I have a water globe that I put flowers in and I’ll just say, smaller flowers tend to look better, just cause the globe magnifies the flower. So if you start with a large flower, it almost gets blown out/distorted. But lovely pieces! I can’t wait to see what’s next 😊
When I did a resin rose 🌹 I flooded it. Let it harden. To avoid the bubbles. Then did the layer. It worked for me. Forgot I did make a few resin pieces besides our counter top. I love the molds.
Is so cool. You should make Galaxy inside the spear. Like using glitter and swirl it around. With clear resin and part black and little bit mix of different colors of glitters. Cause when your camera with light made me think of sparkling space that stars was shining down.
Wow!!!! Yes the new molds are def an improvement!! I have ended up just using my sphere mold I have as dome molds... because i too am uneducated in the way of polishing and sanding haha.... I am about to start my first bouquet in resin ... waiting for the flowers to dry... have been madly watching and rewatching your vids on how to do it!!!! Your video are by far the best resin tutorials out there!!!!!
So glad to finally see you do a sphere with a flower in it. That has been my objective since I got into resin. I currently only have the two piece molds and it is a constant struggle to try and eliminate all the air bubbles and get rid of that ring around the seam. I recently changed up the brand of resin I am using and I'm having slightly better luck with less air bubbles, still have that darn ring around the seam. The best way I have seen people polished these fears is on a lathe, which I do not have. Sanding and polishing Spears by hand especially if they contain air bubbles is an absolute absurd task. Glad to see you had some success with this and I will go look for these molds now. Thanks for the video
Love your videos, explanations and especially your sense of humor! To pop resin out of molds, I loosen the silicone mold all around the top and put some diluted dishwashing liquid in. I just squeeze my finger down between silicone mold and resin to work the soap down. Then I keep squeezing the mold and the resin shape usually pops out easily. Be careful because the resin shape will be slippery.
I love how the orange is coming out it looks so cool! Today I let my 7 yr old daughter come play at mommy's work bench and make some resin beads. It was the first time I let her make something. I made a bracelet and she wanted her own so I let her design her own beads. I can't wait to demoed them with her! She loves watching you videos with me. She thinks it is so cool that you replied to me before.
Hi beautiful work, I love it. I was wondering can you pour a 3.07 spear mold at once? Wish I could send you a picture of my huge mistake, so you could tell me what I did wrong. Thank you for all your helpful tips
My husband back when we met at 16 was the pro shop guy at the bowling alley and there he had to drill out many bowling balls with different colors and sparkles and all kinds of different stuff and would need to full holes with resin. But also you can use the same mold they use for a bowling ball. They have different sizes and you can just sand the seams down with a hand sander or a belt sander. I mean I think bowling molds would be the way to go cause bowling balls are Percy spheres with no Seams.
I was just watching Royalty Soaps (Katie Carson) and in her comments I saw some people talking about you and I just popped over. You are going to be on my watch list! You are so nice & talented!! 😁
you do a lot with resin anyone who does so I mean a pressure pot is a given , that's what makes you work turn out perfectly proper, all those air bubbles and everything it's just cute though
Just want to ask if you have a tutorial on how to mix well the resin and how many hours do it cure?? coz my resin dont cure po e sometimes its bendable, sometimes its hard dont know what to do ☹️ hope you can help me thankyou
That mold is awesome!! Maybe apply the glitter to the rose itself. That could be really pretty! I love getting a glimpse of your apartment again!! I have to say that I miss it!! Happy New Year!!!
You're such a joy to watch -- I love your videos! Thank you for this one -- how sweet that they sent you treats that we get to enjoy too. In watching you do this, I wondered if putting the flower closer to the bottom and more layers of resin above it would make it more visible?
Oh wow, got to get those molds! Thank you for being honest in your discoveries along the way. I have also struggled with the China molds. Your are my inspiration my darling.... love that you are, cool,collected and ‘al la natural’ honey in all your vids. Much love 🧡💛❤️💚💙💜
You look like Wyonna Judd. I am looking at your video for the first time and that’s who I though you resemble. I know we bought one/ordered one from Hallmark special moments for like $40.00 or more for a coworker. It had a picture of her deceased sister. Great video.
Absolutely love these. I love doing resin stuff and you are AMAZING but I literally started following you because of your amazing hair! The colours are just... I’m so here for the colours! I know gay man stereotype much haha. I really love your art work, you have amazing ideas and I’ve learned so much from you! I only started doing resin lately, I’m more what someone would think of a regular traditional artist, that and digital, I did the profile pic for instance, but you really opened me up to new stuff so thank you so much.
