DIY Force Feedback Steering wheel | Circuit and Software Setup [in ENGLISH] , DIY Sim Racing Wheel
HTML-код
- Опубликовано: 22 июл 2024
- Hello guys,
In this video you will find the connections and software configuration for FFB steering wheel and analog pedals. Hope you guys like it.
Also make sure you subscribe to us for upcoming upgrades.
*-*-*-*-*-*-*-*-*-*-*-*-*
Related tutorials:
Part-1(Analog Racing Pedals) : • DIY Sim Racing Pedals ...
Part-2(Force Feedback Steering hardware) : • DIY Force Feedback Ste...
Part-4(Paddle Shifters) : • Paddle Shifters for DI...
Part-5(Gaming RIG) : • DIY FFB Sim Racing Rig...
*-*-*-*-*-*-*-*-*-*-*-*-*
Related links:
Download all source files here: drive.google.com/file/d/1JuG6...
EMC facebook page: / emcdeveloper
*-*-*-*-*-*-*-*-*-*-*-*-*
Components I have used:
Arduino Leonardo: amzn.to/42Oh68e
2-phase 600 PPR rotary encoder: amzn.to/3ofrirt
BTS7960 motor driver: amzn.to/3nGMeXJ
24v, 250W Ebike motor: amzn.to/42QukBB
B10K single turn potentiometer
Timing Pulleys used-
22 teeths, 12mm width XL pulley - 2pcs
15 teeths, 12mm width XL pulley - 1pcs
60 teeths, 12mm width XL pulley - 1pcs
Timing belts used-
110mm length , 12mm width XL belt - 1pcs
220mm length , 12mm width XL belt - 1pcs
Alternative motor 100W: amzn.to/42Rjqvm
1000 PPR encoder: robu.in/product/orange-1000-p...
-*-*-*-*-*-*-*-*
Timestamps:
00:00 Introduction
02:28 Circuit Connections
08:14 Software Configuration
15:20 Pedals, Steering Calibration
17:03 Wheel Check
18:48 Gameplay Demo
21:45 Convert Arduino to Normal
*-*-*-*-*-*-*-*-*-*-*-*-*
Follow us on Instagram :
/ tech_at_home
Like us on Facebook :
/ tech-at-home. .
#ffb #simracing #logitech #inventors #gamingsetup #emc #forcefeedback #arduinoprojects #unojoy #ets2gameplay #gamingwheel #directdrive
Thanks for watching!
*Like Share and Subscribe Наука
so excited with my steering wheel project!! today i going to start with the wiring, thank you❤
Welcome
Finally my steering wheel is ready to play the game without any problems and bugs, 😊 thanks Tech at Home.
Welcome
Some glimpse of your steering wheel
What type of motor u r using?
I am using 775 dc motor for steering feedback
What are the pulleys specifications?
Oh my god!! Brother you really made the fantastic video!! And your video have all knowledge of about car controller that I need.
Thank you so much Brother!!!💕💕
Welcome!
im trying for like 2.5 hours and you helped me thank you soooooooooooooo much im making this for a school project with legos thank you again
Welcome
Bonjours! Après beaucoup de recherche pour construire volant et pédale, tu es le seul que chez trouver qui explique d'une façon très explique et détailler, donc! un gros merci a toi!
WELCOME♥
Finally! i build this set in 2019 but i also get a lot of problems with old software and calibration. Now its work fine C:
sameee , i built and had it working for a test in 2022 and after that was just problems with the software ,this emc actually work properly
do you know if there is a way t9 make it compatible on various video game consoles
@@MrrOogwayit works on forza horizon 5?
@@Tom_Jerry2449 if I'm being honest I didn't get the time to finish my steering yet so I have no clue what it works on,sorry
@@MrrOogway thanks
You are the Master 😮 thanks for this very beautiful understanding video.
Welcome!
