No issues at all, beside idle being 100-200 rpm more. It's been a couple of months now since install, and I actually havn't had any problems. This is just my experience
I got a 3.7 manifold with throttle body for $87 at a junkyard off a 12 TL sh-awd pretty good price, even though it’s in tuned when it gets hot can’t notice much of a difference but when it’s cold out definitely pulls Harder and better throttle response too.
it's an upgrade nonetheless, even if you dont feel the performance. car may run more efficiently also, better gas mileage with a tune. Also, if you have a typeS (3.5L) it would be less noticeable
Good video. Nice and thorough instructions. For that connector on the throttle body, it looks like the the sensors are similar enough that you could have just pulled the sensor from your old throttle body and installed it onto the new one. That way it would connect to your harness connector without any shaving. The way you did it can work, but sometimes Honda swaps pins around in the connector between generations and causes a MIL. Glad you got it worked out.
I love my 2005 6MT. I know what you mean about small differences being felt in these things. difference between a full and empty tank of gas is quite noticeable. i need to get the 3.7 manifold and throttle body for mine now 🤩
If u were on acurazine, you would see that this was a popular mod many years ago. And the problems that thecarfiend had, were already known for only the 6mt, the autos don’t have idle issues. I installed both on my 6mt type s and had idle issues. Fixed 95% of the issue by swapping the motor and throttle position sensor from a 8th gen v6 accord j35 throttle body into the 3.7 zdx throttle body. All this information is available if u dig deep enough. Fixed 100% of the idling issue after hondata. Hondata may or may not fix the issue 100% without having to replace swap throttle body parts
Did you ever get a tune? Thinking about it ive wondered how your air/fuel ratios have been mapped considering you just stuck on a lot more air on a vehicle that was tuned from the dealership. But for a swap like this id definitely take it to a tuner shop.
Very nice indeed, I always thought that the 4th-Gen TL had the prettiest engine bay out of all Honda/Acura products. I just love how the J-series V6 engine looks in general. But Acura took it a step forward when they developed the 4th-Gen TL. They just really wanted to make the engine the centerpiece if someone opened the hood & took a look. Kind of reminds me of how Apple develop their products… open one up & you’ll see what I mean.
Bro... you gotta do something about those idle hands lol. Put them down every once in a while! Reminds me of Will Farrell in Talladega Nights. "I'm not sure what to do with my hands. " All jokes aside, great video. Lots of info and tips. Makes me want to get started on my 3.2 swap for a 3.5.
Funny because people always make comments about my hands in my early videos. So I actually do it on purpose now to troll you guys LOL =] I appreciate the support tho
Keep up the good work. I like how you explained the pros n cons. I daily my TL also and it's my cruiser. With gas prices the way they are, I'm keeping my TL stock. Still love her tho!
Car looks sick. I recommend EGR valve delete to go with the manifold. Deleting the egr smoothed out the rev hang and high idle issues for me, but I have an automatic 😢 so results may vary.
I put on an Acura 3.5 intake manifold and 3.7 throttle body on my 2003 Honda Accord V6 coupe. You should add on a P2R spacer, port/polished runners and high-flow cats. I just added those 2 things
Awesome man, that's a great upgrade for the Accord too. Full bolt on and a tune is my goal for the TL. In due time, I'm in no hurry and mod at my own pace
I’ve heard the P2R spacer doesn’t do anything tho coming from the manufacturer but if there’s a gain lmk but high flow cats are definitely worth it tho
Great build & honest review. How are the thermal gaskets working for you? I've heard of them having vacuum leak issues over time. Also, have you had additional issues since you did the swap? I have an '05 TL-base Aspec w/ P&P IM/Runners. Been considering this build for awhile with my setup. Any feedback would be appreciated, keep up the great content! 💯
Much appreciated. I tried to document as many cons as possible in that video. So far, so good. it's been a couple of months since install, and i drive the car daily. No issues, other than 1-2 loss in MPGs. No idle issues, no vacuum leaks, nothing. But this is just my experience. If I did have issues, I would most likely swap back to the stock 3.2 IM. since winter is around the corner and I try to avoid working on the car in the snow lol. So definitely keep your stock setup when doing this mod, in case you run into issues
Edit: was your TL always manual? Your shifter box looks different than my 6mt. Anyways awesome build. Loving that even after a decade people are still modifying their 3rd gen TL's. Do you plan on supercharging your TL? I wish comptech still made that supercharger for the J32A3 I swear I should open a shop for fixing Acura TL's dashboards. Ive wrapped mine in a two tone alcantara. The only pain was grinding down the cracked areas after filling them. But having taking out my 06 dashboard multiple times I feel like a pro lol. I wish Acura had put more money in a better material dashboard.
