Lol, Brutale 1000RR *Nurburgring*. If I were Italian I wouldn't want to remind people of any associations with certain events related to Nuremburg around, say, the 1930s and '40s ;-) I agree, beautiful bike though.
Thanks for the video! I’m picking one up tomorrow and already want to do some of these same mods. Love the exhaust and how you added that color pop. Have you thought of doing the clear clutch cover with red or bronze clutch pressure plate?
Love your videos, love your bike - subbed to your channel! I just purchased a 2022 Brutale 800 RR. If you still have the short brake and clutch levers, I would be interested in purchasing.
Thanks, I still love the Dragster. I was going back and forth between the two, but the spoked wheels deterred me, but now every time I look at a Dragster I want one!
Unfortunately my bike is stored for the winter so I can't make a video for a few months. If you have IG or FB you can message me on there and I can send you some photos that will help.
Unfortunately in Germany, lot of these changes would make the guarantee and insurance claims void, should you bump your bike. But other than silencer/exhaust unit, I’m not quite sure I would not need the accessories.
Hi. I know it's an old video but I was just wondering if removing the original exhaust and installing the Corso Trio wasn't too complicated. Are new seals required and to be ordered apart ? Thank you.
Looks great!! Looking at the turn signal kit, did you need to use something like resistors or another relay to make these work or is it a straight plug and play? Taking into account the original voltage that is used of 3.2v.
No, the OEM signals are LED so nothing is needed. They are plug and play. I am not sure if I mentioned it in the videon but I mounted them slightly different than they intended.
@@mzgarage , yeah you mentioned you mounted them differently and I will figure out the options to mount them similarly. I have tried other LED turn lights before though didn't achieve a normal blinking frequency using resistors, etc. As these ones work fine for you I will give them a shot.
I placed an order for one of these in October 2020. Last spring I couldn't take delivery because of an injury. I love what you did with it. What are your feelings on the transparent clutch cover? I like seeing the fluid flow inside and spin like a washing machine...Anyhow great job and thanks for the video!
Where are you located that it took so long to get one? I hope you're okay now to ride. It's such a fun bike, and thank you. I absolutely love the clear clutch cover and if it wasn't so quite expensive I would put one on. I have heard that it gets dirty on the inside, but I have never seen one in person for myself.
Hi I love your bike! May I ask you for your opinion. I am thinking of fixing rear axle spool sliders on my Rivale. But I also wish to put the bike on a left hand side paddock stand like you. My worry is damaging the rear wheel and axle in the event of a crash since I won’t have have any axle sliders. Is that a concern for you? Or is it just a trade off for having killer that look? Thanks in advance for your advice!
I actually purchased the Evotech axle sliders and I like the look of it without them better, but with that said, they were really easy to install/take off. If you had to do it each time you need to put it on the stand, it's not that much of a hassle.
No there is a aux plug under the passenger seat. I purchase that type of plug, made an adapter with a "y" and ran the wires up to the bars for the charger and the fog lights I added. There are many little channels to conceal the wires.
Hi thanks for sharing your mods. Just a question regarding the exhaust: is the heel guard mounted on the footpeg support or on the exhaust? I am interested in case I burn my boot as I will install another exhaust, the QD power gun. Thx a lot, V from Switzerland
For this exhaust the heel guard is mounted to the foot peg. I think the QD power gun has a much larger shield available, and it looks like that connects to the exhaust itself.
You know now that I think about it, I am thinking about the other exhaust that looks like the QD. The guard that I have should serve the same purpose. It's available on any of the sites that sell the Corse Trio Exhaust.
I have the same new rage fender eliminator. Are you able to make a video on what you did so that I can do the same to my 2021 brutale? Please make that video of what you did!
Unfortunately, it took a while for me to get around to editing this video and winter is coming soon. There is a storm coming in this week, so I want to get my bike put away before it gets here. Did you have a specific question on where to cut the license plate bracket. You can message me on IG or FB and I can try and help.
@@mzgarage Hey. Just need to know where you cut on the plate bracket, also did you have to do anything to the bike where you mounted it due it not fitting newer models? Sorry, I don't have FB or IG. I'll download it now though as really want to get this mounted as yours looks amazing. Whats your IG?
@@mzgarage there’s a video from MotoDeal reviewing the 2021 Brutale RR and it has a see through clutch cover where you can visibly see the clutch spinning. Looks badass. Probably a different region variation.
The Brutale 1000RR Nuremberg is the most beautiful bike.
I agree!
Lol, Brutale 1000RR *Nurburgring*. If I were Italian I wouldn't want to remind people of any associations with certain events related to Nuremburg around, say, the 1930s and '40s ;-)
I agree, beautiful bike though.
@ 😂 yes
Cool man, excellent video and awesome bike. Congrats.
Thank you! It's such a fun bike!
Please make a video about the fender eliminator / Tell tidy install. Thanks.😅
I suggest upgrading the brake pump to a brembo RCS
Thanks for the video! I’m picking one up tomorrow and already want to do some of these same mods. Love the exhaust and how you added that color pop. Have you thought of doing the clear clutch cover with red or bronze clutch pressure plate?
Glad you enjoyed the video. I would love one of those, but I just can't justify the price.
Love your videos, love your bike - subbed to your channel! I just purchased a 2022 Brutale 800 RR. If you still have the short brake and clutch levers, I would be interested in purchasing.
Sorry for the delay, just saw this. I sold them last year.
Great review very enjoyable, I have a dragster and superveloce.
Thanks, I still love the Dragster. I was going back and forth between the two, but the spoked wheels deterred me, but now every time I look at a Dragster I want one!