Hi, another great video!! I would like to ask you if I can mount 12mm round buttons with 3 pins (vcc, out, gnd) on the steering wheel. if so, which pins will be used and which one does it correspond to on the diagram? because in the diagram there are only 2 pins without specifying which ones. forgive my ignorance. Thanks in advance
I started to build mine a year ago, didn't really had the time to finish it. I continued the project just for my power connector to fail. The plug got a short and the two connector welded together. :D
Which power supply do you use
I am using 12v, 5A.
But motor can go upto 24v, 13A.
@@dankdadTech I used a PC power supply. I used a 12V wire. But I abandoned my wheel project, I bought a wheel. When I'll have the time I plan to make a 2 DOF racing sim.
@@meeeaCH9612wich Wheel did you buy
@@DarkRange-vw2pn Logitech G29, its not the best option, if you can get an older one used or new, go for it. Or if you have more you can get a Fanatec CSL DD Ready2Race Bundle.
perfect school project , thanks for the idea (:
Welcome
Did you finish your school project?
hi bro..i want to ask..i also done diy one wheel using emc software that u are use.but why in dirt 2 game when im play that game i got error that im lost ffb?the wheel fnction also detected but no ffb in game.can u help me?
This is the best tutorial
Thank you
este proyecto es increible, muy buen trabajo :D
Thank you!
wow done an amazing job
Thank you ❤️
killer build wtg man
Thank you!
Lets goo 💯💪
Amazing 🤩
Thank you
what do you mean when you say if we want to turn the Arduino to normal, wait if I bought a new arduino do I have to upload " return to stock" hex file before I upload the emc hex file in order it to work?
No , not after buying the Arduino.
After uploading EMC firmware, if you want your Arduino to have default firmware, then use that return to stock hex file.
Hello. Nice Job. I'm searching to also make my own ffb wheel for my xbox one s. Will that work for me? Otherwise what I have to do to make it possible for Xbox one s?
Would you please share the USB descriptor? I'm using a Arduino nano, and i have successfully created a USB circuit with a working encoder.
Can i use any other motor driver like the L298N MOTOR DRIVER BOARD or does it have to be the same as the vid
You can use, still better to use the one shown in the video. Cost wise very small difference.
L298N cannot handle more current, it can burn frequently.
great video, i am having trouble in transmission the forward and reverse function using potentiometer pedals sometimes work and sometime don't work please help
I am not able to understand the exact issue you are facing.
there are 4*4 button matrix, which is 16 buttons, out of that can I use 8 buttons for H-shifter and the rest for in game button control ?
Yes you can use in that way.
This video will help you: ruclips.net/video/-gHQ2EIYm88/видео.htmlsi=mhOqbapQ1mWOTYIs
If i want to make only the pedals and not wheel can you please tell what modifications i have to do in arduino board or i just connect the pedal potentiometers and it will work?
yes, just connect the pedals potentiometer and calibrate.
I used a 24volt motor, I did everything like you in the video; but when I test the force feedback, with the cycle 'mode' everything is fine but instead when I use the ''normal'' mode in the test when I turn the encoder to the positive side it works but when I snap backwards and the encoder points go on the negative side the power supply turns off, I have already tried 3 different ones with much higher Watts than the motor needs; by any chance can you help me?
Could it be the fact that I didn't put on the resistors?
Bro i have a pxn v3 pro which rotate 180° if i only add encoder and arduino leonardo in my steering wheel does it work and give 900° rotation pls answer
Yes it will work since you will be updating complete electronics.
ruclips.net/p/PL4B0LEKY-jrROPZPEDMZ4DPqISPXvVsdL
Can you please send the link for the video in which you connected the cable to the power supply unit please
How did you soldered db9 connectors please explain the circuit please 🥺
Hello, i have a question is the bts7960 motor Driver good i heard they get Fried very quick Are there any alternatives? Or only that module thank you.
I have not come across such scenarios. The drivers are working good.
Hi bro it seems my aurdino boards analog pin a0 and a1 is shorted so when i use accelerator the brake also works.what can i do about that?
