Charging station for lithium batteries 18650 12 cells, home battery charger
HTML-код
- Опубликовано: 25 июл 2018
- How to make a home 18650 battery charger with TP4056 charging modules for lithium battery cells. I made a charging station for 18650 lithium batteries.
In order to charge this type of batteries we need a charge controller, as TP4056 load modules, this ensures that the battery reaches the correct voltage without suffering damage.
In this video I show to build a loader yes you still don't have your loader now you can make it for very little money.
Materials:
3mm acrylic plates, optional You can use Ortho type of material battery holder 4-cell 18650 3 units load Modules TP4056 12 units
Strip or nickel tape, optional You can use other type of material 4 small bolt
Cables for your wiring
Female Banana Connector
Instant glue
Silicone
Battery charger module 18650
amzn.to/2XHeM4E
Battery case 18650
amzn.to/2XJt1pI
Background sound:
[No Copyright Music] Star Eyes-Urpleactus star eyes by Urpleactus urpleactus.bandcamp.com/
Creative Commons-Attribution 3.0 unported-CC BY 3.0
• Star Eyes - urpleactus...
[No Copyright Music] Tonight-FortyThr33
• Video Наука
Muito bom parabéns interessante, eu carreguei as minhas com as tp4056
Llevo casi un año cargando celdas de litio 18650 con los módulos tp4056 con protección y en una configuración similar a la tuya pero yo le agregué un voltimetro a cada celda y un amperímetro para la carga total un interruptor a cada módulo...y es que estos módulos son fascinantes dan protección hasta de corto circuito y en esta configuración es carga independiente para cada celda .... excelente trabajo
Amigo una pregunta, las pilas las carga independiente. No influye cantidad de pilas que carga en tiempo total???
wow impresionante
Excellent video.
Those edges came out pretty straight for cutting freehand! Clamping a straightedge or a straight board to the scroll saw table as a guide would give a nice, straight cut.
Excelente como quedó muy buena idea
VERY GOOD WORK VERY TIDY AND WELL LAID OUT I MADE ONE AND IT LOOKS LIKE SH T BUT IT WORKS THE PERSPEX LOOKS GREAT THANKYOU FOR TAKING THE TIME TO SHOW US HOW TO DO IT RIGHT
La verdad, te quedó con madres👍
Exelente, gracias.
Excelente video. gracias.
FANTASTICO
Nice job 👍
I like the buzz bar idea
Very clean and nice work 👍🏼
buen trabajo!
Me gusta. Saludos y gracias ¡¡
belle réalisation !!! propre net soigné !!! efficace j'adore !!!!!
Great video.
Muy bueno video.
Muncha suerte
Music drives me crazy. Talk to me.
Very practical and smart also a fun project for anyone who uses 18650 batteries on a regular bases like hmmm 🤔 people that vape 💨 💨 💨 can you make a video for a diy lipo pack charger ?
lovely explanation
nicely done!
great project
Excellent Video, neat and clean presentation.
ahi esta el pedo: tardaras demasiadas horas para cargar una serie de baterias !! por lo menos necestiras unas fuentge que te pueda entregar 12 ampedos a 5 voltios, donde conseguirla ?? como fabricarla?? para quienes vayan a armar esta exelente idea de este talentoso brother este es el un consejo para complementar: deberas considerar MINIMO 1.0 amper por cada modeulo TP4046, SI TU FUENTE no da el ancho mejor sera disminuir la cantidad de modulos . SUERTE .
Great job
Muy buen trabajo y sobre todo limpio enhorabuena amigo..
Yo estoy con un proyecto de 10 bt3100 y 40 tp4056 para un powerwall ahora solo me faltan 400 celdas todavía
buen trabajo amigo, yo tengo algo parecido al tuyo pero ademas le conecte un mini interruptor a cada circuito tp4056 para apagarlo o encenderlo individualmente por si no necesito cargar todas a la vez, asi los circuitos tp4056 que no trabajan pueden estar apagados y alargar su vida.
good job.
Неплохо. Только учтите модули разные и токи и напряжения т.к. существует разброс параметров микросхем. This module is different on same part. Ic is not pretensions. One accumulate is be different voltage of charge. The case is good. Корпус придумал хорошо.
Good Idea~^^
Te Quedo Hermoso Amigo Una Pregunta Tambien Se Podra Usar Como Banco De Baterías?
