How To Fix Bootrec /fixboot Access is Denied During Fix Boot Configuration (2 Fixes )
HTML-код
- Опубликовано: 29 июн 2018
- Here are two ways to fix bootrec /fixboot Access is Denied During Fix Boot Configuration.
- Get genuine Windows keys at 𝑷𝒓𝒊𝒎𝒆 𝑻𝒆𝒄𝒉 𝑴𝒂𝒓𝒕. Use ET20 for 20% OFF, links below:
✅ Windows 10 Pro key: bit.ly/3jpllQv
✅ Windows 11 Pro key: bit.ly/31jyHdg
✅ Office 2019 Pro Plus key: bit.ly/2QCtwfS
✅ Office 2021 Pro Plus key: bit.ly/3q4P089
✅ Other Software Products: bit.ly/3r03TYu
This video shows two ways to fix Bootrec /fixboot Access Denied during fix boot configuration.
For updated instructions and download links, check out the text version of this tutorial on our website: www.easytechstutorials.com/ho...
✅ Download Windows 10 Build 1703: www.mediafire.com/file/4wm7ww...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🧰 𝐀𝐃𝐃𝐈𝐓𝐈𝐎𝐍𝐀𝐋 𝐓𝐎𝐎𝐋𝐒 𝐀𝐍𝐃 𝐒𝐄𝐑𝐕𝐈𝐂𝐄𝐒 𝐈 𝐑𝐄𝐂𝐎𝐌𝐌𝐄𝐍𝐃
✅ An awesome data recovery tool I use to recover lost or deleted files:
💠 Windows Data Recovery: bit.ly/3MTYg94
💠 Mac Data Recovery: bit.ly/43O2NAu
► 20% Discount Coupon - 𝑬𝒂𝒔𝒚𝑻𝒆𝒄𝒉𝒔
✅ Properly Transfer/Migrate Your Windows Apps from One PC to Another:
💠 EaseUS Todo PCTrans Pro: bit.ly/3quGm59
► 20% Discount Coupon - 𝑬𝒂𝒔𝒚𝑻𝒆𝒄𝒉𝒔
✅ Securely Erase Files, Folders & Volumes Permanently:
💠 Windows BitRaser File Eraser: bit.ly/3Ngzf9r
💠 Mac BitRaser File Eraser: bit.ly/3OYx1wA
► 10% Discount Coupon - 𝑬𝒂𝒔𝒚𝑻𝒆𝒄𝒉𝒔
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Disclaimer: Some of these links go to my website and some are affiliate links where I earn a small commission if you purchase, at no additional cost to you.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🛠 𝐎𝐓𝐇𝐄𝐑 𝐑𝐄𝐋𝐀𝐓𝐄𝐃 𝐈𝐒𝐒𝐔𝐄𝐒 𝐀𝐍𝐃 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍𝐒
► How to Fix Grub Error no Such Partition. Entering Rescue Mode:
www.easytechstutorials.com/ho...
► How to Troubleshoot a Laptop That Won’t Turn On:
• How To Fix or Troubles...
► [SOLVED] Operating System Not Found (No Bootable Device):
• How to Fix Operating S...
► Computer Can’t Enter BIOS | How to Force It:
www.easytechstutorials.com/co...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔔 𝐒𝐔𝐁𝐒𝐂𝐑𝐈𝐁𝐄: goo.gl/dDSBNL
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🗣 𝐅𝐎𝐋𝐋𝐎𝐖 𝐔𝐒 𝐎𝐍 𝐒𝐎𝐂𝐈𝐀𝐋 𝐌𝐄𝐃𝐈𝐀
► Twitter: easy_techs?lang=en
► Facebook: / officialeasytechs
► Reddit: / easytechs
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👨👩👧👦 𝐒𝐔𝐏𝐏𝐎𝐑𝐓 𝐔𝐒 𝐎𝐍 𝐏𝐀𝐓𝐑𝐄𝐎𝐍: / easytechs
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👁 𝐀𝐁𝐎𝐔𝐓 𝐓𝐇𝐈𝐒 𝐕𝐈𝐃𝐄𝐎
This video shows two possible ways to fix the problem of “Access is Denied” when you try to run the bootrec /fixboot command in Windows. This command is normally used to fix a number of startup problems like “Windows Failed to Start A Recent Hardware or Software Change Might Be The Cause”, blue screen of death that says “Your PC Ran Into a Problem and Needs to Restart”, black screen on startup, missing boot device, et cetera. The bootrec command rebuilds the Boot Configuration Data file, that’s the BCD, in cases where the file is missing, corrupted, or isn't properly configured.
