308 allure (hatchback) 2013. The firmware was never updated before. By pressing the settings button for 10 seconds it showed version 2013. After the update its now om the 2017 version 🎉 I've experienced a problem before it worked for me. First try the display kept rebooting after 20 minuten. After a few times i removed the usb (DID NOT STOP THE ENGINE) and after replacing the USB and rebooting the screen by holding the Media button for 10 seconds it worked, 25 minutes later it was Done 👍 (a bit lucky maybe, guess the usb was the problem). I used a 8 Gigabyte USB. I did not get a update succesfull message or anything. I had a Media failed error message or something like it. But after restarting the car the update was succesful because when i pressed the settings button for 10 seconds it is on the 2017 version 👍 After the firmware update i was also able to do the navigation maps update and also the camera speed update! So thanks again for the very detailed video 👏👏👏
Hi, I wanted to ask you something. I have a Citroen Grand C4 Picasso II from 2014. When I tried to use the navigator, the screen would go black and not display anything. Also, when I tried to lower the screen brightness, an information box would appear saying that the brightness was at maximum and I couldn't reduce it. I decided to update the firmware on my Picasso, as I have version SMEG5.0.D.R2. I searched on a forum and found the SMEG+ 5.43.A.R2 update, which is the latest update available for my model. I downloaded the update, formatted the USB to FAT32, unzipped the files with WinRAR and copied them to a 32GB USB. I started the car and when I inserted the USB, it asked me if I wanted to update the software, to which I replied yes. The update started, but after rebooting, the system started the process again and entered a loop that lasted about 4 hours. I finally unplugged the USB during one of the reboots, but now the system is stuck on the Citroen logo. I don't know what to do, could you help me?
I have a Peugeot 308 T9,2013. smeg4.1.B.R8 version CD: 20329 06/14/2013. Software 21.31. What version could I upload to this radio? Do I gain something new after uploading??? Am I missing anything?? Please help..
Hi, I have replaced smeg on peugeot 307 with same part number, but can not change vin code and it disabled functions like musics, res sensors etc When i try to write new vin it gives programing failed, any idea?
I found this version on Russian websites. At first it was scary to download something incomprehensible.....but it was this version that a lot of people put on and everything is ok. And you have exactly the same version as me. 2017, don't you have a NAC? Or do you have before re-rating?
@@peugeoton4033 you meant the navigation with 6 buttons? Re-designed ones have 6 buttons on navigation? I have 7 buttons like you. I put it on my navigation now I am worried that it might damage my car maybe? Can you explain please? I thought u got it from peugeot forums or peugeot website.
@@Ivan555523 It is better to download the file itself from where you think it is more reliable. The file that I have (link) is good and working. The most important thing is that the firmware version on your machine is smeg5
Thank you! I did it. It was easy. But unfortunately this do not fix my problem. Over a month ago my 308 started to play from 1st song in the 1st folder of the usb stick every time I turn on the engine. Every other audio settings are memorize. When I start the engine 20-60 seconds after turning it off it starts playing where it was, right like it shuld do. So far I try to format the USB stick, try with another USB, unplug the battery for a minutes or something like that, and I was very confident that the problem will go away after flashing the firmware. But no. Still anoing 😀 If you have something in mind for my problem please share it. I am out of ideas.
To be honest, I have not encountered such a thing. I would try to change the settings (next track, random order, and so on). Maybe it will give something...
@@peugeoton4033 I already played with the settings. Nothing helps 😕. I will try to update the maps this weekend. A guy in the 308 Facebook group advised me to do that. I will give feedback.
Same problem guys! Did you find a solution? Please post. I am afraid that this might be a rare firmware error on peugeot. One question? Do you still use thr factory battery? I do. I was thinking maybe its that. Dont know shit about cars but i am desprate 😁
@Peugeot ON hi bro, I just use your files to update my car, but it seem like this is the update from 2017 version, is that possible for you to get me the latest update?😅
I think this is the latest update for this version of auto (SMEG). Later cars came with NAC firmware. Therefore, it seems to me that it is impossible to find the latest version of the update directly (I think they are no longer being made)
my SMEG has no hardware touch buttons on the side but system version similar - SMEG5.41.B.R4, CD:26413, Date:05-04.16. can I use your update file for Peugeot 508 2016?
@@peugeoton4033 I've took a risk and everuthing works! Now I'm wondering if there are something newer than version from 2017.Or after NAC's release they stopped supporting SMEG?