Try to use B10K potentiometer which has metal knob.
hi, we connected everything as you showed, we installed emcutiliti on it, but it doesn't send any signal. (we haven't done the pedals yet, there is a problem with the steering wheel) the arduino lights up, but when we turn the rotary encoder, the program doesn't notice it, and the wheelcheck doesn't work with it either. What could be the problem?
Have you used 10k resistors for A and B phase wires?
No, I used a 4.7k resistor, but if I just connect the rotary encoder without the force feedbeck or resistors, it works.
On your steering wheel whats the positive of running a pulley setup vs direct drive from the wheel?
Get more torque and the force feedback is made to be run by 60 teeth an 20 teeth pullys
Can we add gear shifter and hand break inputs too in this Leonardo R3 Board. Can you specify about the Power supply and like how much AMP should we use or just provide a link for compatible adapter
As of now I have done video for paddle shifters and analog handbrake.
Shifter: ruclips.net/video/-gHQ2EIYm88/видео.html
Handbrake: ruclips.net/video/Y9GrUO6RuhA/видео.html
My motor is 24v, 13A. But for now using 12v, 5A power supply.
If you are buying supply, better go with variable option(At least between 12 and 24V switching option).
In some games if feedback is too strong, it is difficult to move the wheel when motor is powerful. In these scenarios you can reduce the supply.
@@techathome thank you very much bro, I did not expect to get reply from you. thanks for reply
why did you not use load cell for the break , its very simple and cheap to make .
Bro your video and explanation is so much clear❤
Please, I need to know is there a latency when you playing with this?
Thank you
I didn't face any lag,
I am new to this and also I have not used any wheels before,
So I cannot answer this in reference to standard wheels.
Hello, I had a problem with my rotary encoder that is, when I rotate it to the right, it register the value in negativ, and positive on the left side. Can you please tell what should I do
PLEASE REPLY
Interchange the A and B phase wires connected to pin 0 and 1.
bro is it possible to use canon ip2770 encoder sensor insted of 600 ppr rotry encoder if its posible how much value of cpr need to be set on encoder settings of emc utility
You can use.
Cpr = Ppr * 4
So you have to get PPR details of your encoder.
Is the EMC firmware still available? The Facebook page is not active and no one is replying to comments
Even I don't see any latest posts. But all previous posts and file links are still working.
How can I make this work in dirt rally? I couldn't do it, can you help me?
How do make the steer turn of f1 equal to steer turn from the hardware?
If steer turn in f1 is 90 degree then my steer turn should be 90 degrees as well
There is option to set the steering angle.
Watch from 16:25
Very good video, you clarified many doubts, could you show what the configuration of the buttons would be like, please?
Thank you.
This video will help you on the usage of buttons: ruclips.net/video/-gHQ2EIYm88/видео.htmlsi=BjsJxN_AZZhs_j4U
the big motor is necessary and only with the encoder. I can make one without the need for a large motor and only with the arduino leonardo excellent video👍👍👍
You can also use smaller motor. But gear/pulleys should be selected considering the required RPM at the end.
Even if you don't connect motor, steering works fine. But there will be no force/feedback.
@@techathomethank you bro even I had the same idea of using only the steering, gears, pedals and handbrake, without any ffb. But bro tell me one thing, can I use a potentiometer in place of the rotary encoder by connecting the pin of the pot to the analog input
@@tanishplaysguitar4438yeah of course, might have to change the code but should be fine. I built one without ffb following a video from a guy named Nzgamgingtech I think…. And he used a potentiometer instead. Anyways it should be fine
can i use an photoelectric rotary encoder instead of a optical one as an alternative?
If it has same number of wires, you can use.
hi, I'm also building your project, but I chose to use the stm32, but I don't know which pins I should use. Do you have any images with connections to make?
I have not explored much on stm32 based build.
I have provided EMC Facebook page link in video description. You can go through, all sources are available.
@@techathome I made everything using Arduino and a 500w 24v motor, but I burned the bts7960, could you help me?
I purchased 2 BTS to connect in parallel, do you also recommend inserting a fuse?
do you have any advice for me?