1. The first method is to recreate the EFI directory structure and reconfigure the boot files using BCDBoot command.
2. The second fix is to configure your USB with the 1703 build in order to run your bootrec commands without errors. (This process will not downgrade your Windows from 1803 to 1703, it only provides you the command line terminal from the 1703 build from where you can run the bootrec commands without error).
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🎶🎶 𝐁𝐀𝐂𝐊𝐆𝐑𝐎𝐔𝐍𝐃 𝐌𝐔𝐒𝐈𝐂
Music: RetroVision - Campfire [NCS Release]
• RetroVision - Campfire...
#Bootrec #fixbootaccessdenied #fixboot #fixbootconfiguration 
Наука
![How To Fix or Troubleshoot a Laptop That Won't Turn On [#1]](http://i.ytimg.com/vi/Tj3lwjxvKt8/mqdefault.jpg)
![How To Fix or Troubleshoot a Laptop That Won't Turn On [#1]](/img/tr.png)
Get genuine Windows keys at 𝑷𝒓𝒊𝒎𝒆 𝑻𝒆𝒄𝒉 𝑴𝒂𝒓𝒕. Use ET20 for 20% OFF, links below:
✅ Windows 10 Pro key: bit.ly/3jpllQv
✅ Windows 11 Pro key: bit.ly/31jyHdg
✅ Other Software Products: bit.ly/3r03TYu
Hey men in list disk my computer told "there are no fixed disks to show "
Sir while typing the bootrec / fixboot it is giving error like"the volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted".what to do sir can you guide me.
Hey I was not able to complete the last command successfully. What do I do?
Sadly this did not work
Still fixboot shows access denied
Great post EasyTechs, thank you!
Unfortunately I got stuck at the "bootrec /fixboot" part (3:55) with the Access is denied error. Instead of downloading the 1703 load and trying again (I didn't want to wait for the download again) I found the fix that worked for me was using your info up to 3:55 and then adding the info in Tlou Manamela's reply (one of the 143 replies to M. Asyrof Muzakki's reply that's currently located in the reply thread at 1 year ago below.
What Tlou Manemela wrote was: type> bootsect /nt60 sys then type> bootrec /fixboot .
That fixed my non booting Windows 10 that I broke when removing the dual boot Linux Mint sector. I wanted to share what worked for me since I just happened to fall on the reply from a year ago. Hope it helps someone else.
Tashi Dante yea, still says access denied
THANKS was getting denieed...then tried the bootsec and then fix...SUCC ESS! thanks all!
But wt after that do I have to do ,
1. ren BCD BCD.old
2. bcdboot c:\Windows /l en-us /s V: All
3. bootrec /rebuildbcd?
exit
or
1.bootrec /scanos
2.bootrec /rebuildbcd?
exit
or
bootrec /rebuildbcd?
exit
please respond I am struggling !!
helped for me, thank You
Bro u are a genius
SUCCESS!!! I had to download the 1703 install per your second half of the instructions. IT WORKED!! I am back into my system and the relief of being able to once again boot my system is amazing. Thank you and Happy Holidays!!