Wow! These guys from the east can fix everything by their own hands! I tried and it worked for me! Why didn't find this earlier! Thanks!
Thank you, I will continue to make interesting videos
What is new with this update ?
@@nikolas-ky1467 To be honest and objective, not much. Probably fixed some errors and glitches, but I don't notice it. What is felt is the speed of work. It got a little faster. Not super noticeable, but a little faster.
Thanks! The firmware update worked for my Peugeot 308 allure (hatchback) 2013. The firmware was never updated before. By pressing the settings button for 10 seconds it showed version 2013. After the update its now om the 2017 version 🎉
I've experienced a problem before it worked for me. First try the display kept rebooting after 20 minuten. After a few times i removed the usb (DID NOT STOP THE ENGINE) and after replacing the USB and rebooting the screen by holding the Media button for 10 seconds it worked, 25 minutes later it was Done 👍 (a bit lucky maybe, guess the usb was the problem).
I used a 8 Gigabyte USB.
I did not get a update succesfull message or anything. I had a Media failed error message or something like it. But after restarting the car the update was succesful because when i pressed the settings button for 10 seconds it is on the 2017 version 👍
After the firmware update i was also able to do the navigation maps update and also the camera speed update!
So thanks again for the very detailed video 👏👏👏
I'm glad I could help you.
I did as shown and it updated correctly, I used the version that was used in the video and it's working 100%. Thanks!
Hi Thanks for trying to help me but when I plugged the flash drive in I received a message "Failed no music files found" Paul.A..
yeah me to
Hi, when i put pendrive into usb it shows "No music files", so it reads this pendrive as music file.. how to fix it?
Hi, I wanted to ask you something. I have a Citroen Grand C4 Picasso II from 2014. When I tried to use the navigator, the screen would go black and not display anything. Also, when I tried to lower the screen brightness, an information box would appear saying that the brightness was at maximum and I couldn't reduce it.
I decided to update the firmware on my Picasso, as I have version SMEG5.0.D.R2. I searched on a forum and found the SMEG+ 5.43.A.R2 update, which is the latest update available for my model. I downloaded the update, formatted the USB to FAT32, unzipped the files with WinRAR and copied them to a 32GB USB.
I started the car and when I inserted the USB, it asked me if I wanted to update the software, to which I replied yes. The update started, but after rebooting, the system started the process again and entered a loop that lasted about 4 hours. I finally unplugged the USB during one of the reboots, but now the system is stuck on the Citroen logo.
I don't know what to do, could you help me?
Hello! What is the latest software version? SMEG5.43.a.R2?
Thank You! It works without any problems
Thanks, worked great.
Hi there please help me, my radio and Sat nav doesn't work on my Peugeot 308 Gt line, please advise me what could be wrong.
Can you make reccomendation of some key issue. Mine is suggesting key not detected
sjajan posao
great job
hvala-spasiba
Pozdrav Gogi mozes li malo pomoci vezano za ovu temu oko multimedije za pezoa 308 2015
@@nenadmilijas9024 sta te muci
Moze li i meni pomoc oko ovih updata i svega
Hi friend,
is there a way to change the themes (the design)? I don't like the two installed themes.
Best Regards
hi, have you succeeded in further research on the themes? I'm thinking about some custom ones in c4 picasso
Will having System volume information on my USB stick affect the update? I'm unable to delete it
J'ai essayé plusieurs tutoriels possible dès que je branche la clé usb sa me met disque illisible
What are benefits of doing it?
Is it possible to get stuck on that installing? I m just doing it right now and it s in phase 5, uncompress/SD_DIR_TTS
Hope you got past it, mine's on that right now.😂
Hi there, thanks for the video, do you have a download link, for the USB.
Hi there, do I need to download a Rar Viewer? Before downloading the file?
Are there any new features in this version?
No
Could someone post the link to download the latest software for the later 308 (2019 model) - it's not a SMEG unit..thank you
How often are there updates?
I have a Peugeot 308 T9,2013. smeg4.1.B.R8 version CD: 20329 06/14/2013. Software 21.31. What version could I upload to this radio? Do I gain something new after uploading??? Am I missing anything?? Please help..
Hi, is there anyway to add new colour schemes?
Im getting tired of the 2 built in ones
To be honest, I don't know, I wasn't looking. Thanks for the hint, I'll try to look for information.