Hello dear, how are you? I wanted to ask if it is possible to use the arduino 328p u to do this construction since they sent another arduino by mistake and I cannot return the purchase once
Hello, No possible with Arduino Uno (328p)
You have to use specifically Arduino Leanardo
hey the 22 teeth 60 teeth and 15 teeth pulleys are not available can you pls tell me which pulley should i get please tell me size and also the belts because i dont have knowledge about this. the only thing i need right now are the pulleys. please reply man and btw thankyou so much for making this.
Which motor are you using?
Do i need to use the resistors thats shown in the diagram og will it work without?
Yes, you need to use resistors for encoder.
When I click on the EMC program to configure the steering wheel and pedals, it doesn't give me the option to configure, look at minute 14:35 where that box appears, it doesn't let me configure anything.
It means your Arduino Leanardo is not detected as EMC controller.
Try to flash the hex again using xloader.
Hii bro, Can I use UNO in place of Leonardo because the clock speed is same (16Mhz), the digital and analog pin number is also enough as required ?
No, It doesn't work with Uno.
Arduino Leonardo uses Atmega32u4 chip which itself has built in usb communication. So when you connect this , computer treat it as HID similar mouse, keyboard etc.
But Arduino Uno use Atmega328P and one more additional chip just to handle serial communication.
EMC utility lite is not letting me configure the pedals and the steering wheel, the max and min positions of the pedals are randomly going back and forth, and the steering angle is not increasing, please help
Same here
How could i go about making just the pedals, and have them connect to my pc directly by usb?
Yes, You can use that way.
Is there any way to add force feedback onto a prexisting non force feedback whee??
Wich Wheel Are you Talking about because Most of the wheels for example pxn v9 have potentiometers wich cant work with ffb so you would Need to Switch it with an Encoder and Insert an arduino leonardo , bts 7960 Motor Driver , Dc Motor yes its possible but not worth it better make a new base for it
Not possible to add FFB on potentiometer based wheel
Can i remove the ffb motor and the circuit board from the ffb . I just want the wheel, abc paddle, and paddle shifter . Help me out 5:34 .
Yes you can use without FFB motor and motor driver board.
But issue is,
Even if you set the wheel degree to some value(example 300 deg), since motor is not there, degree won't lock. You can still move beyond and wheel centre keep on changing.
can I use any other encoder under 500rs and what values should i enter in this software 14:50 if I am not using the ffb motor and the 600ppr encoder.
And suggest me any alternative to the 600 ppr encoder under 500rs and the value i need to enter on the software.
And what options to select in hbridge 15:10 if i don't use the ffb motor.
1. Using cheap encoder: ruclips.net/video/7c1FGc-xNLc/видео.html
2. (PPR value * 4)
3. H bridge you can keep same. Anyhow if you don't use ffb motor it doesn't matter.
Hey can some pls tell me how can I connect the motor supply and the power to the fan 6:19
In the circuit I have shown the connections for motor supply. Use B+ and B- pins.
For the FAN, you can use the same supply if its operating voltage is same as FFB motor.
Can I connect potentiometer for steering and connect with analog input a,,, is that work similarly...
No, that doesn't work with this firmware.
@@techathome ok bro.. thanks..
bro if i just want pedals alone (i will steer via keyboard) what connection do i have to do
Connection remains same, do it only for pedals.
Rest, depends on configuration inside the game.
Nice project. Mine also completed, Im using a small motor for force feedback..and using RFR software. My setup and design is mostly for Euro Truck Simulator with H Shifter Gear. My Question is, when i try to play with other games e.g Snowrunner or Dirt Rally, the game not detecting the Ardunio Controller, I found a YT video, but need to upload a different HEX file to the Ardunio. How to solve this if you know how? Thanks.
RFR was giving error for me, also wheel was rotating randomly.
So not explored much.
But for the same setup, try EMC lite.
Just you have to modify some connections.
We can see, if this firmware is detected in games mentioned.
Can you also try to flash EMC hex on to your Arduino and see if it's detected in snow runner??
