How to Replace Fuel Pump Module Assembly 2002-2008 Dodge Ram 1500
HTML-код
- Опубликовано: 9 апр 2023
- Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ia/1AFPU00384
This video shows you how to install a fuel pump module assembly on your 2002-2008 Dodge Ram 1500. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500
Tools you will need:
• 10mm Wrench 1aau.to/oSv/1AXAA00010
• 15mm Socket 1aau.to/obj4/1AXAA00015
• 7mm Socket 1aau.to/oa2y/1AXAA00017
• Fuel Line Disconnect Tool 1aau.to/oW/1AXAA00041
• Needle nose pliers 1aau.to/oBA/1AXAA00051
• Needle nose pliers 1aau.to/oBA/1AXAA00052
• 7/8 Inch Socket 1aau.to/oa2/1AXAA00042
• Torque Wrench 1aau.to/oaxN/1AXAA00044
• 3/8 Inch Wrench
• Gloves 1aau.to/oSh/1AXSS00048
• Safety Glasses 1aau.to/oKB/1AXAA00343
• Brass Punch
• Drain Pan 1aau.to/oxk/1AXAA00320
• Floor Jack 1aau.to/oXY/1AXAA00068
• Pick 1aau.to/oKV/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I am about to do this job on a 2005 Ram 1500. In preparation, and to avoid any gotchas, I went to RUclips. Your video is by far the best I have found. Most are unedited, shaky cell phone video that is just nauseating to watch. THANK YOU !!! so much for producing a quality video of this procedure.
Yeah I'll just head to the shed and grab my tank jack...lol
Thank you . I appreciate the simplicity of your video.. Will tackle it next weekend
I’m the best at mechanics but you guys helped me change my fuel pump with my own two hands! Thank you guys so much!
I went with the route of taking the 6 truck bed bolts off and lifted up the bed and crawled in there but no matter what, my truck is running again!
@6:00 you should be able to just push in and it come right off... oh i laughed and laughed and laughed...
As always, great video. At 210k miles, my 2007 Ram 1500 HEMI's fuel pump finally gave out. Thanks for this great video helping me navigate all of the challenges that I did not expect. Note, our tanks are not the same. :D
I recently did this on my 05 ram 1500 and I found removing the driveline made it a LOT easier since I don’t own a car hoist. Using jack stands and a floor jack it went well. I did buy the adjustable equalizing bar for my floor jack from Harbor Freight so I had a lifting pad under each half of the fuel tank.
By removing the driveline it gave me the chance to replace the rear Transfer Case output seal after draining the oil. Once all done I put new oil in my Transfer Case. I was shocked that it only holds approx 9 pints of oil though.
Mines a 2011 but this was still very helpful.
I was so invested and wanted to hear the truck start.. lol
Thanks for showing me how to undo the fuel line clip. I took a long time on it just to make sure it didn't break.
The welds on that exhaust are great 👌🏼
Definitely the best video for this job. Thank you
Excellent video thanks for posting. I’ll be replacing a 04 call Ram fuel pump today. Wish me luck.
I must say this is one of the best video and step by step explanation, thanks so much & blessings. 😉👍
Thanks for the video and advice. You were the only video I could find that actually took the time to show the fuel line fitting connection to the fuel pump and what happened after the fuel line tool wouldn't work and it took the small screwdriver 🪛 to get it to release. Happened to be what I am trying to get released and it was helpful for me and getting mine done 👍
I am doing this on my 2005 Ram 1500 today. I have the tank out, but my locking collar looks like it is rusted to pieces. I guessed that it would need to be replaced so I ordered a new one, but looking at your video, most of mine seems to be turned to rust. I have been working at it in hopes of knocking rust loose so I can set the tabs that I need to get at to get it to move. I am not sure many of them are left. It is cold, so I needed to come in and let my hands warm up before continuing.
Great job explaining the procedure. Personally think I'm going to have dealer do it and pay big bucks. I have no real way of utilizing a lift or tank support jack. Thanks a bunch, most appreciated.
Thanks for the video, as always is very well done and instructional. I have a question though, Why is necessary to disconnect both battery ends? why not only the negative?
Would it have been easier if you took the bed of the truck off?
Is the pressure regulator built into this pump?
Have a question. I hope you can answer what is the thing next to the fuel pump with other hoses connected to it? I have a small evap leak on my 05 and I did a smoke test and it's leaking there.
Idk but I bought a fuel pump for my 2004 ram 2500 5.7 and it looks like this video, but the one on my truck looks different has a metal fuel filter on top and the parts store doesn't have the one like the one I see on my truck. Will it fit?
Great video, I do question why you are repairing a truck with a massive hole rotted in the frame.
Do you assume that everyone has a vehicle lift. These videos are for backyard/home mechanics.
Do you think I could do this by pulling the bed instead of putting the truck on a hydraulic lift?
The batt terminal is 10mm
How much gas should be in the tank when doing this
What's the other white part on the side?
Its must easier to remove the bed than to "go ahead" and drop the tank.
I think you removed the wrong relay. 58 is the 3rd one on that row. You removed the 2nd one😅
What about the float you didn't take any measurements for the float the height of the float
Before every step you have to "go ahead"!
To much work. Just pull the bed back and its right there and easy to work on
that truck was a rusty mess
Too much work.
Wouldn’t of even wasted the money on a fuel pump for that truck with that frame rotted out like that