Bruhh it dosent boot on it…
Mine is V:\efi\microsoft\boot>bootrec /fixboot
Access is denied
Same for me
Same
Muhamad Asyrof Muzakki SAME. CAN ANYONE PLS HELP US. I HAVENT TOUCHED A VIDEO GAME FOR WEEKS AND IVE GOT PROJECTS TO DO MAN
Erynnallama same broo
Me 3
mine went from giving me access denied to this volume does not contain a recognized file system.
Thank you for providing the second method that no one else bothered to provide. As I have images of every version of Win10 available, it made the task super easy after the first method failed.
Good to know it helped you out, thanks for the feedback!
Same here!
Thank you so much, your last option to use the USB with 1703 fixed my pc really fast when all options on other videos failed like. If anyone still has problems with the access denied and other stuff, I recommend this.
Good to know it helped you out, thanks for the feedback!
My computer won't boot to Windows so option 2 is impossible for me and the first option does not work it still says acces denied.
Exactly what I needed... the second half of this video was crucial to my situation. Thank you for making this! I'm not sure I would have solved it without this video. Kudos!
Good to know it helped you out, thanks for the feedback!
After bootrec /Fixboot i am getting access is denied what to do?
I think I may have found a fix for those of us who were able to get fix #1 to work up to the very last step but when we typed bcdboot c:\windows /l en-us /s V: /f all, we got the error messaging saying “failure copying boot files”. So much earlier in this video when we tell us to types list vol to list the volumes and then he says to select the volume labeled System Rese as shown in this video as volume 1 with letter C. He then explains how to rename the volume to V and then we continue with the rest of the steps. Well after fix 1 failed on the very last step I recalled that I didn’t have a volume labeled System Rese. The only volume I have are Volume 0 Letter D which is labeled Recovery, Volume 1 Letter C labeled Windows, and Volume 2 (no letter assigned) labeled SYSTEM.
The first time I tried fix 1, I chose volume 1 letter C and renamed it to V as he instructed. But I got to thinking that maybe it’s Volume 0 Letter D labeled Recovery that is actually the correct volume that is comparable to Volume 1 C System Rese in his video.
So first I went back into DiskPart and renamed volume 1 from V back to C how it was originally. Then I listed the volumes again and started where he says to select volume, but instead of selecting volume 1, I selected volume 0. I then renamed volume 0 from D to V. Your Recovery Volume May be labeled something other than D, but whatever it is, rename it to V.
So then after renaming my Recovery volume from D to V, I exited DiskPart. Before I continued with his instructions, I entered the command bootsect/nt60 sys and hit enter. Then I entered bootrec /fixmbr and after that was successful I entered bootrec /fixboot. After that was successful this time due to first entering bootsect/nt60 sys first. After fixboot was successful I tried the final step entering bcdboot c:\windows /l en-us /s V: /f all and my god it worked. I got a message saying Boot filed successfully created. I then typed Exit and went back to the windows recovery page and chose advance options and re-entered command prompt. I was able to successfully rebuildbcd and fixmbr, but right before you enter fixboot, you need to enter the command bootsect/nt60 sys. After you enter that command then you can enter the bootrec /fixboot command. Mine was successful. Now this is what fixed the fixboot issue and the issue with the final step bcdboot c:\windows /l en-us /s V: /f all
VIDEO PLEASE :)
Eric Reyes what if you don’t have the recovery option? My volume 1 is windows and my volume 3 is system. 0 and 2 have no label
Saviour!
THANK YOU THANK YOU THANK YOU! TRULY FROM THE BOTTOM OF MY HEART! Struggled ALL day to fix MBR error and your previous 17.3 version of Windows 10 Boot disk did the trick when all other "paid" solutions failed. You are AMAZING for sharing this video and the resolution tools.
Good to know it helped you out, thanks for the feedback!
@@EasyTechs Do you have Paypal or Zelle? Sorry, don't have high confidence with Patreon site.
Sir how to use the downloaded files?
Extract then just put it in usb? How to execute it when booting?
You are the hero we needed, I had to chance a fell things in the process but absolutely nailed it. Boot fixed
First let me say thank you.
