TD25C Clearing Trees for Hay and Pasture
HTML-код
- Опубликовано: 29 сен 2020
- In this video we get the new start switch installed and clear some trees and make a water way with the International TD25C dozer. I service the cultipacker to get ready for planting. One step closer to getting some seed in the ground. Thanks for joining.
Give @franklincountyforage a like on Facebook.
Comment with any questions.
As always thanks for watching. Развлечения
Boys it sounds to me that the old girl has dropped a cylinder or two. Probably why she is smoking so much… not the turbo. Good luck. Thanks for the video. Love to see the old machines working.
these were always a smokey old beast
That machine really rolls the coal... Gretta would be upset with you! lol
Damn the old TD25 that's a beautiful machine with the smoke coming from that Old smokestack love it 🤙
Thanks. They are great machines
I ran a TD25 in the early 90's. That beast would push 35 tons of shot rock to grade in one pass. Leaked a lot at the blade valve but it was a great machine.
We can hear it whistling too! Sounds awesome 👌
Sweet thanks
There’s something really cool about watching a bulldozer at work, gets me every time, great video mate
Thumbs up. Man and his machines. Steel beast imposing its will upon the earth! Much fuel was consumed making this video. An animal or two had to relocate. This should be mandatory watching as part of a snowflake re-education program.
Used similar model over 30 years ago great dozers .that one is over feuled or a sick valve or injector it's doing it harm .but hay very impressing
I spent darn near 23 yrs on those 20's & 25's, seriesB,C,E & G's dozers as well as scraper tractors,with cable control not hydraulic for the scrapers..Actually have about 14 of the 20's & 25's in the yard still..Fine older tractors!! The newer equipment is nice for creature comforts,but,when electronics start going out,the older mechanical equipment just keeps going lol..
Very nice dozer
That exhaust pipe makes a hell of a cigarette lighter. Nice job. Old is Gold.
That is one badass dozer. Love all that black smoke coming out as them trees are being pushed over. Dang near made me cream my jeans haha. Smokes more than my 7.3.
Thanks
Thanks for keeping Harvester history alive!Just subscribed!
Wonderful power and that engine 👏
Thats a super clean machine . Nice job .
Thanks for keeping the IH history alive,just subscribed to follow the story of this old girl!
beautiful sound😯
What a beast! Pint of diesel goes up the stack every time he throttles up, blowing coal.....
Thanks it’s done well
Cool video thanks for posting one of your dozer
That flame from the stack was awesome 👍
HI FROM THAILAND 🇹🇭🇹🇭🙏🙏🥰🥰 GOOD VIDEO
So cool to see this girl come to life and still be able to work.
Love watching dozer at work
Lovely old machine
Very healthy machine. Well done.
Love to see this vintage Beauties working 💪🔥
Thank you so much for your vid. This is what I was looking for.
Operating something like that gives a feeling of power like nothing else can.
Beautiful machine
Subscribed. Awesome video love the old dozer. need watch time also.
Thats one mean machine! 😮💪🏻
Id just love to have a TD9 🙄maybe one day 😌
These gave the Cat D8H,s a run for the money.
fuel pump and injectors might be a good idea and reset valve clearences
Maybe service the Turbocharger before it does any damage, I had a td 25 b for thirty five years on the farm and I know what they suffer from ,learned through Experience.
Stay safe
Good looking bulldozer
Seen the Racoon at 16:30 under the blade running ! lol
super
These are one of the good & great dozer brands. International(IHC) together with terex, allis charmers and fiat allis .
@@thebalerman the worse is fiat allis/allis charmers. I think they totally disappeared.
@@thebalerman Komatsu bought out Dresser so they could use those modular final drives on their own crawler dozers. Because they were a better design. Then they sold Dresser to the Polish government. We bought a new TD 15E Dresser in 1999, and the serial # tag said- Made in Poland.
Fiat Allis is Allis Chalmers
Yes you are correct
Good 👍
hi from pope county
Nice machine, however, it sounded like it was only running on 5 cylinders. An exhaust valve may be too tight, or possibly burnt. Beast of a machine. I love the old iron.
Sounds like a very sick engine and it's over fuelling badly should blow smoke like that operated TD25s for some time myself they went a very reliable machine good while they were going but too much downtime
The numbers are in. In the United States, which contains 8 percent of the world's forests, there are more trees than there were 100 years ago. According to the Food and Agriculture Organization (FAO), "Forest growth nationally has exceeded harvest since the 1940s.
Interesting info
Sounds like you got a burned valve although machine runs great.
I thought the same.
That dozer needs a tune UP !
He's paying for half the horsepower and double the fuel.
@@PatrickKQ4HBD You aren't lying. Makes me sick to listen to it.
I've been around a lot of old and new they'll dozer sounds good but it still sounds like it's got a Miss to me I'm on the way down a couple td25c and they was ancient
Good living...
you should rebulid that great dozer
Yea, that engine needs a little more work than just unsticking the turbo. Nice dozer though!!
killer machine 😂
That ol girl sounds good. Does it have a slight miss or is that normal? Be ruff runnin that all day in summer!!!!. Did u just push trees in woods ?
Nice machine but man she’s hot, probably time for the injectors to be rebuilt. Not to expensive about 300 bucks if you remove them and ship them off. Much cheaper than pistons and a overhaul
Seems as though that dozer had little problems pushing over trees. I’ve seen other videos where other machines had difficulty pushing over similar sized trees. This dozer seems like a real breast.
This dozer is a beast. I know there’s a ton of comments saying it’s about to blow but she’s strong. I think it has some valve issues. I haven’t tied into it yet but hope to before I use it next. She’s old but can push a lot of dirt and some good size trees and make quick work of it. For reference this dozer is a little larger than a D8 cat of the same vintage.
the vehicle is still good, unfortunately the sound is noisy
Sounds like an exhaust leak, other than that it seems to have some nuts!!