Thanks for info
sir apne jo rotatry ppr rotary encoder use kiya h uske place pr potentiometer use kar skte h na
No
Potentiometers cannot be used.
thanks a lot sir @@techathome
A question for the arduino to work is the bts7960 motor necessary or can it work without the x since I already made the connections. And no button works for me?🙏👍
BTS driver is only required for motor control and feedback.
Even without that, your steering wheel should work in EMC. Is that happening?
@@techathome No EMC key works for me, I even prescribed it and converted it back to EMC and there is still no response.👍
@@techathome thank you very much for the help 🙏🙏👍
First your wheel should work
hey man have you bought emc utility pro? if yes then can you share it with me? i do not have enough budget to buy it currently and rfr config is not working correctly for me.
you cant Share it on multiple Computers… only working on one Procesor
Once license doesn't work on another computer.
Hello. Loved the video. Xloader stuck in uploading and never finished. Do you have any idea why this would happen?
You have to use genuine leonardo fake ones have different chip so software can't understand so it gets stuck
best you tuber ty bro
Welcome ❤️
Awesome Project again, I cailbrate acceleration and Brake. But when I turn one potentiometer The value of other potentiometer is also changing. What could be the reason? I tried a lot of calibration, and I couldn't solve it. Any help is appreciated
Thank you,
You can replace the potentiometer and check.
Even I was facing this issue earlier,
After using this type of potentiometer(B10k), issue resolved: www.google.com/imgres?imgurl=https%3A%2F%2Fm.media-amazon.com%2Fimages%2FI%2F61CYQGQz8HL.AC_UF1000%2C1000_QL80.jpg&tbnid=V9Se71hpLGu8OM&vet=1&imgrefurl=https%3A%2F%2Fwww.amazon.in%2FElectroBot-Linear-Taper-Rotary-Potentiometer%2Fdp%2FB07QB32TD3&docid=g6yyn0PKGfBqCM&w=927&h=1000&itg=1&hl=en-IN&source=sh%2Fx%2Fim%2F4
@@techathomeThank you Brother..Much appreciated ❤
is thiq working only on Arduino leonardo ?? o r i can use any Arduino like UNO
Only Arduino Leanardo
If motorr is alternative 100w gears will be 0.333 gear ratio 60 and 20 teeths?
I think that motor is 2500 RPM, then
Using this gear ratio, output RPM : 833
Output torque: 1.68 Nm
I used these online calculators :
Ratio RPM calculator: www.omnicalculator.com/physics/gear-ratio-rpm
Gear Torque calculator: calculator.academy/gear-torque-calculator/
These are values from my build:
Before pulleys-
Motor Rated Torque : 0.87 Nm
Motor RPM: 2650
Input pulley teeths(at motor): 15
Output pulley teeths(at steering shaft): 60
Ratio(Output / Input)- 4:1
After pulleys -
Output RPM: 662
Output torque: 3.48 NM
Great video, thanks a lot! I only have one question. Is it possible to use one arduino and driver to operate 3 axes with force feedback (3 motors)? Reason bring that I wish to create an aircraft control yoke with force feedback. Thanks a lot!
Not possible. With this there will be only one steering axis with feedback, other 4 just analog axis for pedals.
@@techathome thanks for your prompt reply! So to have 3 more axis with force feedback, you would need 3 more Arduinos as well? Thanks!
I am not sure if you can run 3 same devices together, game should also detect properly.
But why you need feedback for aircraft.
@techathome will do some tests using different arduino outputs whilst all 3 axes are connected at the same time. I need it as aircraft controls do move because of the wind, so there is feedback in the yoke/stick of an aircraft.
👍
it can work on any game? like forza horizon, asseto corsa, beam ng...
this video is really good, its really hard to find a ffb wheel tutorial in this quality!
Yes it works on all those games.
Thanks!
But on forza you might need a emulator to make it work in forza for more info go ZUDU MaLLi youtube channel
is there a way to use a potentiometer for the steering?, if you can how would you wire it.