I watched a video where they use uv resin just to “glue” the two part molds and to prevent from having also spilling resin as that annoying excess of it, making it easier to clean it up; I actually never tried this technique but, who knows... love your work of arts. :D
Hello EVERYONE, (OMG these videos are so cool!) I have a resin question and thought I’d look up the coolest resin channel on RUclips...and here we are! I had a bar made and the top is wood framed resin with beer bottle caps. Buuuuut I just went outside and it’s CRACKED! Do any of you creative geniuses know how that can be repaired?
Would using a pressure pot to pull out the air bubbles be something you could do for your type of casting? I don't do any resin myself but I've seen other crafters use a pressure pot to reduce bubbles in deeper or larger pours.
Your bloopers at the end are what I live for 😭 Your energy is amazing and your personality really shows. Love this video! Keep blessing us with your amazing talent 👏🏼👏🏼👏🏼 FYI you are gorgeous 🥺
I read in the instructions for the Aaj Mold it said not to use the heat gun to pop the bubbles or it might stick to the silicone mold. I see you used a heat gun and I don’t know how else to see if there are any bubbles as it is an opaque blue mold! Any suggestions?!?
Hi there I’ve come Up with an awesome idea I wanted to share with you... to do the Petrie coasters with the ink to avoid blobs I put my white ink into a small spray bottle it’s great!!! Few sprays covers the surface perfect 😍
Would love you to do an orange rose with of course glitter, can never have enough glitter, love your piece's and orange is my happy colour anyway. There are a few men out there that do wood work and resin and have machines that help them buff there piece to a glorious shine. Nick Zammitti is one. Xxx
I have a water globe that I put flowers in and I’ll just say, smaller flowers tend to look better, just cause the globe magnifies the flower. So if you start with a large flower, it almost gets blown out/distorted. But lovely pieces! I can’t wait to see what’s next 😊
This is so amazing. I love how the orange pops. This is an awesome piece. Thank you for sharing this with us.
When I did a resin rose 🌹 I flooded it. Let it harden. To avoid the bubbles. Then did the layer. It worked for me. Forgot I did make a few resin pieces besides our counter top.
I love the molds.
Is so cool. You should make Galaxy inside the spear. Like using glitter and swirl it around. With clear resin and part black and little bit mix of different colors of glitters. Cause when your camera with light made me think of sparkling space that stars was shining down.
Wow!!!! Yes the new molds are def an improvement!! I have ended up just using my sphere mold I have as dome molds... because i too am uneducated in the way of polishing and sanding haha.... I am about to start my first bouquet in resin ... waiting for the flowers to dry... have been madly watching and rewatching your vids on how to do it!!!! Your video are by far the best resin tutorials out there!!!!!
So glad to finally see you do a sphere with a flower in it. That has been my objective since I got into resin. I currently only have the two piece molds and it is a constant struggle to try and eliminate all the air bubbles and get rid of that ring around the seam. I recently changed up the brand of resin I am using and I'm having slightly better luck with less air bubbles, still have that darn ring around the seam. The best way I have seen people polished these fears is on a lathe, which I do not have. Sanding and polishing Spears by hand especially if they contain air bubbles is an absolute absurd task. Glad to see you had some success with this and I will go look for these molds now. Thanks for the video
I have the same problem! I can never get the thing to secure properly closed
My goodness...you are so creative! I love that orange and black!
Let go! GIVE BIRTH! 😆🤣😂 Girl! Your energy! ❤️
Love your videos, explanations and especially your sense of humor! To pop resin out of molds, I loosen the silicone mold all around the top and put some diluted dishwashing liquid in. I just squeeze my finger down between silicone mold and resin to work the soap down. Then I keep squeezing the mold and the resin shape usually pops out easily. Be careful because the resin shape will be slippery.
Wow! The orange on the big one makes it look like it's lit up!
I love how the orange is coming out it looks so cool! Today I let my 7 yr old daughter come play at mommy's work bench and make some resin beads. It was the first time I let her make something. I made a bracelet and she wanted her own so I let her design her own beads. I can't wait to demoed them with her! She loves watching you videos with me. She thinks it is so cool that you replied to me before.
They are gorgeous love the way the orange showed up
That's beautiful! I love the rose. I know I'm super late on commenting. I want to put a few tiny fairies in the middle of it.
Love these molds and I agree the black with orange peeking through is so you! Thank you for sharing.
I really do love how the orange creeps through the black 😍😍😍 super pretty!!
those look so cool, love the orange peeking through tbh
Your energy is just unmatched. You brighten up my day!!
This is the first time i am watching and i love your confidence
beauty and the beast style red rose
they look good
have you tried lacquer spray the rose to see if the black stays put
I haven’t actually! I’ll look into it soon!