Buen vídeo para 18650, podrías hacer un vídeo para medir la capacidad real de las baterias de celular? ya sea de 2000, 2500, 3000 mah o más. Saludos
Awesome
Hola muy buen video,consulta puedo seguir todo los pasos pero para hacer uno de 40 baterías ??????
Nice
good woork
Excelente vídeo , solo que necesito saber esos cable que usa donde lo puedo comprar no quiero cable de cobre es mas difícil para soldar
Although it is nice work but used so many TP4056. And can't charge by a simple charger or need a at least 10A charger. But the charging station is beautiful, and I like that.
si necesito 12 v sumando series de 3 pilas ¿puedo usarlas directamente desde el portapilas? tenes algún vídeo ?
Poderia ter retirado as entradas para usar em outro projeto
Se puede conectar la salida de la carga en serie con otra batería para sumar el voltaje ??
Nice 👍🏻👍🏻 🇮🇳 || Kuki 12|01|2022
Excelente, nunca fue tan fácil realizar una bomba casera con dinamita de colores 🤗😂
A que te refieres con bomba
Can we also combine load of these modules?
wonderful wesome
A que corriente cargas cada celda?
thank You for Best vedio,,, how many volts and amperes charger are needed to charge these 12 cells at a time ?
5 volts, 1 amp per cell. For this charger you need at least 12 amps
@@SagazPerenne actually i have a phone charger giving 5v 500 mah and still charges the 18650 cell almost same time as 5v 1 amp because the amp of the charging gets lower the fuller the battery gets so at the end its only charging with 100 mah so i would say 5v 6amp would deffintely work also..
according to this video ruclips.net/video/NSfjiBDyYn4/видео.html&ab_channel=LithiumSolar it uses about 5v 600 mah per 18650 to charge with tp4056 so 12x0.6 makes 5v 7.2 amps
Can we add an usb and get battery charge from this?
Does the out pads next to the battery pads output 5 volts? Can those be hooked up in parallel, and if not, what is the max current on them? If you want to make a battery bank out of this charger.
Hi 😁,16 cellss ,2 hours fully charged , did you using 10 Ampere?
Great charger but you can simply charge them in parallel dont need all the circuits. Only series packs need to be externally balanced
donde puedo comprar la sierra de mesa que usas para cortar las planchas de acrilico?
What is the type of the IC?
Please tell me what is the voltage/amp you used to charge the 12 cells? Great job and thank uou.
Maestro
All the board TP4056 input connections you made it as a parallel connection fine, but what is the actual input required for each board...? that same voltage(5v is ok understand )also amps should same for all right ..? then why you supplied input 12amps .? can you please reply is it as per each cell holder(there are 4 holders each required 3amps ).you should also supply 3 amps right.? actually each TP4056 required 5v1amps i think ?
pasaste 10A, por unas pinzas caiman?
OBVIO NOOOO ¡ no pasaran, aqui se esta disminuyendo el ampereje y tardara demasuiado en cargar. UTILIZAR MINIMO UN BUEM JUEGO DE CONECTOR BANANAS DE UNOS 4 mm ayudaria a este cuelo de botella..saludos!
alguien sabe porque cuando le mando corriente directa del cargador de la notebook hace corto? con todas las pilas hace lo mismo
Excelente amigo, solo que no veo nada de info sobre la fuente de alimentación, la hiciste tú.?? O se puede conseguir.?? Saludos
La puedes hacer con una fuente de PC
How to calculate the input current
👍
Us se battery charging to kar liya, wonha se battery out put nikal ne ki tarkib jara batayenge...
The project is great!
But that music really takes away from the whole of the video.
Ye sab material kaha milata hai
hola muy buena tarde para preguntar, con estos cargadores ¿también se pueden utilizar para cargar baterias AA Ni-MH?, es un excelente vídeo le mando un cordial saludo.
No, las baterías Ni-MH son a 1.2v y este modulo carga entre 2.9 y hasta 4.2v
Hola amigo super bien una pregunta a cuanto amperio quedo cargando cada pila ?
Esos módulos cargan máximo 500 mA
eso con una fuente de pc de unos 30ah en 5v no habrá problemas en cargarlos
Me gustaria sabes con cuanto voltaje tendrias que alimentar al final todos los citcuitos ya unidos
5V de corriente y 1A por cada modulo TP4056, la fuente con la que conecto todo entrega 5v y hasta 40Amp.