Not possible with this software,
You can try this basic wheel from potentiometer and Arduino Uno,
ruclips.net/p/PL4B0LEKY-jrT4qVf352Es444lZY48uSvu
ruclips.net/p/PL4B0LEKY-jrTZEiCamC6Un8yo_Ea-i2FF
@@techathome oh ok thank you
Hi, are there any advantages or disadvantages to attaching the rotary encoder directly to the shaft? Is it going to affect performance and feel of the wheel in any way?
There is no difference in both cases functionality aspect.
In my case, since I have used same pulleys for encoder and shaft, the ratio is 1:1.
Which is again same as mounting directly to shaft.
Just it improves your design. But you can connect directly to shaft and reduce some cost of the build.
Got it. Thanks Bro @@techathome
Welcome
Hey man,can we also use a potentiometer instead of the encoder with some gears and use it to mesure rotation and use the same software for the calibration?Do you have any recommendations or solutions for that?
Anyway your guide is very useful and amazing.Good luck❤
You could do that by modding the wheel firmware, but just get an old inkjet printer from Brother and take the encoder wheel and sensor out of that. With potentiometer you will have a very low resolution.
Bro just buy a cheap encoder and use it it works and later you can upgrade
Do u have one with h shifter or pedal shifter as well?
We will be making both in coming days.
Next video will be on pedal shifter.
But H shifter will take time.
It works brother. But When I calibrate for One potentiometer the other ones also responding..why's that?
Even I am not sure about this issue,
Even though the potentiometers are connected to different analog pins, there might be overlapping of values from ADC buffers. Not sure exactly.
RFR wheel config don`t see my leonardo, with another software for FFB wheel this program see my device and com port, what could be, won't you tell me? Thank you in advance
Which hex file did you flash on the board?
@@techathome your file, from folder "Firmware" =)
That is the issue.
The firmware I have given is specific to EMC.
For RFR, there is different firmware. You have to flash that.
Sorry I have one next ask. If I will make with H shifter and buttons. Resistors will be also 4.8k? Or higher?
No need of resistors for button matrix,
You can refer to schematics
I am having trouble with forza horizon it keeps crashing as soon as i connect the arduino.
Any fix?please help
Is forza horizon detect this controller?
These games only detect licensed wheels. So you need to make Diy GIMX adaptor.
Is the coding the same for arduino for emc compatibility? Or its different?
Same firmware
Hello. Can u help me?) I have a question, can i use power supply on 20v and motor on 12v? Thank you in advance)
You need to check voltage specifications of your motor.
@@techathome ok, I understand
Thank you very very much)
Hi 🙋!
Can I use an Arduino Uno and an Arduino Leonardo connected at the same time on the same pc?
Thanks!
Yes, you can
Hope you can share the filw emc pro
Pro is the paid version. I don't have it as of now.
When i press brake pedal the accelerator Sensitivity also shows in emc utility and when i press accelerator pedal the sensitivity does not show any thing
Try to use B10K potentiometer which has metal knob.
you can also add a reset button and 5-6 extra buttons of your choice
ruclips.net/video/-gHQ2EIYm88/видео.htmlsi=CGujuqlUESLw0Yz7
Can you add extra buttons as well on it?
for extra functions or controllability?
This Firmware supports 16 digital button inputs.
Using the same we have made Paddle shifters, you can check out this: ruclips.net/video/-gHQ2EIYm88/видео.html
@@techathome oh cool I'll check it out thank you so much!!
This is amazing, thank you, I just have one request, can you please share the connections if I use arduino pro micro instead of leonardo
As per the EMC development forum this firmware supports only for Leonardo and STM32, Since pro micro also uses same chip as Leonardo, you can consider same pin numbers which are available.(I have not tried since i don't have board) .
Let me know if it works.
It doesn't work cause only Arduino leo board has the USB interface as i know.(BTY i dunno exactly,its just my thought)
Woah Its really awesome. But I need help. My emc is inverted when i turn the wheel to right values goes negetive, when i go left values goes positive and i see no invert option. Other than it it working
Thank you,
You have to just interchange Encoder A and B phase terminals connected on Arduino pins 0 and 1.