I vaguely remembered you had to mount and setup the device before running the command but all the google answer skipped that part so i ended up bricking my computer.
Your tutorial helped me repair the mbr perfectly. Also thank you for spelling the commands when looking at the letter L i could not tell if it was a i or something else.
Just subbed your channel for this flawless explanation.
Seems like this is helping EVERYONE BUT ME😢😢😢😢😢😢😢😢😢😢😢😢😢
It did not help me I feel your pain
Me too, did u guys get any help i always get access denied 😭😭
I feel you it's not helping me
@Techprology how to get in x: sources? Because mine is X: \windows\system32\
@Techprology THANK YOU SO MUCH IT WORKED!!!
After 4:04 mine says Failure when attempting to copy boot files
Same did you find any solution for that
thank you have been banging my head on the wall for a week and it now works thought i had lost all my data
Good to know it helped you out, thanks for the feedback
Your tip about newer installation media not allowing /fixboot was key to our fix. Fortunately we had an 8.1 installation DVD, which had an older version of the command prompt, and fixboot worked through that.
That's the most useful that 8.1 install disk has ever been!!
Kudos to you for a very helpful video! Thank you!
"That's the most useful that 8.1 install disk has ever been!! "
LOL... No Doubt.
You really saved my day (and night), thanks for sharing. Option 2 solved my problem :-)
Good to know it helped you out, thanks for the feedback!
@@EasyTechs "MARK PARTITION AS ACTIVE" IS GREY OUT FOR ME, WHAT DID I do wrong?
Failure when attempting to copy boot files on the /f all command. Any help?
this tutorial actually works for me.. It's a life saver! Thank you very much. More videos like this please!
OMFG DUDE YOU ARE A GENIUS 2nd method solved my problem and restored my windows pro , GOD bless you sir !!
Good to know it helped you out, thanks for the feedback
@@EasyTechs please tell me how to use the downloaded file from the usb
@@EasyTechs sir my brother PC c drive full, he continued work . Now window not open. What to do.
@@ssinghdutta84 any success?
the link for the older version of windows isn’t in the description does anyone have one?
Thanks dude, that was awesome. You helped me fix my system after I didn't dual-boot it properly.
La segunda opción me salvo la vida!!! Esos archivos que subiste a Drive son un milagro. Solo los descargue, los puse en una memoria con sistema NTFS y desde la BIOS le dije que utilizará en primera opción a la USB como arranque del sistema y si sirvió!!!
For the people that are still getting access denied try using the auto recovery option after following all the steps, up to that point. Worked for me.
Can u please guide me to step by step how to do it because i m also facing the same access denied problem please help mi for this
Thank you!
I have a computer that had the "BOOTMGR is missing" issue and ran into the BOOTREC /fixmbr access denied" problem and was getting nowhere with other fixes. The problem it turns out, is that this is an older computer that doesn't have UEFI, had been upgraded from 32 bit Win 7 and was on build 1803.
After creating the USB drive with the files you provided, I did as someone else did here, went straight to the automatic repair and it worked!
Talk about an obscure problem and even more obscure solution.
I was about ready to throw in the towel and do a clean install when I found your video.
Good job! Thanks again for sharing!
Than you so much for the feedback, good to know it helped you out
Thank you so much, I thought I had no hope! The second method worked for me.
good to know it helped you out, thanks for the feedback
I got acces denied
You just got a like and a new subscriver!
Thank you for helping me on this one!
Good to know it helped you out, thanks for the feedback and welcome to the community
Subscriver
Whata Legend. Got me going when nothing else on the net was working. The partition was no longer a master boot drive and the first option fixed it
had to download and use build 1703. /fixboot completed successfully. but then had to reboot again into advanced options and select startup repair. all fixed now. thanks!
