This applies to drills too! I watched the electricians apprentice rip the meat between his thumb and pointer finger out with the chuck on the hole hawg while he was changing bits! It was not a pretty sight! 😮 😢
Hey Roby, you might reach out to Curtis at Cutting Edge Engineering Australia . If anyone had any information on your new lathe, it would be him. Or he would know someone who did.
@@timkaldahl Yup, I'm already invested into my Makita stuff, and it treats me just fine besides they will have anything "new" in a year or two anyway!
FYI you have a lathe you can make any part you need for it with it. You also have a mill you can make every part you will ever need. You just have to find a machinist to run them.
On the lathe gear, the typical method for gear repair is to braze up the misssing and teeth and recut them. Helical gears are tricky to cut though, but if you’re careful with grinders and files, you can actually do a good job by hand, the the nice thing with the braze is it will run in over time if you don’t get the tooth profile exactly right.
My first Milwaukee set was the nickel battery. They still worked but couldn't get the batteries for them . The Red was kinda pink but they worked. Love my new Milwaukee set and just add to it when new M18 stuff comes out .
Robby your team amazes me! They never give up, and I believe they would have gotten it running if given more time before you got back! Team work makes the dream work as they say, and you've got that team! Catch you on the next. ✌️ 😊
Demri's happiness and laughter starting at 3:19 made me so happy. I'm very pleased to see you looking happy again. Hillbilly I don't blame you for being unhappy with the wasps, I'm very allergic to bees, wasps etc and would be so far away once I saw one.
if Milwaukee has that integrated wrench for their Angle grinders.. I think I'm gonna have to convert! ALso love the Electric cart. Go hill billy go! You the man.
Colton, your idea with a flying bug will work, unfortunately you picked the wrong bug. Try doing it with a junebug, I was raised like a real hillbilly and that's what we used to do for entertainment... 👍
When I was a kid, my older brother built a wooden go-cart too. But we had a gas engine on it. this was back in 1957. I like Demri's idea for the wooden car too.
I read a book when i was a kid called “To know a fly”. it described how to fly a fly by attaching a thread to the fly using wax. Worked great. Wasp flying brought back some childhood memories.
Fine tunning on the steering,camber ,toe and castor,add some old valve springs for suspension in the front end ,add sime gears to the steering so its not so hard ro steer,then will come the safety cage ,seat belts ,foot control for the throttle,and mayve add some simple wooden block brakes ! Morgan cars from Great Britain have wooden chassis,so your cart has great beginnings. Now q time ,where is dejablue jeep ,it seems like it doesn't what ro leaves Matts place ,have you not filled out the Adoption forms ? Eugene was told to be careful with that Axe , Robby be careful with that Lathe .
I'd say Hillbilly Demri, and Colton are doing a way better job than me on the wooden car. May be unconventional but it works. Great Job Yall love the videos keep it up.
Man oh Man.... see you guys in SEMA on that thing... you going candy apple, tiny flake, super gloss on them 2x4's. Remember no bondo.... you have to pull those dents. Digging the Demri hood ornament in the Merica shirt.
I shook my head as soon as I saw the thumbnail! The Demri build videos are my favorites. We need more! Once is year is just not enough!!!
This old fella is sure glad Demri is back to herself. I love your laugh and beautiful smile BOSS. Just keep them coming ❤
I knew if I watched this channel long enough Robbie would do an electric car. Wooden to boot.
The boss has all the cool builds
Demri, you are delightfully hilarious and so entertaining. Love your laughs!
COLTON MY DUDE TRYING TO FLY A WASP 😂😂😂😂😂😂
Demri makes the videos, her laugh is infectious. Coltons pet wasp was hilarious. 😅😅😅😂😂😂
Didn't shake my head at the wooden car. I shook my head at the Wasp on a string. I've seen that done with moths, not something that stings.
Adam Savage from MythBusters (Tested on RUclips) is a huge Shenwai lathe nerd. I bet he would know exactly how to help a fellow RUclipsr.
You need to add this as its own comment , not many people check comments on comments...
Growing up in California we had Japanese beetles we would do it to. Lol
You have the best team on RUclips buddy. They all work well together and seem to really care about the projects. Thank you for the great videos.
With Sean involved it will be MUCH better 🤩 You just need to get Milwaukee to build a wooden car motor 😂🤣😂
Lathe safety tip. Do not leave the chuck wrench in the chuck. Believe it or not people will turn on the lathe with it still in and send it flying .
