Kregs 40 Dollar Circular Saw Rip Cut Guide
HTML-код
- Опубликовано: 26 июл 2024
- Kregs 40 Dollar Circular Saw Rip Cut Guide
Kreg rip cut guide step by step assembly
Kreg rip cut guide demonstration
Kreg rip cut guide in action
Here's a link for the saw guide in the Kreg store on Amazon amzn.to/3qMv49g
Kreg K4 Pocket Hole Jig amzn.to/3DFdeg2
Kreg KMA2685 Rip-Cut Circular Saw Guide, amzn.to/3BSv9yy
Great projects start with high-quality cuts, and you can make those cuts-more easily than you ever imagined-using your circular saw plus the Rip-Cut™ Circular Saw Edge Guide. The Kreg® Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut w/ the confidence you want and the precision you need. The Rip-Cut™ easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut™ does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want-up to 24"-using the built-in measuring scale, and then make your cut. With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut™ makes it easier to cut down large sheets by yourself and is very easy to use. Simply mount your saw to the universal sled-it accepts most left-blade or right-blade saws-and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw.
Straight, accurate, repeatable rip cuts and crosscuts made easy
Make rip cuts and crosscuts up to 24 in. W
Cut multiple pieces to the same size with just 1-setup
Use the oversize edge guide for precise control throughout the cut
Eliminate need for marking, measuring and layout lines
Take your saw to the material instead of having to take your material to the saw
Universal sled accepts most circular saw left or right blade
Reversible edge guide for left- or right-handed use
Hey everyone! Thanks so much for stopping by my channel. I am so thankful for each one of you that have chosen to follow me along on this RUclips journey. If you aren't subscribed, I would love to have you here. Where I do how to videos tool and product reviews.
✅ Let's connect:
Follow me on Social Media:
Email: davesshop2@gmail.com
/ davesshop
/ davesshop2
tiktok.com/@davesshop
/ davesshop2
Channel URL:
/ dave’sshop
My RUclips #Shorts:
Will it Snow in Texas 2021 #shorts - • Will it Snow in Texas ...
Staining a Welcome Sign #shorts #varathane #DIY - • Porch Welcome Sign DIY
Ryobi’s cordless saw under 70 dollars #shorts - • Ryobi’s cordless saw u...
Ryobi Portable USB Charger under 25 dollars #shorts - • Ryobi Portable USB Cha...
What was your Christmas tool?? #shorts - • What was your Christma...
Toro 21 Recycler Unboxing Startup and Review - • Toro 21 Recycler Unbox...
🚀 Tools and Services, I recommend:
www.Tubebuddy.com/davesshop
Subscribe and click the notification bell 🔔 to be the first to see any of my new videos
✅ Recommended playlists:
Ryobi Tool Reviews
• Ryobi Tools
Milwaukee Tool Reviews
• Milwaukee
DIY Projects
• DIY Projects
✅ Popular Videos:
Ryobi Universal Miter Saw Stand Unboxing and Review
• Ryobi Universal Miter ...
Wen 18-Gauge 3/8 in. to 2 in. Pneumatic Brad Nailer Model 61721 review
• Wen 18-Gauge 3/8 in. t...
Milwaukee Polarized Safety Glasses/Home Depot Seeds Review
• Milwaukee Polarized Sa...
❤️Join Preferred Viewer Group:
Join my preferred viewer group it’s free just send an email to davesshop2@gmail.com and in the subject line add Preferred Viewer you will be one of the first to see any new videos or giveaways.
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support! Хобби
Thank you for making this Video ...buying one 2morrow ...Big Kia Ora (Thank you) from New Zealand ...
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Uu4rM7HnNpk/видео.html
Thank you for making this video. It helped me make my decision to get a Kreg. My goal is to increase the likelihood of making a straight cut. I am just cutting wood for shelves. Nothing that complicated of a job. Big Mahalo (Thank You) from Hawaii.
@kagadaza07, Hope your shelving project is a success. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/6-Ww69vGVls/видео.html
Bought this yesterday and used it several times. This was very helpful to make sure I got it set up correctly. Thanks
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/9FD8KPrtVAM/видео.html
thanks for the review.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Uu4rM7HnNpk/видео.html
Great job, Bud. Thank you for your time and knowledge
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
Thanks for the video good information 😄
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/v8pPcPy3xtM/видео.html
That is a great product. It would definitely make projects easier.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
I suggest checking to make sure the saw blade is parallel to the fence after installation. My rip cut fence is out of square to the rest of the jig by about an eighth of an inch per foot, so that I had to install it cocked on the base of the saw,
@haroldkahl4610, I haven't experienced that issue. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Uu4rM7HnNpk/видео.html
I am going to pick one up as a gift
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
I believe you shouldn’t have flipped over the front piece. With a curved front saw you want the curved side up
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/N0dKuBDYN7s/видео.html
I found using a couple of pieces of 2 x 4 to support the saw when assembling makes life easier.
@BrianGalyer Thanks for the tip I will try it. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/9FD8KPrtVAM/видео.html
Nice video. I followed everything you explained. That’s a plus.
Hi Thea, I am glad this helped. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/v8pPcPy3xtM/видео.html
Idaho - Precisely why I purchased this adapter. Got tired of the Big Box Stores near me having their saw out of order or no one there who was trained on how to use it. I'm left so I mark every cut and don't rely on the ruler. One thing to add, always take a couple of freshly charged batteries, that you have checked, with you when you need to make a sheet goods run. Don't ask me how I know this one.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/9FD8KPrtVAM/видео.html
How do you adjust/calibrate the width measurement? I assume you can adjust it to be able to use it with different saws and positions on the sled.
@ooltimu , The front clamp is lifted up and slide it along the rail to the measurement you want. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/e6LwuQhwrLg/видео.html
I have a small shop. I have a table saw and still rip with a handsaw to rip plywood in smaller pieces that is easier to work with on the table saw.
Hi Keith, I understand my shop is only 12x16 so I agree it's much easier and faster than breaking out the table saw sometimes. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/H14QEADCs0Q/видео.html
Just save me Dave thank you
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/UnlOn2RoicY/видео.html
Do you have to set the blade depth for the thickness of your board. Many thanks.
Mark Chadwick Staffordshire England
Hi Mark, Yes you do need to adjust the depth of the blade depending on the thickness of the wood you are cutting. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Qy1VzC2q5hY/видео.html
you should have put a square clamped to the guide before tightening the screws to make sure its perfect I put a blob of glue underneath as I won't take it apart and iv got a sacrificial saw on it so no need to remove it so I glued that as well lol
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/user/shortsn0fcyWeq9v
Florida
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/JEY0GbKaAic/видео.html
Great video. Thank you. Do you think that this guide would work with a jigsaw?
Yes.
Hi Energy, No it will not work with a Jigsaw. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/N0dKuBDYN7s/видео.html
Would it be possible to rip fence pickets with this?
Hi PearlPerlita, Yes I have used it to rip fence pickets. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/v8pPcPy3xtM/видео.html
@@DavesShop thanks will check it out
can you tilt the saw to 45 degrees while on the jig?
@Bruce, no unfortunately you cannot cut a 45 degree angle with this jig. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
and I don't think that saw is good enough the ryobi brushless 18v is great iv got your model and I find it struggling lol
@Kevin Ohara, I like the brushless model too but haven't had any issues with this model. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
$50 tool
@keithwilliamson236 Yup inflation they tell me. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/H14QEADCs0Q/видео.html
Seems like an expensive solution to ripping.
Hi Eric, I guess it depends on what you are comparing it to and that it is very portable.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/D9gSxSCZtqo/видео.html