Good to know it helped you out, thanks for the feedback
What did you do with the files from the download? I've downloaded it but not sure what to do next
you have to copy them to a bootable USB stick. then boot from the USB 6:03
Hey there, glad to hear this tutorial helps. I have a question about the download. Did you just unzip the parent folder and copied into your flash drive or the child folder of Windows? Or which files are required to make it work? Thanks.
yes it's confusing how build 1703 is downloaded from Google Drive. took me some time to figure it out.. here is what you need to do
1. after you go to EasyTechs' link click through to the the x64 or x86 folder depending if you want a 64 bit or 32 bit windows 10
2. click the download all icon
3. 2 files are downloaded. 1 zip file and an install.esd file
4. unzip the 1 file and place the contents on the usb
5. then put the install.esd file into the Sources folder on the usb
6. should be now ready to boot from usb
I have downloaded the link but after some hours my load says
"Failed - Server Unreachable"
This really works after many many other tutorials. Thanks a lot! 🙏🏻🙏🏻🙏🏻
Thank you for the video to fix bootrec /fixboot access is denied. I am happy to find another fix. I used "System Restore" in the "Advanced Options" provided by the system, which uses a restore point on your PC to restore Windows, and successfully restored Windows in my PC.
If you get the error copying boot files, ensure you're typing the correct disk drive letter. In other words, D was my disk drive and not C
i got a question do you also change thr bcdboot c: to bcdboot d: ?
Mine says Failure when attempting to copy boot files.
Thank you so much brother it really helped me so much and you saved my money 🥺❤️❤️❤️❤️
My problem was I needed the build 1703... your tutorial walked me through the process effortlessly! Then I had a RAW drive causing Windows to respond terribly slow (while windows tried to figure out what file system was on the vol) . All Good now.
Thanks EasyTechs
Thanks! It has helped me a lot, mate
Good to know it helped you out, thanks so much for the feedback!
Data backup or not
I have the access denied problem even following this method. I tried restarting my PC to boot windows 10 and it worked this time. So i try it out, may be it will for you too with only 2 steps.
Thanks a lot, method 2 totally worked! :D
Good to know it helped you out, thanks for the feedback!
Hello! How does it work? Do I just save it to the pendrive, stick it in and it'll start running? Are there additional steps?
You are a lifesaver! thanks for the great help :)
It worked for you on Windows 10 or 11?
How do i know which partition is the system reserve, if its not labeled? Help me please!
On some computers (I have a Lenovo ideapad touch) the system reserve partition is combined to the windows 8ios system. That’s what tech support told me, but online it says it could be the partition with 350MB for Windows 8ios...however that partition does not have a letter assigned to it. I haven’t touched either, so I am going to try a different method.
Just a guess but it is usually inside the c drive
It should be a volume with capacity between 99 and 350 mb
4:00 still access denied.
Mine says the same thing 4 mins in.
Me too
I don't have enough memory on my ssd to boot windows after I uninstalled an update. Have no idea what to do. I can't run anything. I really need help!
Thank you so much man! Your a wizard!!
Good to know it helped you out, thanks for the feedback!
@@EasyTechs hi
I had an error in /fixboot . Says access denied. Then i wrote "bootsect /nt60 sys" (without the "") and press enter. Now try again bootrec /fixboot and Will work. Then just follow these comands
bootrec /scanos
(It can find 0 or 1 Windows installations)
bootrec /rebuildbcd
exit
Thanks for this video
Thank you bro :)
Thanks, just tried it and it worked for me :)
Thank you! This worked
Thanks a lot.. it worked !!!
Acces is still denied
It's nice to partition your disk after installing Win 11, partition assistant can handle this perfectly.
To follow the instructions, volume D where my WinRE file is was selected and the letter R was assigned. No fixboot as the same message shows up: access is denied. But none shows up from the disk list and the cmd is running from x such as x: windows/system 32. The cmd DIR shows up. How to recover the OS disk c? None can be run from the Advanced Trouble Shoot so the cmd is the only option.
Thanks for the video. My EFI partition was a FAT32, 260MB. executed the BCDboot command to C:\windows and exited. Booted back up.