Just passed up a white '08 TL-S manual. One of the smaller reasons i skipped it was no performance mods. This vid just came up on my FY page. Your car looks good and sounds great. Keep modding. 👌 Also, whats your MPG??? (before/after)
Much appreciated. And yeah, there's not much aftermarket support for these J-series TL's. But you'll be able to mod them nonetheless, with some creativity and skills
Great Job always have had a sweet spot for the 04-07 TL I had an 03 Maxima 6 speed manuel And my friend had a white 04 Tl we use to race all the time But yeah my manuel always got his Auto we always wondered How much better the manuel MT would compare to manuel 03 Maxi 😆 loved both cars - Mine was dark blue with black leather interior miss that car but now I drive a ISF thats been super reliable thanks for the video
Thanks for sharing. That sounds like an awesome race, both has close specs. Manuals are always more fun, imo. ISF is a great, reliable, and pretty fast car (Father-in-law has a Fsport RX350, super reliable and fast for what it is).
the 6MT has different gear ratios so it does pull harder for longer in each gear. also fourth gear is way better than on the auto. (based on the videos i've seen) 4th gear still weak though compared to the newer 8 speed 2.0T's. I watched a video where a nice 3.7 SH awd 2011 i think went up against a 2.0T accord, 2021, and a 2021 TLX 3.5 SH Awd. The old 2011 pulled them until fourth gear.
Hey man, thanks for the detailed installation of the 3.7 manifold. I do have a question about the connector for the butterfly valve. Was it just a straight plug-in or were there any modifications done to it to plug-in?
@@thecarfiend11 oh yes, I saw that. I was asking more about the butterfly valve connection that sits on the intake cover instead of the upper manifold.
I have a scan tool that I used, along with a video I followed for the idle relearn. Scan Tool: amzn.to/3rXdKPn Idle Relearn: ruclips.net/video/Of_llbYNwww/видео.html If you don't have a good enough scan tool, you can always bring to a shop or dealer to get your idle relearned. Car was driveable after the install, without the relearn (for my case)
I’m surprised you needed the purge solenoid mounting bracket kit, cause I think HeelToe Auto only lists it as a necessary part for the J37 intake manifold and throttle body swap, onto the 9th gen (13-17) Honda Accord V6 (J35YX).
When I did mine I used my plyers I gripped the hoses and twisted them side to side and they broke loose for others that’s don’t have a picc or scared to poke holes
@@kevink6265 The internal diameter of the intake manifold port to the throttle body must match the internal diameter of the throttle body , else if you just use an adapter it will constrain the airflow with zero net gains.
Usually connectors can be disassembled and repinned. Could look into buying the 3.7 connector for that sensor (or finding one at a salvage yard for free) then replacing it on your harness. Not sure though I'm new to this. Believe it or not I'm thinking about doing this to my 1st gen Pilot lol.
Yes, they can be repinned to the correct connector. But since both connectors are very similar, and I do not have the correct one, a simple 5 minute job did the trick
Who ever you got that trottle body from probably moved the butterfly valve and alter the valve causing the idle to fluctuate therefore you have to do an idle re-learn. Nothing wrong with the 3.7 TB. I also feel like the oem metal gasket for the runners are better and the paper TB gasket is better I never had any idle or vacuum issues doing this mod
Not sure, as I did not do any dyno before and after. Should add 5-10 Hp, in theory. Also could be even more if you add complimenting mods, like a cold air intake and intake runners
how are you bro, your acura is very beautiful, sorry I would like to make that modification to my 2007 Acura Type S, apart from just changing the manifold, did you have to do any reprogramming? Or is it just changing the manifold and throttle body? Greetings.
@sebestiensoliz8831 I have a 2006 Acura MDX 3.5L. Can I swap out the Intake Manifold for a 2008 Honda Odyssey from a Mini van 3.7 Intake Manifold? And, do I have to cahnge the TB or can I use my stock TB?
I remember the guys on Acurazine having issues and hiccups like throttle hang and what not when doing the 3.7L mani and TB. Have these issues been solved yet?