This applies to drills too! I watched the electricians apprentice rip the meat between his thumb and pointer finger out with the chuck on the hole hawg while he was changing bits! It was not a pretty sight! 😮 😢
It's so nice to hear Demri laugh and smiling. She's a great and beautiful woman
Enjoyed the creative wood car build. What a team! Thank You Robby for the Milwaukee tool tour.
Fred and Wilma now have a motorized car! Love you guys!
Robby is such a great ambassador for Milwaukee tools I want it all 😭
Good to see Demri having fun 😀
Shawn, thinking what have I got myself into.
Hey Roby, you might reach out to Curtis at Cutting Edge Engineering Australia . If anyone had any information on your new lathe, it would be him. Or he would know someone who did.
It's Nice to see grown adults have fun with just simple stuff and say what you want you all learned something so good vid Chris
8 SIDES IS OCTAGON 37 MIN 20 SEC
Not according to robby...lmao
WHAT you started Derby cars at 10 years old !! Robby you definitely don't look over 32. And all the car needed was Robby's experience in building
he is 34 years, born in 89
I was a bad boy and skipped over some Milwaukee stuff to get back to the car.... 😁
Don't feel bad I did to.
Me three.
Yup, I'm in another line and even though the Fuel line us awesome I'm not starting over from scratch. My Makita tools work very well, thankyou.
I did too. 😁
@@timkaldahl Yup, I'm already invested into my Makita stuff, and it treats me just fine besides they will have anything "new" in a year or two anyway!
Sean is obviously the adult here! Y'all are having WAY too much fun! Well, ya know what they say, "When the cat's away the mice will play!" 🤣
Colton seems like a tv presenter. He's like the university professor explaining the nitty gritty in the operation.
FYI you have a lathe you can make any part you need for it with it. You also have a mill you can make every part you will ever need. You just have to find a machinist to run them.
The steering you should have adjuster caster a few degrees.. it would turn way better!!
That's pretty cool can't wait to see it finished
I shook my head the second I heard 2x4 . Soft pine wood is not durable enough, plus no glue on the joints so I'm certain it will fall apart quickly.
My father used to do that with horse flies with thread. 😂 that brings back some memories.
As a long time fan, there are no “shake my head” moments…..Robby can fix anything
Yep, when the cats away, the mice will play. You guys are nuts, ha, ha. Thanks for the video.
Man that G-wagon is still sitting there. waiting for the insurance to get their crap together?
Yes it’s a mess but that’s insurance for you!
@@RobbyLayton that sucks for both you and the customer. Idk how you put up with it your patience must be extreme
On the lathe gear, the typical method for gear repair is to braze up the misssing and teeth and recut them. Helical gears are tricky to cut though, but if you’re careful with grinders and files, you can actually do a good job by hand, the the nice thing with the braze is it will run in over time if you don’t get the tooth profile exactly right.
My 69 Charger you are building will not fail because you guys rock and will get it right the first time
I didn't know they were building two Chargers?😂
Dan your lucky today ..they just installed a milwaukee 10.000 in it
Thay is the most Fred Flinstone thing I have seen in a long time, makes me kinda want one 😂
I wish I could afford them tools
My first Milwaukee set was the nickel battery. They still worked but couldn't get the batteries for them . The Red was kinda pink but they worked. Love my new Milwaukee set and just add to it when new M18 stuff comes out .
Robby made milwaukee look extra good today...their my choice on power tools for sure..you can't wear them out
With everyone building the wooden car, running into difficulties either the drive…. Robby came back and fixed it! You the man Robby!🤙😎
Van harte gefeliciteerd Marcel je lacht je recepten goed en duidelijk uit kan niet wachten naar je nieuwe recepten 🎉🎉😊
Demri is 🔥
Sean is amazing. What an addition. The guy is a fabricating wizard.
Jason Lang in Hector MN could rebuild that gear ⚙️. He rebuilds gears ⚙️ for steam tractors 🚜 so he should be able to build a gear ⚙️ for a lathe
When does Demri get her own channel? She rocks on camera!
Love Demri videos haha. Such fun
Sean. Is. Awesome.
That’s an awesome powered Milwaukee wooden car so now let’s finish the tow truck
Tow truck starts next Sunday
many people are saying, if you light the wood on fire before screwing it, it wont split.
It is wonderful to see you folks play!
Aw,i remember the fourth grade, we pulled it with a lawnmower!!!!and a wagon behind,king o lawn mower.
If you rotate your front wheel assemblies backwards a few degrees, ( 11°-15°) your steering will improve drastically
thanks for the best Milwaukie commercial ever !
Robby your team amazes me! They never give up, and I believe they would have gotten it running if given more time before you got back! Team work makes the dream work as they say, and you've got that team! Catch you on the next. ✌️ 😊
Now the Utah state police will show up and write some tickets. 😮😮😮
Now you guys need to build a wooden bike 😅
"It Aint Got No Gas In It" !! NICE!