3:37 after cd /dv: \microsoft\boot\
It's the system cannot find the path specified
Mine does this Too any fix ?
@JorgitoYokiro Thanks got me a step ahead
First, thank you EasyTech for this helpful video !
I would add that bootrec commands are meant to be used with MBR partitions, not GPT. This is also why you could get the "Access denied" error when using /fixboot.
For GPT partitions, you should have a look at bcdboot commands as shown in the video !
Can you explain because I stuck at bootrec /fixboot
@@ElivTraveller type bootrec /fixmbr
@@unknownquote3246 then it says failure when attempting to copy boot files
@@unknownquote3246 Thank you for making this comment
@MisterGus74Thank you for posting this comment
THANK YOU SO MUCH!!!
I got lost at MD \efi\microsoft\boot\.
Can you help me? Getting an error "the directory or file cannot be created". Need major help. Thank you if you can help me.
Thank you for this. You just solved a problem even Microsoft couldn't fix for me!
Good to know it helped you out, thanks so much for the feedback!
Thank you so much for your helpful videos. Words alone aren't enough to express how much I, and many others here, appreciate the gift you have and that you're so willingly sharing it to help other people. You brought my PC back to life and saved me a major headache. Thank you.
How did the first seconds, your command said it didn't have enough memory, and as I clicked command prompt my screen said the same thing, not enough memory
everything works till I get to bootrec /fixboot. I get "bootrec" is not recognized as an internal or external command, operable program or batch file. No idea what to do now.
3:59 access still denied 🤭
Any fix
Also having access denied at this point, as well.
Yep me too
@@Leaf8823 same
Same here
If you had some data in C Drive and want to reinstall window again without losing data for that you can boot Linux on USB drive and run it live and there you can access all of your data and you can copy your data in external hard disk or other drive
How about showing us a step by step guide for this option? Or maybe recommend a link?
It didn’t accept any of my volumes and I tried all. How do I check if they have been corrupted?
Thank you alot from Paris ! Smart move and explanation.
Hi I followed the first solution, but I got access denied still. I also have system re and boot as available drives. I used system resto as you indicated. Still got access denied. I tried doing the second solution, but after doing clean to the USB in the command prompt, mark partition as active ebecomes grayed out.
type “bootsect /nt60 sys” without the quotations first and then “bootrec /fixboot” without quotations should work now!
@@1truekid you're a genius bro. That worked. Thank you!!!🙌🏾🙏🏾
Thanks 👍 it worked out bro
@@1truekid Am getting "failure when attempting to copy boot files"
Do not run the "bootsect" command (e.g. "bootsect /nt60 sys").
You don't need "bootrec /fixboot" or "bootrec /rebuildbcd" command if you use the BCDBOOT command.
The BCDBOOT command works on both GPT and MBR disks (Windows 10 and Windows 11).
I tried to run chkdsf but it was not wokring and I have to use third party tool to repair mbr to fix this issue. Ao mei partition this one is nice.
Hello, thank you for the working windows repair tool. this allowed the fixboot to be performed as your video intended to repair. It took me a little bit as your instructions on the usb were a little vague. When unzipping the windows file you need to copy the files from inside the windows folder directly to the usb root directory or the usb will do nothing. Second when performing the command bcdboot c:\windows /l en-us /s V: /f all I was presented with an error unable to copy files. (at this point i went back to diskpart and selected the v: drive and performed a command to assign it back to C: and then typed in c: to change to that drive and tried to perform the same command - the V: , but was still met with copy error.) what fixed my boot from here was exiting out of command and going to startup repair and performing an auto repair at this time the computer rebooted directly to my windows... You are much appreciated to have gotten me this far, I sincerely thank you as I had been awake for about 36 hours trying to get my windows back.
Even though I had the access denied issues, it was the commands in the first half of the video that fixed my problem.
can also fix by repairing mbr with ao mei partition assistant
MY FIX Nothing worked for me, I was getting access denied everywhere. In the end I stumbled upon this: open CMD and only type this: bootsect/nt60 ALL. Then turn it off and start normally. That's all it took! One line!