@@peugeoton4033 thanks let me know if you find a way pls
Hi,
I have replaced smeg on peugeot 307 with same part number, but can not change vin code and it disabled functions like musics, res sensors etc
When i try to write new vin it gives programing failed, any idea?
Sorry but no
А есть прошивка которая открывает CarPlay ?
i am trying to download the file but it does not work 😫
Hola, yo no puedo hacerlo no me deja descargar el smeg
Hy I do have a Peugeot 308 of 2014 with the firmware 4.1.b.r8 does it work?
Naturally, I can’t say 100%, but I think yes, everything should work
Where can I downoad the SMEG generator?
I had the same version like you, is this the latest now that you uploaded in description? Where did you get it? My peugeot 308 is 2017.
I found this version on Russian websites. At first it was scary to download something incomprehensible.....but it was this version that a lot of people put on and everything is ok. And you have exactly the same version as me. 2017, don't you have a NAC? Or do you have before re-rating?
@@peugeoton4033 you meant the navigation with 6 buttons? Re-designed ones have 6 buttons on navigation? I have 7 buttons like you. I put it on my navigation now I am worried that it might damage my car maybe? Can you explain please? I thought u got it from peugeot forums or peugeot website.
@@peugeoton4033 can I go back to default version somehow? I am worried because I changed it..
@@Ivan555523 It is better to download the file itself from where you think it is more reliable. The file that I have (link) is good and working. The most important thing is that the firmware version on your machine is smeg5
@@Ivan555523 I have not tried to make an older version from a newer one. Unfortunately I won 't say :(
Thank you! I did it. It was easy. But unfortunately this do not fix my problem. Over a month ago my 308 started to play from 1st song in the 1st folder of the usb stick every time I turn on the engine. Every other audio settings are memorize. When I start the engine 20-60 seconds after turning it off it starts playing where it was, right like it shuld do. So far I try to format the USB stick, try with another USB, unplug the battery for a minutes or something like that, and I was very confident that the problem will go away after flashing the firmware. But no. Still anoing 😀 If you have something in mind for my problem please share it. I am out of ideas.
To be honest, I have not encountered such a thing. I would try to change the settings (next track, random order, and so on). Maybe it will give something...
@@peugeoton4033 I already played with the settings. Nothing helps 😕. I will try to update the maps this weekend. A guy in the 308 Facebook group advised me to do that. I will give feedback.
haha having same problem, and happened also 2-3 weeks ago..
@@karloagfa2445 well, did you do anything about it? Update: my problem remains... :)
Same problem guys! Did you find a solution? Please post.
I am afraid that this might be a rare firmware error on peugeot.
One question? Do you still use thr factory battery? I do. I was thinking maybe its that. Dont know shit about cars but i am desprate 😁
Hi guys is the firmware only in Russian??
I have the same question, did we have other languages like english, germany, etc...
@@djordje11050 it shows the car language you installing it on
Hello, I have the Peugeot 308 bluehdi Active model 2016, it has no maps. Where can I find an update for my smeg?
3-4 days, and I give you this information. New video !!!
@Peugeot ON hi bro, I just use your files to update my car, but it seem like this is the update from 2017 version, is that possible for you to get me the latest update?😅
I think this is the latest update for this version of auto (SMEG). Later cars came with NAC firmware. Therefore, it seems to me that it is impossible to find the latest version of the update directly (I think they are no longer being made)
@@peugeoton4033 i have 308 from 2014 year i bought in 2018, and have never udafed maps, what are the new features and fixes in newest software?
Why this step has to be done ?
У меня нет такой кнопки Настройки.
Is there a Android Auto?
hey is it in any language or is its on russia?
Аny language
my SMEG has no hardware touch buttons on the side but system version similar - SMEG5.41.B.R4, CD:26413, Date:05-04.16. can I use your update file for Peugeot 508 2016?
Honestly I don't know but I wouldn't risk it
@@peugeoton4033 I've took a risk and everuthing works! Now I'm wondering if there are something newer than version from 2017.Or after NAC's release they stopped supporting SMEG?
@@microshaloon I'm not sure exactly, but I think something has not changed exactly. So there is no special point in updating.
Do we have apple car play on this screen
No
👍
I have a NAC !!!:)
All in Russian:(
All in Russian after the update?
Hi, does this firmware work with rt6 system without touch screen??? Thanks...
Hi, is this soft work on firmware systems with don't have NAV. My system SMEG5.2.C.R1, and my car not have start/stop system