@@techathomeThanks again..nice work
do you face any lag in the output of steering wheel in euro truck simulator
I don't feel any lag.
But it's difficult to compare for me, since I have not used any other wheels before.
Hello can you help me??
My steering wheel can stop spining.. where is my mistake?
1. Check connections from Arduino to motor driver.
2. Check if your motor driver is defective by referring to this video: ruclips.net/video/H2YJRaaXFIM/видео.html
can't i use arduino mega 2560 pro instead of leonardo?? if so, where can I get the firmware?
No, It doesn't work.
Arduino Leonardo uses Atmega32u4 chip which itself has built in USB communication. So when you connect this , computer treat it as HID similar mouse, keyboard etc.
is it possible to use this project to play almost game racing in PC?
Yes
Hey, thanks this is the best tutorial ever! Can you tell what power supply you're using please? Can we use something recyclable ?
Thank you!!
My motor is 24v, 13A. But as of now using 12v, 5A power supply.
If you are buying supply, better go with variable option(At least between 12 and 24V switching option).
In some games if feedback is too strong, it is difficult to move the wheel when motor is powerful. In these scenarios you can reduce the supply.
@@techathome Thanks! Can I use a laptop power supply as it provides 19V for 11A ?
Which motor are you using?
Hello I can't upload the hex file to the arduino leonardo, I have a Mega32u4. Can you help?
Did you select proper chip option in xloader?
Also did you short reset and GND pin(to enable bootloader) before uploading?
it worked, thanks❤❤
Welcome
You need to add a z toggle button to fix the calibration error, rfr will work and give more options
Yea I had added z toggle, still there was issue.
May be I have missed something.
Can you give me more info on how to do that
Bro will this wheel work in any game that supports a steering wheel ? i saw a video in which someone was using a thing called gimx to make his wheel work in forza horizon 5
My Laptop is very basic, so couldn't try most of the games. Planning to upgrade in some time.
GIMX will have standard firmware which most of the games can detect.
So this acts as a link between game and DIY game controllers. Internally data mapping will happen continuously(Game GIMX DIY controller)
will you try making a gimx adapter when you get your new pc ? btw im watching your videos form past days and each video delivers very valuable knowledge thanks
Thank you so much ❤️
Even I saw Diy wheels are not detected in all the games.
So definitely we will explore that.
Hello brother, I got the project working solved potentiometer issues. But now the force feedback is not working properly. It works but not all the times. circuit is correct and no loose connection. Any help is appreciated. Also I have send a email about the queries, Kindly respond. Thank you for awesome tutorial. This was by far best FFB tutorial I have seen
Could be a faulty board or chip!
But for me force feedback works fine,
Try to solder the connections if you have used breadboard.
Hi brooo one question please answer iam getting confused how to wire to db9 connectors
That means ur IQ level is basically your DUMB it's so easy bruh
What was the cost of the aluminium pulleys?... I'm using a chain sprocket system but its not that smooth because of the chain.
This is high quality material, So costed me 2.9k for pulleys and belts. I didn't find any other options, so bought them.
@@techathomethanks, I can't find them in my city.
I bought from local shop in Bangalore.
Also can you share some videos of your steering wheel, just wanted to see how chain+sprocket system works.
did you just connect the Leonardo to the computer via usb?
Yes
good video I ask you, can I also connect the gearbox to this arduino and how to configure it?
Thank you
In the schematics, there is button matrix and it supports upto 16 digital buttons.
These can be used for shifter.
Tomorrow I will upload video on paddle shifters, in that I have shown this.
@@techathome OK, thanks a lot👍👍
Can we use ac motor like one in sewing machine? Just asking
No
Bro can we connect gear shifter and handbrake to it...pls reply
Yes you can connect.
Handbrake is there is pedals tab.
For shifter, you can refer to button matrix in the schematics.
All these things will be making videos, but it will take time.
@@techathome thanks