I love you Diana for sharing this, I was going to smash my laptop after nothing worked for me except your one line command🌺
Not sure about this on a dual boot system ?
Thanks a lot!
Really helped out, thanks!
After doing bootrec/fixboot i am getting access is denies what to do?😢
Hi...thanks for the tips....... so What do I do if I don't find my HDD listed on the list vol or even list disk
Hello guys😭
I had "Access denied" at fixboot and I tried this command :bootsect /nt60 sys
And it said "the requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria"
Please help!
4 minutes into the instructions, and I still receive the error, access denied 😞
Me too
Excellent!!! I used the second option...worked immediately... thank you very much for taking the time to show this solution...
Good to know it helped you out, thanks for the feedback
@@EasyTechs hi
thank you so much this saved my pc
Got two files from the 1702 download, and you kinda skip over what to do with them.
Bro v:\efi\microsoft\boot>bootrec /fixboot
Access is denied
My not problem solved
Even after bootsect/n60 sys the fixboot command is not working and still I get the access denied message
What to then?
After typing in a bunch of this it said failure when attempting to copy boot files and before that access denied now what
Hi Nick, thank you for another great tutor video. The first method doesn’t seem to work for me so I choose the second method. I followed the exact steps of your instruction and unzipped the windows installation files folder to a USB drive, unfortunately it doesn’t boot from pc. The very pc I am using will boot all other USB except this one. However I have pasted to Ventoy drive which I am now can see the folder, there is a setup executed file .exe in the folder, I am very much tempted to open it but I thought better to ask for your opinion since it is not auto booted from drive, would I run into any problem to install the window this way? Thanks in advanced.
When I get to: type in "cd /d V:\efi\microsoft\boot\" then after that I enter "bootrec \fixboot" I get "Access is Denied".
me 2
Me too :(
same
You used the wrong slash... Not \ but / makes a big difference....
@@JF32304 I used fwd slash correctly and still got "Access is denied." Other solutions>?
This solved my problem! Thank you!
Thanks for supporting us on Patreon, so kind of you.
@@EasyTechs plz help .. still facing access denied option
up until the cs /d V:\efi\microsoft\boot part was okay but i got the element not found error when i selected fixboot
Hi there, can you show what the files are supposed to look like in the USB folder? I unzipped it into the USB and it does not recognize there's an OS. When I downloaded it from Google Drive, it said it was zipping the file as it should, but then it proceeded to ask me to open/save like 5 different individual files AND the winzip file, but only the zipped file is listed in google drive.
Wrong order. First, try the second fix before trying to move files in your system.
Explain please
Please tell me how to use the files from the usb
assign letter=V: Assigning or removing drive letters on the current volume not allowed here
I had to use uppercase ASSIGN
Same problem, but If I am working in an existing operating systems where lots of important files are available,
Does it data loss?
how can I do to remove the GRUB boot loader option?
As I am getting total identified installation=0?
Everytime i get to the part where you enter “bootrec /fixboot” and hit enter it tells me access denied. Is that because I’m using a custom built gaming pc and have to go thru my motherboard bios or something?
failure when attempting to copy boot files.
Same
Same here
Yup.
@@CharlesReedPi the format was on fat32 that's why
@@jcalzada74 what i do then
Bro I have a problem with the command "md \efi\microsoft\boot\" because here also it says ACCESS IS DENIED. Please help me out
Bhavesh Damor
3 years ago (edited)
Here is the fix
Go to cmd prompt then,
>type bootsect/nt60 sys
this will actually update your target volumes with BOOTMGR Compatible boot code) then try
Again by typing
bootrec /fixmbr
bootrec /fixboot
2021-08-14 impossible to boot my computer with the file you provided us!( shoud i execute first the .exe programme in order to make my bootable drive? Or simply drag and drop the unzip folder is enough?)