For this whats is the dc power need to charge
how much input voltage
Just something I N S A N E
класс
cuantas baterías lograste recuperar cuando abriste las baterías de laptop? vale la pena abrir una batería de laptop que ya casi ni le dura? necesito baterias para un proyecto, pero solo me sirven si al menos tienen 1,5 o 2 amper
Claro que vale la pena, recuerda que las baterías de lapton con una celda que se dañe se descontrola, pero la mayoría de celdas quedan buenas, te recomiendo utilizar un medidor de capacidad un cargador opus
How to limit the cut off voltage to 4,1V ? Resistor X Ohm in series on module out?
Tp4056 does the job
保護差了點,設計的很好操作使用方便,往往成功首先思路很重要。
how many hours does the battery needs to be fully charged by tp4056?
Hi, hello, my name and theophilo, I found your project very interesting, it has a way of exiting for iphone and usb too. Can I use a cellphone source to charge? Congratulations, your project was very good.
Hola como puedo aser pidido del sistema para conectar las paterias hay otros con displey con pantalla como ago pedido respuesta xfa soy de bolivia
can i get series output voltage?🙄
Hola buenas , yo estoy haciendo uno también y e probado provisionalmente con uno solo y es normal de que se me encienda la luz roja y una azul a la vez
E de decir que la fuente es con un transformador de microondas modificado con salida a 5v. El amperje que saca no lo se ya que no lo e comprobado aún aún que se que es bastante elevado , aver si me podrías dar alguna solución.
Gracias
Can I use one module to charge 4 cells
If that would be possible he probably would have done so.
You can, but charging current is divided so charging is slower
Can i use 1 module for 2 or more battery charging ?
yes, but in parrallel.cmiiw
Isnt those wires too thin to carry 12amps provided each battery charge at 1 amp
its not
12A in those tiny cables ...
Yo prendí un play station 2 con baterías 18650, está en mi canal
add a voltmeter and a capacitance meter to each charge
why green led shows if its full
Not a lot of people have a 5V 12A or higher power supply.
NO VOLT DISPLAY? WEIRD, INCOMPLETE, BUT NICE BUILD
donde esta el link del Planchas de acrílico de 3mm ?¿?¿?¿?¿?¿?¿ lo quitastes
Itni sari TP-4056 lagana jaruri he kya???...
Jab ki aapne sab me series connect kiya hua h...🤔
Ek TP-4056 laganeka disadvantage kya he???
ek se charging dead slow hojayegi ...... it charges with 1A, i m getting very less charging current, way less than 1A
Assuming the capacity of one battery is 3400 mA, will the capacity of three batteries in series become three times?
نعم (4.2v 10 Amper)
Please output
Bos días
é posible facer máis módulos que este e conectalos xuntos e cunha fonte de alimentación do PC?
grazas
2:50 he glued himself 😂😂😂😂😂👍😭
I want to build a power bank with one tp4056 charging module for each battery say about 10 batteries 18650, 3.7V, 3000mah each and I want output of 5V, 2A, 30000mah. How can I get that? shall I join all positives points of module and negatives points and get the power ???
I have seen your video, It wat somewhat helpful to me, please suggest
Hola quisiera saber si podria cargar unas baterias 18650 si las conecto a un celular, es decir, conecto las baterias a los terminales donde va la bateria original del celular
Si puedes pero antes tienes que poner un controlador de carga yo lo saQue de la batería del celular por qué ya no cargaba y se la puse tienes que soldar positivo con positivo negativo con negativo tal como está entrando en su batería original yo le puse dos baterias en paralelo con un solo controlador y me funciona bien y me dura más tiempo la carga
Juan Alberto Mamani Caceres como un controlador? El del mismo celular o otro aparte?
@@joaquinrivero7864 tienes que sacar el circuito que lleva la batería está en el lado de los conectores
@@juanalbertomamanicaceres1806 Ahh ya entendi muchas gracias
Eso mismo hice yo, con un circuito de baterías samsung cargo 4 celdas de esas a unos 600mA aprox
12 amps
Or six. :-)
Les agregas un diodo a cada una y les pones una tarjeta para dar 5v y ases un súper power bank
Amar 1pich lagbe
Холдеры и платы зарядки стоят вместе столько сколько стоит нормальная зарядка ,на несколько акб ,да и к тому у зарядного заводского устройства есть чёткая индикация ,да к тому же есть индикация ёмкости ,индикатор напряжения,режимы теста и времени.Так ,что хватит людям ненужную головную боль рекламировать . )