That Milwaukee light is awesome would work on hoist when working under a car
That was a really fun video. 😃👍🏻
Demri's happiness and laughter starting at 3:19 made me so happy. I'm very pleased to see you looking happy again. Hillbilly I don't blame you for being unhappy with the wasps, I'm very allergic to bees, wasps etc and would be so far away once I saw one.
What you have here is the reason the channel works. “TEAM WORK”
Demrey got this she’s a pro it’s going to be a race woodcar 💪🏎️👊
Demri, I love your hair, you look adorable!
if Milwaukee has that integrated wrench for their Angle grinders.. I think I'm gonna have to convert! ALso love the Electric cart. Go hill billy go! You the man.
Colton, your idea with a flying bug will work, unfortunately you picked the wrong bug. Try doing it with a junebug, I was raised like a real hillbilly and that's what we used to do for entertainment... 👍
Also use sewing THREAD and not the heavier Kite string...
Now that is some fun going on there.
robby was at the milwaukee tool office 5 miles away from me and I didn't get to meet him 😢
8 sided hexagon??? 😂😂😂 oh Robbie
Last year when they tried and when they started watching to day and seeing Sean's face when he asking himself what the he'll going on
You should try the string on a Japanese beetle.30% more up lol. you are a great crew.
I installed battery blocks for Milwaukee batteries for our NOS bottle heaters.
Maybe u can put those in for spare juice?
When I was a kid, my older brother built a wooden go-cart too. But we had a gas engine on it. this was back in 1957. I like Demri's idea for the wooden car too.
I shook my head when Robby milled 8 sides on the drive shaft... He needed 6
Used to do the bug on a string thing when I was a kid, but we used thread on a dragonfly.
Great job again.
Awesome!!!
You all have inspired me to try to build a wood car. Lol!
12:00 light is pretty sweet. However, I know it's going to be $$ bc the smaller version is in the 200 range
I shake my head at all the silly things you guys get into. I really enjoy watching your videos.😊😅
Hey Robby, Try getting that gear fixed, there are places that will weld in some metal and machine out the teeth....Goos luck with the fix.
I read a book when i was a kid called “To know a fly”. it described how to fly a fly by attaching a thread to the fly using wax. Worked great. Wasp flying brought back some childhood memories.
Ita an improvement on the last one so they are gaining and it is fun to watch.
Keep up with the good work love watching you on RUclips God bless
Fine tunning on the steering,camber ,toe and castor,add some old valve springs for suspension in the front end ,add sime gears to the steering so its not so hard ro steer,then will come the safety cage ,seat belts ,foot control for the throttle,and mayve add some simple wooden block brakes !
Morgan cars from Great Britain have wooden chassis,so your cart has great beginnings.
Now q time ,where is dejablue jeep ,it seems like it doesn't what ro leaves Matts place ,have you not filled out the Adoption forms ?
Eugene was told to be careful with that Axe , Robby be careful with that Lathe .
Switch those sprocket around and you'll move out just fine
Do you EVEN get anything done at the shop? 😂 I love watching this channel, you folks keep me in stitches with all the shenanigans you come up with.
Usually if you pre drill the hole before you put the screw in it Dosent splint
The wood car is called " BAM BAM"
I stopped shaking my head with the broncstar build lol
Cool project!
I can tell Colton was a jackass(the tv show) watcher when he was younger, the pet bee was a skit in the 1st movie.
I'd say Hillbilly Demri, and Colton are doing a way better job than me on the wooden car. May be unconventional but it works. Great Job Yall love the videos keep it up.
You need to tilt your front axils back a little so they don't give you that death wobble!
Man oh Man.... see you guys in SEMA on that thing... you going candy apple, tiny flake, super gloss on them 2x4's. Remember no bondo.... you have to pull those dents.
Digging the Demri hood ornament in the Merica shirt.
Shook my head reading the title. And still shaking my head🙄
Love y'all ya crack me up!
Robbie, you have to go to Matt's and help repair the damage to the spud truck cab.
I was laughing, when the white board came out, but i never started shaking my head..
I know the Boss has it under control.😂🤣😂
Why do I feel like I just watched a very elaborate Milwaukee tools commercial lol
I’m not sure 🤔:)
@RobbyLayton all my stuff at home and work is all Milwaukee. Can't beat it
I like the Freres wood sticker on the front. Wonder how that got there.
I am definitely building one for my kids...AKA me and my wife 😊
I started shaking my head LAST time, now it's full belly laughter! Love it tho!