I got mine's off RockAuto.com. It's OEM refurbished. You have to know which car the Intake manifold came from, so you can get the right one (they are generally the same with the 3.2, 3.5, 3.7 but sizing may be different)
Where you got that rubber piece to install the sensor that it's on the 3.2 but not in the 3.7. I got everything except that rubber. By the way great job in the painting. Thanks
That's too broad of a question. I don't know much about engine swaps. But I do know.. if you got the money, time and skills, you can swap any motor into any chassis. If you're talking the 3rd gen TL's, then you can't really swap other motors without some modifications. A 3.7 motor from a newer Acura will fit into the 3rd gen engine bay, but modifications will need to be made. It's never an easy/direct swap. Knowledge is power (quite literally)
If you can find a cheap 3.7 Intake Manifold and throttle body, This is DEFINITELY A GOOD BANG FOR BUCK PERFORMANCE MOD. Enjoy!!
Hello I been look for that Silicone coupler with the hole for the IAT sensor can you like me know where you got it from??
its a couple from P2R. Here's a link..
ebay.us/iHiCYw
Do you get idle issues after install
No issues at all, beside idle being 100-200 rpm more. It's been a couple of months now since install, and I actually havn't had any problems. This is just my experience
How much was that manifold cover and where did you buy it?
I got a 3.7 manifold with throttle body for $87 at a junkyard off a 12 TL sh-awd pretty good price, even though it’s in tuned when it gets hot can’t notice much of a difference but when it’s cold out definitely pulls Harder and better throttle response too.
it's an upgrade nonetheless, even if you dont feel the performance. car may run more efficiently also, better gas mileage with a tune. Also, if you have a typeS (3.5L) it would be less noticeable
Should I get this for my Acura tl type s 07
@@C6Elvy Yes
Good video. Nice and thorough instructions. For that connector on the throttle body, it looks like the the sensors are similar enough that you could have just pulled the sensor from your old throttle body and installed it onto the new one. That way it would connect to your harness connector without any shaving. The way you did it can work, but sometimes Honda swaps pins around in the connector between generations and causes a MIL. Glad you got it worked out.
I love my 2005 6MT. I know what you mean about small differences being felt in these things. difference between a full and empty tank of gas is quite noticeable. i need to get the 3.7 manifold and throttle body for mine now 🤩
Lmk how it goes, I have 05 6mt too and am interested
Love the build it’s something different that a lot of people don’t do. You should dyno it and get it tuned eventually.
Thanks man, I appreciate it. Definitely wanna tune and dyno. It's in the plans
If u were on acurazine, you would see that this was a popular mod many years ago. And the problems that thecarfiend had, were already known for only the 6mt, the autos don’t have idle issues. I installed both on my 6mt type s and had idle issues. Fixed 95% of the issue by swapping the motor and throttle position sensor from a 8th gen v6 accord j35 throttle body into the 3.7 zdx throttle body. All this information is available if u dig deep enough. Fixed 100% of the idling issue after hondata. Hondata may or may not fix the issue 100% without having to replace swap throttle body parts
Did you ever get a tune? Thinking about it ive wondered how your air/fuel ratios have been mapped considering you just stuck on a lot more air on a vehicle that was tuned from the dealership. But for a swap like this id definitely take it to a tuner shop.
Always passing on knowledge. Thank you for all you do. Your appreciated.
Much appreciated 🙏
Great vid. Thanks for letting us know about the negative side of the mods. Too often we only hear about the positive.
Thank you. I like to disclose the positives and negatives. It's not all fun and games sometimes
dang, that's one of the nicest crafted intake manifolds I've ever seen. Everything is made out of plastic nowadays.
Always a treat when yo vids pop up.
Thanks man, much appreciated 🙏
Very nice indeed, I always thought that the 4th-Gen TL had the prettiest engine bay out of all Honda/Acura products. I just love how the J-series V6 engine looks in general.
But Acura took it a step forward when they developed the 4th-Gen TL. They just really wanted to make the engine the centerpiece if someone opened the hood & took a look. Kind of reminds me of how Apple develop their products… open one up & you’ll see what I mean.
I’ll take the compliment because their is no denying that the 3rd gen and especially the type s look way better than my 4th gen TL 6MT
J35 enters the chat
You realize this is the third gen right?
