Got some issues with my BNF that I want to address in an upcoming video about the Mobula 6 2024. My rates wasn't actually saving, I had issues with the Vtx, and rx was always disconnecting. I wanted to do a review but I ended up changing a lot of the betaflight side of things. Hardware-wise, I think it's pretty good. I have used these motors before and like them. The Aio is a little fussy (if you plan to use it for something else) but it works in the 65 31mm prop format. The camera is decent enough for me and so far the canopy is holding up - better than the betafpv light canopies. The frame is more flexible but I need to do more tests before making any good conclusions about it.
That’s a bummer. I’m waiting on one to get delivered. Hopefully, I don’t have that many issues, but it seems to be pretty common with bind and flys. I received an Acrobee65 with a busted camera. By the time Newbee replied, I had already soldering on a different camera. Then they tried offering to replace the card not the camera even though the video I sent them showed the camera not the card was bad. Then a couple weeks later the showed back up in my email offering a couple frames and camera stating they hadn’t watched the entire video I made just for the purpose of showing them what low quality trash they shipped. However, when it was flying, it was fun, but it was very hit or miss. I have a mobula 65 that shows up without a beta flight flash. They have yet to respond to the cli dumps for mo3 v1.0/1.1/&1.2 are all different as 1.2 isn’t posted. I’ve had great luck with the tiny hawk, and I was so impressed by the mob8 hd03 that I wanted to check the 6 out. Nice reflexes.
Thats quite a lot of issues. I am actually waiting for your full review for this product because I see plenty of jello on others youtube review, but no one really talks about it, and since stiffening part is your expertise (hachidori) i think you might be a able to notice the problem and fix it.
it is and I'm honestly disappointed - but as ill mention in that "review", my issues might be rare. on the other hand, I'm glad you caught on to the jello. I was defenitely expecting a better tune on his guy but I think the camera/canopy is also contributing a bit. Currently, my custom tune is doing alright but I've only flown it for 2 days so there's still lots to improve on.
@@im_ricebowlI got mob6 2024, have a bunch of issues as well. Out of 3 people who I know who bought mob6s not a single one has no problems with it. At this point even HM said that they hurried up too much with it so, on paper it’s very good, in reality everybody has a SHIT ton of problems with it. One of my friends who got scammed on mob6 (got a refund after) is already happy that he didn’t get it haha
I love this song so much
Got some issues with my BNF that I want to address in an upcoming video about the Mobula 6 2024. My rates wasn't actually saving, I had issues with the Vtx, and rx was always disconnecting. I wanted to do a review but I ended up changing a lot of the betaflight side of things.
Hardware-wise, I think it's pretty good. I have used these motors before and like them. The Aio is a little fussy (if you plan to use it for something else) but it works in the 65 31mm prop format. The camera is decent enough for me and so far the canopy is holding up - better than the betafpv light canopies. The frame is more flexible but I need to do more tests before making any good conclusions about it.
That’s a bummer. I’m waiting on one to get delivered. Hopefully, I don’t have that many issues, but it seems to be pretty common with bind and flys. I received an Acrobee65 with a busted camera. By the time Newbee replied, I had already soldering on a different camera. Then they tried offering to replace the card not the camera even though the video I sent them showed the camera not the card was bad. Then a couple weeks later the showed back up in my email offering a couple frames and camera stating they hadn’t watched the entire video I made just for the purpose of showing them what low quality trash they shipped. However, when it was flying, it was fun, but it was very hit or miss. I have a mobula 65 that shows up without a beta flight flash. They have yet to respond to the cli dumps for mo3 v1.0/1.1/&1.2 are all different as 1.2 isn’t posted.
I’ve had great luck with the tiny hawk, and I was so impressed by the mob8 hd03 that I wanted to check the 6 out. Nice reflexes.
how is he so quick wit it
Thats quite a lot of issues.
I am actually waiting for your full review for this product because I see plenty of jello on others youtube review, but no one really talks about it, and since stiffening part is your expertise (hachidori) i think you might be a able to notice the problem and fix it.
it is and I'm honestly disappointed - but as ill mention in that "review", my issues might be rare.
on the other hand, I'm glad you caught on to the jello. I was defenitely expecting a better tune on his guy but I think the camera/canopy is also contributing a bit. Currently, my custom tune is doing alright but I've only flown it for 2 days so there's still lots to improve on.
@@im_ricebowl I see. I am very interested in superX FC since it is very lightweight!
@@im_ricebowlI got mob6 2024, have a bunch of issues as well. Out of 3 people who I know who bought mob6s not a single one has no problems with it. At this point even HM said that they hurried up too much with it so, on paper it’s very good, in reality everybody has a SHIT ton of problems with it. One of my friends who got scammed on mob6 (got a refund after) is already happy that he didn’t get it haha
Smolboi