Hi!
I'm interested in seeing the modifications needed to install the NRC fender eliminators.
Planning to get one as well. Thanks!
Unfortunately my bike is stored for the winter so I can't make a video for a few months. If you have IG or FB you can message me on there and I can send you some photos that will help.
Unfortunately in Germany, lot of these changes would make the guarantee and insurance claims void, should you bump your bike. But other than silencer/exhaust unit, I’m not quite sure I would not need the accessories.
Hi. I know it's an old video but I was just wondering if removing the original exhaust and installing the Corso Trio wasn't too complicated. Are new seals required and to be ordered apart ? Thank you.
It's very easy, it takes no more than an hour if you're taking your time. It it's just a slip on exhaust.
Just got the bike. Love it! Did you end up taking out the db killer in the stock exhaust before you changed it out?
I do not recall there being one that can be removed.
Looks great!! Looking at the turn signal kit, did you need to use something like resistors or another relay to make these work or is it a straight plug and play? Taking into account the original voltage that is used of 3.2v.
No, the OEM signals are LED so nothing is needed. They are plug and play. I am not sure if I mentioned it in the videon but I mounted them slightly different than they intended.
@@mzgarage , yeah you mentioned you mounted them differently and I will figure out the options to mount them similarly. I have tried other LED turn lights before though didn't achieve a normal blinking frequency using resistors, etc. As these ones work fine for you I will give them a shot.
I placed an order for one of these in October 2020. Last spring I couldn't take delivery because of an injury. I love what you did with it. What are your feelings on the transparent clutch cover? I like seeing the fluid flow inside and spin like a washing machine...Anyhow great job and thanks for the video!
Where are you located that it took so long to get one? I hope you're okay now to ride. It's such a fun bike, and thank you. I absolutely love the clear clutch cover and if it wasn't so quite expensive I would put one on. I have heard that it gets dirty on the inside, but I have never seen one in person for myself.
Hi I love your bike! May I ask you for your opinion. I am thinking of fixing rear axle spool sliders on my Rivale. But I also wish to put the bike on a left hand side paddock stand like you. My worry is damaging the rear wheel and axle in the event of a crash since I won’t have have any axle sliders. Is that a concern for you? Or is it just a trade off for having killer that look? Thanks in advance for your advice!
I actually purchased the Evotech axle sliders and I like the look of it without them better, but with that said, they were really easy to install/take off. If you had to do it each time you need to put it on the stand, it's not that much of a hassle.
How did you wire the quadlock? Is it directly connected to the battery?
No there is a aux plug under the passenger seat. I purchase that type of plug, made an adapter with a "y" and ran the wires up to the bars for the charger and the fog lights I added. There are many little channels to conceal the wires.
Thank you @MZ Very cool Man. do you still have the brake and lever clutch for sale? Im from Dallas. Im interested to buy it if still available.?
Thanks! Yes, I do still have them.
Hi thanks for sharing your mods. Just a question regarding the exhaust: is the heel guard mounted on the footpeg support or on the exhaust?
I am interested in case I burn my boot as I will install another exhaust, the QD power gun.
Thx a lot, V from Switzerland
For this exhaust the heel guard is mounted to the foot peg. I think the QD power gun has a much larger shield available, and it looks like that connects to the exhaust itself.
@@mzgarage thx for your quick reply. Are you sure about the shield? I red on their youtube channel that nothing was planned, question of style 😄
You know now that I think about it, I am thinking about the other exhaust that looks like the QD. The guard that I have should serve the same purpose. It's available on any of the sites that sell the Corse Trio Exhaust.
Love it… where did you get the paddock stand or what make is it ..?
Thanks! It's a Pitbull stand.
well done
I have the same new rage fender eliminator. Are you able to make a video on what you did so that I can do the same to my 2021 brutale? Please make that video of what you did!
Unfortunately, it took a while for me to get around to editing this video and winter is coming soon. There is a storm coming in this week, so I want to get my bike put away before it gets here. Did you have a specific question on where to cut the license plate bracket. You can message me on IG or FB and I can try and help.
@@mzgarage Hey. Just need to know where you cut on the plate bracket, also did you have to do anything to the bike where you mounted it due it not fitting newer models? Sorry, I don't have FB or IG. I'll download it now though as really want to get this mounted as yours looks amazing. Whats your IG?
instagram.com/reel/CiAstuCIH-Q/?igshid=MDJmNzVkMjY=
I think I have the piece I cut off. I can send you a photo so you can see where I cut it. It doesn't have to be exact.
@@mzgarage hi can you share the picture with me as well. I'll message you on instagram
Are you using the stock headers? How you polish the pipe on the right side of the bike?
Yes, stock headers, have not changed anything on the engine. I am not sure what part you are referring to that looks polished?
would the red levers fit my 2020 Brutale 800RR SCS? And if so, do you still have them?
I am pretty sure they are the same, and I still have them. I can double-check compatibility, it's been a while since I've looked.
this fender eliminator would definitely not be legal in Europe..too bad because it looks great !
I know! I see all the Euro pics in Facebook groups. Such a shame you have to add those ugly things on.
I thought these had the see through clutch cover?
Clear clutch cover?
@@mzgarage there’s a video from MotoDeal reviewing the 2021 Brutale RR and it has a see through clutch cover where you can visibly see the clutch spinning. Looks badass. Probably a different region variation.
They are available after market. I think the only model that comes with it is one of the RC models.
Congratulations on the videos I am buying the same bike, I would like to get in touch with you on instagram. Nice work continues like this
instagram.com/reel/CiBSxarqbEQ/?igshid=YmMyMTA2M2Y=