@@iamatlantis1 yes I do, I was comparing all the J-series V6 engine bays
Bro... you gotta do something about those idle hands lol. Put them down every once in a while! Reminds me of Will Farrell in Talladega Nights. "I'm not sure what to do with my hands. " All jokes aside, great video. Lots of info and tips. Makes me want to get started on my 3.2 swap for a 3.5.
Funny because people always make comments about my hands in my early videos. So I actually do it on purpose now to troll you guys LOL =] I appreciate the support tho
Keep up the good work. I like how you explained the pros n cons. I daily my TL also and it's my cruiser. With gas prices the way they are, I'm keeping my TL stock. Still love her tho!
Car looks sick. I recommend EGR valve delete to go with the manifold.
Deleting the egr smoothed out the rev hang and high idle issues for me, but I have an automatic 😢 so results may vary.
Thanks man, much appreciated. Will eventually delete EGR, more performance mods, stand alone ecu, and tune. that's the plan, slowly but surely
this will throw a CEL that you can't get rid of.. for only 2hp
@@kitvexed8229explain?
Where did you get your coupler at for the sensor?
It's off the 4th gen Acura TL, 3.7L. I'm pretty sure HeelToeAuto.com or Endlessrpm.com has them
I put on an Acura 3.5 intake manifold and 3.7 throttle body on my 2003 Honda Accord V6 coupe. You should add on a P2R spacer, port/polished runners and high-flow cats. I just added those 2 things
Awesome man, that's a great upgrade for the Accord too. Full bolt on and a tune is my goal for the TL. In due time, I'm in no hurry and mod at my own pace
Why did you decide to do the 3.5 intake and not the 3.7? What’s the difference?
I’ve heard the P2R spacer doesn’t do anything tho coming from the manufacturer but if there’s a gain lmk but high flow cats are definitely worth it tho
Great build & honest review. How are the thermal gaskets working for you? I've heard of them having vacuum leak issues over time. Also, have you had additional issues since you did the swap?
I have an '05 TL-base Aspec w/ P&P IM/Runners. Been considering this build for awhile with my setup. Any feedback would be appreciated, keep up the great content! 💯
Much appreciated. I tried to document as many cons as possible in that video. So far, so good. it's been a couple of months since install, and i drive the car daily. No issues, other than 1-2 loss in MPGs. No idle issues, no vacuum leaks, nothing. But this is just my experience. If I did have issues, I would most likely swap back to the stock 3.2 IM. since winter is around the corner and I try to avoid working on the car in the snow lol. So definitely keep your stock setup when doing this mod, in case you run into issues
Edit: was your TL always manual? Your shifter box looks different than my 6mt. Anyways awesome build. Loving that even after a decade people are still modifying their 3rd gen TL's. Do you plan on supercharging your TL? I wish comptech still made that supercharger for the J32A3
I swear I should open a shop for fixing Acura TL's dashboards. Ive wrapped mine in a two tone alcantara. The only pain was grinding down the cracked areas after filling them. But having taking out my 06 dashboard multiple times I feel like a pro lol. I wish Acura had put more money in a better material dashboard.
Just passed up a white '08 TL-S manual. One of the smaller reasons i skipped it was no performance mods. This vid just came up on my FY page. Your car looks good and sounds great. Keep modding. 👌
Also, whats your MPG??? (before/after)
Much appreciated. And yeah, there's not much aftermarket support for these J-series TL's. But you'll be able to mod them nonetheless, with some creativity and skills
Great Job always have had a sweet spot for the 04-07 TL I had an 03 Maxima 6 speed manuel And my friend had a white 04 Tl we use to race all the time But yeah my manuel always got his Auto we always wondered How much better the manuel MT would compare to manuel 03 Maxi 😆 loved both cars - Mine was dark blue with black leather interior miss that car but now I drive a ISF thats been super reliable thanks for the video
Thanks for sharing. That sounds like an awesome race, both has close specs. Manuals are always more fun, imo. ISF is a great, reliable, and pretty fast car (Father-in-law has a Fsport RX350, super reliable and fast for what it is).
the 6MT has different gear ratios so it does pull harder for longer in each gear. also fourth gear is way better than on the auto. (based on the videos i've seen) 4th gear still weak though compared to the newer 8 speed 2.0T's. I watched a video where a nice 3.7 SH awd 2011 i think went up against a 2.0T accord, 2021, and a 2021 TLX 3.5 SH Awd. The old 2011 pulled them until fourth gear.
I think you meant "manual." I won't make the old joke about the guy named "Manuel." Happy driving.
