Did I miss something? Let me know in the comments! +5 BBs Trick Video: ruclips.net/video/RzcnWI_t-Sw/видео.html My Instagram: instagram.com/alpha.4.as/ My Facebook: facebook.com/Alpha4AS/
Hi Alpha, thank you for showing your way to clean! I like you vid. What about using a lighter background? It is difficult to see the black part on black background. Keep on and best wiches!
Very Helpful. Thank you 👍 Getting back into Airsoft after a very long time. Going through my Airsoft Collection that I built up from 2009 to 2014. I have quite a few nice items 😎👍 These are the GBBs I have in my Collection - WE M4 Closed Bolt (2 of these) WE M16 Closed Bolt CO2 (2 of these) WE 416 Closed Bolt WE Scar L Tan Closed Bolt (2 of these) WE Scar L Black Open Bolt VFC MP5 (3 of these) VFC MP5K (2 of these) GHK AKMS KWA Kriss Vector KSC Folding Pocket G un with Glock 18c KSC Glock 18c (2 of these) Didn’t realise KWA Kriss Vector had become so Rare. Mine is still new in Box 😁 I will use the VFC MP5s in Games, they are the most Reliable to use. Thank you again, regards from South Africa 🤘
Hey Josef! You are awesome. I did this trick on all of my mags except one. I could not get the mag out from the housing. its stuck after a cm or so. I even tried to hammer it carefully but nothing. do you have any suggestion how could I get the mag out from the housing?
I'm probably not gonna get any help, but I'm going to be getting a gas gun soon but not sure what to go for. KJW OR WE because I know RAtech makes parts for WE but not sure if KJW has the same parts support?
Are these magazines reliable? I'm building a WE L85A2 and I really want to buy other magazines but considering they are on the pricey side I want to know there longevity.
Přesně tohle tady chybělo. Skvělé video...a ani nevadí, že je anglicky. Určitě palec nahoru. Pokračuj v tom určitě dál. Myslíš, že by byl problém udělat podobné videjko ale s WE SCAR nebo WE M4 ?? Člověk se rád přiučí a inspiruje :-). Perfektní !!!!
Did I miss something? Let me know in the comments!
+5 BBs Trick Video: ruclips.net/video/RzcnWI_t-Sw/видео.html
My Instagram: instagram.com/alpha.4.as/
My Facebook: facebook.com/Alpha4AS/
Hi Alpha,
thank you for showing your way to clean! I like you vid.
What about using a lighter background? It is difficult to see the black part on black background.
Keep on and best wiches!
One of the best gbb channels I've seen. Congratulations, man.
Came here over Novritsch. Perfect explanation, good other content! +1 sub. Keep it up!
Very Helpful. Thank you 👍
Getting back into Airsoft after a very long time.
Going through my Airsoft Collection that I built up from 2009 to 2014.
I have quite a few nice items 😎👍
These are the GBBs I have in my Collection -
WE M4 Closed Bolt (2 of these)
WE M16 Closed Bolt CO2 (2 of these)
WE 416 Closed Bolt
WE Scar L Tan Closed Bolt (2 of these)
WE Scar L Black Open Bolt
VFC MP5 (3 of these)
VFC MP5K (2 of these)
GHK AKMS
KWA Kriss Vector
KSC Folding Pocket G un with Glock 18c
KSC Glock 18c (2 of these)
Didn’t realise KWA Kriss Vector had become so Rare.
Mine is still new in Box 😁
I will use the VFC MP5s in Games,
they are the most Reliable to use.
Thank you again, regards from South Africa 🤘
Thanks a lot for this guide. I'm jumping over to a GBBR and this will help a lot 💪
GREAT VIDEO! very helpful. thanks for your work
Hey Josef! You are awesome. I did this trick on all of my mags except one. I could not get the mag out from the housing. its stuck after a cm or so. I even tried to hammer it carefully but nothing. do you have any suggestion how could I get the mag out from the housing?
I'm probably not gonna get any help, but I'm going to be getting a gas gun soon but not sure what to go for. KJW OR WE because I know RAtech makes parts for WE but not sure if KJW has the same parts support?
Are these magazines reliable? I'm building a WE L85A2 and I really want to buy other magazines but considering they are on the pricey side I want to know there longevity.
Sakra. nechal jsem se clickbaitnout. Žádný čištění střelákem: )
Přesně tohle tady chybělo. Skvělé video...a ani nevadí, že je anglicky. Určitě palec nahoru. Pokračuj v tom určitě dál. Myslíš, že by byl problém udělat podobné videjko ale s WE SCAR nebo WE M4 ?? Člověk se rád přiučí a inspiruje :-). Perfektní !!!!
Ahoj, diky moc! Urcite budu pokracovat a scara a vlastne vsechny WE plynovky mam v planu udelat i srovnani co u ktery je dobry a na co si dat pozor :)
@@JosefMucha100 Tak to se na to moc těším, protože sám od WE vlastním M4, SCAR-L, G39C a 3 x G17. Držím palce a fandím při hraní :-).
Josef what's that gas you fill in your mags? :)
I'm using propylene (MAPP Pro) in winter and propane in the summer.
How often would I have to do this on my Mags?
probably once a year if you see that your mags don't feed properly anymore. Otherwise it's not really necessary.
hi , can you advise the diameter of o ring which is in inlet valve (small one)?
Excellent video!
Can I please links to your custom magas ?
Josef Mucha could you share the silicon oil brand name?
I don't care about the brand. Silicon oil will always be just a silicon oil. Just don't overdo it.
Good
Don't use silicone oil, super lube ptfe grease. Don't upload a video on something you know nothing about.