Repairing Windows Boot Partition and Boot Files | [Resolved] bootrec fixboot access denied

Поделиться
HTML-код
  • Опубликовано: 30 июл 2024
  • Sometimes we encounter problems in booting our windows system up. Even after trying to do automatic startup repairs, the windows fail to boot. It gets stuck in a continuous failed boot loop. This may be because for some reason the windows boot manager is misfunctioning. In this video, we will completely rebuild the startup partition and boot files for windows.
    For this, we will require Windows installation media. It can be created using an app called Rufus or Windows media creation tool from the Microsoft website. The process is simple and a guide to create windows installation media is covered in this video:
    • Creating Windows Insta...
    In this video, we have also covered the resolution to the Access denied message that we may receive while using bootrec fixboot command.
    The list commands used in this video are:
    diskpart
    list disk
    select disk 0
    list partition
    select partition 1
    format
    list vol
    select vol 2
    assign letter=g:
    exit
    bootsect /nt60 all /force
    bcdboot c:\windows /s g: /f all
    bootrec /fixmbr
    bootrec /fixboot
    bootsect /nt60 sys
    bootrec /rebuildbcd
    exit
    Note: Please use the disk, partition, and volume number as shown in your system. Also, use your systems path to the windows folder while using bcdboot command.
    I hope this video helps in repairing your system's boot partition.
    Thank you.

Комментарии • 32

  • @neilssterling5122
    @neilssterling5122 8 месяцев назад +3

    I don't have words to express how grateful I am for this video tutorial!!!! Since I decided to install Debian alongside Windows it just screwed up the mbr in a way that I couldn't fix. Even after uninstalling Debian. This tutorial fixed the problem very easily. Can't thank you enough for this!!!

  • @szymonpawowski1916
    @szymonpawowski1916 6 месяцев назад +2

    Amazing tutorial. Thank you very much. This fixed my laptop!

  • @sridharpadaki9609
    @sridharpadaki9609 6 месяцев назад +1

    wonderful step by step guidance. definitely fixed my problem. Thx thx

  • @shyamrajendran
    @shyamrajendran Месяц назад

    You're a lifesaver! Thank you so much for this!

  • @min_mit
    @min_mit 4 месяца назад

    Thank you bro for this tutorial. My PC works now!

  • @JorgeAdolfoMartinezGutie-by9rj
    @JorgeAdolfoMartinezGutie-by9rj 5 месяцев назад

    Muchísimas gracias, me sirvió bastante

  • @LeoiTech
    @LeoiTech 2 месяца назад

    Thank you very much, works perfect here.

  • @JoieStar82
    @JoieStar82 3 месяца назад

    Thanks for the steps. Now my laptop is fixed.

  • @neferer
    @neferer 3 месяца назад

    Thank you very much.

  • @Huremix
    @Huremix 6 месяцев назад

    Thanks, work fine for me

  • @irmantaspilypasinformacini9165
    @irmantaspilypasinformacini9165 16 дней назад

    Thank you very much !!!😎

  • @franciscogalvan498
    @franciscogalvan498 9 дней назад

    thanks a lot!!!, you save my life :)

  • @emilianomartinez271
    @emilianomartinez271 Месяц назад

    You saved my life!!!!

  • @aenjelica
    @aenjelica Месяц назад

    What do I do if after
    “ bcdboot c:\windows /s g: /f all “
    it says
    “failure when attempting to copy boot files” ?

  • @yrage6177
    @yrage6177 3 месяца назад +1

    I did all those steps but still the /nt60 sys command didn’t work

  • @JhonyHDV
    @JhonyHDV 4 месяца назад

    No found bootsect /nt60 sys. Dont foun partition error

  • @user-kr1tm6zk6e
    @user-kr1tm6zk6e 4 месяца назад +1

    thank you so muchhhh.. fix my issue.. i was using raid disk mirror and somehow the boot sector is located on the other targeted mirror disk only and not in the master disk

  • @lordbebech
    @lordbebech 2 месяца назад

    Still getting acces denied when trying bootrec /fixboot after bootsect /nt60 sys

  • @anmac6910
    @anmac6910 Месяц назад

    I'm getting this error after completing all the steps above and restarting the windows 11 vm again normally:
    Your PC device needs to be repaired
    The operating system couldn't be loaded because the system registry file is missing or contains errors:
    File: \windows\system32\config\system
    error code: 0xc000014c
    What should I do ?

  • @findinggreatness
    @findinggreatness 24 дня назад

    And how do you expect me to do this when my computer is not functioning

  • @smamas114
    @smamas114 Месяц назад

    After the steps in the video still not booting , i had to go to recovery and use the startup repair after that he repaired the c drive but when booted to windows a blue screen appeared, critical process died , after the restart it went to desktop...after couple minutes system service exception bsod .......i have installed a new ssd m2 and clone the other ssd and i had some bsod error but i couldn't see in the bsod viewer and i have changed the uefi to legacy and changed to something else there and because of that was not booting in the first place , no i am running chkdsk and found errors again, i hope i am going to fix it because I don't have time to reinstall windows again 😅

  • @ablahtarn
    @ablahtarn Месяц назад

    it work for me 🎉🎉🎉🎉🎉

  • @Atomcracker
    @Atomcracker 8 месяцев назад

    I have completed all the steps as mentioned. Just as you showed on the main screen the fixboot command was successful after the 2th time. But the same problem occurs, when the PC is starting up it enters the windows where I can press 'del' for example. And after a few seconds, it crashes and reboots in the same loop over and over

    • @tinytips4823
      @tinytips4823  8 месяцев назад

      You may try other commands like:
      1. chkdsk f /r C: (C denotes the system volume)
      2. DISM /online /cleanup-image /restorehealth
      3. sfc /scannow
      There may be some other thing that may be causing issue. Few months back I had an issue in my system where my laptop was booting fine and then crashing. Then rebooting and crashing. Sometimes it rebooted till the windows logo appeared then froze and crashed. The cycle continued. After all software trouble shooting, I tried checking my RAM. I used windows memory diagnostic tool and my laptops Hardware diagnostic tool, to check my RAM. The diagnostic tool checks for hardware issues before booting into OS. So it rules out all probable software related issue. The extensive test found that one of my RAM stick was failing. But the failure was not persistent. RAM failed 3 out of 4 times. So, I took out the RAM. Blew dry air to remove any dust on the pins on the board. Used an eraser to rub the pins of the RAM gently and remove any possible carbon deposition. Then cleaned the RAM pins with Isopropyl alcohol. Then seated the RAM in its slot. Since then, the crashes are gone and the RAM passes 5 consecutive extensive Hardware diagnostic test. May be RAM is giving issue in you case. You may try testing your RAM when all software troubleshooting fails.

  • @eslamessa5002
    @eslamessa5002 5 дней назад

    i love you ❤

  • @invisiblehole8956
    @invisiblehole8956 Год назад

    It's not working i get access denied then the requested system cannot be found

    • @tinytips4823
      @tinytips4823  Год назад

      Try using the USB in 2.0 port, or try windows repair optical disc.
      May be your system disk is GPT. A GPT system disk boots Windows with UEFI/EFI mode. If the repair disc/USB comes with MBR boot mode, Windows cannot find the requested system device. If Windows also report the installed version was not a compatible Windows version, you can turn off the UEFI boot in BIOS and run the repair commands again.

  • @MathMagicMoments
    @MathMagicMoments 3 месяца назад

    Can i disconnect the usb boot pendrive once I'm done with this process? Btw thanks it's working now

  • @cracked-nut5524
    @cracked-nut5524 7 месяцев назад