Your eye makeup is beautiful. I love it.
A pink rose with dark pink tips would look awesome!!
I love your instructions. Very clean and crisp audio.
Hi beautiful work, I love it. I was wondering can you pour a 3.07 spear mold at once? Wish I could send you a picture of my huge mistake, so you could tell me what I did wrong. Thank you for all your helpful tips
Absolutely obsessed with your videos! Dying to try flowers in resin! Sending love from the Bahamas!!
Oh good to see the new mold..I too tried to do it with the two part mold..aaah nightmare..Thanks 😉
Right? Those two piece molds are so hard to use! ❤️
I love spheres so much. They are beautiful. Those can great. ❤️❤️❤️
But the black rose one beautiful 👍👍 2 thumbs up
My husband back when we met at 16 was the pro shop guy at the bowling alley and there he had to drill out many bowling balls with different colors and sparkles and all kinds of different stuff and would need to full holes with resin. But also you can use the same mold they use for a bowling ball. They have different sizes and you can just sand the seams down with a hand sander or a belt sander. I mean I think bowling molds would be the way to go cause bowling balls are Percy spheres with no Seams.
I was just watching Royalty Soaps (Katie Carson) and in her comments I saw some people talking about you and I just popped over. You are going to be on my watch list! You are so nice & talented!! 😁
Oh boy!! Gotta get those moods!!! Beautiful!!! You made my day, by the way!! Was in the dumps!
Aww 🥰 I’m sorry you were in the dumps but I’m so happy that my video helped! 💖💖💖
It really did.😊
Astonishing is a great way to describe the way it turned out. You did wonderful.
It looks like a red-orange rose that was burned......so cool, amazing 👏 😍
What if you did a flower in the smaller sphere and then put that into the larger sphere by suspending it?
Every time you said “flat bottom” I kept hearing Freddie Mercury singing 😂😂😂 it’s Flat bottom making the rockin world go round in 2021!
now it won't stop. thank you... lol lol lol
Isn't it fat bottom?
That's cute but it's "fat bottom girls u make the rockin world go round" (ironic tho, he was gay)
Loved it and thanks for giving your opinion and woes about the first mold option. Great to have the link for this other mold maker too, so thanks.
I’m new to risen, I am new to your channel, lm obsessed with both 😊
Looks like the roses are burning inside ❤️
I love the roses. They came out perfect.
Thank you so much!! ❤️
Beautiful sphere mold. Can’t wait to see you make more with lighter color flowers. With glitter of course!!!!!
you do a lot with resin anyone who does so I mean a pressure pot is a given , that's what makes you work turn out perfectly proper, all those air bubbles and everything it's just cute though
I'm going to start my own right now... but I think I got some ideas from watching your video... wish me luck!
Just want to ask if you have a tutorial on how to mix well the resin and how many hours do it cure?? coz my resin dont cure po e sometimes its bendable, sometimes its hard dont know what to do ☹️ hope you can help me thankyou
Love the mold. I’ve thought about buying that mold from them but have hesitated, now I know I need to go order them. Thanks 🙄
Never too much glitter!! They came out beautifully 🤩
Not sure if this has been said yet but there is a resin spray that gives dull pieces an awesome clear shine. That might make it easier on spheres.
That mold is awesome!! Maybe apply the glitter to the rose itself. That could be really pretty! I love getting a glimpse of your apartment again!! I have to say that I miss it!! Happy New Year!!!
You're such a joy to watch -- I love your videos! Thank you for this one -- how sweet that they sent you treats that we get to enjoy too. In watching you do this, I wondered if putting the flower closer to the bottom and more layers of resin above it would make it more visible?
I have the Amazon sphere molds as well and my spheres were always dull looking. Glad I can get a different mold now. Thank you for this video.
Oh wow, got to get those molds! Thank you for being honest in your discoveries along the way. I have also struggled with the China molds. Your are my inspiration my darling.... love that you are, cool,collected and ‘al la natural’ honey in all your vids. Much love 🧡💛❤️💚💙💜
You look like Wyonna Judd. I am looking at your video for the first time and that’s who I though you resemble. I know we bought one/ordered one from Hallmark special moments for like $40.00 or more for a coworker. It had a picture of her deceased sister. Great video.
I liked the smaller sphere more for some reason. Both are beautiful as usual. Great work
So pretty...sort of Christmasy and mysterious...villainous...beautiful...thank you⚡️☕️❣️
I like to put soap and water and let the water/soap and also try to get some water /soap down in the mold it helps a lot and so easy to poop them out
These are gorgeous! They both came out beautifully!
Thank you so much! ❤️
That was wonderful. You technique and creativity with a good mold made for a gorgeous set. TU!
