This is not encoder, it's 10k potentiometer. You can use directly, but wheel will be just 270 degree. To increase degrees of rotation, we have used gears.
This firmware doesn't work with encoder. There is new version of wheel, you can make this version with rotary encoder: ruclips.net/video/6pEiYvWLGJ4/видео.htmlsi=sxaTuGF_tOPdNSgE Complete playlist: ruclips.net/p/PL4B0LEKY-jrROPZPEDMZ4DPqISPXvVsdL&si=qAb80jzDaFeD69gm
Can i add analog( as shown in you ffb steering video )clutch,break and accelerator and use adruino Uno to configure all of them along with this steering with a 100k potentiometer.
To upload the firmware, you have to go into DFU mode which is possible only in DIP version. Used in this tutorial: ruclips.net/video/CPWPPu2dR7M/видео.html But this is not possible in SMD version
@@techathome im facing similar issue if i turn the wheel right it slow and smoothly turned, if i turn left it rapidly turn what should I do? b10k potentialmeter is used
@@techathome thanks for your videos! I've been looking at them and I'll try it this week, my idea was to make the steering wheel with 900° and add buttons for turn signals, lights and paddle changes. thanks again for your videos! They motivate a lot lol
@@techathome sorry for the inconvenience but do you know if it is possible to use 20k or 50k potentiometers? unfortunately they are the only ones I have available :(
Thank you very much. I had an idea how to do it😊
Welcome❤️
Bro what is the size of bearing
Bro can i just attach a Rotary Encoder to the shaft of the steering Wheel ?
Are you referring to FFB wheel tutorial or this video?
@@techathome only this video so without the Gears only stach the rotary Encoder to the Steuerung Wheel steering
This is not encoder, it's 10k potentiometer.
You can use directly, but wheel will be just 270 degree.
To increase degrees of rotation, we have used gears.
Bro is it 270 degrees rotation or 900 degrees. If it’s 270 degrees how can I make it 900 degrees rotation
Please Reply😢
Potentiometer is 270 degrees , After using the gears the steering is 900 degree.
i use one small and one big wheel and used a ruber band to conect both instead of gear it works same as gears
Nice 🙂
@@techathome brother i have a question can we make force feedback wheel with arduino UNO?
No.
bro can you make steering wheel using fan gear box pls
Can you send any photo?
@@techathome how? Instagram?
Hello! I need some help. I don't have a 3d printer for the gears, is there any way to use a rotary encoder module instead?
This firmware doesn't work with encoder.
There is new version of wheel, you can make this version with rotary encoder: ruclips.net/video/6pEiYvWLGJ4/видео.htmlsi=sxaTuGF_tOPdNSgE
Complete playlist: ruclips.net/p/PL4B0LEKY-jrROPZPEDMZ4DPqISPXvVsdL&si=qAb80jzDaFeD69gm
Which types of potentiometer is used like single turn or multi turn ?
Normal single turn 10k potentiometer is used.
To increase the rotation to 900 degree, gear mechanism is added.
Sir can i make this gaming steering with arduino nano pls replay to me
No
@@jesinsinan7044 you can make one with arduino nano, fork adafruit's hid gamepad library and use it.
Will arduino uno (SMD IC ) work for this project?
No ,
Only DIP version works
Hey bro did you try makind it with your smd ic one pls tell bro
SMD version of Arduino has ch340 chip for serial communication.
But this firmware is for 16u2 chip which is present on Dip version of Arduino.
Can i use ready made steering wheel from Amazon that are for swaps for high class wheels such as g29?
Yes
Can i add analog( as shown in you ffb steering video )clutch,break and accelerator and use adruino Uno to configure all of them along with this steering with a 100k potentiometer.
Use this circuit and code: drive.google.com/file/d/12i-rsl3xpVoyA1x3x1BKBp0t-3153vR1/view?usp=share_link
If we use multi turn potentiometer can we not use the gears and will we get the same experience??? Pls reply
Nah the ratio will be the same
hello, is it possible to give both gearwheel models in a4 form?
Bro can we use ttp223 sensor instead of the buttons
In this code, the digital buttons should be connected to GND to activate.
If this sensor gives low signal when it is activated, then it might work.
Pls help me !! Does 14 teeth gear will work ??
Yes
Can we add dc motor to feel the force feed back.....using multi turn potentiometer
That is not possible in this
Its not possible cuz dude dont use leonardo
@@MAlif-qg5snit's the fucking same thing as other Arduinos
what game were you playing at the end?
Euro truck simulator 2
I would like to see playing in Gran Turismo 7 or Asserto Corsa competizione if it has the same precision.
I tried on Forza horizon, It won't work.
This is good for simulator like Euro truck
@@techathome how do you mean it won't work with Forza Horizon? Is it just not precise enough?
@@masskonfuziondid you try it?
