Im very impressed with this little DeWalt so far. Ive sunk it twice in a pond and a ton of mower starts on top of normal use. Also have rigid and Milwaukee drills/impacts but very little abuse. Sadly they r all owned by the same chinese company.
Moondog 1 yah good drills but they a lot of money. If you want them to last man, you gotta take it easy with them. Lol. What I mean is (only use em for what they are intended for) I still have one of my drills I bought back in 2005. Works like new man.
Tyler Binkowski every fucking day pal! I won’t fucking destroy my expensive ass Dewalt and Milwaukee drills by starting a lawn mower with em! Guy probably got metal shavings and stuff rattling inside that drill from using it to start that mower. He just don’t know cause he can’t hear. I took apart a drill that was extremely bad shape but the user didn’t know because he couldn’t hear the shit rattling inside when he used it. I work for towing and recovery. Everyday I’m in the shop working on big trucks, cars, etc. I’m a operator though. I drive a 75 ton rotator wrecker. When I do towing, I have to take off the drive shaft, sometimes axles. A drill is required for that. I own a bunch of drills over the years. I use my drill everyday pal
I had one that needed the spark plug to be removed aswell. Things happened and I had to get rid of it. Chargers were pressed. No further information will be given.
Long time ago, I remember my dad asking me to hold the spark plug and see if it lights up. I lit up like a Christmas tree and pissed myself, I was 4. I am now a 20+year experienced small engine guy lol
You can use a long screwdriver by touching the spark plug tip with plug boot removed of course, and ground the handle end of the screwdriver on engine case (earth) as a kill switch too it saves you removing plug wire everytime
I've been helping this older gentleman downt eh street from me he has an antire yard of mowers tractors trucks and engines he wanted me to help him get them running so I said yes this guy gave me a trailer and said 3 lawn mowers a day for a week and the trailer and presure washers yours
Been using on my Melanie front reel brigs Stratton (vertical )for years this way. Only prob is it cranks governor way up and I run the yard like a mad man at full speed
DeWalt really need to address this issue. I use to work 200-300 feet up and I'd use my big impact all the time only issue is that dam ball and spring would not keep the socket properly on all of the time.
This will kickback and break your drill shaft into,it done it to my brand new dewalt 20 volt half inch drill driver combo,and that big socket flying out through the yard hits somebody in the mouth or kills your dog, it's all fun and games, it's not a matter if it will break, it's when it will break, I thought the same thing until that think recoilled back and broke my drill motor shaft into, have fun be careful
No doubt, or it will break your wrist if you're not a big dude. Bosch supposedly makes a drill that releases before kickback can damage anything, but for the price you can just buy a new mower.
BEWARE OF PROJECTILES!! AND rope that is too long. I wrapped the rope around the pulley too far and the motor took off with it when I started it, tangling the rope and taking the throttle cable with it. Luckily, the cable wasn't attached to the throttle yet, or the pull and acceleration from that might have made a bigger mess. It tore my hand up when I reached for the kill switch that was right next to the open fan blade swinging the rope and metal throttle cable until it got too twisted and tore itself off. Then, it was clear to hit the switch. That 301cc motor, man. My hand was swollen like a red balloon.
Reduce the slipper clutch torque on the drill, and turn the mover to tdc so it won’t kick back. If y’all think this is dangerous I bet you haven’t seen how many people straighten bent mower cranks with a sledge hammer/floor jack. Cast iron isn’t known for its malleableness- if it cracks the spinning blade will be ‘set free’ quite violently
All the danger comments crack me up. Most of my videos are unlisted videos of me falling off a dirt bike or atv trying to wheelie or shooting videos. RUclips is soft.
I prefer to give the Blade a quick spin by hand - danger of flying sockets then averted. (just because we know there are people out there that might take this as actual advice - please note ..... this suggestion is not serious .... you may lose your fingers and your mower might take off). Be sure to shout "contact" if you decide to exercise your lack of intellect.....it will embellish the experience for onlookkers.
I just picked up a JD L110 for $400. I hope I don't have to drill start it..... The mower in the video puked all the oil out the muffler and lost compression. RIP free mower. Got a couple years out of it!
Wait till that socket bops you in the nose and breaks the oakleys off yourface. But yet i still impact start my old 18 horse generators and anything else missing a starter haha.
Спорт
![Young Nudy - John Wayne (feat. Metro Boomin) [Official Video]](http://i.ytimg.com/vi/NY8HnYYo2fo/mqdefault.jpg)
Also known as, how to break your wrist.
You aren't wrong!
Fahrzeug auch der book FC g
Kugrgzgzgfvgvtcrhu
I Cally my drill the wristy twisty
@@the_fonz_hd2702 mines branda
A great way to break your drill 👍🏼
Im very impressed with this little DeWalt so far. Ive sunk it twice in a pond and a ton of mower starts on top of normal use. Also have rigid and Milwaukee drills/impacts but very little abuse. Sadly they r all owned by the same chinese company.