You need to switch the MAP sensor and use your old one. just FYI
Hell yeah bro it looks awesome!!
El acura sh awd lleva la garganta de 80 mm?
You gon love it when you get that tune
For sure man. I'm waiting until I get ALL my performance parts in. Then I'll get a aftermarket ECU and tune
What is that little sleeve you have for the sensor? Where dis you get it?
Nice work bro!🤌🏼
Looks good! I have an 02 TLS that I swapped the j35 into I wanna do this intake swap next.
Totally worth it if you can find it cheap
Thanks for sharing. Got myself a 3.7 from the yard. Im wondering if the MAP sensor on 3.2 fit tje 3.7.
SHOULD I GET FOR MY 08 3rd GEN ??
I've been trying to figure out if you need to get the injectors off the same car
what are you usually supposed to do with the connector that you didn’t plug in drill a hole ? for the connector or what
Hey man, thanks for the detailed installation of the 3.7 manifold. I do have a question about the connector for the butterfly valve. Was it just a straight plug-in or were there any modifications done to it to plug-in?
Thank you, thank you. It was not a straight plug in. You have to shave it slightly, so it can slip on. I briefly explained it in the video
@@thecarfiend11 oh yes, I saw that. I was asking more about the butterfly valve connection that sits on the intake cover instead of the upper manifold.
Are you talking about the IAT sensor?
@@thecarfiend11 no I’m talking about the butterfly valve that sits in the upper intake to open or close depending on how much throttle is given.
3.7 intake on my 3.5L, only big difference is the noise and a bit more harder pull especially with a tune
How much was the difference before the tune?
Hey man, I just bid n won a 3.7L manifold with throttle body for $220 total is that a steal!!! can't wait to get it onto my 08 TLS auto.
Great video, thanks. Where did you get the re-manufactured Intake Manifold? I have a 2006 MDX 3.5L. Which Manifold would you recommend?
I bough mines off ebay
Hi place to oder the adapter boot for intake hose
New TL owner here when you got the 3.7 did you have to change the runners are does the stock runners from the 3.2 fit the 3.7 intake manifold
You can change runners, but I did not. Other owners usually get bored out runners from P2R
Did you install the IT sensor to silicone coupler?
yup! Didnt want the hassle of drilling or getting a new intake, etc. a bit costly, but made install super easy
Buenas disculpa si hay diferencia del tamaño del intake del 3.7 y el 3.2 o solo la garganta es mas grande?
Tambien el intake es mas grande y mas liviano
Can you send me the info where you got your Air Intake System. The eBay link you posted is no longer.
Heyyyy, I know that battery hold down and that guy. Used to live in the same area. Good video though!
Yeah, Jonah is an awesome guy. He's been doing some stuff for the TL community and has his own youtube channel also
Did you reuse the gaskets ?
What did you do to do the Brembo swap?? I want to do that to mine too
3G TL's with a manual transmission came standard with Brembo calipers in the front
Are the bolts on the inside of the intake manifold gasket 10mm as well ?
yes. I reused all the bolt
How did the bolt patterns Match up? Did you have to do any bolt hole relocation? I’m afraid that it won’t fit when I do mine
It's a direct bolt on (besides relocating the IAT sensor)
Great paint job!!
Hey where did you get that coupler from? For the IAT
ebay lol. But the company that makes is P2R. its for a 4th gen TL
An MDX has J37 with the J35 intake manifold right? You need a J37A4 or A5 (TL SH-AWD or ZDX) to get the bigger intake manifold
@thecarfriend where can I find that coupling ? Thanks
Coupler is from a 4th gen TL. P2R 3.7 intake coupler
Where did you get that cuppler for the sensor?
P2R 3.7 intake coupler from a 4th gen TL
Love the car, where did you get the coupler?
Bought off eBay. P2R 3.7 intake silicone coupler
How did you go about the idle relearn?
I used my Bluetooth OBD2 device, and looked up a video haha
Very good documentation on this topic. I've been considering this upgrade for a while. What exactly did you do to the car for the idle relearn?
I have a scan tool that I used, along with a video I followed for the idle relearn.