Nice video of a great old dozer and good to see it doing some work, but I think I might be hearing a leaking exhaust valve there. I don't mean to criticize, but it might be worth checking, just in case.
@@thebalerman Nice one, best to catch anything wrong sooner rather than later and keep the old girl going!
We had an older TD-25 that tended to overheat and cracked one of the heads 😩
Yeah I’m going to be checking it out before I run it again. I did check it with a temp gun and all barrels were the same temp at exhaust, I thought I’d find one out of wack but didn’t.
Yikes that sucks. This one runs pretty good and not low on power, I’m thinking the sound has to be a valve or something. I know a lot of people are saying it’s about to blow and bad whatever but it sounds worse than it is. I put a new exhaust manifold on it because it was busted when I got it.
Smokey dozer wins again 👍
What's the sound exhaust leak or sticky valve
Nice old beast . I have an old D-6 hand clutch n it pushes mother Earth really good . LOL What price range does a TD-25 have like u running ?
15 ton at 200 dollars a ton, is the bottom line..
Sorry I hadn’t seen your message. I’d say a decent running machine would be 10-20k. Really depends on undercarriage and everything. New undercarriage would cost more than the machine is actually worth. This thing is worth more to me then i would get if I sold it.
I know what you’re getting at but I have trouble believing you have a clue. 15 tons? Just scrapping the undercarriage and blade I guess huh?
You have hold on trees to go
Is that the same size as a d8 cat
She needs a better turbo or the exhaust leak fixed
Find any arrow heads?
No. Didn’t really look but this isn’t a very good area for them. Used to find them at my grandparents all the time.
As a diesel fitter in Aus who owns a couple of TD that sounds terrible it has a nasty rattel and as someone else said it has a bad miss Garrey
shut it down gonna blow up.
sounds like you should check your fuel injectors. The motor has a little skip in it.
@@thebalerman Valves were my first thought based on what I could hear through my phone speaker, but looking at the dusk footage of the exhaust flames and smoke throughout made me think pump timing, maybe worth a check if you haven't already as that would give a pretty even temp across heads/manifold, although I wouldn't be surprised if a few valves were coked up.
Great seeing the old girl running though 👍🏻 makes me wish I still had my old BTD6's and Drotts, keep up the good work.
Sounds like a burnt valve to maybe more than one
Think it's about time to buy a new one... That one just don't sound right at all and smokes way too much.
Sounds like it’s got a burnt piston it Is definitely missing
That machine needs to b repaired
Turbo isn't working right. To much black smoke. My little 1010 JD all you see coming out the exhaust is heat.
This is the third time trying to post this comment. “ I just noticed that raccoon coming out of that hollow locust tree “
I think i know why... if you say the short name for raccoon ie raccoon without the rac its a racial slur and youtube doesn't like that even if its related to a real raccoon...
Skipping?
ESE MOTOR TIENE UNA FALLA DE VALVULA, PUEDE ESTAR MUY APRETADA O MAL ACENTADA
Sounds like a stuck or bad injector
sounds like you might have a buggered injector?
Is me Or is that dozer missing on a cylinder
Sounds like she missing abit ?
You have a cracked exhaust manifold , I H was never a dozer to be competitive with cat ,, i watch these u tube vids an every dozer I see really never has a clearing rake on them always a blade , in my 40 plus years clearing land an excavating I learned if you have a saw you need a ruler
@@thebalerman hey I'm not cutting your dozer down they really have the advantage with the duall track drive, I'm just a cat man have a d 7 also have a hydrostatic j d which is constant drive , but a major oil leaker, that's what made me a cat man an in many ways more expensive than cat an cheap made lol
Sounds like it needs a set of injectors. Too much smoke and engine popping.
I would guess you have a bad injector or 2
Just put #6 liner & piston in 817 in a 25c this c came from Greg , Alex got us valves & gaskets. What do you think of the TD9 they got there.
@@thebalerman The TD9 is a 1943 has the same engine as a WD9.
LOOPT OP 5 POTEN
Run them damn rattlesnakes out of there !!
Exhaust leak
I had an hd16 with a burned intake valve it made a similar whop whop noise that came back through the intake but yours sounds more like exhaust
Your engine is not running right you have a burned valve or a bad injector
It is criminal to run a machine with a bad hole like that.
That is one big ass bulldozer
Think you got a cracked exhaust manifold, your losing turbo pressure ,, I H sort of copied cat design
sounds like she needs a valve job
@@thebalerman i ran inot a issue on a 750 John Deere, had a broken rocker shaft bolt, would run and make a missing sound just like a injector, smoke bad. good to check the valve train and exhaust ports for cracks in the head also. International machines are still one of the best being old
Contaminated fuel
Why do people start up a desiel engine and right away hit the throttle???? Thats just insane!!!! Especially on old style engines. Perfect way to drop a liner and or score the shit out of them. Cant believe the mentality of ppl now a days!!!!! So glad they aint near any of my equipment!!!!! Including wheel barrels!!!!!!
Because everyone now a days is impatient, you have a generation that is instant gratification and don't give a fuck, agree 100% they would never touch my equipment!!
Just don't know any better
Why do people nowadays think they know everything from behind a keyboard? I see it all the time. I reved it up a bit quickly to ensure the turbo was spinning. You run your stuff and I’ll run mine.
@@thebalerman you know 45+ plus years around heavy equipment says your wrong...and it shows you're afraid of it!!
What are you talking about? Afraid of what? How am I wrong? I didn’t even make a statement that could be wrong…are you confused?