Moondog 1 yeah don’t wonder when you found out you broke the gears inside of it
Moondog 1 yah good drills but they a lot of money. If you want them to last man, you gotta take it easy with them. Lol. What I mean is (only use em for what they are intended for) I still have one of my drills I bought back in 2005. Works like new man.
JacksonGuitarPlayer 97 you must not use your drills enough...
Tyler Binkowski every fucking day pal! I won’t fucking destroy my expensive ass Dewalt and Milwaukee drills by starting a lawn mower with em! Guy probably got metal shavings and stuff rattling inside that drill from using it to start that mower. He just don’t know cause he can’t hear. I took apart a drill that was extremely bad shape but the user didn’t know because he couldn’t hear the shit rattling inside when he used it. I work for towing and recovery. Everyday I’m in the shop working on big trucks, cars, etc. I’m a operator though. I drive a 75 ton rotator wrecker. When I do towing, I have to take off the drive shaft, sometimes axles. A drill is required for that. I own a bunch of drills over the years. I use my drill everyday pal
The spark plug wire, that’s my off switch lol
I appreciate the view and it made me laugh again. Thanks!
I had one that needed the spark plug to be removed aswell. Things happened and I had to get rid of it. Chargers were pressed. No further information will be given.
I got the same thing for my leaf blower 😆
Loonatic, that made me laugh hand nearly doing a 360° then sling shots the socket 30 feet
Too bad the mower died. It puked all of its oil out of the muffler. Zero compression almost now.
Monkeyman laught?
Dont SHAKE HANDS WITH DANGER
🚨
One of my safest videos!
Moondog 1 😊
Bru lol that video 😆
Shake hands with danger animated guy that I don't know he used to laugh at safety but now they call him three finger Joe
Only the unchosen break their wrists, this man is The Chosen One ☝️ May the Green and Gears be with him
It cracks me up that starting a lawn mower with a drill is my most dangerous video based on the comments
@@moondog1677 still is
“Op no that’s my off switch” 😂😂😂🤣🤣🤣💀💀💀💀💀
😂 lmao "that's my off switch
Thanks for watching! I got another laugh out of it.
Long time ago, I remember my dad asking me to hold the spark plug and see if it lights up. I lit up like a Christmas tree and pissed myself, I was 4. I am now a 20+year experienced small engine guy lol
That’s the funniest thing I’ve seen in a long time!! It reminds me of myself and how pissed I would be!! I needed a good laugh 👍
Syeyrfuyr
Really smart guy
Definitely!
You can use a long screwdriver by touching the spark plug tip with plug boot removed of course, and ground the handle end of the screwdriver on engine case (earth) as a kill switch too it saves you removing plug wire everytime
He could've broken his wrist
Wouldn't be the first or last time!
With a drill lmao
True
Not really if he used the clutch on the drill
Also a free way to brake your arm or wrist and or drill
I'd say you got your moneys worth out of that one for sure lol
That socket almost knocked you out
When you’re really southern and your crank breaks off your lawnmower, so you have to improvise
Off switch is cracking me up
I did that on a 3hp rototiller. Best modification on a $30 tiller I got running
I've been helping this older gentleman downt eh street from me he has an antire yard of mowers tractors trucks and engines he wanted me to help him get them running so I said yes this guy gave me a trailer and said 3 lawn mowers a day for a week and the trailer and presure washers yours
The drill bit went aight imma head out
That’s genius
The ultimate socket thrower
I can't believe that thang ran with the rusty ass spark plug lmao. 😂
My hero
Ooh a lawn mowing socket thrower
Still it’s a great way to quickly start a mower without destroying it due to anger
That’s my off switch I love it
I love screwed up lawnmowers so much
Flying socket is going to knock his teeth out next time
Whatever gets the job done
Very nice to start engine nice work
Been using on my Melanie front reel brigs Stratton (vertical )for years this way. Only prob is it cranks governor way up and I run the yard like a mad man at full speed
I've done something like that with a 440 sled needed a much bigger drill though one of those old masonry drills they weigh like 45 lb
That socket almost became final destination lolol
Haha. Imma have to do this with my tiller.
Wowzerz bro 😂
That's how I used to start an old power washer
Time for a new lawn mover
So much for good connection to the spark plug
Off switch*
You can afford DeWalt but can't get another mower
It's a new yard. First few mowers are going to have a hard life!
DeWalt really need to address this issue. I use to work 200-300 feet up and I'd use my big impact all the time only issue is that dam ball and spring would not keep the socket properly on all of the time.
Seems safe!
The Socket Slinger™️
Mines still got the pole starter, but I have to shut it off by choking the carburetor with the throttle
The socket died another way but he ain’t dying from the lawn mower
He’s a blue collar brother. He’s got some strong wrists.