Scan Tool: amzn.to/3rXdKPn
Idle Relearn: ruclips.net/video/Of_llbYNwww/видео.html
If you don't have a good enough scan tool, you can always bring to a shop or dealer to get your idle relearned. Car was driveable after the install, without the relearn (for my case)
Would this setup would work on honda accord 2005 v6? Currently on J30A4
honestly not sure. i know it would work on a j32/j35
What if you already have a 3.7
Don't use the thermal gasket. They warp with heat and then you get a vacuum leak, I only use OEM gaskets on my boosted motor
I’m surprised you needed the purge solenoid mounting bracket kit, cause I think HeelToe Auto only lists it as a necessary part for the J37 intake manifold and throttle body swap, onto the 9th gen (13-17) Honda Accord V6 (J35YX).
Are you saying I can install a 3.7 Intake Manifold onto a 2006 Acura MDX 3.5L?
Would this work on the 07 auto base
Yup. Should work with any 3rd gen TL
Kinda wish my type S was a 6spd now
I know somebody with a base 6mt and another person with the type s auto.
I'll take the base all day.
would this set up apply for a 2008 base TL 3.2
Yup. Should be the same
When I did mine I used my plyers I gripped the hoses and twisted them side to side and they broke loose for others that’s don’t have a picc or scared to poke holes
Hey bro I was thinking bout getting a cai do you drive your car in the rain?
Yup. I daily my car. Sun, rain, snow. I have the KnN Typhoon
@@thecarfiend11 you not scared for hydro locking?
I'm always scared for hydro locking lol. But I usually know where the big water puddles are. I havn't had any issues, because I'm super careful
Excuse me bro, Can I use intake manifold and throttle body from an acura TL SH AWD 2010?
Hey can you share a new link for the coupler please
P2R Silicon intake tube for the 3.7 TL..
ebay.us/6MjkB1
What did u use to secure it to silicone? Super glue?
What silicon and where? I don't think I used silicon anywhere
@@thecarfiend11sry I meant the silicone coupler, how does the sensor stay in place?
I don't have anything holding it in place. It's been super tight, no clamp or zip tie needed yet
🫱🫲😂. Good video bro. Drive safe.
Nice car! What wheel setup w/offset you running? Looking to get some new rims.
Thank you. My wheels are (knock-offs of Work CR Kai's) Vors TR4, Fronts: 18x8.5 +30, Rears: 18x9.5 +30. Needed spacers in the front to clear brembos
@@thecarfiend11 I was thinking 18x9.5 with +35 which I think puts about even with fender with a 225/235 tire. Thanks for the info!
Wouldn't it be easier to get a bigger throttle body, than to change the whole intake? Am i missing something?
My thoughts exactly, the two intakes looked identical in size, except the larger TB, if that's the case get the TB and an adapter?
no the j32 and 35 have a inlet ID: 67mm Outlet ID: 65mm where as the j37 has 80mm inlet and 70mm outlet. @@kevink6265
@@kevink6265 The internal diameter of the intake manifold port to the throttle body must match the internal diameter of the throttle body , else if you just use an adapter it will constrain the airflow with zero net gains.
What the name of that hose at 3:39?
Will it pass the smog test, after its been modified like this?
Yeah, it should pass. It's not messing with exhaust or anything like that
Did you use the j37 map sensor you need to dont use the j32 map sensor
Used J37 map sensor
I have a 2007 acura tl type s would you recommend this
Only if you can find it cheap, honestly. You'll feel less of a difference in the TypeS, since its the 3.5L setup though
Does it have to be from the 2011 mdx or can it come from the previous years too
Basically any Acura (of the same vintage) that has the j37 motor
Where can i find the coupler im doing the swap as well
I used this one here from P2R..
ebay.us/ZvJWd9
7:29 name of the coupler ? Link doesn’t work anymore
coupler is off a 3.7 Acura TL (4th gen). Made by P2R. should find it on ebay and available off their site
@@thecarfiend11 appreciate it
@@thecarfiend11also one more question. Can I re use the hardware from the stock manifold to bolt it down ? Or do I need it from the donor car ?
I used the same hardware that bolts down the manifold
Need your old sensor from the old throttle body
What the manual transmission are you running?
Stock manual transmission
What cylinder heads from the Acura line that are compatible with my J35z2 2010 coupe V6 any info or suggestions are greatly appreciated
Usually connectors can be disassembled and repinned. Could look into buying the 3.7 connector for that sensor (or finding one at a salvage yard for free) then replacing it on your harness. Not sure though I'm new to this. Believe it or not I'm thinking about doing this to my 1st gen Pilot lol.