No not yet - I wanted to hear what the precision issues are. But I want to try it..
@@masskonfuzion so i read some comments on this video and i think the issue is that the arduino isnt getting detected as a gamepad
Does it work on Arduino Pro Mini?
No
How do you findthe center position of steering wheel
You have to check in game controller properties.
Refer this video completely: ruclips.net/video/CPWPPu2dR7M/видео.html
Hello sir How to upload the Arduino Uno firmware, what is the Smd Atmega 328 version
To upload the firmware, you have to go into DFU mode which is possible only in DIP version.
Used in this tutorial: ruclips.net/video/CPWPPu2dR7M/видео.html
But this is not possible in SMD version
@@techathome means the smd version cannot be used to make a steering wheel
Yes not possible with SMD
@@techathome the amd version can't enter dfu mode is there a way is there really no such feature for smd only dip
Can i use 10k Ohm 3590S Precision Multiturn Potentiometer.
I have not tried that,
It might work.
@@techathome that Potentiometer has in built 10 turns so we didn't need to use gears that's why I asked you
Then it should work,
At the end Arduino need voltage drop.
@@techathome so can you help me what should I do
@@techathome can u give me your any other contact method
Bro plz make one video of installing a game in laptop with h shifting
Bro i want to make a steering wheel of 900° but i cant afford gears and things Bro Can make using mouse till 500-600 °
ruclips.net/video/Q2bSPUvMQWE/видео.htmlsi=JtYI1ABQSGCtzw_L
What if we use b20k potensio😅
Functionally it will work, i think there might be slight difference in the rotation.
how to deal with the potential vibrating when in use, how do you make it not vibrate when playing the euro truck steer game to vibrate
Use B10K potentiometer.
@@techathome im facing similar issue if i turn the wheel right it slow and smoothly turned, if i turn left it rapidly turn what should I do?
b10k potentialmeter is used
Did u use Arduino Uno or Leonardo
Arduino Uno
Tutorial link : ruclips.net/video/CPWPPu2dR7M/видео.html
Hy can this satup work for bus simulator indonesia game
Yes, It will work
Please make and vedio with bus simulator Indonesia game with string wheel and gear
Will it work on assetto corsa?
No
Bro what is the name of the game that you are playing
Euro truck simulator 2
Can i use 15 and 60 ?
Yes you can use.
Bro what kind of wires u have used in your project
Jumper wires , you can use any, no specific
Why dont you connect it to a cheap controller ?
This firmware is only supported for Arduino uno.
Which game was in starting
Euro Truck Simulator 2
@@techathome thanks
Potentiometer link please
robu.in/product/10k-ohm-3pin-15mm-shaft-potentiometer-pack-of-3/?gad_source=1&gclid=CjwKCAjwrIixBhBbEiwACEqDJRzZ6C4ovcPyKpg1oJxd2siAU7StePwtmPq33Jq027l6QmVxxaUtPRoCWqIQAvD_BwE
What is Rod Width And Length
30cm 5mm thickness, Its also explained in the video.
where will ut be availble electronics shop?
@@techathome
Wait how it is single turn potentio?
It is normal 10k potentiometer with outer body made of plastic
To increase turns, we have used gears.
Bro i use same 10k potentiometer but its turnings are not smooth as it is shown in the video
Are are using gear wheels like we have shown or directly potentiometer
Name for potensio??
B10k
How should I buy the potentiometer? 10k For Arduino?
Yes, 10k normal potentiometer
@@techathome thanks for your videos! I've been looking at them and I'll try it this week, my idea was to make the steering wheel with 900° and add buttons for turn signals, lights and paddle changes. thanks again for your videos! They motivate a lot lol
@@techathome sorry for the inconvenience but do you know if it is possible to use 20k or 50k potentiometers? unfortunately they are the only ones I have available :(
You can use any value of Potentiometer. It doesn't vary much.
Bro did u make it?
Which game?
Euro truck simulator 2
will this work on forza? if not then why?
No, the game does not detects the unojoy device firmware
@@techathome what if I use emuwheel
Can u made one for me and i will buy it please
Bhai ismein force feedback toh hai hi nhi…. Feel kaise aayega
We will make it soon
This is just improved version from our old one with direct potentiometer connected to steering
Bro would you like to sell it for 2000
No we are not selling, we will be doing some upgradation to this.
you using in video 15 thoot in Amazon gear14 thoot
One tooth does not make major difference on this project.
Instead of 14 can I use 26 teeth?
Please reply fast
No
Which potentiometer you use
B10k
It is normal 10k potentiometer.
Bro please play forza horizon 5
This doesn't work.
WTF ????!? 🤔
Can i play gta 5
No
Work good for Euro truck simulator
Does it work on Arduino Pro Mini?
This UnoJoy firmware is only for Arduino Uno