So if anybody can help me, i followed the steps up to \efi\microsoft\boot\ where it said there was already a subdirectory file named that that exists. i continued and when i got to bootrec /fixboot it says Access is Denied. Is there any way to fix this or is this the work of some sort of virus i may have accidentally picked up?
It won't work if i run chkdsk command but will work if I rebuild the MBR with Aomei
04:18
"Failure when attempting to copy boot files" Please help me. Thank you.
Fatima Alferez how to fix?
Help-me please
Hi - how did you fix it?
Same issue!
Need help
After "list vol" I entered it and it showed the volume thing but it didn't have anything under it and it's not showing diskpart
When I am entering v drive it shows this volume does not contain a recognized file system
I was follow the all process but while i am typing (V:\efi\microsoft\boot>bootrec /fixboot) then getting error ACCESS IS DENIED.
pls. Help me...
Same here
3:56 ACCESS DENIED!
For anyone here just follow the first part of the video but skip ALL the /fixboot commands. Just do:
the diskpart
then list vol
then select the volume with only around 489 MB
then ensure it has the efi\microsoft\boot folders (mine already did)
then do the bcdboot c:\windows /l en-us /s v: /f all
Then just exit and reboot. Skip everything else in the video
Mine was fixed and working by following the above. Though mine wasn't c: that had my windows on it. Mine was e: So in the last command I had to use e:\windows not c:\windows. Just make sure you use the letter assigned to the volume containing all your files. If you don't know which that is, go with the largest one listed.
Thank You SO much!
Hi, what if it says “failure when attempting to copy boot files” when doing bcdboot
This is exactly what worked for me. The Windows boot manager partition showed up in my bios right after a restart with this fix!
WORKED! I initially skipped your fix to the issue because it seems to simple, and instead I tried all of other methods, including the 1703 build as well as suggestions mentioned by other viewers ..and nope.
I followed your steps exactly, and after rebooting the pc I was in utter disbelief whilst watching my system booting back again. Thank you!
Thanks a lot this solved mi case. (After removing ubuntu with dual boot with grub)
I want to say thank you I've gotten a lot further than I had thought however I haven't figured it out yet I'm going to read through the comments and see if the answer's there thank you
This didn't work for me but here is how I fixed it:
diskpart
list vol
select vol # (replace # with the number of the volume that the windows OS is installed on (NOT the system reserved one he uses in the video)
active
exit
X: (replace this X with the drive letter of the USB or CD drive that has windows recovery disk on it)
CD \boot
bootsect /nt60 C: /force /mbr (replace C with the letter of the hard drive that has windows installed on it)
bcdboot C:\Windows /s C: /f ALL (again replace C with your windows hard drive)
exit
if it worked then you should be able to restart windows without the recovery disk
Thanks it worked
Can I do this again with my win 7 to get my dual boot back??
Thanks for this, you enabled me to fix my roommate's borrowed PC!
bcdboot c:\windows /s c: /f all
Failure when attempting to copy boot files
Help :'(
Update : well the first c: was actually a different partition from the second c: in the mentioned command
It works for me !! Now the windows buffering actually showed up and the boot went smoothly
THANK YOU SO MUCH YOU SAVED MEEE !!!
I don't know how to thank you but you just saved me!
After typing "bcdboot c:\windows /l en-us /s v: /f all", Failure when attempting to copy boot files - this thing comes....
What should I do in this case?
Same here bro
check what is the letter for the volume that you want to install windows
Is there a difference between FAT32 and NTFS when creating a flash drive with Windows ISO in this case?
Well my dell laptop is not booting up (error 0xc0000098) and I have Mac. So after creating bootable USB drive from Bootcamp, dell laptop is not recognizing USB Drive. To explain, My dell default boot mode is Uefi with secured ON. I also tried with secured off. Didn't work on both options.
Then changed mode to legacy. And selected removable USB drive, error shown” operating system not found..”