Thanks!!! Appreciate that! It'll definitely try to take u on a little ride!
This will kickback and break your drill shaft into,it done it to my brand new dewalt 20 volt half inch drill driver combo,and that big socket flying out through the yard hits somebody in the mouth or kills your dog, it's all fun and games, it's not a matter if it will break, it's when it will break, I thought the same thing until that think recoilled back and broke my drill motor shaft into, have fun be careful
He just picked up a JD L110 that doesn't work so stay tuned for more great lawn mower content!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@@eyeofth3b3hold3r,
No doubt, or it will break your wrist if you're not a big dude. Bosch supposedly makes a drill that releases before kickback can damage anything, but for the price you can just buy a new mower.
Will be a trip to the dentist when socket knocks out a tooth
Kills your dog, dude that socket wasn’t even going that fast?
I have one of those lawn mowers
It's just green and covered in oil
This dude said that’s my off switch lol
I start my lawn mower the same way. I have a video on my channel Of it. That’s cool to see in the wild
Got a link?
@@moondog1677 ruclips.net/video/QMALaiSt0Wg/видео.html
@@moondog1677 yeah I got you
@@moondog1677 yeah I got you
Perfect example why I use a locking socket adapter so that socket don't come off a and kill me
That would be awesome to do something like that
When in doubt try it out 👍
Works lika charm
Damnn I have to do that to my go kart sometimes
We got us a mouth breather!
I need it
Are u using a regular socket to start your mower or a Engine Starter Drill Bit Adapter?
Whatever floats your goat
Socket: Ight Imma head out
wtf 😂
Dude your off switch is rusty, but I see it works
Air Gulp clayton POWER'S
I am doing it the same with mine!
BEWARE OF PROJECTILES!! AND rope that is too long.
I wrapped the rope around the pulley too far and the motor took off with it when I started it, tangling the rope and taking the throttle cable with it.
Luckily, the cable wasn't attached to the throttle yet, or the pull and acceleration from that might have made a bigger mess.
It tore my hand up when I reached for the kill switch that was right next to the open fan blade swinging the rope and metal throttle cable until it got too twisted and tore itself off.
Then, it was clear to hit the switch.
That 301cc motor, man.
My hand was swollen like a red balloon.
😬
Reduce the slipper clutch torque on the drill, and turn the mover to tdc so it won’t kick back.
If y’all think this is dangerous I bet you haven’t seen how many people straighten bent mower cranks with a sledge hammer/floor jack. Cast iron isn’t known for its malleableness- if it cracks the spinning blade will be ‘set free’ quite violently
All the danger comments crack me up. Most of my videos are unlisted videos of me falling off a dirt bike or atv trying to wheelie or shooting videos. RUclips is soft.
I prefer to give the Blade a quick spin by hand - danger of flying sockets then averted. (just because we know there are people out there that might take this as actual advice - please note ..... this suggestion is not serious .... you may lose your fingers and your mower might take off). Be sure to shout "contact" if you decide to exercise your lack of intellect.....it will embellish the experience for onlookkers.
Still have it
Nope I bought a $400 jd riding mower made in china. It cost twice as much as my car. No joke.
I’ll take it
Is it gone yet and where do I pick it up
That’s my off switch 😂
imma try this lol
Hold on real tight!
I still credit this technique to project farm
That's exactly where I saw it first!
Thats my off switch 😂
Tive a mesma ideia quando meu cortador de grama husqvarna quebrou
What size bit is the
Can’t kill a flat head Briggs
Awsome
Enginie b&s 450???
No idea she gone!
Thats sum nascar shit right there i tell u what!!
Love it
Hey can you let me know what the mower REI
Wow Lol Cool
Seems very save
Many safe!
Much precautions
Well that's 1 way to fire up the lawnmower
that's one way
Drill sergeant
Free socket with mower.
Or was that socket free?
What number socket
15/16"
@@moondog1677 thanks dooode
The one that fits
I gave away one just like this Sunday
Lmao!!! Nice
What do you think we're all 8!!!! 😂
Gangsta
I alway do this with a ratcheting adapter on the drill so i dont break my wrist
Soooo safe!
I had to use a drill and socket to start my 2020 cub cadet when I was waiting for a new starter. It’s a bitch but it works. I think this is funny
I just picked up a JD L110 for $400. I hope I don't have to drill start it..... The mower in the video puked all the oil out the muffler and lost compression. RIP free mower. Got a couple years out of it!
Focus dude by team dracmo
Make sure to pull the drill off the mower whilst the drill is still spinning otherwise it'll kick.
Wait till that socket bops you in the nose and breaks the oakleys off yourface. But yet i still impact start my old 18 horse generators and anything else missing a starter haha.
When do I get my Oakley's?! I just got my power company chainsaw glasses.
Nice jer