Yes, they can be repinned to the correct connector. But since both connectors are very similar, and I do not have the correct one, a simple 5 minute job did the trick
@@thecarfiend11 how did you do the job? did you shave the outside of the female connector?
how did you shave down the connector at the very end?
I literally shaved it with a blade lol. You can whip out the dremel, but found it unnecesary. only took a couple of minutes
@@thecarfiend11 for sure. Im going to try this on my 05
I mean if you take the intake off of 37 do you have to take the injectors as well and get the car tuned for that...?
Did u found out?
Who ever you got that trottle body from probably moved the butterfly valve and alter the valve causing the idle to fluctuate therefore you have to do an idle re-learn. Nothing wrong with the 3.7 TB. I also feel like the oem metal gasket for the runners are better and the paper TB gasket is better I never had any idle or vacuum issues doing this mod
How much horsepower does this add to the base 3.2tl?
Not sure, as I did not do any dyno before and after. Should add 5-10 Hp, in theory. Also could be even more if you add complimenting mods, like a cold air intake and intake runners
how are you bro, your acura is very beautiful, sorry I would like to make that modification to my 2007 Acura Type S, apart from just changing the manifold, did you have to do any reprogramming? Or is it just changing the manifold and throttle body? Greetings.
Can I do this with the TLX-V6 also
I'm not 100% sure. You would have to do your own research for your specific model
@sebestiensoliz8831
I have a 2006 Acura MDX 3.5L. Can I swap out the Intake Manifold for a 2008 Honda Odyssey from a Mini van 3.7 Intake Manifold? And, do I have to cahnge the TB or can I use my stock TB?
Would the 3.7 manifold fit on a 04 tl?
It's the same motor. Yes
What’s the size of the coupler ?
No idea. I didn't really measure it. But I just bought a compatible 3.7 TL intake coupler and that worked out
Do I need to do anything to my car before making this mod? I could just virtually plug and play with some issues that come with connections or hoses
it is basically plug and play, no prerequisites required. Some people have no issues, some have issues after install.
I remember the guys on Acurazine having issues and hiccups like throttle hang and what not when doing the 3.7L mani and TB. Have these issues been solved yet?
Yes, I have that issue, but it's not that noticeable. It really only goes away with a tune, from what I heard
@@thecarfiend11 I had throttle hang before my car was tuned. Drove me nuts. Let me know if a tune fixes those issues, it didn’t years ago. Good luck.
You need a foxwell scanner and do a tps relearn. @@sports_car_enthusiast
Bro, put your hands down lol
Other that that good video 👌
What car is the IM from
I have the 3.0 accord will this 3.7 Intake work on it. I'm new to the honda Acura world. As far as cars go.
Not sure, you're gonna have to do your own research. If it's a J-series, it should work
Hey brother I know a stick 3.2l has like 260hp how much hp would you say this mod added?
I didn't Dyno it, so i don't have actual results. It's estimated 5-10+ added HP/TQ. Helps when you have complimentary mods also
I was install a throttle from Mazda rx8 to manifold from j35a8. :)
Where can I find this throttle body or a good one compared to the stock one on a 2005 Acura tl …links don’t work anymore …thanks for helping❤
I got mine's off RockAuto.com. It's OEM refurbished. You have to know which car the Intake manifold came from, so you can get the right one (they are generally the same with the 3.2, 3.5, 3.7 but sizing may be different)
@@thecarfiend11 I see you went with the one from the rdx or was that the intake manifold?
My I.M. was from a 2011 MDX 3.7L (i believe). So I ordered the throttle body for that car, not the one for MY car.
Where you got that rubber piece to install the sensor that it's on the 3.2 but not in the 3.7. I got everything except that rubber.
By the way great job in the painting.
Thanks
Its an intake tube for the 3.7L TL. Search up..
P2R Silicone Intake Tube Acura TLX V6 & 09-14 TL SH-AWD
So if I wanna do a engine swap what would be the best?
That's too broad of a question. I don't know much about engine swaps. But I do know.. if you got the money, time and skills, you can swap any motor into any chassis. If you're talking the 3rd gen TL's, then you can't really swap other motors without some modifications. A 3.7 motor from a newer Acura will fit into the 3rd gen engine bay, but modifications will need to be made. It's never an easy/direct swap. Knowledge is power (quite literally)
Can I do this to my 05 RL??
You would have to do your own research, but I do believe you can do this swap
only thing i hate of this is you lose the cool 3.2 VTEC cover
I'll slap on a decal/vinyl 👍