Could you please tell me when drying roses with silica crystals or sand dose there fragrance stay
I am always amazed that I never see pour lines on your stuff. I need the resin you use
Doesn't the resin just Flow out of the flower again once it's placed upside down and the mold not being filled some more?
Wow that looks gorgeous
I love them!! The black is so nice 🤩
Absolutely love these. I love doing resin stuff and you are AMAZING but I literally started following you because of your amazing hair! The colours are just... I’m so here for the colours! I know gay man stereotype much haha. I really love your art work, you have amazing ideas and I’ve learned so much from you! I only started doing resin lately, I’m more what someone would think of a regular traditional artist, that and digital, I did the profile pic for instance, but you really opened me up to new stuff so thank you so much.
I LITERALLY just bought these molds, they come today!
Have you thought about a vacuum chamber for the bubbles?
your eye make up is AMAZING!!
😫😭OMG how to I get color pour dye out of my mold! I did a pour and used the white and it sank right thru how do I remove it from the mold.
the orange coming through is actually so pretty! they look very halloweeny
I watched a video where they use uv resin just to “glue” the two part molds and to prevent from having also spilling resin as that annoying excess of it, making it easier to clean it up; I actually never tried this technique but, who knows... love your work of arts. :D
I like those molds better than the 2 piece ones. A pretty cool job I think! 💖👏 Don't it would be easy as I've never done one.
Hello EVERYONE, (OMG these videos are so cool!) I have a resin question and thought I’d look up the coolest resin channel on RUclips...and here we are! I had a bar made and the top is wood framed resin with beer bottle caps. Buuuuut I just went outside and it’s CRACKED! Do any of you creative geniuses know how that can be repaired?
If you put it on a luminated stand would it look nice?
Making a pokeball with these moulds would be so cool!
YES!!!! OMG that's all I want to do now LOL
Have u tried letting the flooded rose harden before flipping it. ?? I’m curious if that’s even possible and if it works for keeping that bubble out
Do you have any experience with using a vacuum setup to get bubbles out of projects?
Beautiful results! I'd like this with a small rose or bud. ❤
These are gorgeous. I have been eyeballing these molds, I may have to splurge.
Would using a pressure pot to pull out the air bubbles be something you could do for your type of casting? I don't do any resin myself but I've seen other crafters use a pressure pot to reduce bubbles in deeper or larger pours.
Oh they look AMAZING!
U should put it on top of 1 them lite base things. I'm not sure what thier called. The lite shinning threw the bottom of them would be beautiful.
I love your channel and I love your resin techniques but I’ve always wondered- what’s your favorite brand (s) of resin to use?
So pretty I'm a beginner ..at resin ..but I am an artist ..I love your work 💜💜🌹🌹
I love that these look like they're on fire
Large one is amazing!
Do you need to use a mold release with this type of mold?
Your bloopers at the end are what I live for 😭 Your energy is amazing and your personality really shows. Love this video! Keep blessing us with your amazing talent 👏🏼👏🏼👏🏼 FYI you are gorgeous 🥺
It kinda looks like it’s magnified. Would you suggest using a smaller flower?
FINALLY! Purchasing this mold ASAP
Awesome molds, thanks for sharing, and happy New Year
I read in the instructions for the Aaj Mold it said not to use the heat gun to pop the bubbles or it might stick to the silicone mold. I see you used a heat gun and I don’t know how else to see if there are any bubbles as it is an opaque blue mold! Any suggestions?!?
I have sort of a random question but is it possible to mix sented oils with resin?
They're so pretty! I would love to see one without glitter though. I love glitter but I think seeing the rose on it's own would be gorgeous 💜
Hi there I’ve come
Up with an awesome idea I wanted to share with you... to do the Petrie coasters with the ink to avoid blobs I put my white ink into a small spray bottle it’s great!!! Few sprays covers the surface perfect 😍
You’re really beautiful. And Your soul shines as bright as your personality ♥️
I liked them both , they r so pretty! I can't wait to get them for me!
I love you soo much , i dont even make resin art , but i love watching your video 🥺💓
I 💕 these!
Would love you to do an orange rose with of course glitter, can never have enough glitter, love your piece's and orange is my happy colour anyway.
There are a few men out there that do wood work and resin and have machines that help them buff there piece to a glorious shine. Nick Zammitti is one. Xxx
It looks like a rose made out of embers. Like a dying fire 🔥
How do you top coat your spheres!? I NEED help pleeeease
I think they both turned out beautiful 🌹🌹
How about a rainbow rose 😁
I have the ring prism holder mold, I love it! But I do wish it was a little thinner..for more rings to fit. But as a piece itself it’s so prettyyy